Obdelovalni center z gnezdilno mizo

BIESSE ROVER B FT 2243

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Predpfx Aeu R Szasmfea Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Includes: - Column-mounted slewing crane BARBARIC Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 100 kW (135,96 KM), število osi: 2, skupna masa: 219 kg, dolžina mize: 1.200 mm, širina mize: 900 mm, Oprema: CE označba, dokumentacija / priročnik, 1290 is a professional laser cutter designed for serious production work. It features a continuous table, allowing you to cut materials and fabric rolls of any length. The Wattsan CNC laser machine is engineered for 24/7 operation in series production. The Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, and more. This model includes a unique feature: you can remove the front panel to utilize the freed space for cutting sheets and material rolls. It’s also equipped with a waste collection tray, making operation much more convenient. Contact our managers for further details! Wattsan 1290 ST Specifications: – Working area: 1200 x 900 mm – Laser power: 100–130 W – Working table lowering depth: 40 mm – Positioning accuracy: 0.03 mm – Machine dimensions: 1410 x 1790 x 670 mm (+315 mm with casters) – Packaging dimensions: 1880 x 1490 x 810 mm – Weight: 368 kg Virmer not only offers first-class machinery, but also service and delivery. Our engineers and managers are ready to answer all your questions and provide video support if needed. In addition, owners of Wattsan machines receive lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. We provide not only laser engravers, but also metal cutters, welding machines, marking systems, and cleaning equipment. Podpjh Ucrbefx Amfera Wattsan is a Chinese manufacturer that has been producing laser equipment for almost 15 years, continuously improving with the help of customer feedback. Thanks to this input, Wattsan has implemented over 50 upgrades, making its machines more reliable, precise, and powerful — so you can take your business to the next level. YOU CAN WRITE TO US OR CALL! WE’LL CHOOSE THE RIGHT MACHINE FOR YOUR TASK. If you’re looking for the right laser or CNC milling machine, we’re happy to help. You’ll find a wide selection of laser machines and equipment with us: CO2 laser machines; metal laser cutting machines; laser metal cutters; fiber metal lasers; fiber metal laser engravers; CNC milling machines for metal; woodworking milling machines; CNC milling machines; laser engraving machines; laser engravers; plywood laser cutting machines; metal laser cutting machines; CNC milling machines; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressors; rotary devices; mirrors for laser machines.

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Prjdpfevwbp Aox Amfsa

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Psdpfx Ameiidm Njfsra Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: rabljeno, Leto izdelave: 2016, Mitre plate saw with automatic pre-tensioning and double pusher system for optimized cutting OSI Plus numerical control OS Labeling – onboard labeling unit with graphical marking of parts including part drawings Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Powered feed rollers for side loading via lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of disposable (sacrificial) boards based on specified thickness data in the machine parameters Low stack stop Automatic side loading. Includes: containment fences, twin photocells, pushbutton panel, electrical preparation for the two powered infeed roller conveyors, plus reinforcement with 4 rollers instead of fork passages on the infeed conveyor Intermediate roller conveyor Side loading roller conveyor measuring 3800 x 2200 mm with powered rollers (floor-to-conveyor height 325 mm) Gravity conveyor for longitudinal offcuts to corner station 4500 mm (total length: 7295 mm) 3000 mm conveyor extension for crosscut offcuts Long chute for manual crosscut transportation to the central gravity conveyor Air-cushion outfeed table 2050 x 850 mm, front side equipped with wheels Air generator for up to 6 air-cushion table decks MULTIPUSHER 2.4 System with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows reduction of the minimum panel length to be crosscut from 1830 mm to 1220 mm Automatic device for detecting blade shaft flexure in angular cuts (longitudinal and cross axes), consisting of a sensor for direct deflection measurement on the blade shaft and a device for recording saw blade revolutions directly at the chuck Remote-cycle start keypad Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main sawblade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Podpfjuc Idxjx Amfora Saw carriage speed: 1–140 m/min (servo motors) Longitudinal pusher carriage speed: 90 m/min Cross pusher carriage speed: 135 m/min Double shuttle carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed + 2 on the Multi-Pusher cross carriage) Cutting system for thin panels

