Arburg 370S 600-290 (2009) nakup rabljenega (14.925)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, ARBURG 370 S — 600-290 | Screw Diameter 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Locking force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Minimum mold height: 200 mm Maximum daylight: 600 mm Tie bar spacing: 370 × 370 mm Platen size: 510 × 510 mm Maximum weight of moving mold half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total installed power: 23.9 kW 💉 INJECTION UNIT — ø 35 mm Maximum screw stroke: 150 mm Effective screw length L/D: 20 Maximum injection volume: 132 cm³ Maximum shot weight: 20.5 g PS Maximum material throughput: 10.5 kg/h PS Maximum injection pressure: 2000 bar Maximum injection flow rate: 140 cm³/s Injection flow rate with accumulator: 430 cm³/s Maximum back pressure: 350 / 200 bar Maximum screw speed: 54 m/min Maximum screw torque: 380 Nm Hfjdpjy Nmkbofx Alfeg Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zones / 5.8 kW Nozzle heating: 0.6 kW Tank capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3,300 kg Electrical connection: 80 A

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Arburg 370H 600-290 with Geiger MiniServo II sprue picker / Hybrid machine Year of manufacture: 08.2014 Injection unit: Screw diameter: 30 mm Shot weight: 97 g Injection pressure: 2500 bar Plasticizing volume: 106 cc Clamping unit: Clamping force: 60 t Tie bar spacing: 370x370 mm Platen size: 510x510 mm Ejector: electric Clamping system: toggle lever Control system: SELOGICA – Touchscreen Additional equipment: Production line with Arburg Multilift Select robot and conveyor belt Electric machine: high-speed, energy-saving, and very quiet Operating hours: 32,839 h in automatic mode Euromap 67 Euromap 12 Robot interface 2x pneumatic valves 1x hydraulic core pull Control for 6 hot runners Hardened injection unit – bimetallic Main machine motor: servo-driven by inverter – energy saving Proportional valve on injection unit – precise dosing Central lubrication Hodpfx Ajy Smr Dolfjfg Kistler sensor – mold pressure control Machine with two cylinders / accumulator with compressed nitrogen (additional charging for fast operation) Integrated Arburg conveyor belt and sorting flap Geiger MiniServo II sprue picker Year of manufacture: 2018 X and Y axes driven electrically by servomotors Purchase of the sprue picker at extra cost Dimensions: Weight: 3,600 kg Length/Width/Height: 4.00x1.45x2.04 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our location in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Arburg 370S 600-70 Year of manufacture: 2008 Injection Unit: Screw diameter: 25 mm Shot weight: 40 g Injection pressure: 1,550 bar Dosage volume: 44 cm³ Clamping Unit: Hfodjy Smrqjpfx Alfjg Clamping force: 60 t Tie bar spacing: 370 x 370 mm Platen size: 510 x 510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional Equipment: Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 1 Hot runner control x 6 Hardened injection unit - bimetallic Integrated sorting flap Integrated side-entry original Arburg sprue picker Option to configure the vertical injection unit with special brackets Possibility to change the screw diameter to 22, 25, or 30 mm Dimensions: Weight: 3,160 kg Length/Width/Height: 3.48 x 1.46 x 2.03 m All machines offered are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our premises in Łódź. Price: On request

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), Installation height min./max.: 200mm/595mm, opening stroke: 200mm, clamping force: 600kN, screw diameter: 25mm, tie bar spacing: 370mm, max. injection volume: 49cm³, operating hours: 55,682h. Documentation available. On-site inspection possible. Hedpfet E Tq Rsx Alfofg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 67.848 h, vpenjalna sila: 700 kN, premer vijaka: 35 mm, delovna prostornina: 144 cm³, tlak vbrizgavanja: 2.000 letvica, injekcijska masa: 132 g, Injection Moulding Machine Arburg 370S-700-290 Item Number: 232 Availability: In stock Year of Manufacture: 2008 Brand: Arburg Technical Specifications Shot Weight: 132 g Clamping Force: 700 kN Screw Diameter: 35 mm Injection Pressure: 2000 bar Hedevwcbgjpfx Alfsfg Tie Bar Distance: 370x370 mm Platen Size: 510x510 mm Minimum Mould Height: 200 mm Maximum Platen Distance: 600 mm Control System: Selogica Language: German Power: 23.9 kW Operating Hours: 67,848 h Weight: 3,300 kg Dimensions: 3.8x1.5 m Hopper: No Euromap Interface: Yes Air Valve: Yes

