Arburg Arburg Allrounder 520 S 1600-290 / 290 nakup rabljenega (84.925)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, vpenjalna sila: 1.600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced controls for both injection units and supports multi-component processing. If you are looking for a high-quality injection moulding machine, you should consider the hydraulic injection moulding machine Arburg Allrounder 520 S 1600-290 / 290, which we are offering for sale. Please contact us for further details. • Injection Units and Plasticising • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Programmable and controlled nozzle contact force • aXw control ScrewPilot • 2nd injection unit: Ppsdpfoyxdwdjx Aa Dot • 2nd injection aggregate 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Programmable and controlled nozzle contact force • aXw control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multicomponent processing; separation plane device on short skids for the 2nd • Injection with tool closed ("flying injection") • Drive, Hydraulics, and Cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l capacity (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; enhanced cooling performance • Controlled machine cooling circuits • Clamping System, Ejector, and Core Pulls • Clamping platen set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1, simultaneous movement (P/Q controlled, programmable) • Core pull 2, simultaneous movement (P/Q controlled, programmable) • Core pull 3, simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 including pressure reducer • Electrical core pull control 1 (requires VE 436/00) • Pneumatic/Hydraulic tool connections • Electrical connection pneumatic NVD 1 (in the tool) • Electrical connection pneumatic NVD 2 (in the tool) • Electrical and hydraulic connection NVD 3 (in the tool) • Electrical and hydraulic connection NVD 4 (in the tool) • Blow-off device 1 with pressure reducer; connection for blow-off device 2 • Cooling water and tool circuit • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to the fixed platen; 3 cooling water circuits to the moving platen • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and Electrics • Selogica direct control; technology level • Circuit protection for heating circuits (1-6 with 16 A) • 15 electric heating circuits for tool heating • Boost function for heating circuits (hot runner) • Upper protective guard open, raised to safety distance • Fault display with flashing indicator • Operator authorization via chip card (EUROMAP 65) • Interfaces and Connectivity • Interface for conveyor belt (machine base) • Prepared for 6-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA

