Aerotherm Tunel Za Uv/Ir Lakiranje nakup rabljenega (85.527)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, UV/IR tunel v formatu B1 z avtomatskim izlaganjem. Možna montaža na sito ali B1 ofset stroj, omogočeno podajanje iz drugega stroja ali lakirke. Blodpfx Acoxn T Nxomsh

Stanje: dober (rabljeno), Heidelberg SBGZ za UV lakiranje z sušilnikom Maksimalna velikost: 56 x 77 cm Stroj ima valj za UV lak Omogoča parcialno (spot) in popolno lakiranje Sušilnik EMA UV Eko V zelo dobrem stanju Bjdpfxjpwkgxs Acmslh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, I am selling a 2-head UV drying tunnel, Superfici Essiccatoio UV. Model: Poliedra S.Cure 1650x2 + TT1 3500. Year of manufacture: 2015. Available immediately. Requires repair: Display, power sources for both UV units. Blsdpfx Acjffk Etomsh

Stanje: rabljeno, Binks B8 Črpalke za visokotlačno barvanje Črpalna enota BINKS B8 je proizvedena s strani BINKS, podjetja, znanega po brizgalnih pištolah in dodatkih že od leta 1890. Izdelki Binks se uporabljajo v številnih panogah po vsem svetu, od avtomobilizma do rešitev za industrijsko barvanje. Bjdpfx Asy Ud Smjcmelh Črpalna enota BINKS B8 je vsestranska in primerna za širok spekter industrijskih in avtomobilskih aplikacij. Cena novega:

Leto izdelave: 2013, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GE-KEK-100L, Teljes porfestő rendszer eladó, amely tartalmazza a vegyi előkezelő kabint, a porfestő fülkét és a beégető kemencét. A rendszer teljesen működőképes, jól karbantartott és azonnal elérhető. Ideális fémmegmunkáló üzemek, kisipari termelők vagy bérporfestéssel foglalkozók számára. A berendezés megfelel az EU ipari szabványainak, teljes elektromos vezérlőrendszerrel felszerelt. A rendszer tartalma: 1️⃣ Vegyi előkezelő kabin Kézi permetezésű, felülettisztító, vegyi előkezelő egység porfestés előtti felület előkészítéshez. Kabinméret: 1600 × 1600 × 2200 mm Vegyi tartály kapacitása: kb. 800 L Szivattyú/permetező egység: ST84 HE Fűtőelemek: 2 × 6 kW Vízhőmérséklet: 45–60°C Motor teljesítmény: kb. 1,5 kW Elektromos csatlakozás: 3×380/220 V Zárt keringtető rendszer Vegyszerálló kialakítás 2️⃣ Ipari porfestő fülke Külső méretek: 1850 × 1600 × 2600 mm Légszállítás: 3000 m³/h Motor: kb. 1,5 kW Szűrőpatronok: 2 db, automatikus tisztítással Légsebesség: 0,2–0,5 m/s Bljdpfjygg Rnex Acmjh Maximális akasztható méret: 250 × 1000 mm Permetező nyílás: 1100 × 1100 mm Tartozékok: Elszívó szellőztető hangtompítóval Sűrítettlevegős előkészítő egység Automatikus szűrőtisztító rendszer Porvisszanyerő tartály EU szabvány szerinti vezérlőszekrény Állapot: jó műszaki állapotú, rendszeresen karbantartott 3️⃣ Ipari gyalogbejárós porbeégető kemence Belső méret: 1300 × 1300 × 2200 mm Üzemi hőmérséklet: 180–200°C Jellemző beégetési idő: 15–25 perc Fűtőteljesítmény: 2 × 12 kW (elektromos) Keringtetett levegő: 1250 m³/h Elvezetett levegő: 100 m³/h Motor teljesítmény: kb. 1,5 kW Szigetelés vastagság: 150 mm Gyártási év: 2013 Tartozékok: Hőszigetelt kamra ajtóval Levegőkeringető ventilátorrendszer Fűtőelemek Túlmelegedés elleni védelem Légáram-érzékelő EU vezérlőszekrény Acél vázkeret Állapot: kiváló működő állapotban, teljes dokumentációval Általános információk Rendszer típusa: porfestő vonal Állapot: nagyon jó Gyártási év: 2013 Dokumentáció: elérhető Működési állapot: teljesen működőképes Elérhetőség: azonnal elérhető Ár 💰 19 900 EUR (teljes rendszer) Helyszín Magyarország – EU Ideális: fémmegmunkáló műhelyek, kis porfestő üzemek, ipari karbantartó műhelyek, bérbeadó porfestő szolgáltatók részére.