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09.2011 Injection unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosage volume: 144 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Hfjdpfx Aljy Smdgsfog Control system: SELOGICA - touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic core pull, controlled by proportional valve x 2 Reinforced injection units – bimetallic Proportional valves on injection units - precision moulding Machine with two cylinders/batteries with compressed nitrogen (additional charge for rapid operation) Parallel movements Screw diameter in vertical injection unit: ⌀25 mm - 45 g/PS Original rotary table Purchase of rotary table at extra cost Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes driven by servo motors (electric); C-axis and A motion Travel on axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel Robot safety package Robot with adapter, protective housing Purchase of robot at an additional cost Dimensions: Weight: 6720 kg Length/Width/Height: 4.41x1.84x3.20 m All machines offered are started and checked by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, vpenjalna sila: 1.600 kN, premer vijaka: 30 mm, injekcijska masa: 97 g, Hydraulická vstřikovací lis z roku 2021. Tento Arburg ALLROUNDER 570 S 1600 - 290 má maximální uzavírací sílu 1600 kN a průměr šneku 30 mm. Má vypočítaný objem dávky 106 cm³ a dávkovací výkon 97 g/PS. Pokud hledáte vysoce kvalitní vstřikovací lis, doporučujeme zvážit Arburg ALLROUNDER 570 S 1600 - 290. Pro více informací nás kontaktujte. • Rozteč sloupků: 570 mm • Vstřikovací jednotka (EUROMAP): 290 Hjdpfey Nkqrjx Alfofg • Vypočítaný objem dávky: 106 cm³ • Max. vstřikovací tlak: 2 500 bar • Minimální montážní výška formy: 450 mm • Provozní hodiny: 3 159 (automaticky) • Rozsah napětí (AES systém): 380–480 V • Frekvence: 50–60 Hz • Objem zásobníku: 50 l • Max. přípustná teplota (chlazení): 140 °C • Průtok vzduchového ventilátoru: 1 000 l/min • Kombinace zásuvek: 16 A s 1× CEE a 1× Schuko

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 700 kN, Oprema: dokumentacija / priročnik, Seologica krmiljenje Vpenjalna sila: 70 t Premer vijaka: 40 mm (visoko trdna izvedba) Razdalja med stebri V: 370 mm Razdalja med stebri H: 370 mm Razmik med stebri: 370x370 mm Platišča HxV: 510x510 mm Debelina orodja min-maks: 200 Hod: 400 mm Prostornina brizgalnega polnjenja: 188 cm3 Tip: Uni Pogon: hidravlični Zračni ventil: 1 Delovne ure: 23.000 2 servo črpalki 4 prosti hladilni krogi Hfedpfx Aleygtquefjg 6 električnih grelnih con za orodje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 78.099 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 25 mm, skupna višina: 2.800 mm, skupna masa: 10.700 kg, Oprema: dokumentacija / priročnik, Arburg 520S 1600 290/70 2 komponenty 12,3 mil. cyklov 86 565 hodín ručný režim 78 099 hodín automatický režim Vstrekovacia jednotka 1 horizontálna 290, priemer 25 mm, max. 71 cm³ Vstrekovacia jednotka 2 vertikálna 70, priemer 18 mm, max. 21 cm³ Otvárací zdvih: 925 mm Elektrický indexový otočný pohyb 12-zónový horúci kanál integrovaný 3x ťažné jadrá 2x vyfukovanie (ovládanie ihlového uzáveru) Rôzne zákaznícke vstupy a výstupy Rozhrania: Hsdpfx Aloxzix Aefefg ALS Temperovacie zariadenia Sušička Multilift H 6kg: 2x vákuum 5x dvojčinný uchopovač Z-os servo, 800 mm C, G, X a B os pneumatická Rôzne zákaznícke vstupy a výstupy (monitoring uchopovačov atď.) Dôležité upozornenie! Daňová informácia a výhoda pre použité stroje Od 1.7.2025 je možné uplatniť aj použité stroje na mimoriadny odpis vo výške 30 % ročne. Okrem priaznivejšej ceny v porovnaní s novým zariadením môžete uplatniť rovnaké odpisy ako pri novom stroji. Kľúčové slovo: booster rastu (§ 7 odst. 2 EStG-E)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 78.100 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 25 mm, Arburg 520S 1600 290/70 2-Component Injection Moulding Machine 78,099 operating hours, automatic Injection unit 1 horizontal, 290, diameter 25 mm, max. 71 cm³ Injection unit 2 vertical, 70, diameter 18 mm, max. 21 cm³ Opening stroke: 925 mm Electric indexing rotation 12-zone hot runner system integrated 3x core pull Hfjdpex A Dy