Vig Gär- Und Lagerkeller nakup rabljenega (10.776)

Stanje: novo, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, skupna širina: 2.550 mm, skupna višina: 4.000 mm, dolžina tovornega prostora: 4.250 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, žerjav, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A, double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Maximum front axle load (technical): 10.0 t Maximum rear axle load (technical): 21 t Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Rockinger 50 trailer coupling for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E – Onboard diagnostics Cab color: signal white Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror Exterior sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running lights and low beam Automatic headlight range adjustment LED daytime running lights, “V-lights” Front LED fog lights Static LED cornering light Two amber LED beacon lamps, mounted on the front of the cab roof Roof grommets on both sides Wiring for roof-mounted headlights, max. 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Emblems/type identification installed ex works Emission type plate (Euro...) L-plate (low-noise vehicles -96) Flatbed body: Steel/welded construction, fixed-mounted, low-profile design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum sideboards, Manufacturer: Suer, height 600 mm, anodized finish, each side (right and left) Flush-mount lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible arrangement 6 stake pockets for stakes (3 per side) Hydraulically extendable flatbed section approx. 1200 mm, galvanized, loadable up to 3,000 kg, extendable with lighting and impact guard, recessed as low as possible, operable via radio remote control Robust headboard made of welded frame with recessed stake depot pockets Cladding panels and fenders made of tread plate, sandblasted and powder-coated, painted in vehicle color Toolboxes between rear axles with tread plate 5 toolboxes, tread plate natural finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted and powder-coated, painted in vehicle color. Rear underrun protection and additional supports assembled, with installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double-strand operation with foldable pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Ledpfxox A Nn To Aamorp Piston rods hard chromed Double linkage system with PROLINK (overbending knuckle arm up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure limitation and load-holding valves XF system (Extra Quick) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %), 90% and 100% warning on the display Danfoss D850 control block with 4 control valves mounted on crane column Emergency crane control High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt

Stanje: novo, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, skupna širina: 2.550 mm, skupna višina: 4.000 mm, dolžina tovornega prostora: 4.250 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, žerjav, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double-axle single reduction, hypoid type. Differential locks longitudinal and crosswise. Max. front axle load: 10.0 t (technical) Max. rear axle load: 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank right side Usable AdBlue tank capacity: 64 liters Rockinger 50 trailer coupling for drawbars with 50 mm diameter Electrical trailer connection, 15-pin Euro 6, Stage E - onboard diagnostics Cab color: signal white Heated and electrically adjustable mirrors, wide-angle mirrors both sides, ramp mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running lights and low beam Automatic headlight leveling Daytime running lights LED, "V-light" Front LED fog lights Static LED cornering light Two LED revolving beacons (orange), mounted at front of cab roof Cable ducts on both sides of cab roof. Wiring for roof-mounted headlights, up to 280 W 2 compressed air horns on the roof, controllable from the steering wheel. Roof antenna and CB radio preparation Ljdpfxjx A Nnto Aamsrp Front roof bar for accessories Emblems/type designations factory mounted. Emission type plate (Euro...) L-plate (low-noise vehicles -96) Body configuration in steel/welded construction, fixed mounted, low-profile design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum sideboards, brand Suer, height 600 mm, anodized finish each side (R and L) Removable aluminum sideboards, brand Suer, height 600 mm, anodized finish each side (R and L) Recessed lashing rings 2500 daN and 6500 daN each side, in perforated rail with flexible arrangement 6 stake pockets for stanchions (3 per side) Hydraulic extension of the platform to approx. 1200 mm, galvanized, loadable up to 3000 kg, extendable with lighting and collision protection, recessed as low as possible, operable by remote control Sturdy front wall consisting of welded frame with recessed stanchion depot pockets Cladding plates, fenders made of tread plate, sandblasted and powder coated, painted in vehicle color. Toolboxes between rear axles fitted with tread plate. 5 toolboxes, natural tread plate finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on the wheelbase or available space. Sandblasted and powder coated, painted in vehicle color. Mounting of rear underrun protection and additional outrigger, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20, for double-strand operation with folding sheave and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard chrome plated Double knuckle boom system with PROLINK (overbending jib up to 15°) Electronic overload shutdown device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency shut-off and optical alarm (90% and 100%) Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in display Danfoss D850 control block with 4 control valves mounted on crane column Emergency crane control High-pressure filter supplied piped Separate hydraulic tank (180 l) with filter