Stanje: rabljeno, Leto izdelave: 2018, Wagnerjeva namestitev za elektrostatično prašno emajliranje, leto 2018, serijska številka 30210, s krmilno ploščo na dotik, sestavljena iz: • 1 PVC kabine z merami dolžina x širina x višina 3200 x 2130 x 4000 mm • Dimenzije vhodnega/izhodnega odprtina za obdelovanec: 1000 x 1000 mm • 1 HERDING filter (ciklon) z avtomatskim vračanjem prahu • 1 stresalnika za obešala z odsesovanjem in vračanjem prahu • 1 EP dozator s 32 črpalkami (injektorji) • 12 avtomatskih pršilnih pištol model PEA-C2 za nanašanje emajla, z dvojno lopatasto glavo • 9 univerzalnih krmilnih naprav EPG/S2 za prašne pištole • 1 GCA enota za obdelavo stisnjenega zraka (ogrevanje/vlaženje), ki se uporablja v instalaciji Bedpfxey Tn Atj Acmslh • 1 viseči enotirni transportni sistem dolžine 35 m, ki oskrbuje kabino. Linija se nahaja v matičnem podjetju v Italiji, v bližini kraja Pordenone. Možnost neposrednega stika po predhodnem dogovoru.

Stanje: rabljeno, Komplet pribora za lakiranje iz likvidacije podjetja Likvidacija avtokaroserijske lakirnice z različnimi pripomočki za lakiranje in delavnico. Vidno med drugim: Lakirski kozli Karoserijski kozli Nosilci za odbijače Stojala za lakiranje Barvne kartuše Materiali za lakiranje Delavniški vozički Hidravlični dvigala Drobni deli in pribor Različna držala Bedjy Tyykepfx Acmolh Pripomočki za lakiranje Lakirna kabina / lakirni sistem ni del ponudbe. Stanje: Rabljeno Cene in artikli na zahtevo.

Stanje: rabljeno, Leto izdelave: 2007, Professional combined painting and drying system with partition wall by Sehon, featuring large cabin capacity and PLC control system. Bjdoy Tiaaopfx Acmolh Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Internal cabin dimensions: 14,000 x 5,000 x 4,400 mm External cabin height: approx. 4,900 mm Entry/exit doors: 2 units, front and rear Door opening: 4,000 mm high x 4,500 mm wide Door construction: insulated steel sandwich design Door leaf thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control system: Siemens C7 PLC control Operation: soft-touch panel with touch display Operating modes: Painting, Drying, Manual, Timed operation Temperature control: continuously variable, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint mist separation mat Operating hours counter: integrated Alarm notifications: optical and acoustic Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 volts Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Volume flow adjustment: adjustable motor slide Filter system: bag filters on sliding rails Pre-filter quality class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above finished floor level Exhaust air duct height: approx. 10 m above finished floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: stainless steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner version: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety features: safety and overrun thermostat Cabin construction: heat and sound insulated Condition: used Additional painting equipment available on request. System currently in operation, available from June 2026.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, širina papirja (min.): 2.100 mm, največja višina papirja: 120 mm, skupna dolžina: 3.300 mm, skupna širina: 3.500 mm, skupna višina: 2.100 mm, Bürkle LFC 2100 Liquid Coating System Item: For liquid sealing of digitally printed media. Suitable for the application of primers or protective coatings, as well as for full-surface finishing of digitally printed media in a continuous process using solvent-free UV coatings and direct curing with overhead UV radiation. Condition: As new (purchased in 2023) Availability: Immediately Bodsy Szwujpfx Acmslh Brief Description For sale is a high-performance coating system from Bürkle, model LFC 2100. The machine was sourced in 2023 through Welte and has only been operated for a few hours since then. It is in excellent optical and technical condition (demonstration state) and offers a premium solution for UV finishing of large-format prints. The machine also includes a cleaning/washing unit with extraction as well as a second roller (smoothing roller). Technical Data & Highlights - Maximum working width: 2,100 mm - Substrate thickness: Flexibly adjustable up to 80 mm - Conveying speed: Infinitely adjustable (up to 25 m/min) - Drying: Includes powerful UV drying unit (TRUV) for immediate downstream processing - Controls: Modern operator panel for precise process control Asking Price €150,000 (negotiable) plus VAT | ex works Contact & Inspection The system is still assembled and can be inspected and tested under power by prior appointment. (Location: St. Martin bei Lofer, Austria)

