Wanner Technik D25.38 nakup rabljenega (6.503)

Stanje: rabljeno, Mešalnik plinov / vmesna postaja, Witt-Gasetechnik MG50-2ME Pv-Dü, rabljeni stroj Proizvajalec: Witt-Gasetechnik Tip: MG50-2ME Pv-Dü Leto izdelave: 2017 Tehnične specifikacije: Vrsta plina: CO2 / zrak Obratovalni tlak: 8 bar Prostornina rezervoarja: 100 litrov Največji tlak rezervoarja: 10 bar Električni podatki: 230V, 50 Hz Dimenzije: Širina: 1000 mm Globina: 660 mm Ppodpfx Aeyz Tlcsgxor Višina: 920 mm Natančno mešanje: Visoko natančno mešanje CO2 in zraka po načelu "Pv-Dü" (proporcionalni ventil-šoba). Integriran vmesnik: Opremljen s 100-litrskim tlačnim rezervoarjem za stabilen pretok plina. Uporaba: Idealno za konzerviranje hrane, obogatitev rastlinjakov s CO2 v kmetijstvu ali uporabo v industrijskih laboratorijih.

Stanje: zelo dobro (rabljeno), Servatechnik odsesavanje Podpfox Nbnnsx Agxjpr

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop device with a small working area, ideally suited for small parts. Thanks to its compact design, the unit is highly practical and can be used anywhere. The device is very easy to operate without any programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created and marked with just a few clicks and minimal programming knowledge. The software automatically increments serial and article numbers after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. A laptop with Windows operating system and laser software is included as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 20 watt (optional: 30 watt, 50 watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English Ppedpfey Emthsx Agxer - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-trap safety stop - Optional: extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, vrsta hlajenja: zrak, skupna masa: 120 kg, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, potrebna širina: 1.550 mm, potrebna višina: 2.050 mm, valovna dolžina laserja: 1.064 nm, vhodna frekvenca: 50 Hz, The universally applicable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent markings, the use of a laser is indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos in just a few clicks, without advanced programming knowledge. The software can automatically increment serial and article numbers after initial setup. Furthermore, the software is capable of reading data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transferring it to predefined fields. The use of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optional larger) • Signal light to indicate operating status • Optional: rotary axis (3-jaw chuck) • Optional: fume extraction (including activated carbon filter) • Optional: digital height measuring system • Optional: autofocus system for automatic focus distance determination • Optional: extension arms for large components (one-sided, double-sided) • Marking software EZCAD in German / English Ppodpoxd Az Nsfx Agxsr • Pilot laser (simple preview, plain text preview) • Focus finder (easy focus adjustment) • Max. part height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Monitor and keyboard tray with adjustable height • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / door height (pass-through): approx. 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount approx. 1500 x 800 x 1900mm (LxWxH) • Weight: approx. 120 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop device with a small working area, ideally suited for small components. Due to its compact design, the system is highly practical and can be used anywhere. The device is very easy to operate even without programming skills. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optionally: 20 watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm Psdpfx Aewkpxkogxspr - Weight: approx. 45 kg

Stanje: pripravljen za uporabo (rabljen), Na voljo je obojestranski vrtalni stroj za steklo Schraml (Lisec-Group). Nagib stekla: 8°, maks. višina obdelave: 1300 mm, maks. dolžina stekla: 2500 mm, maks. debelina stekla: 40 mm, maks. premer vrtanja: 100 mm, število vrtljajev: 5000/min, mere stroja X/Y/Z: pribl. 3000 mm/900 mm/2000 mm, teža: pribl. 1500 kg. Ogled na lokaciji je mogoč. Podjy H I Ezjpfx Agxepr

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, različni rabljeni Richterregerji na zalogi vsi so bili preverjeni glede delovanja Znamke: Schenck, Siebtechnik, Joest Pedpfx Agexywqkexjpr