Stanje: novo, Cross-cut and Mitre Circular Saw GRAULE ZS 85 N - Tiltable - Includes: - Cross-cut and mitre circular saw GRAULE ZS 85 N - tiltable - Material positioning shoulder made of laminated wood - without machine stand and saw blade - Includes: Ljdpfx Aasu R Sycemorp - GRAULE machine stand suitable for model ZS 85 N up to ZS 170 Includes: - GRAULE feed roller conveyor type RO complete with support legs and connection brackets Ball-bearing plastic rollers, Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for conveyor height 885 +/- 10 mm Includes: - GRAULE roller conveyor / length stop, type RLK with scale and rear-folding material stop. Ball-bearing plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for conveyor height 885 +/- 10 mm - New exhibition machine -

Stanje: novo, Crosscut and Mitre Circular Saw GRAULE ZS 170 N - tiltable - Included: - Crosscut and Mitre Circular Saw GRAULE ZS 170 N - tiltable - - without machine stand and saw blade - Included: - Machine Stand GRAULE for type ZS 135 N and ZS 170 N Included: - Infeed Roller Conveyor GRAULE type RO complete with support legs and connecting angle Ball-bearing plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for roller conveyor height 885 +/- 10 mm Lodpeu R Sypsfx Aamorp Included: - Roller Conveyor/Length Stop GRAULE type RLK with scale and material stop foldable to the rear. Ball-bearing plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support legs for roller conveyor height 885 +/- 10 mm - new showroom machine -

Stanje: novo, Planer and Thicknesser HOLZKRAFT fs 41es TERSA - Demonstration Machine - ----- Technical Data ----- Planing Width: 410 mm Thicknessing Table Dimensions: 775 x 410 mm Table Length: 2,200 mm Max. Cutting Depth: 5 mm Cutterblock Diameter: 95 mm Number of Knives: 4 Workpiece Passage Height: 240 mm Minimum Workpiece Thickness: 3 mm Lrsdpfxeu R S Awe Aamep Feed Speed: 6 / 12 m/min Speed: 5,000 rpm Extraction Port Diameter: 120 mm Motor Power 400 V: 6.6 HP / 5.0 kW Weight: 450 kg - Special Offer Price - - New demonstration machine -

Stanje: novo, Planer and Thicknesser HOLZKRAFT fs 52es digital TERSA - Demonstration Machine - TERSA Cutter Block, electric height adjustment, digital readout for thickness setting ----- Technical Specifications ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, Ledpfou R Sztox Aamjrp Table length: 2,250 mm, Max. chip removal: 5 mm, Cutter block diameter: 120 mm, Number of knives: 4 pcs, Passage height: 240 mm, Min. workpiece thickness: 3 mm, Feed speed: 5 / 8 / 12 / 18 m/min, Spindle speed: 5,000 rpm, Extraction port diameter: 120 mm, Motor power 400 V: 9.5 HP / 7.0 kW, Weight: 695 kg - new demonstration machine -

Stanje: novo, Finiture lakirna linija za okna in vrata ----- Kratek opis: Poz. 1: 1x dvojna obešalna tirnica Poz. 2: 1x vrtljivi sklop za nosilce z eno sklopko Poz. 3: 1x "Superjet" potopna naprava Poz. 4: 1x visokotlačni vlažilec Poz. 5: 1x naprava za ločevanje odpadne vode Opcijsko: Lrjdpfx Asy D A Hhjamep Potopni kanal ali bazen (5–6 kadi) Podroben tehnični opis in načrt — glejte pripeto PDF datoteko! ----- Cena zgoraj navedene lakirne linije na povpraševanje! ----- (Tehnične navedbe po proizvajalcu – brez garancije!) Vse cene so brez DDV. DDV se obračuna posebej.