Leto izdelave: 2018, stanje: rabljeno, Year of manufacture refers to the final acceptance of the system; individual components may vary in age. Workpiece dimensions up to max. LxWxH: 8,000 x 2,000 x 2,000 mm. Maximum crossbar load: 2,000 kg/trolley. Material: Steel. Pos. 1: Washing cabin, Jumbo-Clean, with stainless steel interior for degreasing/phosphating of steel by automatic system or manual lance; Bsdpfey T Nzdox Acmslh Pos. 2: 1 set of band filters; Pos. 3: 1 automatic spray ring for the Jumbo-Clean washing cabin including central lance; Pos. 4: 1 fresh water treatment system; Pos. 5: 1 manual push track with 1 electric transverse transfer platform; Pos. 6: 1 lifting/lowering station Jumbo-Lift 2000 integrated into the transverse transfer platform; Pos. 7: 1 adhesion water/powder dryer/wet paint dryer, indirectly gas-heated, door opening WxH: 2,800 x 3,100 mm, clear length: 9,500 mm, overall WxHxL approx.: 4,000/5,000/10,000 mm; Pos. 8: 1 face-side powder extraction system for on-site paint booth for spraying and drying operation; Pos. 9: 1 manual coating device OptiFlex(R)2; Pos. 10: 1 supporting structure for on-site steel structure; Pos. 11: Control cabinet.

Stanje: rabljeno, Leto izdelave: 1995, Konstantni stroj - kombinirana postaja, krtača za prah - naprava za merjenje debeline - elektronska posamezna brusna čevelj MCS sistem Weber 32 mm - utorni jekleni kalibrirni valj - izpihovanje traku - vakuumska preproga. Širina brušenja: 1100 mm. Pogon: 15 kW. Podajanje ca. 1,1 kW. Nastavitev višine 0,25 kW. Dimenzije brusilnega traku: 1150 x 2500 mm. Maksimalna debelina obdelovanca: 150 mm. Širina stroja: 1700 mm. Dolžina stroja: 2000 mm. Višina stroja: 2160 + 150 mm. Teža stroja: 1900 kg. Konstantna delovna višina: 850 mm. Priklop za odsesavanje: trak 180 mm / krtača 120 mm. Količina sesalnega zraka: 0,74 m³/s. Priključna moč: 23 kW. Priključek za stisnjen zrak: 7 bar. Hitrost podajanja: 3–15 m/min. Delovnih ur: 7000 h. Bsdpfx Acox Twcpsmjlh Lokacija skladišča: Nattheim

Stanje: rabljeno, Leto izdelave: 2011, Technical Details: Minimum temperature: 1 °C Maximum temperature: 199 °C Electrical specification – Voltage/Frequency: 380 / 50 V/Hz Heating capacity: 1.8 kW (1800 Watts) Protection class: IP 54 Total power requirement: 16.2 kW Machine weight approx.: 0.93 t Dimensions (L x W x H): 2.85 x 2.0 x 1.4 m Pre-polymerization Tunnel – Heat Treatment Tunnel Application: Drying for washing and painting lines – continuous operation Sold as is and as described! Bedpfxou Nw E Ue Acmolh Additional features: - Manufacturer's recommended maximum temperature: 80°C; safety setting: 90°C; heater: 230V - With chain conveyor/feeder line made of Teflon - Chain width: 200 mm - Maximum workpiece width: 150 mm Pass-through (W x H): 150 x 110 mm, conveyor height: 600 mm; drive: SEW Eurodrive motor (gear motor) output 0.18 kW Loading opening (W x H): 500 x 800 mm Discharge door (W x H): 600 x 1200 mm Access door (W x H): 800 x 980 mm with safety interlock Interior height: 1400 mm