Stanje: rabljeno, Dimensions: 800 x 750 x 1975 mm Washing chamber: 500 x 650 x 625 mm Psdpfx Ageb Tffgsxspr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, C-okvirna stiskalnica za clinch tehnologijo Tlačna sila 4,8 t Zračni tlak 6 bar Skupni hod 32 mm Sila hod 3 mm Pjdjy Ey Hzjpfx Agxspr Brez orodij

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used, among others, in: • quality control (QC) • end-of-line production testing • OEM laboratory and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment Ppsdpjyc H N Nofx Agxjr • Last ETL factory calibration: 05/2023 • Weight: 38 kg ⸻ Included equipment / scope of delivery • Main unit ATS 400 X8 with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test cables and accessories (see photos) • Manufacturer documentation • Original markings, nameplates, CE certified ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • Ready for immediate use in a production environment • No signs of tampering, all connectors and interfaces complete

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, številka stroja/vozila: 17060002, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 32 h, moč: 1,1 kW (1,50 KM), vhodna napetost: 380 V, vhodni tok: 3 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, vrsta nastavitve višine: mehanski, vrsta aktuacije: pnevmatičen, skupna širina: 600 mm, skupna dolžina: 700 mm, skupna višina: 1.450 mm, širina mize: 300 mm, dolžina mize: 600 mm, skupna masa: 75 kg, obratovalni tlak: 3 letvica, Oprema: CE označba, dokumentacija / priročnik, Maszyna do nawiercania zawiasów Eco-Press Vario jak nowa! Producent: Verarbeitungstechnik Karl Heinz Model: Eco-Press Vario (następca modelu Grass) Rok produkcji: 2017 – Bardzo mało motogodzin! Maszyna pochodzi z jednoosobowego warsztatu, jest bardzo zadbana i prawie nie nosi śladów użytkowania! W zestawie głowica wiertarska do zawiasów – wzór otworów Blum W zestawie głowica wiertarska do wiercenia w rzędzie (32 mm) – 10 wrzecion, uchylna o 90° Idealna także do wiercenia pod szuflady W zestawie wiertła do głowicy rzędowej Ø5mm Leitz Premium! W zestawie wiertła do głowicy do zawiasów Wartość wszystkich wierteł ok. 600€! W zestawie 2 szt. liniałów przedłużających z każdej strony W zestawie pneumatyczne dociski W zestawie laserowa pomoc do centrowania W zestawie mobilny stelaż – wysokość robocza 900mm W zestawie komplet narzędzi obsługowych, instrukcja obsługi itd. Ppjdpfjyl Iktox Agxer Gotowa do pracy, dostępna od zaraz! W celu uzyskania dalszych informacji proszę o zapytanie! Maszyna jest mobilna i może zostać zaprezentowana w każdej chwili. Odbiór osobisty! Sprzedawana tylko z powodu przejścia na maszynę CNC.

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: omejena funkcionalnost, Lakirna kabina po slikah naprodaj, vključno s žeravno progo, kot je razvidno s slik. Ob samostojni demontaži je cena predmet dogovora. Ppjdey Aldajpfx Agxor

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, Brez minimalne cene – prodaja zagotovljena najvišjemu ponudniku! Oddaja ponudbe zavezuje k prevzemu v obdobju od 23.06.2026 do 26.06.2026! TEHNIČNI PODATKI Premer posode: 700 mm Podpfx Agsy D Snboxepr PODATKI O STROJU Obratovalna napetost: 220 V Frekvenca: 50 Hz Dimenzije in teža Dimenzije (D x Š x V): 1.000 x 1.000 x 1.100 mm Teža: 200 kg Zunanja referenca: 70

Stanje: rabljeno, Leto izdelave: 2009, Premer odsesavanja: 250 mm Nazivni volumenski pretok: 3534 m³/h Filtrirna površina: 22,6 m² Ppsdoyym A Sjpfx Agxer Motor: 5,5 kW Briketiranje: zmogljivost ca.: 30 kg/h Premer briketa: 65 mm Motor: 3,0 kW Lokacija skladišča: Nattheim