Stanje: rabljeno, Leto izdelave: 2010, (1) Stroj za brizganje plastike, Manipulacija: Wittmann | W832-0185 | 2010 Upravljanje temperature: HB Therm | Razno: 1x Zaščitna ograja 1x Sistem za manipulacijo 1x Transportni trak 1x Sušilec lijaka, podjetje TORO-systems 1x Zunanji hot runner modul, podjetje Mold Masters 1x Transportna enota, podjetje Motan Pedpfxjy N R Tyo Aa Djpt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 78.099 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 25 mm, skupna višina: 2.800 mm, skupna masa: 10.700 kg, Oprema: dokumentacija / priročnik, Arburg 520S 1600 290/70 2 komponenty 12,3 mil. cyklov 86 565 hodín ručný režim 78 099 hodín automatický režim Vstrekovacia jednotka 1 horizontálna 290, priemer 25 mm, max. 71 cm³ Vstrekovacia jednotka 2 vertikálna 70, priemer 18 mm, max. 21 cm³ Otvárací zdvih: 925 mm Elektrický indexový otočný pohyb 12-zónový horúci kanál integrovaný 3x ťažné jadrá 2x vyfukovanie (ovládanie ihlového uzáveru) Rôzne zákaznícke vstupy a výstupy Pedsxzix Aepfx Aa Djpt Rozhrania: ALS Temperovacie zariadenia Sušička Multilift H 6kg: 2x vákuum 5x dvojčinný uchopovač Z-os servo, 800 mm C, G, X a B os pneumatická Rôzne zákaznícke vstupy a výstupy (monitoring uchopovačov atď.) Dôležité upozornenie! Daňová informácia a výhoda pre použité stroje Od 1.7.2025 je možné uplatniť aj použité stroje na mimoriadny odpis vo výške 30 % ročne. Okrem priaznivejšej ceny v porovnaní s novým zariadením môžete uplatniť rovnaké odpisy ako pri novom stroji. Kľúčové slovo: booster rastu (§ 7 odst. 2 EStG-E)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 78.100 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 25 mm, Arburg 520S 1600 290/70 2-Component Injection Moulding Machine 78,099 operating hours, automatic Ppsdpfx Aasx A Dy Ro Dst Injection unit 1 horizontal, 290, diameter 25 mm, max. 71 cm³ Injection unit 2 vertical, 70, diameter 18 mm, max. 21 cm³ Opening stroke: 925 mm Electric indexing rotation 12-zone hot runner system integrated 3x core pull 2x air blow (control for needle valve) Various customer-specific inputs and outputs Interfaces: - ALS - Temperature control units - Dryers Multilift H 6 kg: 2x vacuum 5x double-acting gripper Z-axis servo, 800 mm C, G, X, and B axes pneumatic Various customer-specific inputs and outputs (gripper monitoring, etc.) At Maschinen-Handel, we provide a start-up guarantee with every machine purchased from us, and the machine is commissioned by the manufacturer. This offers you, as a customer, maximum security on the used machinery market. Important Notice!!! Current information – Tax notice and benefit for used machinery As of 01/07/2025, used machines can also be considered for tax purposes with a special depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for new machines. Keyword: Growth Booster (§7, Paragraph 2, German Income Tax Act – draft).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09.2011 Injection unit: Screw diameter: 35 mm Ppsdjy Smdgepfx Aa Dst Shot weight: 132 g Injection pressure: 2000 bar Dosage volume: 144 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic core pull, controlled by proportional valve x 2 Reinforced injection units – bimetallic Proportional valves on injection units - precision moulding Machine with two cylinders/batteries with compressed nitrogen (additional charge for rapid operation) Parallel movements Screw diameter in vertical injection unit: ⌀25 mm - 45 g/PS Original rotary table Purchase of rotary table at extra cost Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes driven by servo motors (electric); C-axis and A motion Travel on axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel Robot safety package Robot with adapter, protective housing Purchase of robot at an additional cost Dimensions: Weight: 6720 kg Length/Width/Height: 4.41x1.84x3.20 m All machines offered are started and checked by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, število vbrizgov: 2, Here we, as a dealer of injection moulding machines, offer the following well-maintained, pre-owned injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines with a manufacturing year from 2010 onwards. We have been a wholesale distributor of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-Component Machine Year of manufacture: 2009, from first German ownership • Total cycles: 12.3 million • Manual operation: 86,565 hours • Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal – 290 • Screw diameter: 25 mm • Shot volume: 71 cm³ Injection unit 2 – vertical – 70 • Screw diameter: 18 mm • Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm • Max. platen distance: 925 mm Opening stroke: 675 mm Mould installation height: 250 mm • Electric index rotation included Extras Hot runner / additional axes • 12-zone hot runner integrated • 3x core pulls • 2x blow-off functions  → incl. control for needle shut-off • Various customer-specific inputs and outputs Interfaces / communication • ALS • Connection for temperature control units • Connection for dryers Handling / Multilift H (6 kg) • 2x vacuum circuits • 5x double-acting gripper functions • Z-axis servo-driven, 800 mm stroke • C, G, X, and B axes pneumatic • Various customer-specific inputs and outputs  → incl. gripper monitoring Complete maintenance documentation for the last 3 years: - Both injection units have been newly sealed by Arburg - Clamping unit completely resealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty up to initial commissioning Loading/Shipping Free loading onto buyer’s truck or free delivery within Germany subject to freight reimbursement Worldwide delivery Available from our warehouse in Hannover, Germany Important information about the machines we offer and our company: - We only sell machines purchased from ongoing production, available from our Hannover warehouse - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property - All offered machines originate from successful companies where maintenance and care are a matter of course - All machines offered can be inspected at our warehouse Ppjdpfx Asyzumzja Dot

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, vpenjalna sila: 1.600 kN, skupna masa: 5.900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force of up to 1600 kN. The machine comes equipped with a take-out robot and an enclosure with a FilterFanUnit that ensures clean operation. It is ideal for precision plastic processing and offers a mold height of 250 mm and a platen spacing of 825 mm. Contact us for further information about this machine. Additional Equipment • Cooling water connection: Max. temperature: 30°C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Highlights: • Thermoplastic cylinder: 45 mm, highly wear-resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle, 45 mm • Larger hold pressure pump • Selogica direct control system • Technology level 2, servo-driven with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Programmable, controlled nozzle contact pressure (1st injection unit) • Central 125 mm clamping platen set • Machine raised by 100 mm (elevated oscillation elements) Psdpfxox D E Dys Aa Dspt • 8 programmable digital inputs and outputs • 6 electrical heating control circuits for the mold • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multispline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby function • Sound pressure level: 70 dB(A) | ±3 Additional Information Screw diameter: 400 units: 35 / 40 / 45 mm Injection pressure (max.): 400: 2500 / 2000 / 1580 bar Shot weight (max. g PS): 400: 141 / 184 / 232 g Heating capacity 400: 9.7 kW | 5 zones Net machine weight: 400: 5900 kg