Stanje: dober (rabljeno), Machine images 1 to 9 Gillardon Price €9,500 Technical data: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 27 - Drill spindle taper: MK 4 - Quill stroke: 150 mm - 12 spindle speeds: 102 - 2000 rpm - 3 feed rates: 0.1 - 0.3 mm/rev - Min./max. distance spindle – table: 310 / 610 mm - Drilling radius min / max: 400 / 1200 mm - Table height: 720 mm - Table size: 1200 x 500 mm - Drive: 400 V / 1.6 / 2.9 kW Lsdpfx Asu Nm Nieamorp - Required space approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1,500 kg - Including: thread cutting device, hydraulic column and arm clamping, coolant system, T-slots vertically on the rear of the machine Machine 2 images 10 to 15 HKS 34 MT Price €16,500 Drilling capacity: 45 mm Table size: 1200 x 560 mm Drill spindle taper: MK 4 Quill stroke: 170 mm Speed / steps: 70-2000 rpm Feed / steps: 0.1, 0.2, 0.3 mm/rev Motor: 2.9 kW

Stanje: rabljeno, prevoženi kilometri: 249.000 km, moč: 315 kW (428,28 KM), prva registracija: 07/2020, vrsta goriva: dizel, skupna masa: 25.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.300 mm, Leto izdelave: 2020, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, Top maintained beverage vehicle MB Actros 254, special edition with Orten swing wall body and tail lift! Trailer brake: 2-line system, Equipment package: Comfort, Exterior mirror camera MirrorCam, 220 Ah battery, Interactive multimedia cockpit, Suspension: front springs 7.5 t, 2-leaf, Vehicle without trailer coupling, Vehicle without rear underrun protection, 150 A alternator, 12-speed transmission (type G 211-12), Fuel tank: 500 L aluminium, left, Cool box/refrigerator, Adjustable roof spoiler, Enhanced engine brake, Steerable and liftable 7.5 t trailing axle, Wheelbase variant: 4900 mm, Rear overhang: 2250 mm, Smoker package, Rain sensor, Tail lift switch, Additional remote control keys (2), External sun visor, Additional 12V/15A socket in passenger footwell, 24V/25A socket in passenger footwell, Preparation for 4 surround cameras (display on board monitor), Additional thermal insulation, Auxiliary water heater. Additional features: EURO 6 emission standard, Axle configuration: 6x2, Front axle load: 7.5 t, Actros 5, Actros cab S/M, Heated approach/front mirror, 24V/15-pin trailer socket, Exhaust to right, Two-piece exhaust system, Batteries mounted side by side, Rear axle differential lock, Compressed air connection in cab, Steel air tank, Air unit with condensate monitoring, Medium air unit, Automatic driving light activation (light sensor), Driver assistance systems: Attention Assist (fatigue detection sensor), Autonomous emergency brake assist (Active Brake Assist 5), Lane keeping assist, Cabin: fixed step, Cabin: hydraulic tilting, Cabin: M ClassicSpace, 2.30 m, 320 mm tunnel, LED outline marker lights, Suspension: leaf/air, Electric window lifters, Tinted windscreen, No rear wall window, Speed limiter, AdBlue tank: 60 L, Rear axle with 440 mm crown wheel, Body/chassis: chassis, Central locking system, Non-regulated steering booster pump, Steering oil cooling, Front air intake, 2-stage air compressor, Heated air dryer, Engine: 10.7 L – 315 kW R6 Diesel (OM 470), Engine type: OM 470, Usage: local distribution, Wheelbase not defined, Ramp mirror, Residual heat utilisation, Disc brakes front and rear axles, Remote control keys (2), Flashing LED side marker lights, Passenger seat with function in cab, Front splash guards, Front axle stabiliser, Additional stabiliser: rear/trailing axle, 12V socket in passenger footwell, Tachograph / EC control unit, Automatic daytime running lights, Truck Data Center 7 (fleet management system), Front underrun protection, Toll recording preparation, Preparation for Truck Data Center (fleet management system), Dropped front axle, Regulated water pump, Perm. total weight 25,000 kg Tyre condition approx. 80% OBU preparation Compartment for electric pallet truck. Vehicle should preferably be sold with trailer! Lredpfxszhravj Aamop For questions regarding the equipment, please call. Subject to errors and prior sale.

Stanje: rabljeno, Ferromatik mešalni polž Ø 70 mm za IU2495 in IU2650 – izbran iz Ferromatik K-Tec 450 - izbran iz IU2495 - odstranjen iz delujočega stroja - popolnoma funkcionalen - Vhod: 69,80 mm - Sredina: 69,80 mm - Izhod: 69,80 mm Lsdpfoyxg Tbex Aamorp - Skupna dolžina: 225,80 cm Proizvajalec: Ferromatik Milacron

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ležaji za žage DK14 Ležaji za žage DK16 Ležaj za žago DK17 Lredpfsxq R Rxex Aamsp in dodatna oprema

