4 Rabljeni Fermentacijski Tuneli nakup rabljenega (60.370)

Stanje: zelo dobro (rabljeno), 4 fermentacijski tuneli sestavljeni iz: - Serijska št.: 930 fermentacijskih tunelov - Tip komore: BFC - Dimenzije vozička: 600x800 - Število vozičkov na tunel: 6 - Zunanja širina komore: 4.330 mm - Zunanja globina komore: 5.350 mm - Uporabna globina komore: 5.200 mm - Uporabna širina celice: 1.000 mm - Tip vratnega okvirja: enokrilna vrata 1.000 mm - Stran uparjalnika: desna - Nadzor OPTICOM - Električni priklop BFC: 400-440V / 3F + N + PE / 50-60Hz - Tip tunelske komore: Da Bdodpfewxymhox Agtsb

Stanje: rabljeno, Leto izdelave: 1992, Overview These four isobaric pressure tanks (each with a capacity of 20,000 liters) were manufactured in 1992 by TMCI Padovan, originate from the wine industry, and were previously used for sparkling wine production. Featuring full-surface cooling jackets and a nominal pressure rating of up to 6 bar, the tanks are suitable for the fermentation, maturation, and storage of carbonated beverages including beer, sparkling wine, and related products. The tanks are constructed from carbon steel and feature an internal food-grade epoxy coating—a technology widely used prior to stainless steel becoming the industry standard. They represent a cost-effective alternative to stainless steel tanks, particularly for producers seeking lower investment costs. Each tank is fully insulated and equipped with a complete cooling jacket, enabling temperature-controlled processes. Due to the coating system, regular inspections and renewal of the epoxy lining are required depending on utilization and product type. Technical data: Manufacturer: TMCI Padovan Year of manufacture: 1992 Quantity: 4 units Type: Isobaric pressure tank with full cooling jacket Application: Fermentation, maturation, and storage of carbonated beverages Capacity: 20,000 liters (200 hl) per tank Material: - Shell: Carbon steel - Internal lining: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Pressure rating: 6 bar Dimensions (per tank): - External diameter: approx. 2,200 mm - Cylindrical height: approx. 7,000 mm Bdodpfsy Hkl Dex Agtjb - Total height: approx. 9,000 mm

Stanje: dober (rabljeno), Modular za agregate, agregat za obdelavo formatov, agregat za odrezovanje, rezkalni agregat, profilni rezkalni agregat, dodajalni rezkalni agregat, čelni agregat, dvostranski profilirni stroj, stroj za obdelavo robov, motor za zarezovanje, motor za odrezovanje, rezkalni motor za stroj za obdelavo robov, finišni agregat, polirni agregat -Proizvajalec: Homag, 2 rezkalna agregata in 2 polirna agregata iz stroja za enostransko lepljenje robov BRANDT KS 25 -Polirni agregati: Motor KMER 0,18 kW 1360 obr/min -Polirna rola: Ø 145 mm, višina in globina nastavljiva / nihajna Bdodpex Hyzhjfx Agtsb -Rezkalna agregata: Motor Perske / Homag, glej slike za tipe -Napetost: 220 V / 200 Hz -Cena/oddaja: kompletno -Dimenzije skupno: 1200/800/V590 mm -Skupna teža: 175 kg

Stanje: zelo dobro (rabljeno), -Velikost kuhalne komore: 850x2000 mm -S škarjastim nakladalcem Bedpowxx Nbofx Agtedb -Gorilnik Cuenod C10 -Obnovljena oprema: oprema se pripravi po naročilu, datumi prevzema/vračila se dogovorijo ob naročilu (ceno prosimo povprašajte po obnovi)