Leto izdelave: 2014, stanje: rabljeno, Rabljena linija za prašno lakiranje. Zaustavljena leta 2024. Bedpfovxrm Ujx Acmelh - Mešalnik za posode Mixaco, tip CM1000-MT, s 4 x inox rezervoar 800 litrov, letnik 2014 - Ekstruder Coperion, ZSK 43 MV, letnik 2014 - SBS hladilni transporter, širina 800 mm x dolžina 5000 mm - Mlin Hosokawa Alpine, tip ACM40 EC CL, letnik 2014 - Dozirna naprava Gericke, tip GL D 7, letnik 2014 - Naprava za podajanje Hosokawa, letnik 2014 - Tlačni filter Hosokawa Alpine, letnik 2014 - Inox ciklon, premer 500 mm - 2x rotirno sito AZO, tip E 240 - Žepni filter s 45 kW električnim motorjem - Hladilna enota Climaveneta, tip NX/K 0914P - Hladilna enota Climaveneta, tip NX/K 0552P

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Tensión de conexión: 380 V, potencia conectada: 7,5 kVA, consumo energético específico 2 kW/m² Ensayos de intemperismo UV global con espectro global [similar al arco de xenón], pero con lámparas fluorescentes Volumen de la cámara de prueba: 200 litros Superficie de prueba: 0,75 m² Dimensiones de la cámara de prueba (Al x An x Pr): 1100 x 800 x 250 mm Rango de temperatura sin aislamiento: -20°C a +90°C Rango de temperatura con aislamiento: +10°C a +90°C Constancia de temperatura: ±2K Rango de temperatura del punto de rocío: +5°C a +40°C Rango de humedad: aprox. 15 - 95% h.r. Humidificación de muestras con 8 boquillas pulverizadoras Bsdpfeytr Swex Acmelh El sistema utiliza fuentes de luz UV fluorescente para simular en laboratorio el espectro dañino de la radiación solar, acelerando así los efectos de envejecimiento como cambios de color, pérdida de brillo, formación de grietas, fragilización y degradación del material. Los ciclos programables de exposición UV, control de temperatura y fases opcionales de humedad y condensación reproducen y repiten de forma reproducible las cargas ambientales prácticas. Desmontaje a cargo del comprador.

Leto izdelave: 2025, stanje: novo, Cene sušilnih peči, prikazanih na fotografijah, se razlikujejo glede na velikost, konfiguracijo in dodatno opremo. 💡📏⚙️ V podjetju ROMER izdelujemo tako standardne modele kot popolnoma prilagojene rešitve, zasnovane glede na vaše tehnološke zahteve. 🏭✅ Bodjfx Nfmepfx Acmslh Sporočite nam dimenzije vaših kosov, kapaciteto linije, profil utrjevanja in razpoložljiv prostor – pripravili bomo najboljšo rešitev in možnosti, ki resnično izboljšajo vsakodnevno učinkovitost. 🔥🎯 🧠📡 Nadziranje in upravljanje Sproten nadzor procesa: temperatura, čas, pretok zraka in načini delovanja – z alarmi in shranjenimi recepti za ponovljive cikle. 🔁✅ 🔥🧩 Grelnim modul Hitro segrevanje in stabilna temperatura zahvaljujoč učinkovitim grelnim elementom in hitremu prenosu energije. ⚡🌡️ 🌀💨 Kroženje zraka Enakomerna porazdelitev zraka zmanjšuje temperaturne razlike za stalno kakovost premaza. 🎯✅ 🧱❄️ Izolacija in konstrukcija Pametna zasnova komore minimalizira toplotne izgube – hitrejše doseganje nastavljene temperature in manjša poraba energije. ♻️📉 🛡️⚠️ Varnost in certifikati Senzorji, medzaporne naprave in zaščitna logika povečajo varnost in zanesljivost delovanja. 🔒👷 ⚡💰 Visoka učinkovitost Optimiziran prenos toplote in manjše izgube pomenijo resnične prihranke pri obratovanju. 📉🔥 ⏰🤖 Samodejni zagon Programabilni urnik – samodejno predgretje pred začetkom izmene za gladek zagon proizvodnje. ⏱️✅ 🚪🔒 Samozapiralna vrata + pametni dimnik Preprečujejo nenamerno odpiranje, dimnik se vklopi le po potrebi za varnejše delovanje. 🧯✅ 🌿🔋 ECO način Nizka poraba energije v stanju pripravljenosti – do 20 % manjša poraba goriva, odvisno od procesa. 🌱📉 👀💡 Pogled in osvetlitev Pregled nad procesom brez odpiranja vrat – manjši padci temperature, lažji nadzor. ✨👁️ 🛤️🔥 Vodila + samodejna kapuca Toplotna kapuca deluje samo med nalaganjem za manjše izgube toplote, samodejno podajanje po tirnicah izboljša ergonomijo in hitrost nalaganja. 🙌⚙️ 🎛️🌡️ VEČCONSKO GRETJE Neodvisen nadzor con za enakomerno utrjevanje kosov z različno maso in obliko. 🧩✅ 🧠♨️ MTS sistem Grelniki nameščeni brez toplotnih mostov – večja učinkovitost in hitrejše dosežene nastavljene temperature. ⚡⏱️ 2-v-1 🧱↔️🧱 Razdeljena komora Premična pregrada za dve neodvisni coni – sušenje in utrjevanje v eni napravi za maksimalno prilagodljivost. 🚀🔁 🎚️🌀 VFD prezračevanje Spremenljiva hitrost ventilatorja glede na pogoje v komori – boljši nadzor in manjša poraba elektrike. ⚙️💡