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, obratovalne ure: 120 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 620 mm, pomik po osi Z: 700 mm, največja hitrost vretena: 4.000 obr/min, hitrost pomika os X: 25 m/min, hitrost podajanja osi Y: 8 m/min, hitrost podajanja os Z: 8 m/min, hitrost vretena (min.): 140 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Naše razstavne stroje po izjemni ceni Rezkalni in vrtalni center MDX-60 z X-osnim pomikom 6300 mm ter MDX-20 z X-osnim pomikom 2050 mm Učinkovita CNC-tehnologija za ekonomično obdelavo delov Zakaj bi za te dele uporabljali drage in kompleksne CNC-stroje s standardnim, zahtevnim CNC upravljanjem ali nadaljevali z ročnimi, zamudnimi postopki, kot so risanje, zarisovanje in vrtanje?  Zaradi lastnega uporabniškega vmesnika CNC-znanje ni potrebno  Ni preprostejšega za uporabo CNC rezkalno-vrtalnega stroja  Tudi pri samo eni izvrtini je delo na stroju hitrejše kot ročno  Do 80 % prihranka časa Lredpfezdb Nmsx Aamop  Grafični prikaz programiranih delov na 21" zaslonu  Možnost potiskanja dolgih obdelovancev z doslednim programom  Neposreden uvoz DXF in DSTV podatkov iz CAD sistema  Visoka zanesljivost procesa in ponovljivost  Programiranje delov je mogoče že po nekaj minutah uvajanja Zakaj bi komplicirali, če lahko delate učinkoviteje? MDX-Center so robustni, pregledno zasnovani stroji z najnižjimi obratovalnimi stroški Naložba, ki se povrne že pri prvem kosu Pravi zniževalec stroškov za vsako kovinsko predelovalno podjetje Naša posebna cena za te demo stroje neposredno od proizvajalca iz Bavarske MDX 20 63.500,00 € dostavljeno MDX 60 91.000,00 € dostavljeno Ponudba velja do razprodaje zalog Dogovorite se za predstavitveni termin v Arnstorfu ali zahtevajte našo ponudbo

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, širina odprtine za polnjenje: 1.400 mm, skupna širina: 4.950 mm, skupna višina: 4.443 mm, skupna dolžina: 8.093 mm, vrsta vhodnega toka: trifazni, hod: 60 mm, For sale is a used, but technically well-maintained machine, which was reliably in operation until the end of June 2024. The machine is in working condition and is ideally suited either for immediate reuse or as a solid basis for custom modifications. Technical Features & Equipment: Modern belt feed The machine is equipped with a contemporary belt feed system, ensuring efficient and precise material handling. Drive couplings with bellows seals Ledpfxswzkuzo Aamerp Rugged bellows seals in the drive couplings ensure reliable power transmission—maintenance-friendly and durable. Large couplings (latest design upgrade) The machine is already fitted with the large couplings in accordance with the latest machine specification, offering increased stability and performance. Standardized compaction units The installed compaction units comply with common industry standards, ensuring consistent and powerful processing. Kneading rollers – good tread, used condition The kneading rollers are in used but fully functional condition with a good profile. Conveyor belts – used, but well preserved The conveyor belts show signs of age-appropriate use, but are operational and in good condition. Note: The polycarbonate inspection windows should be replaced due to wear marks appropriate for their age. The machine is currently dismantled but can be inspected. This machine offers an excellent combination of reliability and modern technology, ideal for operations seeking a proven solution with up-to-date features. If you have any questions or would like to arrange a viewing appointment, we will be glad to assist you.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: omejena funkcionalnost, Offered as a package: HURCO BMC 30 Machine no.: BK-9-002-020 Year of manufacture: 1990 HURCO BMC 45M Machine no.: 92001097BB Year of manufacture: 1997 The machines can be inspected but cannot be operated. Delivery terms: ex works Location: 36110 Schlitz-Bernshausen Availability: immediately Price: negotiable Ledpfxet Takao Aamjrp

Stanje: rabljeno, ABB REF542plus – osnovna enota/ terenski nadzorni in zaščitni sistem Podatke si oglejte na slikah. Ledpfx Aaotpwkqomorp Rabljen, delujoč, z manjšimi znaki uporabe, naprava ni bila uporabljena v spletnem okolju.