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Na voljo je skoraj nova brizgalna naprava Arburg. Zapiralna sila: 1600kN, razdalja med stebri: 520mm, zapiralni hod: 364mm, izmetalni hod: 150mm, izmetalna sila: 40kN, brizgalna enota: 400, brizgalni tlak: 2500bar. Dimenzije stroja D/Š/V: ca. 6000mm/1800mm/2200mm, teža: ca. 6000kg, krmiljenje: Selogica, delovne ure: ca. 67h. Vključno z zaščitnim ohišjem s čistim zrakom FilterFanUnit in odjemnim robotom. Dokumentacija na voljo. Ogled na lokaciji je možen. Podpfxew Rqwtj Aa Dept

Stanje: dober (rabljeno), Leto izdelave: 2005, Ref.-No.: 18591 Manufacturer: ARBURG Model: 520 A 1600-400 Electric machines Ppjdpfx Aaexf T I Ns Det Year of manufacture: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Tie bar spacing (h x v): 520 x 520 mm Min. mould installation height: 250 mm Max. mould installation height: 550 mm Daylight opening: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Shot volume: 254 cm³ Shot weight PS: 232 g Injection pressure: 1580 bar Dimensions and weights Machine weight: 7,100 kg Dimensions LxWxH part 1: 5.1 x 1.7 x 2.3 m Additional information: The ARBURG 520 A series belongs to the fully electric ALLROUNDER range from ARBURG and stands for high precision, energy efficiency, and reliability in the injection moulding process. These machines are especially suitable for the production of technical plastic parts with demanding quality requirements, as well as for applications where repeatability and process stability are crucial. Typical features of this series: * Fully electric drive for all main movements * Significant energy savings compared to hydraulic machines * Highly precise injection and positioning accuracy * Quiet and clean operation (also ideal for medical applications) * Low maintenance requirements The 520 A range with 160 tonnes clamping force offers an excellent combination of performance and flexibility and is frequently used in fields such as automotive supply, medical technology, and technical plastic components. ARBURG is renowned for its durable and robust machines, making this series highly sought after on the used machinery market.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 520S 1600-400/170 e² / Production Line with Geiger Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Metering volume: 154 cm³ Clamping Unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Hot-runner control x 12 Reinforced injection units – bimetallic Ppedpfxey Smdyj Aa Dot Machine with two cylinders / batteries with compressed nitrogen (additional charging for high-speed operation) The machine features a servo motor integrated in the injection unit for dosing the plastic material Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm – 77 g/PS Integrated Arburg brand conveyor belt and sorting chute Original Weber brand rotary table, highly precise – electrically driven (inverter integrated in the machine) Rotary table and robot available at additional cost Dimensions: Weight: 8140 kg Length/width/height: 4.81 x 1.84 x 3.45 m All offered machines are commissioned by our service technicians before sale. Video of technical tests for the selected machine is available upon request, or you may participate in live technical demonstrations at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 80.313 h, vpenjalna sila: 1.600 kN, premer vijaka: 40 mm, razmak između stupova: 520 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2.000 letvica, injekcijska masa: 184 g, minimalna višina orodja: 250 mm, Arburg 520S-1600-400/170 dvokomponentni brizgalni stroj s sortirno loputo in plinsko okrepitevjo (245) Številka: 245 Razpoložljivost: na zalogi Leto proizvodnje: 2008 Proizvajalec: Arburg Stanje brizgalnega stroja: rabljen Premer polža [mm]: 40/30 Vbrizgana masa [g]: 184/77 Tlak vbrizgavanja [bar]: 2000/2000 Zapiralna sila [kN]: 1600 Razmik med stebri [mm]: 520 x 520 Velikost plošče [mm]: 688 x 688 Vrsta krmiljenja: Selogica Jezik: Angleščina, nemščina Vgrajena moč [kW]: 106 Delovne ure [h]: 80.313 Priključek za robota: 67 Euro Zračni ventil: 4x Veriga za jedro: 1x Krmiljenje gretja oblik: 3x Ppodpfxey Szrfj Aa Dot Dovajalni lijak: NE

