Stroj za brizganje

Arburg 520 S 1500-400

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 9.171 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, proizvajalec krmilnikov: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1,600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances operator comfort. Take advantage of this opportunity and purchase this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Advanced two-stage clamping program • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • Highly wear-resistant design • Sintered metal check ring • CrN coating on screw and backflow ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology level 2 – servo-controlled dual-circuit pump system: • Two regulated hydraulic pumps enable precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration Godpfx Adsyg I Ihjkska • SELOGICA direct control: • Touchscreen operation with process editor • 15-inch display (38.1 cm) • Multilingual user interface (German, English, local language) • Heating power zones 1–6: each 3.6 kW (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Operating hours: 9,171 Additional equipment • Not included in the listing • Note: The machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Na voljo je skoraj nova brizgalna naprava Arburg. Zapiralna sila: 1600kN, razdalja med stebri: 520mm, zapiralni hod: 364mm, izmetalni hod: 150mm, izmetalna sila: 40kN, brizgalna enota: 400, brizgalni tlak: 2500bar. Dimenzije stroja D/Š/V: ca. 6000mm/1800mm/2200mm, teža: ca. 6000kg, krmiljenje: Selogica, delovne ure: ca. 67h. Vključno z zaščitnim ohišjem s čistim zrakom FilterFanUnit in odjemnim robotom. Dokumentacija na voljo. Ogled na lokaciji je možen. Gksdsw Rqwtjpfx Adkea

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 13.361 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, proizvajalec krmilnikov: ARBURG, This Arburg 520S-1500-400 injection moulding machine was manufactured in 2016. It features a clamping force of 1600 kN, a 45 mm screw diameter, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances user-friendliness. Take advantage of this opportunity and purchase the hydraulic Arburg 520S-1500-400 injection moulding machine. Contact us for further details. • Programmable and controlled clamping force build-up; advanced clamping program with 2 stages • Hydraulic, servo-driven ejector on moving platen • Screw diameter: 45 mm (without nozzle) • Highly wear-resistant design; sintered metal non-return ring; CrN coating on screw and non-return ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology Level 2: servo-controlled dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circuit with additional cooling and filtration • SELOGICA direct control with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating power zones 1-6: each 3.6 kW (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Operating hours: 13,361 Gkjdpfxeyg I Egs Adkoa Additional equipment • None included in the list • Robot/automation ready: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robotic system

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Na voljo je popolnoma opremljen stroj za brizganje Arburg, vključno z enoto za filtracijo in dovod čistega zraka ter robotom za odvzemanje izdelkov. Zapiralna sila: 1600 kN, premer polža: 45 mm, največja temperatura valja: 450°C, skupna priključna moč: 85,5 kW, povišanje stroja: 100 mm, delovni čas: cca 13.361 h. Arburg Multilift H: os: B, pomik osi Z: 1400 mm, dolžina transportnega traku: 2500 mm, širina traku: 600 mm, višina odlaganja: 900-1300 mm, temperaturna odpornost: 160°C. Dokumentacija je na voljo. Ogled na lokaciji je možen. Gedpfxeyab Nfe Adkeka

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Ponujata sta 2 brizgalna stroja, letnika 2008 in 2009. Zapiralna sila: 500 kN, razdalja med vodili X/Y: 320 mm/320 mm, vpenjalne plošče za orodja X/Y: 446 mm/446 mm, hod odpiranja: 350 mm, maksimalna razdalja med ploščami: 550 mm, brizgalna enota 170: premer polža: 25 mm-30 mm, volumen hoda: cca. 59 ccm/25 mm polž, cca. 85 ccm/30 mm polž, masa brizga: cca. 62 g do 77 g, brizgalni tlak: do 2500 bar. Ogled je možen po dogovoru. Gsdpfxsx I Rqcj Adkeka

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 45.343 h, vpenjalna sila: 1.500 kN, premer vijaka: 35 mm, tlak vbrizgavanja: 2.000 letvica, injekcijska masa: 141 g, Arburg 520S-1500-400 (217) General Information Gjdevt Sixspfx Adkjka Item number: (217) Availability: In stock Year of manufacture: 2008 Brand: Arburg Technical Data Shot weight: 141 g Clamping force: 1,500 kN Screw diameter: 35 mm Injection pressure: 2000 bar Tie bar distance: 520 x 520 mm Platen size: 688 x 688 mm Minimum installation height for mould: 250 mm Control system: Selogica Language: English, German Power: 33.9 kW Operating hours: 45,343 h Weight: 6,490 kg Dimensions: 4.9 x 1.7 m Hopper: No Core pull: Yes Euromap interface: Yes Air valve: Yes Heated channel: Yes