Stanje: rabljeno, Leto izdelave: 2017, Pregled Ta naprava za inšpekcijo nivoja polnjenja in zapiranja je bila izdelana leta 2017, stroj za kontrolo etiket pa leta 2015, oba pri nemškem podjetju Vision-Tec. Odmični sistem (pusher) je izdelalo nemško podjetje BBULL. Inšpekcijski sistem je zasnovan za kontrolo nivoja polnjenja, zapiranja in etikete na polnih steklenicah. Stroj bo v obratovanju do oktobra 2025. Tehnični podatki - Zmogljivost: nastavljiva Obseg dobave - Inšpekcija nivoja polnjenja | Vision Tec | 2017 Lodpfxoyhm D Ro Aamsrp - Inšpekcija etiket | Vision Tec | 2015 - Odmični sistem | BBULL

Stanje: pripravljen za uporabo (rabljen), Winter service attachment for Piaggio / Pfau: - Pfau LBS 180 snow plough - Mounting frame with electrohydraulic system and lifting cylinder Lredpfxjuyhk Ao Aamjp - Incl. lower link arms and pivot cylinder Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 8.150 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 600-687 und 610-352, skupna masa: 1.000 kg, premer rotorja: 252 mm, število rezil: 14, skupna dolžina: 5.100 mm, skupna višina: 810 mm, dolžina elektro omare: 600 mm, širina krmilne omare: 600 mm, višina krmilne omare: 215 mm, skupna širina: 1.100 mm, moč: 16 kW (21,75 KM), vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 590 obr/min, širina odprtine za polnjenje: 300 mm, dolžina polnilne odprtine: 3.000 mm, perforacija sita: 10 mm, premer ekstrakcijske šobe: 200 mm, vhodni tok: 45 A, višina dovoda: 450 mm, Oprema: CE označba, dokumentacija / priročnik, Horizontalni drobilnik z vibracijsko korito Weima WLH 300 in WRR 300; letnik 08/2014 - Idealno za drobljenje dolgih in kratkih kosov lesa - Samodejni zagon preko svetlobne pregrade - Zvočno izoliran pokrov na vstopnem območju za zmanjšanje hrupnih emisij Lredjzd Dhdjpfx Aamop

Stanje: rabljeno, The automatic liquid filling machine is suitable for plastic (PET) or glass bottles to be filled with liquid. Equipped with 9 filling heads and Siemens PLC control. Previously used for filling detergent by the previous owner. Requires electrical installation. Purchase of industrial equipment and machinery. Wide range of used machines and industrial plants. Lodehcxcmjpfx Aamerp

Leto izdelave: 2024, stanje: novo, We sell chip brushes suitable for common machine types made by Behringer and Kasto sawing machines. Minimum order quantity is 20 pieces. We are happy to respond to your inquiries. Lrsdpfx Ajtp T N Uoamop

Leto izdelave: 2024, stanje: novo, We sell chip brushes suitable for common machine types made by Behringer and Kasto sawing machines. Minimum order quantity is 20 pieces. We are happy to respond to your inquiries. Lredpfx Aaeww Dgiemep

Leto izdelave: 2024, stanje: novo, We sell chip brushes suitable for common machine types made by Behringer and Kasto sawing machines. Minimum order quantity is 20 pieces. We are happy to respond to your inquiries. Lrodpfx Aasv Uau Somep

Stanje: rabljeno, Power supply systems, construction site emergency lighting, emergency exit sign luminaires, escape route luminaires, emergency and escape route lighting, emergency luminaires, escape routes - Emergency lighting with charger, control unit and batteries - Dimensions of large luminaires: 665/180/H120 mm, 36 units Ledpfxedpmmts Aamerp - Dimensions of small luminaires: 420/170/H90 mm, 14 units - 2x lots of luminaires: with charger and control unit included - Price: per lot - Weight: 820 kg/lot

Stanje: rabljeno, Multiple spindle head, multi-spindle drilling head, drilling gearbox - Quantity multi-spindle head: 3 - Spindles: 2, 3 + 4 - Mount: Ø 20 x 28 mm - Price: complete - Dimensions: see pictures Ljdpfsd Nzg Dox Aamjrp - Weight: 7 kg

Leto izdelave: 1983, stanje: rabljeno, PLC control, machine control, module Lrodpfxed Tn Dkj Aamep -Make/Model number: 2529 and 2530 -Serial number: 109-998-4201b-2 -Dimensions: 190/130/H20 mm -Quantity: 2 units available -Price: per piece -Weight: 200 g