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar distance horizontal [mm]: 630 Clear tie bar distance vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Max. opening stroke [mm]: 600 Max. ejector stroke [mm]: 225 Mounting thread [M]: 24 Multi-turntable type: turntable Turntable diameter [mm]: 900 Turntable mounting thread [M]: 20 Max. mould weight [kg]: 2,500 Max. mould weight, moving side [kg]: 2,500 Podpfoyf Ha Hox Aa Dspt Screw diameter [mm]: EE1: 30, EE2: 25, EE3: 25 Max. shot weight [g] PS: EE1: 83, EE2: 59, EE3: 58 Injection unit configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robotic interface Inspection possible by appointment at any time. Free loaded onto truck (Butzbach). #Tags: ARBURG | Multi 3K | 630S

Stanje: rabljeno, Leto izdelave: 2000, (1) Brizgalni stroj, rokovanje: Arburg | Multilift H z osjo B | 2000 Ppedpjy N Sausfx Aa Djt Kontrola temperature: HB Therm | HB-160 Z1 | 2012 Razno: 1x sistem za rokovanje 1x transportni trak (integriran v brizgalni stroj) 1x transportna enota, podjetje Motan 1x pakirna celica z: Robotom, podjetje Yaskawa GP-7 Kamera sistemom, podjetje Omron Transportnim trakom, podjetje Robotunits Tehnične podrobnosti: Obratovalna napetost: 400 V Frekvenca (Hz): 50 Krmilna napetost 1: 230 V Krmilna napetost 2: 24 V Nazivni tok motorja/gretja (A): 200,0 / 93,0 Skupna priključna moč (kW): 42,0

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, vpenjalna sila: 400 kN, premer vijaka: 30 mm, injekcijska masa: 79 g, Hydraulic injection molding machine from 2018. The Arburg ALLROUNDER 270 S 400-100 offers a maximum clamping force of 400 kN and screw diameters of 15 mm, 20 mm, or 30 mm. The maximum injection pressure is 2,500 bar for the smaller screws, and the maximum shot weight is 79 g when equipped with the largest screw. If you are looking for high-quality injection molding machines, you should consider the Arburg ALLROUNDER 270 S 400-100, which we have for sale. Contact us for further details. • Tie bar spacing: 270 mm • Injection unit: size 100 (per EUROMAP) • Operating hours: 4,261 h (automatic) • Screw diameter options: 15 / 20 / 30 mm • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm • Vacuum pump capacity: approx. 25 m³/h • Pneumatic delivery volume: 1,000 l/min per circuit • Heating capacity per control loop: 3.6 kW / 230 V (protected by 16 A) • Drive motor voltage: 380-480 V (50-60 Hz) Pedey Nkwlspfx Aa Dept

Stanje: rabljeno, Leto izdelave: 2000, Arburg brizgalni stroj v dobrem stanju. Možen ogled v delovanju po dogovoru. Razpoložljivost: 06/2026 Zapiralna sila: 2500 kN Razdalja med veznimi palicami: 630 x 630 mm Teža brizga: 826 g Tlak vbrizga: 1470 bar Pjdpfx Aaoy Sxlcs Dopt Premer polža: 70 mm

Stanje: rabljeno, Leto izdelave: 2008, Screw diameter: 18 mm Clamping force: 250 kN Max. opening stroke: 350 mm Mould installation height: 200 mm Control system: Selogica Operating hours: 52,492 h ARBURG ALLROUNDER 270 S 250-70 – Injection Moulding Machine – Year of manufacture: 2008 – Excellent condition For sale is a reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection moulding machine from 2008. The machine is ideal for precision plastic parts in small to medium batch sizes and stands out with its robust construction and renowned ARBURG quality “Made in Germany”. Technical highlights: - Clamping force: 250 kN - Injection unit: size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Tie bar spacing: approx. 270 x 270 mm - Mounting plates: approx. 380 x 380 mm - Connected load: 53 kW Electrical equipment: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current draw: 89 A Further information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Ppodpfx Aasywzv Ie Djt Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term spare parts availability ensured Inspection possible by arrangement. Further information, photos, or videos available upon request. - Operating hours: 52,492 h, 7,085,048 cycles - Centering ring adapters ø125mm - Blow moulding unit included