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. Blsdpefz Dubjfx Acmjh - For ergonomic solutions in manual installations, we recommend suspended cross conveyors (cross transport). - In automated systems, chain conveyors are most commonly used. These run continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies producing various products simultaneously—for example, with multiple spray booths in different colors—flexible solutions with non-powered conveyors are used. This is the most expensive solution. All installations are custom-made to meet individual customer specifications. Continuous transport systems for overhead chain conveyors are designed and manufactured based on individual customer orders. In this system, floor conveyors can also be produced to carry items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Cross beams (cross transporters) are specifically designed and manufactured to suit the requirements of individual installations. Use of a photoelectric sensor The use of a photoelectric sensor in the detail area enables length measurement and, consequently, allows gun activation when the part enters its range, and immediate deactivation after painting. The photoelectric sensor is standard equipment. Identification of details by means of special markings. Above the hanger, plates with identification holes are present. Based on this, the PLC controller, in conjunction with the photoelectric sensor, identifies the painted part and activates or deactivates the guns at the precise moment—thereby saving energy and powder coating material. Vertical shape recognition. By using light barriers with horizontal detectors, the PLC control can analyze the vertical shape of a part. The PLC controller measures the time a part is expected to be inside the gun zone, allowing the guns to be turned on or off selectively. With light barriers equipped with multiple sensors horizontally and vertically. This solution enables precise measurement of workpiece dimensions and thus also allows control of manipulators.

