Stroji za brizganje plastike

Arburg 520 S 1500-400

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 9.171 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, proizvajalec krmilnikov: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1,600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances operator comfort. Take advantage of this opportunity and purchase this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Advanced two-stage clamping program • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • Highly wear-resistant design • Sintered metal check ring • CrN coating on screw and backflow ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology level 2 – servo-controlled dual-circuit pump system: • Two regulated hydraulic pumps enable precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control: • Touchscreen operation with process editor • 15-inch display (38.1 cm) • Multilingual user interface (German, English, local language) • Heating power zones 1–6: each 3.6 kW (230 V / 16 A) Lsdpfx Alsyg I Ihs Nsaa • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Operating hours: 9,171 Additional equipment • Not included in the listing • Note: The machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Stanje: rabljeno, Leto izdelave: 2009, številka stroja/vozila: PR21, Technical Specifications & Performance Data This Husky injection molding machine is engineered for high-volume production of PET preforms, making it ideal for integration into a used bottling line or as a second-hand addition for industrial packaging operations. The 120-ton clamping platform is combined with a 32-cavity hot runner system, ensuring uniform output of PET preforms for multiple bottle formats. Manufactured by Husky in 2009, the unit is designed for rapid mold changes and stable cycle times, supporting beverage production with precise neck finishes and preform weights. Manufacturer: Husky Model: HyPET120 P85/95 E85 Year of manufacture: 2009 Clamping force: 120 tons Cavities: 32 Hot runner system: Husky 32-cavity hot runner, uniform across supplied molds Neck finishes: 29/25 mm primary; additional parts for 30/25 mm Preform weights (29/25 mm sets): 9.02 g, 12.46 g, 18.70 g Additional 30/25 mm parts: 10.5 g, 14.0 g, 22.0 g, 25.0 g (one complete assembled set at 22.0 g) Typical cycle times: 7 s, 8 s, 9 s Electrical supply: 400 V, 50 Hz, 3~ + N + PE Main supply current: 191 A (auxiliary supply: 40 A) Short-circuit resistance (control cabinet): 10 kA Included peripherals: Plastic Systems granulate dryer with material hopper, mold dehumidifier, and available spare parts Supported bottle formats via preforms: 0.2 l, 0.5 l, 1.0 l Container material: PET Advanced Automation & Control Systems The machine is equipped with Husky technology for precise temperature control, shot consistency, and efficient thermal management in the 32-cavity hot runner. The injection system supports quick setups using plug-and-play cold half-molds, simplifying format and weight changes. Operator interaction is optimized via an integrated control interface for recipe management, alarm diagnostics, and process monitoring. The control cabinet is designed for industrial use, with 10 kA short-circuit resistance and clear separation of main and auxiliary power supplies. Laodpfx Aleyhbd So Nea Integrated HMI for process control and monitoring Hot runner temperature control across all 32 cavities Quick-change cold half-molds, mold plate, and cooling interface Electrical: 400 V, 50 Hz, three-phase with neutral and protective earth Integration Options for Production Lines Optimized for PET preform manufacturing, this system integrates seamlessly with upstream material handling and downstream conveying to stretch blow molding machines, quality control, and packaging stations in beverage production. The included Plastic Systems granulate dryer and mold dehumidifier stabilize material and tooling conditions, improving repeatability and throughput in complete bottling and packaging plants. Inline or standalone operation for preform supply Compatible with ind...

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 13.361 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, proizvajalec krmilnikov: ARBURG, This Arburg 520S-1500-400 injection moulding machine was manufactured in 2016. It features a clamping force of 1600 kN, a 45 mm screw diameter, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances user-friendliness. Take advantage of this opportunity and purchase the hydraulic Arburg 520S-1500-400 injection moulding machine. Contact us for further details. • Programmable and controlled clamping force build-up; advanced clamping program with 2 stages Lasdpoyg I Egefx Al Nja • Hydraulic, servo-driven ejector on moving platen • Screw diameter: 45 mm (without nozzle) • Highly wear-resistant design; sintered metal non-return ring; CrN coating on screw and non-return ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology Level 2: servo-controlled dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circuit with additional cooling and filtration • SELOGICA direct control with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating power zones 1-6: each 3.6 kW (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Operating hours: 13,361 Additional equipment • None included in the list • Robot/automation ready: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robotic system

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Na voljo je popolnoma opremljen brizgalni stroj Arburg, vključno z enoto za filtracijo dovoda čistega zraka (Filter Fan Unit) in odvzemnim robotom. Zapiralna sila: 1600 kN, premer polža: 45 mm, maks. segrevanje valja: 450°C, skupna priključna moč: 85,5 kW, dvig stroja: 100 mm, delovni čas: cca 9171 h. Arburg Multilift H: os: B, hod po osi Z: 1400 mm, dolžina transportnega traku: 2500 mm, širina traku: 600 mm, območje višine odlaganja: 900 mm-1300 mm, temperaturna odpornost: 160°C. Dokumentacija je na voljo. Ogled na lokaciji je možen. Laedpfx Aleyab I Uo Noa