Rjfx Alfjg 2x air blow (control for needle valve) Various customer-specific inputs and outputs Interfaces: - ALS - Temperature control units - Dryers Multilift H 6 kg: 2x vacuum 5x double-acting gripper Z-axis servo, 800 mm C, G, X, and B axes pneumatic Various customer-specific inputs and outputs (gripper monitoring, etc.) At Maschinen-Handel, we provide a start-up guarantee with every machine purchased from us, and the machine is commissioned by the manufacturer. This offers you, as a customer, maximum security on the used machinery market. Important Notice!!! Current information – Tax notice and benefit for used machinery As of 01/07/2025, used machines can also be considered for tax purposes with a special depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for new machines. Keyword: Growth Booster (§7, Paragraph 2, German Income Tax Act – draft).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, število vbrizgov: 2, Here we, as a dealer of injection moulding machines, offer the following well-maintained, pre-owned injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines with a manufacturing year from 2010 onwards. We have been a wholesale distributor of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-Component Machine Year of manufacture: 2009, from first German ownership • Total cycles: 12.3 million • Manual operation: 86,565 hours • Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal – 290 • Screw diameter: 25 mm • Shot volume: 71 cm³ Injection unit 2 – vertical – 70 • Screw diameter: 18 mm • Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm • Max. platen distance: 925 mm Opening stroke: 675 mm Mould installation height: 250 mm • Electric index rotation included Extras Hot runner / additional axes • 12-zone hot runner integrated • 3x core pulls • 2x blow-off functions Hjdpfxeyzumzo Alfofg  → incl. control for needle shut-off • Various customer-specific inputs and outputs Interfaces / communication • ALS • Connection for temperature control units • Connection for dryers Handling / Multilift H (6 kg) • 2x vacuum circuits • 5x double-acting gripper functions • Z-axis servo-driven, 800 mm stroke • C, G, X, and B axes pneumatic • Various customer-specific inputs and outputs  → incl. gripper monitoring Complete maintenance documentation for the last 3 years: - Both injection units have been newly sealed by Arburg - Clamping unit completely resealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty up to initial commissioning Loading/Shipping Free loading onto buyer’s truck or free delivery within Germany subject to freight reimbursement Worldwide delivery Available from our warehouse in Hannover, Germany Important information about the machines we offer and our company: - We only sell machines purchased from ongoing production, available from our Hannover warehouse - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property - All offered machines originate from successful companies where maintenance and care are a matter of course - All machines offered can be inspected at our warehouse

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, vpenjalna sila: 1.600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced controls for both injection units and supports multi-component processing. If you are looking for a high-quality injection moulding machine, you should consider the hydraulic injection moulding machine Arburg Allrounder 520 S 1600-290 / 290, which we are offering for sale. Please contact us for further details. • Injection Units and Plasticising • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Programmable and controlled nozzle contact force • aXw control ScrewPilot • 2nd injection unit: • 2nd injection aggregate 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Programmable and controlled nozzle contact force • aXw control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multicomponent processing; separation plane device on short skids for the 2nd • Injection with tool closed ("flying injection") • Drive, Hydraulics, and Cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l capacity (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; enhanced cooling performance • Controlled machine cooling circuits • Clamping System, Ejector, and Core Pulls • Clamping platen set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1, simultaneous