Stanje: rabljeno, Leto izdelave: 2016, Used machine Year of manufacture: 2016 Features and technical data: - Electrical system: 3x400V 50/60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely adjustable extraction hood – motorized control - Full rated power available at approx. 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotation direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Max. saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tooling) with digital drives (double-sided drive). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box-section steel. Internal ribbing ensures high rigidity. - Working area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working envelope: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (see layout). - Double-sided driven gantry portal - X-axis guide system: The portal drive for the X-axis is via a helical, crowned rack and pinion – this ensures maximum precision. The reduction gear guarantees excellent machining quality and repeat accuracy. The bearing arrangement uses encapsulated recirculating ball carriages running on hardened and ground linear guides. - Y-axis guide system: The bearing arrangement uses encapsulated recirculating ball carriages running on hardened and ground linear guides. The Y-axis is positioned via a ground recirculating ball screw. - Z-axis guide system: The bearing arrangement uses encapsulated recirculating ball carriages running on hardened and ground linear guides. The Z-axis is positioned via a ground recirculating ball screw. - Automatic central lubrication: Lubricant is precisely delivered to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws in Y and Z. Lubrication is carried out automatically at set intervals. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimum tool changing times and ample storage for milling tools. One aggregate station (see layout for possible configurations) Max. tool diameter: 250 mm Max. tool length: 240 mm Bodoy Ih Rgepfx Agtsdb - Drilling head DH 18 6H 1S: Vertical: 12 spindles (7 in X-direction, 5 in Y-direction) Horizontal: 6 spindles (4 in X-direction, 2 in Y-direction) Stroke = 70 mm Max. drill bit length = 70 mm, shank diameter = 10 mm All spindles individually driven and selectable 1 slot saw in X-direction Max. saw blade diameter 120 mm

Stanje: rabljeno, Leto izdelave: 2016, Delovno polje: X=3300 mm Y=1280 mm Z=150 mm Višina prehoda Upravljalni terminal: 24" barvni LED zaslon Ročni terminal za upravljanje hitrosti osi Programska oprema: "Woodflash" Vakuumska črpalka 90 m³/h/50 Hz oziroma 108 m³/h/60 Hz Rezkalno vreteno 12 kW HSK F63 (12.000 vrt./min) 12-pozicijski linearni menjalec orodja na levi strani stroja + pick-up prostor Vrtalna glava DH 16 4H 2S: 12 navpičnih vreten 4 vodoravna vretena 2 utorni žagi Lokacija skladišča: Nattheim Bdjdpfx Ajxy Tlwogtsb