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 3.752 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.150 mm, pomik osi Y: 700 mm, pomik po osi Z: 550 mm, hitro pomikanje X-os: 42 m/min, hitri pomik os Y: 42 m/min, hitri pomik na osi Z: 42 m/min, proizvajalec krmilnikov: Heidenhain, model krmilnika: 640, največja hitrost vrtenja: 20.000 obr/min, skupna masa: 9.650 kg, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 20.000 obr/min, delovne ure vretena: 1.615 h, dovod hladilne tekočine: 40 letvica, nos vretena: SK40, število mest v zalogovniku orodij: 120, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Stroj je v zelo dobrem tehničnem stanju! Gksdpfx Ajzaqz Djdkoa

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2007, Funkcionalnost: nefunkcionalno, For sale is an injection moulding machine from the brand Netstal, model Synergy 1000-230. After a transport accident, the control cabinet is completely defective; for this reason, the machine is being offered as a spare parts donor or for repair. The machine would otherwise be fully operational and in good condition. Technical data: Operating pressure: 210 bar Injection force: 182 kN Clamping force: 1000 kN Opening stroke: 0-400 mm Mould installation height: 450-750 mm Total weight: 7,200 kg Operating hours: approx. 53,000 Gsdorfbnmjpfx Adkska Available from March 2024. Initial hydraulic oil fillings can be ordered from us. Upon request and for an additional charge, loading and transport (Europe-wide) can be organised. Prices plus VAT. Inspection possible by appointment. Please contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, please visit our website.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036946, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 183 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.850 mm, skupna masa: 5.600 kg, ogrevalna zmogljivost: 11,5 kW (15,64 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 735 mm, teža orodja: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base-level injection moulding machine, precisionMolding, represents the perfect entry-level solution for all-electric injection moulding, ensuring fast and innovative responses to market demands. This machine combines high performance, intuitive operation, and short delivery times. It can be utilised in a range of applications such as packaging, electrical and electronics industries, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the fully electric machine concept – Fast delivery through a base machine concept with a broad range of options available TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM  MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Maximum mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platen (h x v) mm 610 x 560  Mould height min. – max. mm 150 - 400  Maximum opening span mm 750  Maximum mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Maximum mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 40 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1860  Shot volume cm³ 201  Max. shot weight for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticising rate (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heating capacity kW 11.5  Power supply V / Hz 400 / 50 3 phase with neutral conductor WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Wear-resistant plasticising unit  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve, single (BWAP)  Pneumatic operation for hot runner shut-off, single  Electrical cascade interface, 4-fold  Euromap interface (handling), E18, E63 Gkedpfxeud H Dmo Adkja  Euromap interface (central computer), E67, E77  Water manifold, 4-fold  Automatic central lubrication system  Adaptive Process Control (APC)  Injection-compression moulding circuitry  Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18643 Manufacturer: ARBURG Model: 470 C 1500-400 Golden Edition Year of manufacture: 2008 Clamping Unit Clamping force: 150 t Opening stroke: 500 mm Tie bar spacing (h x v): 470 x 470 mm Min. mold height: 250 mm Daylight opening: 750 mm Injection Unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight (PS): 141 g Injection pressure: 2,500 bar Dimensions & Weight Dimensions (LxWxH): 4.6 x 1.6 x 2.1 m Machine weight: 4,850 kg Additional Information & Extras Core pull: 1 unit Godpfxjxvy Rlo Adkeka Additional Information: Communication card for ProSeS interface available (OPC-UA) Robot interface available (EUROMAP 67) The Golden Edition is a special version of the proven ALLROUNDER C-series, distinguished by optimized hydraulic performance, stable process control, and high reliability. The machine features a clamping force of 150 tons and is ideally suited for the production of technical plastic components as well as for applications with high quality requirements. Typical advantages of this series include: * Robust and durable design * High process stability and repeat accuracy * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition additionally stands out due to its optimized performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is often used in sectors such as automotive supply, technical plastic parts, and series production.