Leto izdelave: 2020, stanje: novo, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information on Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function enables you to estimate the consumption and costs for each firing process. USB Storage Each firing process is logged, and the data can be transferred to a USB stick for evaluation on a PC. Each file is automatically generated and refers to a single firing process, recording extreme temperatures and precise timing. Files are saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this feature is free of charge. With other providers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Something not right? Too few pieces after firing? You can now check the exact parameters of each firing process, such as its duration or whether any problems occurred. New! Timer Function It is possible to preset the operating start time so that the furnace can automatically switch on before the work shift begins. Made by Professionals for Professionals Automatic Smoke Extractor The smoke extractor can be programmed to open several minutes before the end of the firing process, allowing smoke to be drawn out of the chamber. It can also be controlled directly from the touch panel. Process Duration Timer Using heating dynamics, the system calculates the process duration and displays the end time of the firing process on the display. Bedpfjfz Apqox Acmslh Self-Closing Doors To open, simply pull the door. To close, just push it—the door will close automatically. Exhaust Hood Over the Door (optional) To minimize heat loss to the hall when opening the door, an exhaust hood can be installed above the door to extract the hot air. Partition Wall (optional) The partition wall is suitable for large furnaces where only parts of the oven are to be used. The furnace is equipped with a movable partition and special controls. 2-in-1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying is done in the second chamber at the same time.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Bjdpefz A Ilsfx Acmjlh Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Bsdpfofzktzsx Acmolh Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2025, stanje: novo, Cene sušilnih peči, prikazanih na fotografijah, se razlikujejo glede na velikost, konfiguracijo in dodatno opremo. 💡📏⚙️ V podjetju ROMER izdelujemo tako standardne modele kot popolnoma prilagojene rešitve, zasnovane glede na vaše tehnološke zahteve. 🏭✅ Sporočite nam dimenzije vaših kosov, kapaciteto linije, profil utrjevanja in razpoložljiv prostor – pripravili bomo najboljšo rešitev in možnosti, ki resnično izboljšajo vsakodnevno učinkovitost. 🔥🎯 🧠📡 Nadziranje in upravljanje Sproten nadzor procesa: temperatura, čas, pretok zraka in načini delovanja – z alarmi in shranjenimi recepti za ponovljive cikle. 🔁✅ 🔥🧩 Grelnim modul Hitro segrevanje in stabilna temperatura zahvaljujoč učinkovitim grelnim elementom in hitremu prenosu energije. ⚡🌡️ 🌀💨 Kroženje zraka Enakomerna porazdelitev zraka zmanjšuje temperaturne razlike za stalno kakovost premaza. 🎯✅ 🧱❄️ Izolacija in konstrukcija Pametna zasnova komore minimalizira toplotne izgube – hitrejše doseganje nastavljene temperature in manjša poraba energije. ♻️📉 🛡️⚠️ Varnost in certifikati Senzorji, medzaporne naprave in zaščitna logika povečajo varnost in zanesljivost delovanja. 🔒👷 ⚡💰 Visoka učinkovitost Optimiziran prenos toplote in manjše izgube pomenijo resnične prihranke pri obratovanju. 📉🔥 ⏰🤖 Samodejni zagon Programabilni urnik – samodejno predgretje pred začetkom izmene za gladek zagon proizvodnje. ⏱️✅ 🚪🔒 Samozapiralna vrata + pametni dimnik Preprečujejo nenamerno odpiranje, dimnik se vklopi le po potrebi za varnejše delovanje. 🧯✅ 🌿🔋 ECO način Nizka poraba energije v stanju pripravljenosti – do 20 % manjša poraba goriva, odvisno od procesa. 🌱📉 Blsdpfsfz Nd Ijx Acmeh 👀💡 Pogled in osvetlitev Pregled nad procesom brez odpiranja vrat – manjši padci temperature, lažji nadzor. ✨👁️ 🛤️🔥 Vodila + samodejna kapuca Toplotna kapuca deluje samo med nalaganjem za manjše izgube toplote, samodejno podajanje po tirnicah izboljša ergonomijo in hitrost nalaganja. 🙌⚙️ 🎛️🌡️ VEČCONSKO GRETJE Neodvisen nadzor con za enakomerno utrjevanje kosov z različno maso in obliko. 🧩✅ 🧠♨️ MTS sistem Grelniki nameščeni brez toplotnih mostov – večja učinkovitost in hitrejše dosežene nastavljene temperature. ⚡⏱️ 2-v-1 🧱↔️🧱 Razdeljena komora Premična pregrada za dve neodvisni coni – sušenje in utrjevanje v eni napravi za maksimalno prilagodljivost. 🚀🔁 🎚️🌀 VFD prezračevanje Spremenljiva hitrost ventilatorja glede na pogoje v komori – boljši nadzor in manjša poraba elektrike. ⚙️💡