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 9 kW (12,24 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 2.200 mm, pomik osi Y: 2.900 mm, pomik po osi Z: 350 mm, dolžina obdelovanca (maks.): 2.800 mm, širina obdelovanca (maks.): 2.100 mm, višina obdelovanca (maks.): 300 mm, število osi: 3, število mest v zalogovniku orodij: 12, vrsta aktuacije: električni, skupna višina: 2.275 mm, skupna dolžina: 4.060 mm, skupna širina: 3.315 mm, skupna masa: 1.700 kg, Oprema: dokumentacija / priročnik, 2128 PANA ATC is a next-generation CNC router from DANIBRUM, developed for modern workshops and production facilities seeking high productivity, consistent precision, and efficient automation in a single, fully-integrated machine. Equipped with a 12-position automatic tool changer (ATC) and ISO30 tool holder system, the machine enables rapid tool changes and extended flexibility for processing a wide range of materials: chipboard, MDF, solid wood, plastics, alucobond, and composites. Its robust structure is supported by 25 mm linear guides, M1.25 helical rack and pinion drives, and 750 W servomotors, ensuring fast, smooth movements and precise positioning on all axes. The 9 kW air-cooled electrospindle, with speeds up to 18,000 rpm, is controlled by an 11 kW inverter, offering fine speed adjustment and stable performance under load. Podpfxoymcncj Amfera The result is a reliable, fast, and versatile CNC router tailored to the current requirements of furniture manufacturing and industrial processing.

Stanje: rabljeno, številka stroja/vozila: LC594, Technical Data & Performance Specifications This complete PET bottling line is designed for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines highly efficient blow molding, isobaric filling, labeling, packaging, and end-of-line automation into a coherent used bottling line suitable for industrial packaging operations in the second-hand market. Production speed: 13,000–14,000 bottles per hour Containers: PET bottles, neck finish 28 1881 Blow Molding Machine: Sidel SBO10, 10 cavities Preform Handling: Sidel EBH 2050 preform hopper Air Conveyor: Sidel-Alsim Rinser/Filler/Capper Monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10K Rinser: 48 grippers, 1 water treatment Filler: 60 isobaric valves Capper: 10 heads Premix/Mixer: Sidel-Alsim, output capacity 30 m³/h Bottle Dryer: ACI Labeling Machine: Krones Contiroll, rotary, 15 plates, PET wrap-around, roll-fed Podpjydn A Hjfx Amfsra Shrink Packer: Acmi Fenix, film-only configuration Handle Applicator: Smipack HA 35-50-70 Palletizer: Alsim Valiant 1I 1P, fully automatic, push-type Pallet Wrapper: PM Pragometal OBS Rotomatic Standard Advanced Automation & Control Systems The line integrates component HMIs and automatic control functions at each station to simplify operation and format changeovers. The isobaric filler block ensures precise filling of carbonated beverages, while the rotary roll-fed labeling system supports continuous, high-speed label application. Quick-change mechanical settings and format components help maintain uptime and reduce changeover times in beverage production environments. Line Integration Designed for inline operation from preform loading through to palletizing, the system features smooth bottle transfer via air conveyors and synchronized star wheels inside the filling monoblock. It integrates upstream blow molding with downstream labeling, shrink wrapping, handle application, and palletizing—delivering a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks, supporting multiple PET bottle formats and heights in combination with the 28 1881 neck finish. Machine Condition & Maintenance History This used line is available for sale and presented in operational condition. The components’ manufacturing years range from 1996 to 2019, reflecting a carefully curated selection of filling equipment. Buyers can arrange inspections to assess performance, equipment condition, and overall line integration before deployment in beverage production. Operational Performance & Versatility Optimized for carbonated products, the isobaric filler delivers precise CO₂ retention and foam control. The Sidel blow m...