movement (P/Q controlled, programmable) • Core pull 2, simultaneous movement (P/Q controlled, programmable) • Core pull 3, simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 including pressure reducer • Electrical core pull control 1 (requires VE 436/00) • Pneumatic/Hydraulic tool connections • Electrical connection pneumatic NVD 1 (in the tool) • Electrical connection pneumatic NVD 2 (in the tool) • Electrical and hydraulic connection NVD 3 (in the tool) • Electrical and hydraulic connection NVD 4 (in the tool) • Blow-off device 1 with pressure reducer; connection for blow-off device 2 • Cooling water and tool circuit • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to the fixed platen; 3 cooling water circuits to the moving platen Hfodpoyxdwdjfx Alfog • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and Electrics • Selogica direct control; technology level • Circuit protection for heating circuits (1-6 with 16 A) • 15 electric heating circuits for tool heating • Boost function for heating circuits (hot runner) • Upper protective guard open, raised to safety distance • Fault display with flashing indicator • Operator authorization via chip card (EUROMAP 65) • Interfaces and Connectivity • Interface for conveyor belt (machine base) • Prepared for 6-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA

Stanje: rabljeno, Leto izdelave: 2000, skupna masa: 60 kg, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Hfsdex Iwc Eopfx Alfjg Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 73.000 h, vpenjalna sila: 70 kN, delovna prostornina: 49 cm³, tlak vbrizgavanja: 2.500 letvica, skupna masa: 3.500 kg, premer polžastega transporterja: 253.035 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Hodpfx Ajy Ntmielfjfg Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 73.000 h, vpenjalna sila: 70 kN, delovna prostornina: 49 cm³, tlak vbrizgavanja: 2.500 letvica, skupna masa: 3.500 kg, premer polžastega transporterja: 25 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto Hfjdpfxsy Ntmcj Alfsg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Arburg 370S 700-100/100 / 2K Machine / Operating hours: 33,544 in automatic mode / Very good technical condition Year of manufacture: 2009 Injection Unit: Screw diameter: 30 mm Shot weight: 65 g Injection pressure: 1390 bar Metering volume: 71 cm³ Clamping Unit: Clamping force: 70 t Tie bar spacing: 370 x 370 mm Size of mounting plates: 510 x 510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Hfedpfx Aley Smtusfsg Additional equipment: 2K machine (two-component) Operating hours: 33,544 in automatic mode Euromap 67 Robotics interface Air valve x 5 Hydraulic core pull x 2 Control system for hot runners Reinforced injection units – bimetallic Proportional valves on injection units – precise injection Parallel movements Vertical injection unit – screw diameter fi 20 mm (29 g/PS) Machine with cylinder / battery with compressed nitrogen (additional charging for faster operation) Machine equipped with integrated Arburg conveyor belt and original sorting flap Option to purchase original Weber rotary table Possibility to change screw diameters in both injection units for manufacturer-recommended screw sizes Dimensions: Weight: 4440 kg Length/Width/Height: 3.48 x 1.58 x 2.97 m Drive: Pump/motor: 15 kW Heating power: 4.9 kW Total power: 19.9 kW All offered machines are started up by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Arburg 370E 600-170 with Arburg Multilift Select Robot / All-Electric Injection Moulding Machine Year of manufacture: 11.2017 Injection Unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosage volume: 85 ccm Clamping Unit: Clamping force: 60 t Tie bar spacing: 370x370 mm Platen size: 510x510 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Production line including Arburg Multilift Select robot and conveyor belt Fully electric machine: high-speed, energy-efficient and very quiet Operating hours: h in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Control for hot runners x 24 Injection unit: hardened bimetal Main motor: servo motor with inverter drive – energy saving Injection unit driven by servo motor controlled by inverter Parallel movements Central lubrication Machine equipped with two gas cylinders / battery with compressed nitrogen (for fast