Leto izdelave: 2025, stanje: novo, Cene sušilnih peči, prikazanih na fotografijah, se razlikujejo glede na velikost, konfiguracijo in dodatno opremo. 💡📏⚙️ V podjetju ROMER izdelujemo tako standardne modele kot popolnoma prilagojene rešitve, zasnovane glede na vaše tehnološke zahteve. 🏭✅ Sporočite nam dimenzije vaših kosov, kapaciteto linije, profil utrjevanja in razpoložljiv prostor – pripravili bomo najboljšo rešitev in možnosti, ki resnično izboljšajo vsakodnevno učinkovitost. 🔥🎯 🧠📡 Nadziranje in upravljanje Sproten nadzor procesa: temperatura, čas, pretok zraka in načini delovanja – z alarmi in shranjenimi recepti za ponovljive cikle. 🔁✅ 🔥🧩 Grelnim modul Hitro segrevanje in stabilna temperatura zahvaljujoč učinkovitim grelnim elementom in hitremu prenosu energije. ⚡🌡️ 🌀💨 Kroženje zraka Enakomerna porazdelitev zraka zmanjšuje temperaturne razlike za stalno kakovost premaza. 🎯✅ 🧱❄️ Izolacija in konstrukcija Pametna zasnova komore minimalizira toplotne izgube – hitrejše doseganje nastavljene temperature in manjša poraba energije. ♻️📉 🛡️⚠️ Varnost in certifikati Senzorji, medzaporne naprave in zaščitna logika povečajo varnost in zanesljivost delovanja. 🔒👷 ⚡💰 Visoka učinkovitost Optimiziran prenos toplote in manjše izgube pomenijo resnične prihranke pri obratovanju. 📉🔥 ⏰🤖 Samodejni zagon Programabilni urnik – samodejno predgretje pred začetkom izmene za gladek zagon proizvodnje. ⏱️✅ 🚪🔒 Samozapiralna vrata + pametni dimnik Preprečujejo nenamerno odpiranje, dimnik se vklopi le po potrebi za varnejše delovanje. 🧯✅ 🌿🔋 ECO način Nizka poraba energije v stanju pripravljenosti – do 20 % manjša poraba goriva, odvisno od procesa. 🌱📉 👀💡 Pogled in osvetlitev Pregled nad procesom brez odpiranja vrat – manjši padci temperature, lažji nadzor. ✨👁️ 🛤️🔥 Vodila + samodejna kapuca Toplotna kapuca deluje samo med nalaganjem za manjše izgube toplote, samodejno podajanje po tirnicah izboljša ergonomijo in hitrost nalaganja. 🙌⚙️ Bsdpfjfzb Rcex Acmolh 🎛️🌡️ VEČCONSKO GRETJE Neodvisen nadzor con za enakomerno utrjevanje kosov z različno maso in obliko. 🧩✅ 🧠♨️ MTS sistem Grelniki nameščeni brez toplotnih mostov – večja učinkovitost in hitrejše dosežene nastavljene temperature. ⚡⏱️ 2-v-1 🧱↔️🧱 Razdeljena komora Premična pregrada za dve neodvisni coni – sušenje in utrjevanje v eni napravi za maksimalno prilagodljivost. 🚀🔁 🎚️🌀 VFD prezračevanje Spremenljiva hitrost ventilatorja glede na pogoje v komori – boljši nadzor in manjša poraba elektrike. ⚙️💡

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can either be operated on the floor or suspended from rails. - For convenient solutions in manual systems, we recommend overhead cross-transfer systems (transverse conveyors). Bodpfx Acefz Dt Nomjlh - In automated systems, chain conveyors are most commonly used. These operate continuously and present an excellent solution for companies focused on process quality and repeatability. - For companies producing various items simultaneously or operating multiple booths with different colours, flexible solutions utilising non-powered conveyors are employed. This is the most expensive solution. All systems are custom-built according to customer specifications. Continuous hanging chain conveyor systems are designed and manufactured to individual client orders. In this system, it is also possible to implement floor conveyor systems to transport items such as flowerpots or wheels (see photo). ROMER also manufactures suspended transport systems. Cross-traverses (cross transporters) are specifically designed and manufactured for unique installation requirements. Use of a photocell Integrating a photocell in the detail area allows for length measurement and permits the guns to be activated as the part enters their range, and switched off immediately after coating to save energy and powder. The photocell is included as standard. Details can be identified using special markers. Above the hanger, plates with identification holes are installed. Based on this, the PLC controller, together with the photocell, recognises the coated part and switches the guns on and off at precisely the right time—saving energy and powder. Vertical shape detection. By using light barriers with horizontal detectors, the PLC can analyse the vertical profile of a part. The PLC also controls the dwell time of the part in the gun chamber, allowing for selective activation and deactivation of the guns. Light barriers with multiple sensors, both horizontally and vertically, are also available. This facilitates precise measurement of workpiece dimensions, enabling manipulator operation as well.