Stanje: rabljeno, Leto izdelave: 2014, Použit stroj Leto izdelave: 2014 Oprema in tehnični podatki: - Delovno območje X: 3.740 mm - Delovno območje Y: 1.570 mm - Delovno območje Z: 350 mm - 4. os: prisotna - 5. os: 5-osno vreteno, motor 12 kW - z dodatno blokado C-osi - Mesta za menjavo orodja: 24 s ploščnim menjalcem; 10 na levi strani stroja - Vertikalna vrtalna vretena: 12 - Strojna miza: konzolna miza - Avtomatika pozicioniranja mize: prisotna - 6 delovnih podpor tipa e-motion - Poseben sistem vpenjanja za okvirje - Programska oprema: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 delovni polji za nihajno obdelavo - z avtomatskim centralnim mazalnim sistemom - z mobilnim upravljalnim pultom in PC monitorjem - s klimatsko napravo za elektro omaro - z vakuumsko črpalko 90 m³/h - z ročnim upravljalnikom - Vključeno: 12 vpenjal za okvirje, 8 velikih in 4 srednje vakuumske priseske Razpoložljivost: takoj Bdedpfx Agox Hllxjtob Lokacija: Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: NR: 220.10.029.19, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj visokokakovostni robni lepilni stroj Format4 Tempora 60.06 EL – takoj pripravljen za delo! Dvignite svojo proizvodnjo na višjo raven s tem malo rabljenim robnim lepilnim strojem Format4 Tempora 60.06 EL v odličnem stanju. Stroj je zasnovan za industrijsko uporabo in zagotavlja izjemno natančnost ter popolno površino vsake plošče. - Visokonatančno avtomatsko lepljenje robov - Enota za predrezkanje za popolno pripravo roba - Zanesljiv in konstanten sistem lepljenja - Popolna obdelava: porezovanje, rezkanje, poliranje - Enostavno upravljanje in zanesljivo delovanje Vključene dodatne opreme: - Rdeč zračni rezervoar (kot je prikazano na fotografijah) - Dodatni ogrevani posoda za lepilo – idealna za hitro menjavo različnih barv lepila Stroj je skrbno vzdrževan, zelo malo rabljen in popolnoma operativen – pripravljen za neposredno uporabo v proizvodnji. Bodjy Dg N Tepfx Agtodb Stroj je na voljo zaradi reorganizacije obrata. Za več podrobnosti ali ogled nas kontaktirajte.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth Bsdpfed Tbbdox Agtjdb - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Bdodpfx Aofdkb Tsgtob Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing Bdsdod Tqalepfx Agtob - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Bdedpfjfdkb Usx Agtob Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Bdedpfx Agsguk A Hoteb Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg Bodpfx Ajfdkbhjgtodb - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm Bdodpfjguk Dkjx Agtjb - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm Bedpoguk Dvefx Agtodb - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 9.150 kg, nosilnost na odsek shranjevanja: 3.050 kg, skupna dolžina: 22.800 mm, skupna višina: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 22.800 mm, 4 dvopolna paletna regala (M35112711-3) vsak 5,7 m dolg, 3,5 m visok, 1,1 m globok, vsak s 2 polji, širokimi 2,7 m, vsak s 3 nivoji prečk, nosilnost na polje 3000 kg. - 12 okvirjev (RM3511 - RAL5019) - 24 talnih plošč, podlag, pritrdilni material - 48 talnih sider (ZZBA1210) - 48 posameznih prečk (T2711 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so vijačeni, ne predmontirani Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže Bdjdoyz Iccjpfx Agtjb - razklad tovornjaka izvaja kupec z lastno dvižno opremo - dobave po celotni Nemčiji, razen otokov! Dobave v EU države po individualnem dogovoru.

Stanje: zelo dobro (rabljeno), Edgebander FORMAT 4 Tempora 60.06 glueBox - used Touchscreen Swiveling control panel Program memory Automatic pressure bridge adjustment Feed via transport chain Extendable workpiece support Diamond jointers for both climb and counter-rotation Glue pot located at the bottom Quick-change glue pot system Suitable for PUR adhesives GLUEBOX system Pressure unit with powered roller Cut-off saw with 2 high-frequency motors Cut-off saw, pneumatically tiltable Flush / radius milling unit Motorized positioning control for milling unit Bsdpfxeu R S Nwo Agtedb x-motion PLUS Corner rounding unit with diamond-coated cutters Radius scraper blade Radius scraper blade with motorized positioning Flat scraper blade Workpiece-activated flat scraper blade Infeed lock Spraying unit for release agent Spraying unit for lubricant Spraying unit for cleaning agent Year of manufacture: 2022 ----- Technical Specifications ----- Edging thickness, coil material: 0.4 - 3 mm Edging thickness, strip material: 3 - 6 mm Workpiece thickness: 8 - 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen diagonal: 15 inches Jointers dimensions: D 80 x 64 mm Jointers power: 1.1 kW Cut-off saw power: 0.35 kW Milling station power: 0.75 kW Extraction port diameter: 80 + 160 mm Compressed air connection: 7 - 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality Info: - All settings checked - Adjusted to manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Immediately ready for operation

Stanje: dober (rabljeno), 4-postajni knjižnovezni stiskalnik za lepljenje blokov MURO 4 x 5000 A4/HAD Trdna konstrukcija, vodoodporna plošča in pocinkane komponente. Stroj je v brezhibnem stanju. Tehnične specifikacije: Format: 350x320x550 (Š/G/V) Število postaj: 4 Napajanje: 230V Maksimalna poraba moči: 4kW Bedpfxoy Ehnas Agtedb Teža: 102kg Visoka vpenjalna sila, vztrajnika z udobnim oprijemom. Električno sušenje z dvema stopnjama moči: 2 in 4kW Vsak stiskalnik je mogoče nagniti do 45′ Konstrukcija je na kolesih za lažje premikanje.