cycle times) Built-in Arburg conveyor belt and sorting flap Arburg Multilift Select 6 kg traversing robot Year of manufacture: 11.2017 4-axis robot: 3 axes driven by servo motors (electric), C-axis pneumatic Movement range in axes: X-600, Y-800, Z-1800 mm Hodoy Smrkopfx Alfofg Robot safety package included Robot with adapter and protective enclosure Robot and conveyor belt can be purchased at additional cost Dimensions: Weight: 3600 kg Length/Width/Height: 4.00x1.45x2.04 m All machines offered are started and checked by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to take part in live technical demonstrations at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 370H 600-100 Year of manufacture: 11.2011 Injection Unit: Screw diameter: 30 mm Shot weight: 65 g Injection pressure: 1,390 bar Dosing volume: 71 ccm Clamping Unit: Clamping force: 60 t Tie bar spacing: 370x370 mm Platen size: 510x510 mm Ejector: electric Clamping mechanism: toggle lever Control: SELOGICA – Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valves x 3 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened – bimetallic Main motor of the machine – servo motor driven by inverter – energy-saving The injection unit is driven by a servo motor, controlled via inverter Machine equipped with compressed nitrogen accumulator (additional charge for fast operation) Central lubrication Dimensions: Weight: 3,190 kg Hfsdpfx Aley Smq Tjfog Length/Width/Height: 3.68x1.45x2.04 m All offered machines are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Arburg 320C 600-250 / Machine in very good technical condition Year of manufacture: 2001 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1820 bar Dosage volume: 144 ccm Clamping unit: Clamping force: 60 t Tie bar distance: 320x320 mm Platen size: 446x446 mm Hfodpfxey Smqme Alfeg Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition The machine was used to manufacture medical industry injection-moulded parts – clean production conditions Core pull control Injection unit hardened – bimetallic Integrated sorting flap Dimensions: Weight: 2330 kg Length/Width/Height: 3.65x1.48x1.99 m Drive: Pump/Motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Arburg 370S 500-100 Rok výroby: 10/2010 Vstřikovací jednotka: Průměr šneku: 30 mm Vstřikovací hmotnost: 65 g Vstřikovací tlak: 1390 bar Dávkovací objem: 71 ccm Uzavírací jednotka: Uzavírací síla: 50 t Rozteč sloupků: 370x370 mm Velikost upínacích desek: 510x510 mm Vystřikovač: hydraulický Hedpfx Asy Smqgjlfjfg Uzavírací jednotka: hydraulická Ovládání: SELOGICA – dotykový displej Přídavné vybavení: Euromap 67 Rozhraní pro robota Hydraulický jádrový tah x 1 Ovládání pro horké kanály x 12 Vstřikovací agregát je odolný proti opotřebení a korozi Proporcionální ventil na vstřikovací jednotce – precizní vstřikování Stroj pracoval v čisté produkci Rozměry: Hmotnost: 3300 kg Délka/Šířka/Výška: 3,48x1,46x2,03 m Všechny nabízené stroje jsou před prodejem spuštěny našimi servisními techniky. Je možné získat video z technických zkoušek vybraného stroje nebo se zúčastnit živých technických zkoušek v našem podniku v Lodži. Cena: Na vyžádání

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Arburg 370C 600-100 Leto izdelave: 1995 Brizgalna enota: Premer polža: 30 mm Teža brizga: 59 g Tlak brizganja: 1550 bar Dozirni volumen: 70 ccm Zapiralna enota: Hfedoy Smqajpfx Alfeg Zapiralna sila: 60 t Razmak med veznimi drogovi: 370x370 mm Velikost vpenjalnih plošč: 570x570 mm Izmetalec: hidravlični Zapiralna enota: hidravlična Krmiljenje: DIALOGICA Dodatna oprema: Zračni ventil x 1 Hidravlični vlekerna x 2 Mere: Teža: 3600 kg Dolžina/širina/višina: 4,30x1,59x2,08 m Pogon: Črpalke/motor: 11 kW Grelnik: 4,2 kW Skupna moč: 15,2 kW Vsi ponujeni stroji so pred prodajo zagnani s strani naših serviserjev. Možno je pridobiti video tehničnih preizkusov izbranega stroja ali se udeležiti tehničnih živih testov v našem podjetju v Lodžu. Cena: na zahtevo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Arburg 370S 500-70 Année de fabrication : 08.2010 Unité d'injection : Diamètre de vis : 25 mm Poids d'injection : 40 g Pression d'injection : 1550 bar Volume de dosage : 44 cc Unité de fermeture : Force de fermeture : 50 t Écartement des colonnes : 370x370 mm Taille des plateaux : 510x510 mm Hjdpfjy Smppjx Alfsfg Ejecteur : hydraulique