Stanje: rabljeno, Leto izdelave: 1995, Cutting width: 375 mm Cutting height: 150 mm Saw blade dimensions: 500 x 30 mm Motor power: 2 x 3 kW Cutting length: 5100 mm Rotational speed: 2800 rpm Air pressure: 6 bar Prjdjtv Rgrepfx Amfoa Machine weight: approx. 700 kg Space requirement: approx. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Robust cast construction of the saw unit * Large cutting area, allowing simultaneous cutting of 2 profiles * Easy adjustment of the movable unit via roller guide * Double bearing of the swivel mechanism * Safe clamping via dual-pressure system * Double guide for saw feed * Hydropneumatic saw feed * Correction scale for external dimensions * Left saw unit fixed * Swivel range 45°-90° * Including extraction unit (without piping), ALKO Mobil-Jet 100, year of manufacture 2002

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Maksimalni vrtljivi obseg (navpična os električnega vretena): 1650 – 2350 – 3000 mm Vektorska hitrost (X-Y) (PRO-SPEED): 85 m/min Programabilna hitrost v osi Z: 30 m/min Prehod elementa: 170 mm Multifunkcijska enota BRC-K: Tehnične značilnosti (Gr-Multif_BRC-K_2.1_N5.1-0.6) Pedeyffh Nopfx Amfora 1) Moč: Motor 3,6 kW (S6 - 40 %) Število polov: 2 Regulacija obratov: preko CNC s frekvenčnim pretvornikom Hladilni sistem z ventilatorjem 3) Horizontalno rezkalno vreteno: Vpenjanje orodja: ER25 Hitrost vretena: 6000–18000 vrt/min Smer vrtenja: Desno/levo Največje dimenzije orodja: L1 = 151 mm / B1 = 120 mm / T = 20 mm Največje dimenzije orodja 2: L2 = 111 mm / B2 = 80 mm / T = 20 mm Maksimalna globina obdelave: 115–75 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 140 h, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 3.050 mm, dolžina pomika po osi Y: 1.250 mm, dolžina podajanja os Z: 80 mm, vhodna frekvenca: 50 Hz, vhodni tok: 29 A, delovna širina: 3.050 mm, Wir bieten diese sehr gute HOMAG DRILLTEQ V-500 Durchlaufbohrmaschine, Baujahr 2021, an. Arbeitsbereich X: 3.050 mm Arbeitsbereich Y: 1.250 mm Arbeitsbereich Z: 80 mm Podpsylp Slsfx Amfsra Anzahl Frässpindeln: 1 Hauptmotorleistung: 10 kW Maximale Drehzahl: 24.000 U/min Werkzeugspannsystem: HSK-F63 Werkzeugwechsler-Positionen: 4 Vertikale Bohrspindeln: 15 Horizontale Bohrspindeln in X: 6 Horizontale Bohrspindeln in Y: 4 Nutschneidaggregat: um 90° schwenkbar Vertikale Arbeitsfläche: Maschinentisch Durchlauftechnik: Spezielle Werkstück-Spanntechnik Klemmgreifer Barcodeleser Sicherheitseinrichtung: Geschlossene Schutzeinhausung Steuerung: Homag powerTouch, HOMAG POWER CONTROL Software: HOMAG WOODWOP 7.2 Konformitätskennzeichnung: CE-Kennzeichnung Kategorie: Bearbeitungszentrum Typenbezeichnung: DRILLTEQ V-500 Untertyp: OPTIMAT BHX200 Maschinennummer: 0-250-73-7195 Schaltplan: 0-250-73-7195 Versorgungsspannung: 400Y/230 V Neutralleiter: vorhanden Phasen: 3 Frequenz: 50 Hz Maximaler Betriebs-Nennstrom: 29 A Absicherung: 35 A Steuerspannung: 24 V Bei Fragen oder für weitere Informationen senden Sie uns gerne eine Nachricht oder rufen Sie uns an.