Stanje: dober (rabljeno), GUK FA 49/4 zgibalni stroj + GUK FA 49/4 prečni zgibalni modul Stroj je v zelo dobrem tehničnem in vizualnem stanju. Format: 490x690 mm. Hitrost zgibanja: 30–160 m/min Oprema: 4 vzporedne kasete na glavni enoti Bdedey Ehk Ijpfx Agtsb 4 pravokotne kasete na prečni zgibalni enoti Prva kaseta podaljšana. Prilagoditve kasete so na številčnici. Gladko nastavljiva hitrost. Števec z možnostjo porcij in prikazom hitrosti zgibanja. Rietschle kompresor. Orodni valj z veliko število pripomočkov za perforacijo, biganje in rezanje. Povišani pokrovi za zvočno izolacijo. Podajanje s pomočjo vakuuma. Mobilni izhod (prosto stoječa izhodna enota) z gladkim upravljanjem hitrosti. Popolna dokumentacija. Obsežen nabor dodatne opreme.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo 4 kose turbin Schlick - 320 mm, vključno z motorji 7,5 kW. Turbine iz Schlick ROTO-JET RB500 5.2/4/7,5. Tip turbin - 5.2. Količina abraziva - 140 kg/min. Hitrost abraziva na izhodu - 70 m/s. Turbine po generalni obnovi. Stroji za peskanje, peskalniki. Cena za 1 kos - 3000 EUR. Bdedpjvphf Usfx Agteb

Stanje: dober (rabljeno), Leto izdelave: 2005, skupna dolžina: 4.200 mm, skupna širina: 2.500 mm, skupna višina: 1.800 mm, višina izdelka (maks.): 4 mm, skupna masa: 7.000 kg, Shearing capacity 4 mm, cutting length 3050 mm, throat depth 350 mm, motor 18.5 kW, motorised backgauge, support arms with scale, cutting line illumination, foot pedal, pneumatic sheet holders, new IMEX PLC control, dimensions 420x250x180 cm, approx. 6500 kg Bedpfstp I S Ajx Agtodb

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 34.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, prostor za palete: 108 evropske palete, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 4 rows of pallet racking (4 x M35112711-2) - Each 8.5 m long, 3.5 m high, 1.1 m deep - Each with 3 bays, 2.7 m wide - Each with 2 beam levels, compartment load capacity 3,000 kg Included: - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, fastening material - 64 floor anchors (ZZBA1210) - 48 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Bodev Ukz Aopfx Agtodb Freight / Delivery: - Max. 20 working days after receipt of payment - Delivery free to site / installation location - Unloading from the truck is the purchaser’s responsibility using their own forklift equipment - Deliveries are made throughout Germany (mainland only, excluding islands) - Deliveries to EU countries by individual arrangement

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, skupna dolžina: 71.000 mm, skupna višina: 4.000 mm, razmak između stupova: 2.700 mm, višina police: 4.000 mm, število vrst polic: 7, nosilnost: 6.000 kg, višina okvirja: 4.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, Paletni regalni sistem 4 m visok, na polje 2 prečkinski ravni (svetlina 2700) Obseg: 32 okvirjev 4 m visokih 128 talnih sider 18 zaščitnih kotov proti naletom 100 prečk dolžine 2,7 m, višina 0,11 m 150 mrežastih polic 89/110, nosilnost 1000 kg 7 tablic z nosilnostjo Dobava na gradbišče brezplačno Okviri privijačeni, ne predmontirani Bjdpjyyny Ejfx Agtsdb Prevoz / Dobava: - največ 20 delovnih dni po prejemu plačila - dobava brezplačno na gradbišče / mesto montaže - raztovarjanje s tovornjaka opravi kupec z lastno dvižno napravo - Dobave se izvajajo po celotnem območju Zvezne republike Nemčije, razen otokov! Dobave v države EU po individualnem dogovoru.