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Na voljo je industrijski vakuumski odpraševalnik Höcker. Premer odsesavanja: 250 mm, nazivni prostorninski pretok: 4241 m³/h, minimalni pretok: 3534 m³/h, moč motorja: 5,5 kW, podtlak: 2940 Pa, teža: cca 630 kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Pjdey Ey Tzspfx Agxspr

Leto izdelave: 2013, stanje: rabljeno, We hereby offer you a used PET bottle crusher from the manufacturer BOREMA, model R-1200 F, year of manufacture 2013, for the residual emptying, degassing, and pre-compaction of supplied PET bottles ranging from 0.3 to 2.5 liters in capacity. The machine is equipped with a chassis and can be driven in and out of the feed hopper of your baler. The machine has a throughput capacity of approximately 85,000 bottles, corresponding to around 3 tons per hour. The following technical information is available: Manufacturer: BOREMA Umwelttechnik AG Model: R-1200 F (with hopper for driving the compactor in and out) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Main fuse: 40 A Construction: Inline system Function: Double-rotor press system Rotor pre-tensioning: pneumatic, approx. 16 t Overload protection via anti-blocking system Input material: PET disposable and returnable empty bottles, 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 L capacity Throughput capacity: approx. 3 t/h, equivalent to approx. 85,000 bottles/hour, depending on size Required compressed air capacity: G1/2”, 8 bar, 40 L/min Compaction ratio: 1:3 Internal flange dimensions: 972 x 1,220 mm (L x W) Feed opening: 565 x 1,280 mm (L x W) Weight: approx. 2,500 kg Applications: Thanks to the chassis, the PET compactor can be moved into the feed hopper of your baler as needed, ensuring the residual emptying, degassing, and pre-compaction of fed bottles and packaging. For material changes, the compactor is simply removed from the feed hopper, allowing continued baling of paper, cardboard, films, etc. without the use of the compactor. BOREMA PET compactor process: The plastic containers are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pre-tensioned by two air bellows and presses the PET bottles against the second rotating shaft with 16 t of pressure. This crushes, bursts, and degasses the closed plastic container. Residual liquids are drained, and the material drops pre-compacted into the baler. In the event of contaminants, the pneumatically pre-tensioned shaft moves aside and the contaminant is passed through. Key advantages compared to conventional PET perforators with punch spikes or knives: The BOREMA process is significantly more efficient and wear-resistant than conventional PET perforators with spikes or knives. The greatest advantage is that introduced contaminants such as metal parts, stones, bottles with frozen content, and wood pieces are guided through by the pneumatically yielding rotor shaft without the system stopping or suffering major damage. In conventional perforators, spikes or knives may break or become so jammed with contaminants that the system must be shut down and extensively repaired. Remarks: The documentation (operating instructions, CE, electrical/hydraulic wiring diagrams) is complete. Inspection by appointment is possible. We accept no liability for the technical data or any possible errors. Ppedpfxou Thpnj Agxsr

Stanje: rabljeno, Leto izdelave: 2025, New demonstration machine! List price €7,001 net #93803 High-performance dedusting unit compliant with DIN 8416 for extraction from processing machines, suitable for installation in workspaces outside of explosion hazard zones. Key design features: - Robust sheet steel construction, galvanized - Space-saving due to compact design - Delivered ready for operation - Low energy consumption with high performance thanks to high-efficiency fan with special impeller positioned on the clean-air side - Two large-volume collection containers with liner bags - Collection volume approx. 350 l - High operational safety and long service life due to BG-certified filters - Motorized cleaning device with automatic control and operating hours counter - PLC control with automatic start (additional slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Manufactured according to DIN 8416 - Residual dust content in exhaust air less than 0.1 mg/m³ - Passed GS-HO-14 "GS - H3" test Technical Data: Suction nozzle arrangement: Left Nominal volume flow (*): 1450 m³/h Max. volume flow: 1950 m³/h Vacuum at interface (*): - at nominal volume flow: 3200 Pa - at max. volume flow: 2700 Pa Filter area: 10.3 m² Suction nozzle: 160 mm Ppsdpsx Hwp Aofx Agxor Nozzle height, approx.: 1500 mm (centered) Fan motor: 2.20 kW, 3x400 V, 50 Hz Shaker motor: 0.12 kW, 3x400 V, 50 Hz Fuses: 16 A (provided by customer) Sound pressure level: 73.0 dB(A) Weight, approx.: 365 kg Dimensions L x W x H: 1648 x 1012 x 1990 mm (*) Mandatory data according to GS-HO-07 at 20 m/s with coated filter bags (beech test dust). In delivery condition and in practical use with coarser dust, suction power is significantly higher. Location: Rieth