Leto izdelave: 2020, stanje: novo, Transportni sistemi Glede na zahteve kupca se lahko transportni sistemi premikajo po tleh ali visijo na stebrih. - Za udobne rešitve za ročne vgradnje priporočamo viseče nosilce (prečni transport). - Za avtomatizirane sisteme se najpogosteje uporabljajo verižni transporterji, ki se ne ustavijo in so odlična rešitev za podjetja, ki se osredotočajo na kakovost in ponovljivost postopka. - Za podjetja, ki hkrati izdelujejo različne predmete in imajo na primer več kabin z različnimi barvami, se uporabljajo prožne rešitve z uporabo brezžičnega transportnega traku. To je najdražja rešitev. Vse inštalacije so narejene po meri, odvisno od zahtev kupca, Sistemi verižnih transportnih vzmetenja - neprekinjeni, so zasnovani in izdelani po naročilu kupca. Bodpfxofz I D Dj Acmelh V tem sistemu je mogoče izdelati tudi spodnje transportne sisteme, na katerih so nameščeni detajli, na primer cvetlični lonci, platišča (fotografija). Podjetje ROMER se ukvarja tudi s proizvodnjo visečih transportnih sistemov. Križni traverzi (križni transporti) so zasnovani in izdelani za posebne naprave Uporaba ene fotocelice Uporaba ene fotocelice v prostoru detajla vam omogoča, da izmerite njegovo dolžino in tako omogočite vklop pištol, ko se detajli pojavijo v njihovem dosegu, in izklop pištol takoj po barvanju detajla. Fotocelica je standardna oprema. Identifikacija podrobnosti s posebnimi markerji. Nad zanko obdelovanca so plošče z identifikacijskimi luknjami. Na njihovi osnovi krmilnik PLC v povezavi s fotocelico prepozna naslikane detajle, ob ustreznem času vklopi in izklopi pištolo - s tem prihrani energijo in prašno lakiranje. Vertikalno zaznavanje oblike dela. Uporaba svetlobnih vrat z detektorji vodoravno omogoča krmilniku PLC, da analizira navpično obliko detajla. Krmilnik PLC šteje čas, v katerem naj se podrobnosti pojavijo v prostoru pištole - zahvaljujoč temu je možno selektivno vklopiti ali izklopiti puško. Uporaba svetlobnih vrat z več senzorji vodoravno in navpično. Ta rešitev omogoča natančno merjenje dimenzij detajla, zahvaljujoč temu pa je mogoče tudi krmiljenje manipulatorjev.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on the customer's requirements, transport systems can either be moved on the floor or suspended from rails. - For user-friendly solutions in manual installations, we recommend suspended cross transfers (transverse transport). - In automated systems, chain conveyors are most commonly used. They operate continuously without stopping and offer an excellent solution for companies focusing on process quality and repeatability. Blodsfz I Edjpfx Acmjh - For companies manufacturing a variety of items simultaneously, such as with multiple booths in different colors, flexible solutions using non-powered conveyors are utilized. This is the most expensive solution. All installations are custom-built according to customer specifications. Continuous transport systems for suspended chains are designed and manufactured based on individual customer orders. In this system, it is also possible to implement floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Cross beams (cross-transfer units) are designed and manufactured to meet the specific requirements of individual installations. Use of a Photoelectric Sensor The use of a photoelectric sensor in the item area allows for length measurement and thus enables the spray guns to be activated when the item enters their range, and switched off immediately after coating. The photoelectric sensor is a standard feature. Identification of items by means of special markers. Above each sling, there are plates with identification holes. Based on this, the PLC controller, in combination with the photoelectric sensor, detects the coated item and activates or deactivates the guns at the correct moment—saving both energy and powder coating material. Vertical shape recognition. By using light barriers with horizontal detectors, the PLC control can analyze the vertical shape of an item. The PLC controller tracks the time the item should appear within the gun zone—enabling selective activation or deactivation of the spray guns. With light barriers featuring multiple horizontal and vertical sensors. This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. Bodjfz I Ehspfx Acmolh We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.