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), injekcijska masa: 2.424 g, This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is a fully electric injection molding system with a maximum throughput of 390 kg/h PET and a maximum shot weight of 2,424 g PET. The clamping unit is fully electric with toggle drive and features an integrated control system for auxiliary equipment. Take advantage of this opportunity to buy the Husky HPETL230E-RSE95D-95 electric injection molding machine. Contact us for further information about this machine. Additional Equipment • Mold Dehumidifier: Includes hood, spare parts package, and piping • Conveyor Belt: Dual-sided preform filling system for cartons/cages Machine Benefits Technical Machine Benefits • The package comprises two machines as well as additional components such as pellet silos, pellet feeding, foreign matter removal system for pellets, color dosing unit, and platform. Everything visible in the photos is included. • Maximum throughput: 390 kg/h PET • Clamping unit: Fully electric with toggle drive • Clamping platen: Movable, guided on rollers • Type: Split version • Dryer: DR815HT-G3 with 4,000L drying hopper (stainless steel, insulated) • Husky 1: 3 tools – 28-cavity hot runner, 17.8/26/30.3 grams • Husky 2: 2 tools – 38-gauge neck, 18/29 grams Additional Information Clamping Force Clamping unit: Fully electric with toggle drive Clamping platen: Movable, guided on rollers Control System Control: Integrated control system for auxiliary equipment Display for cooling water temperature/pressure (supply/return) Control output for color dosing unit Lubrication system: Automatic Mixer: Integrated in the nozzle Molds: H-PET injection mold with 48 cavities Preform weight: 17.8 g and 30.26 g Core size: 50 x 140 mm Includes: 3-position take-off plate, basic spare parts package H-PET injection mold with 32 cavities Preform weight: 18 g and 29 g (38 mm Bericap) Lasdpex D Hvwsfx Al Nja Core size: 63.5 x 140 mm Includes: 3-position take-off plate, basic spare parts package Features Temperature monitoring and adjustment Continuous level measurement Variable dew point setting Conveyance: Hot material conveyed via vacuum unit P07 to booster bin (HAD400) Color Dosing Units For solid color: Volumetric, 4 dosing screws For liquid color: 4 dosing pumps Preform Production Specifications Preform weight: 17.80 g Neck finish: PCO1881 LW Length: 89.35 mm Wall thickness: 3.06 mm Base: 2.30 mm Form: Bell Cavities: 48 Cycle time: 12.4 ±0.3 s Preforms per hour: 13,935 Annual output (95% availability): 111,205,000 Throughput (kg/h): 248 Energy consumption: 506 Wh/kg PET Preform weight: 29.00 g Neck finish: Bericap 38 Length: 108.59 mm Wall thickness: 3.16 mm Base: 2.42 mm Form: Bell Cavities: 32 Cycle time: 13.7 ±0.3 s Preforms per hour: 8,409 Annual output (95% availability): 67,101,000 Throughput (kg/h): 244 Energy consumption: 532 Wh/kg PET Preform weight: 18.00 g Neck finish: Bericap 38 Length: 82.04 mm Wall thickness: 2.70 mm Base: 2.20 mm Form: Bell Cavities: 32 Cycle time: 11.3 ±0.3 s Preforms per hour: 10,195 Annual output (95% availability): 81,353,000 Throughput (kg/h): 184 Energy consumption: 506 Wh/kg PET Preform weight: 30.26 g Neck finish: PCO1881 LW Length: 122.30 mm Wall thickness: 3.00 mm Base: 2.30 mm Form: Class Cavities: 48 Cycle time: 14.7 ±0.3 s Preforms per hour: 11,755

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 45.343 h, vpenjalna sila: 1.500 kN, premer vijaka: 35 mm, tlak vbrizgavanja: 2.000 letvica, injekcijska masa: 141 g, Arburg 520S-1500-400 (217) General Information Item number: (217) Availability: In stock Year of manufacture: 2008 Brand: Arburg Technical Data Shot weight: 141 g Clamping force: 1,500 kN Screw diameter: 35 mm Injection pressure: 2000 bar Tie bar distance: 520 x 520 mm Platen size: 688 x 688 mm Minimum installation height for mould: 250 mm Control system: Selogica Language: English, German Power: 33.9 kW Laedpfx Asvt Sixol Nja Operating hours: 45,343 h Weight: 6,490 kg Dimensions: 4.9 x 1.7 m Hopper: No Core pull: Yes Euromap interface: Yes Air valve: Yes Heated channel: Yes