Stanje: rabljeno, Leto izdelave: 2025, New display machine! List price €4,367 net. Robust galvanized sheet steel construction. Work surface with special folded cardboard filter, an additional secondary filter, and a filter cassette for extraction at floor level. All filters are easy and quick to replace. The internal radial fan, in explosion-proof design, is fitted with a steel impeller. The explosion-protected drive motor (EEx nA II) is positioned outside the air flow and drives the fan directly. A 10 m supply cable as well as a plug-and-socket combination with integrated on/off switch are included in the scope of delivery. Attention! The switch is not explosion-proof and is only suitable for use outside of hazardous areas. The fan pressure connection is located at the top. The air outlet is vertically upward. This paint mist extraction wall complies with the latest regulations. The paint mist extraction wall is designed for installation in painting areas classified as zone 2, where the average calculated concentration of flammable solvents is limited to < 25% of the lower explosion limit. Technical data: - Max. air volume flow: 3500 m³/h - Exhaust connection: 300 mm - Working surface: 2000 x 1000 mm - Space requirement: 2600 x 920 x 1420 mm (H) - Motor: 1.50 kW, EEx nA II T3, IP 55, 1500 rpm, B5, 400 V, 50 Hz - ATEX marking: Ex II 3 G - Sound pressure level: 75 dB(A) - Weight: 220 kg - Fan: left Ppedpfoy Ehlrjx Agxor Filters: - Folded cardboard filter 1000 x 2000 mm – 1 piece - Folded cardboard filter 1000 mm W (. 2072091295) – each as a 10-meter pack – flame retardant according to DIN 53438 F1/K1 – cut length = 25 folds per 1000 mm - 2072090518 cut-to-size filter for Paint-Star – 1 piece - 2072091473 cassette filter for Paintstar – 1 piece Storage location: Rieth

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months Psdpfx Aegfm Rysgxepr The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, Na voljo je popolna plastna paletirna linija IW-Anlagentechnik z ovijalcem palet Tosa in potisno tehnologijo. Procesna veriga: dovod izdelka – tvorjenje plasti – paletizacija – transport – ovijanje. 1) Paletirni sistem IW-Anlagentechnik PMS 120, letnik: 1992, rotacijska enota: 90°. 2) Transportna tehnika Transpak. 3) Rotacijski stretch-ovijalec Tosa 124E, letnik: 2010. Linija se je uporabljala v živilski industriji za paletiranje steklenic in drugih posod za tekočine. Dokumentacija je na voljo. Možen je ogled na lokaciji. Ppsdpfx Aey Eg Dgjgxjr

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, S&F Vibrating Screen Machine | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screen area: 2.0 m² per mesh size Screen decks: 1 piece Mesh aperture size: - 1st screen deck: punched perforated plate, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine color: RAL 3000 Flame Red including: Modular Silo Type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Article No.: 406.4345 including extension feet L = 1,100 mm including hopper extension and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and wood shavings - Biomass - Wood pellets - Charcoal Ppedpfxsy Aa Ugj Agxor - Waste wood - Bark vibrating screen | wood chip screen | vibrating screening machine | flat screen | oscillating screen | drum screen | screening machine for wood chips | CHP screening machine

Stanje: rabljeno, Leto izdelave: 2023, Število palet: 15 Dimenzije: 1,80 x 1,30 x 1,18 m Magazin za palete ni bil uporabljen. Dodatna oprema, prikazana orodja in vpenjalna sredstva so vključena v dobavo le, če je to navedeno v dodatnih informacijah. Ppedpfx Agjy Eh Akoxer Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje!