Unité de fermeture : hydraulique Commande : SELOGICA - Écran tactile Équipement supplémentaire : Euromap 67 Interface robot Vanne à air x 8 Noyau hydraulique x 1 Commande de canaux chauds x 6 Unité d'injection trempée - bimétallique Possibilité de réglage de l’unité d’injection verticale à l’aide de supports spéciaux Possibilité de modifier le diamètre de vis à 22, 25 ou 30 mm Dimensions : Poids : 3 170 kg Longueur/Largeur/Hauteur : 3,48 x 1,46 x 2,03 m Toutes les machines proposées sont démarrées et testées par nos techniciens de service avant la vente. Une vidéo des essais techniques de la machine sélectionnée peut être fournie ou vous pouvez assister à des essais techniques en direct sur notre site de Łódź. Prix : Sur demande

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Arburg 570S 2200-290/100/100 / Production Line with Wittmann W823 Robot / Operating hours: 20,499 h in automatic mode Year of manufacture: 2016 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2,000 bar Dosage volume: 144 cm³ Clamping Unit: Clamping force: 220 t Tie bar spacing: 570 x 570 mm Platen size: 795 x 795 mm Ejector: hydraulic Clamping system: hydraulic Control system: SELOGICA - touchscreen Additional Equipment: 3-component high-speed injection moulding machine Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface 6x air valves 4x hydraulic core pulls with proportional valve control Hot runner control Hardened injection unit - bimetallic Proportional valve on the injection unit – precise dosing Machine with two cylinders / battery with compressed nitrogen (extra capacity for fast operation) Machine is designed for operation with an electric rotary table. The machine is equipped with an inverter for servo motor control on the rotary table and an interface for rotary table connection Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/PS Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/PS Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servo motors (electric); Axis C and A movement Axis travel: X-550, Y-1400 (telescopic), Z-3500 Touch panel control Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor at extra cost Dimensions: Weight: 10,830 kg Length/Width/Height: 5.53 x 1.77 x 3.29 m Hsdpfxsy Smfko Alfjfg All machines offered are started up by our service technicians before sale. It is possible to receive a video of technical tests of the selected machine, or participate in live technical demonstrations at our facility in Łódź. Price: on request

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 46.201 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 784 kN, premer vijaka: 30 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! TEHNIČNI PODATKI Zapiralna sila: 80 t Premer polža: 30 mm Razmak med stebri: 370 mm x 370 mm Hfodpfxjy Ew Rde Alfog PODROBNOSTI O STROJU Delovne ure: 46.201 h OPREMA Odvzemalnik litine (angusspicker) Opomba: Ob nakupu več artiklov z iste lokacije (glejte ponudbe spodaj) vam bomo obračunali ugodnejše stroške demontaže in nalaganja.

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Six Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470bar, injection volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, daylight between platens: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Inclusive of Multilift handling unit. Hfodpfetyyn Hjx Alfjg 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470bar, injection volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, daylight between platens: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Inclusive of Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500bar, injection volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, daylight between platens: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340bar, injection volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, daylight between platens: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500bar, injection volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, daylight between platens: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Inclusive of Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500bar/2,340bar, injection volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, daylight between platens: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. Inspection on site is possible.