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 68.946 h, Funkcionalnost: popolnoma funkcionalen, V obratovanju Delovne ure: 68 946 h Sila zapiranja: 1 500 kN Enota za zapiranje: 520 H Sila/ hod odpiranja: 450 mm Fiksna/variabilna višina vgradnje kalupa: 250-550 mm Fiksna/variabilna razdalja med ploščami: 700-1000 mm Razmak stebrov: 520 x 520 mm Pritrdilne plošče za kalup (širina x višina): 695 x 695 mm Največja teža pomične polovice orodja: 1 000 kg Sila – hod izmetalca: 40 kN – 175 mm Čas praznega cikla: Conformt min. 1,5 s – 364 Premer polža: 40 mm Efektivna dolžina polža: 20 L/D Hod polža: 160 mm Izračunani volumen vbrizga: 201 cm³ Teža na vbrizg: 184 g PS Pjdpfx Asyab R Nsa Djpt Pretok materiala: 29 kg/h PS Tlak vbrizgavanja: 2 000 bar Čas dotlaka: 45-2000 s-bar Pretok vbrizgavanja: 214 cm³/s Hitrost vbrizga: 170 mm/s Moč – ogrevalne cone: 9,7 kW – 5 Kapaciteta olja: 160 l Teža: 6 700 kg Višina: 2 215 mm Dolžina: 4 672 mm Na voljo tudi kompletna postavitev: brizgalni stroj + WITTMANN W818-2066 (2013) robot + transportni trak Robot WITTMANN W818-2558 (2013)

Stanje: dober (rabljeno), Leto izdelave: 2012, obratovalne ure: 43.331 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.500 kN, premer vijaka: 45 mm, razmak između stupova: 630 mm, delovna prostornina: 318 cm³, tlak vbrizgavanja: 2.470 letvica, Lager-Nr.: 503604 Hersteller: ARBURG Typ: Allrounder 630 S 2500-800 Steuerung: Selogica Baujahr: 2012 Betriebsstunden: 43331 h Schließkraft: 2500 kN Holmaß h x v: 630 x 630 mm Plattengröße h x v: 900 x 900 mm Einbauhöhe min.: 300 mm Einbauhöhe max.: 700 mm Plattenabstand max.: 1300 mm Öffnungsweg: 600 mm Schneckendurchmesser: 45 mm Hubvolumen: 318 ccm Spritzdruck: 2470 bar Ausrüstung Bildschirmtext deutsch Kernzug hydraulisch 2x Maschine inklusive Förderband Maschine inklusive Handling Maschine inklusive Schutzeinhausung Nivellierelemente Technische Daten Handling Maschinenart : Linearroboter Fabrikat: Arburg Steuerung: Multilift Baujahr: 2012 X-Achse: 400 mm Z-Achse: 1400 mm Rotation Achse C: 90 ° Gesamtgewicht: 450 kg Ppsdoyvzyqjpfx Aa Dst Maschinenabmessungen SGM LxBxH: 6.12m x 2.25m x 2.21m Gesamtgewicht: 12200 KG

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 38.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, razmak između stupova: 630 mm, delovna prostornina: 392 cm³, tlak vbrizgavanja: 2 letvica, izmetalna sila: 225 N, hod izmetalca: 90 mm, dolžina plošče: 900 mm, širina plošče: 900 mm, skupna dolžina: 6.400 mm, skupna širina: 1.950 mm, skupna višina: 2.210 mm, skupna masa: 12.140 kg, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, prosta razpetina: 900 mm, Oprema: dokumentacija / priročnik, Inventarna št.: 503409 Proizvajalec: ARBURG Pedpjyvzykofx Aa Djpt Model: Allrounder 630 S 2500-800 Selogica Leto izdelave: 2012 Obratovalne ure: 38.000 h Zapiralna sila: 2.500 kN Razmik med vodili (vod.), širina x višina: 630 x 630 mm Velikost plošče, širina x višina: 900 x 900 mm Minimalna vgradna višina: 300 mm Maksimalna vgradna višina: 700 mm Maksimalen razmik med ploščama: 900 mm Odpiralna pot: 600 mm Premer polža: 50 mm Prostornina hoda: 392 ccm Tlak brizganja: 2.000 bar Oprema Zaslon z nemškim besedilom CEE vtičnica 16A Compact Flash vmesnik za shranjevanje podatkov Hidravlični izvlek jedra 1x Zračna ventilacija 2x Stroj z vodno baterijo Stroj brez dozatorja materiala Stroj brez sesalnega transporta Nastavljivi nivelirni elementi Vmesnik EUROMAP 67 Vmesnik OPC Schuko vtičnica 10A Selektivna enota Dimenzije stroja (d x š x v): 6,4 m x 1,95 m x 2,21 m Skupna masa: 12.140 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, vpenjalna sila: 2.200 kN, premer vijaka: 70 mm, injekcijska masa: 172 g, Ta Arburg 570 S 2200-800/290 je bila izdelana leta 2020. Opremljena je s hidravličnim pogonskim sistemom in Selogica krmiljenjem za natančno delovanje. S zapiralno silo 2.200 kN in premerom polža 40 mm je idealna za natančne brizgalne naloge. Izkoristite priložnost in kupite to hidravlično brizgalno maso Arburg 570 S 2200-800/290. Kontaktirajte nas za dodatne informacije. Zapiralna enota • Razdalja med vodili: 570 × 570 mm Psdpfxjx Nkp Ij Aa Dopt • Hod odpiranja: 650 mm • Izmetalna sila: 70 kN • Izmetalni hod: 200 mm Brizgalna enota • Velikost brizgalne enote: 290 • Tlak brizganja: 2.500 bar • Volumen brizga: 188 cm³ Pogon in krmiljenje • Pogon: Hidravlični • Krmiljenje: ARBURG Selogica