Stanje: rabljeno, Leto izdelave: 2013, dvižna višina: 3.700 mm, vrsta goriva: električni, barva: rdeča, Weights Unladen weight: 9,750 kg Functional Lifting capacity: 450 kg Working height: 2,250 cm CE marking: yes Condition Overall condition: average Technical condition: average Optical condition: average Pedjy Dt Eujpfx Agxepr Further information Terms of delivery: EXW Transport dimensions (L x W x H): 4.2 x 1.22 x 2.83 m Country of manufacture: DE Additional information For further details, please contact Christian Theißen. Manufacturer: PB Lifttechnik Model: S225-12E Year of manufacture: 2013 Category: Used Specifications: Max. working height: 22.50 m Platform height: 20.50 m Lifting load: 450 kg Platform dimensions L x W: 3.98 x 1.20 m Platform length (extended): 5.37 m Overall dimensions L x W: 4.20 x 1.22 m Drive type: battery Transport height with guardrails: 3.70 m Transport height without guardrails: 2.83 m Drivable up to working height: 22.50 m Ground clearance: 0.15 m Indoor use only: yes Own weight: 9,750 kg Special features: white tyres, anchor points for restraint systems (PPE) available Note: 3758 Control panel, lift switch defective, operation possible. Location: 41468 Neuss Immediately available

Stanje: dober (rabljeno), Leto izdelave: 2008, dvižna višina: 15.000 mm, vrsta goriva: električni, Drivetrain Drive: Wheel Weights Unladen weight: 5,120 kg Functional Data Lifting capacity: 400 kg Working height: 1,700 cm CE marking: yes Condition Technical condition: good Visual condition: good Additional Information Terms of delivery: EXW Transport dimensions (L x W x H): 3.18 x 1.62 x 2.28 m Country of manufacture: DE Further Information Please contact Christian Theißen for more details. Manufacturer: PB Lifttechnik Model: S171-16E Year of manufacture: 2008 Product type: Used Specifications: Max. working height: 16.96 m Platform height: 14.96 m Lifting capacity: 400 kg Lifting capacity on extension: 150 kg Platform dimensions (L x W): 3.09 x 1.62 m Platform length extended: 4.09 m Overall dimensions (L x W): 3.18 x 1.62 m Drive type: Battery Transport height with guardrails: 3.11 m Transport height without guardrails: 2.28 m Drivable up to working height: 16.96 m Ground clearance: 0.09 m Indoor use only: no Ppodpey Dtvajfx Agxsr Own weight: 5,120 kg Features: white tires, wide platform, anchor points for fall protection systems (PPE) available. Location: 41468 Neuss Available immediately

Stanje: rabljeno, Leto izdelave: 2017, dvižna višina: 14.900 mm, vrsta goriva: električni, Weights Unladen weight: 4,670 kg Ppsdpfx Aey Dr Rvjgxsr Functionality Lifting capacity: 400 kg Working height: 1,690 cm CE marking: yes Condition Overall condition: average Technical condition: average Visual condition: average Additional information Terms of delivery: EXW Transport dimensions (L x W x H): 2.98 x 1.21 Country of manufacture: DE Further information For more details, please contact Christian Theißen. Manufacturer: PB Lifttechnik Model: S171-12E Year of manufacture: 2017 Product type: Used Specifications: Max. working height: 16.90 m Max. platform height: 14.90 m Lifting capacity: 400 kg Lifting capacity on extension: 150 kg Drive type: Battery Platform dimensions (L x W): 2.80 x 1.20 m Platform length extended: 3.80 m Overall dimensions (L x W): 2.98 x 1.21 m Transport height with guard rail: 3.10 m Transport height without guard rail: 2.25 m Drivable up to working height: 16.90 m Ground clearance: 0.14 m Dead weight: 4,670 kg Special features: white, non-marking tyres; indoor use only; anchor points for personal fall protection systems (PPE) available. Location: 41468 Neuss Available immediately