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, vpenjalna sila: 1.000 kN, premer vijaka: 35 mm, injekcijska masa: 132 g, skupna masa: 3.650 kg, Ta Arburg Allrounder 420C 1000-290 je bila izdelana leta 2014. Ima zapiralno silo 1000 kN, hod odpiranja 500 mm in vpenjalno površino 570x570 mm. Največja brizgalna masa je 132 g. Razmislite o možnosti nakupa tega hidravličnega stroja za brizganje Arburg Allrounder 420C 1000-290. Za več informacij nas kontaktirajte. • Hod odpiranja: 500 mm • Velikost vpenjalne plošče: 570 x 570 mm • Maks. volumen: 144 cm³ Pedpfx Aajyglrwo Dspt

Stanje: zelo dobro (rabljeno), Proizvajalec: ARBURG Model: Allrounder 270-S-500-60 Leto izdelave: 1998 Psdpjx Eiq Hsfx Aa Djpt Serijska številka: 173062 Krmilni sistem: Arburg Selogica Premer polža: 18 mm

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 95.239 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 173937, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, razmak između stupova: 520 mm, minimalna višina orodja: 250 mm, skupna dolžina: 5.100 mm, skupna širina: 1.800 mm, skupna višina: 2.200 mm, skupna masa: 6.630 kg, Oprema: dokumentacija / priročnik, The machine operated flawlessly until the last day before the arrival of the new machine. It is therefore in good used condition. The machine is being sold due to lack of space in the injection area and is no longer connected to power. Pump, injection unit, and clamping unit are leak-free. The machine manual is available. Videos of the machine are available. Operating hours (pump): 95,239 Operating hours (automatic): 86,082 Repairs in recent years: - Filter changed annually - 05/2024: Fan in control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/back - 02/2023: New keypad installed (motor and heating panel) - 12/2022: Ejector and injection unit sealed, including new piston Pjdev D Nxlopfx Aa Dopt

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Na voljo je popolnoma opremljen brizgalni stroj Arburg, vključno z enoto za filtracijo dovoda čistega zraka (Filter Fan Unit) in odvzemnim robotom. Zapiralna sila: 1600 kN, premer polža: 45 mm, maks. segrevanje valja: 450°C, skupna priključna moč: 85,5 kW, dvig stroja: 100 mm, delovni čas: cca 9171 h. Arburg Multilift H: os: B, hod po osi Z: 1400 mm, dolžina transportnega traku: 2500 mm, širina traku: 600 mm, območje višine odlaganja: 900 mm-1300 mm, temperaturna odpornost: 160°C. Dokumentacija je na voljo. Ogled na lokaciji je možen. Ppsdpeyab I Uefx Aa Djt

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Na voljo je popolnoma opremljen stroj za brizganje Arburg, vključno z enoto za filtracijo in dovod čistega zraka ter robotom za odvzemanje izdelkov. Zapiralna sila: 1600 kN, premer polža: 45 mm, največja temperatura valja: 450°C, skupna priključna moč: 85,5 kW, povišanje stroja: 100 mm, delovni čas: cca 13.361 h. Arburg Multilift H: os: B, pomik osi Z: 1400 mm, dolžina transportnega traku: 2500 mm, širina traku: 600 mm, višina odlaganja: 900-1300 mm, temperaturna odpornost: 160°C. Dokumentacija je na voljo. Ogled na lokaciji je možen. Podpoyab Nfsfx Aa Dspt