Hitri radialni vrtalnik

Gillardon HKS HKS 34 MT und GSR 32

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Premer vrtenja nad posteljo: 400 mm Premer vrtenja nad prečnim saneh: 220 mm Razdalja med konicama: 1500 mm Premer vretena: 50 mm Hitrost vrtenja: 12,5 – 3150 obr/min Moč: 5,5 kW Potrebna moč: 16 kVA Mere (D x Š x V): 2900 x 1000 x 2200 mm Teža: cca 1600 kg Oprema, dodatki - 3-čeljustna vpenjalna glava, D200 mm - 4-kratni držalo orodja - Luneta - Prikazovalnik obremenitve motorja Nedpfxsxiymto Ag Tewc - Hitri pomiki - Pogonski sistem s sklopko - Vretenasta zavora - Zadnja zavesa proti brizganju - Kaljeno in brušene vodilne tirnice v odličnem stanju - Fiksna luneta - Hladilni sistem - Dokumentacija Stroj je bil malo uporabljen in je v odličnem stanju. Sistem za merjenje pomika ni vgrajen.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Tischgröße 800 x 240 mm Arbeitsfläche 730 x 210 mm „T“-Nutgröße auf dem Tisch 14 (M12) Drehzahlbereich 75 – 3200 U/min Bohrkapazität im Guss 45 mm Bohrleistung in Stahl 32 mm Längsbewegung (X) 560 mm Querbewegung (Y) 190 mm Vertikaler Verfahrweg (Z) 350 mm Werkzeughalter ISO40/Morze 4 Spindel-Säulen-Abstand 460 mm Abstand zwischen Spindelnase und Tischoberfläche: 445 mm Spindelhub 120 mm Gesamthöhe der Maschine in oberer Z-Position: 1450 mm Die Spindel ist im Bereich von +/-90° verstellbar Antriebsleistung 1,1/1,5 / 400 V Maschinengewicht 480 kg Abmessungen: 1280 x 960 x 2100 mm Zubehör: Nwjdpfoxz D Npsx Ag Tjc - Gewindeschneidfunktion - 3-achsiges Anzeigersystem - Y+Z-Achsenabdeckungen - ISO40 Bohrfutteradapter - Eingebauter digitaler Tiefenmesser - Automatischer stufenloser Vorschub und Eilgang auf der X-Achse - Motorisiertes Heben und Senken des Spindelstochs - Halogenlampe - Maschinenfuß aus Guss Die Maschine ist fabrikneu und war nie in Produktion.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Nodpfxeu Aa I Sj Ag Towc Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos Nodpfx Aonzpx Reg Tewc -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 400 mm Swing diameter over carriage: 220 mm Turning length: 1100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis: longitudinal: 0.08 - 1.10 m/min Feed range y-axis: cross: 0.028 - 0.40 m/min Tailstock quill taper: MT4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Machine dimensions (LxWxH) approx.: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm manufacturer Forkardt with exchangeable jaws - Multifix tool post - Coolant system with pump - Chuck guard - Chip tray - Splash guard Accessories: - Chuck key - Tool holder Nodpeu Ix E Hefx Ag Towc - 2 gears

Stanje: zelo dobro (rabljeno), Knuth UFM 2 univerzalna rezkalna naprava Tehnične specifikacije Potovalna razdalja X-os (ročno) 800 mm Potovalna razdalja X-os 750 mm Potovalna razdalja Y-os 300 mm Potovalna razdalja Z-os 400 mm Velikost mize 1320x320 mm T-utori 5x14x63 mm Podajalne hitrosti Podajalna razdalja Y-os (8) 20 - 360 mm/min Podajalna razdalja Z-os 600 mm/min Hitrost vretena (12) 58 - 1800 min-1 Stožec navpičnega vretena SK 40 Razdalja med konico vretena in mizo 0 - 400 mm Zasuk glave 45° Stožec vodoravnega vretena SK 50 Pogon Glavna moč motorja 4 kW Moč motorja na osi Z 0,75 kW Moč napajalnega motorja 0,55 kW Moč motorja hladilne črpalke 0,09 kW Zmogljivost hladilne črpalke 25 l/min Njdpfx Agjnfu Rij Tswc Dimenzije in teža Dimenzije 1900x1720x1750 mm Teža 2100 kg Financiranje preko naše banke je prav tako mogoče. komplett-konzept.leasingo.de Druge nove in rabljene artikle najdete v naši spletni trgovini! Mednarodni stroški poštnine na zahtevo!

Stanje: novo, Capaciteit, mm ----- 25 x 2 mm Min/max buigradius ----- 10/100 mm Radiusverschil ----- 90 mm Buigsnelheid/herhaalbaarheid ----- 500º/s. ±0,05° Buislengte ----- 1.350 ∞ mm Gewicht ----- 2.200 kg Machineafmetingen ----- 3,0 x 1,2 x 1,3 m Buisrotatie ----- 0–850°/sec Lengteaanvoer ----- Standaard 0–2.400 mm/sec Booster ----- 0–1.200 mm/sec Tolerantiegraad ----- 0,05°/mm Draaitijd buigkop ----- 0,75 sec Nedpega T Exjfx Ag Tewc Standaardcomponenten volgens VDMA-, ISO- en DIN-normen. OPTIES * Online verbinding met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaadherkenning en buispositionering via elektromagnetische of optische detectie * Vrije radiusbuiging * Simulatie-/botsingcontrole * Verlenging van bedlengte

Stanje: novo, TC 165 x 750V Image shows MIOTAL® TC 180 x 1000 Centre distance: 750 mm Centre height: 165 mm Swing over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Nwodpfx Aoir Igweg Tsc Top slide travel: 90 mm Spindle mount: DIN 55029 (Camlock) D1-4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2,000 rpm Mechanical gearbox stages: 3 Motor power: 2.2 kW Longitudinal feed Z: (40) 0.044 - 1.96 mm/rev Cross feed X: (40) 0.022 - 0.98 mm/rev Metric threads: (32) 0.4 - 7.0 mm Inch threads: (32) 4 - 56 TPI Module threads: (32) 0.4 - 7.0 Diametral threads: (32) 7.5 - 112 Tailstock quill diameter: Ø 40 mm Tailstock quill taper: MT 3 Quill stroke: 100 mm Lateral offset: ± 10 mm Weight, approx.: 650 kg Features: - Inspection certificate to DIN standards - Precise, hardened and ground guideways - Robust headstock with oil circulation lubrication, precision spindle bearings, gears hardened and ground for long-lasting quality - Electromagnetic spindle brake (TC), frequency inverter with electric braking system (V models) - Torsion-resistant Meehanite cast iron beds, stress-relieved and extensively ribbed for maximum smoothness - Electrical equipment by SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse pushbutton for main spindle - CE / IEC as well as German documentation and German service Standard equipment (included accessories): - Machine stand with splash guard back panel - 3-jaw chuck - 4-way toolpost - Foot pedal with mechanical brake - Coolant system - Chuck guard and spindle guard in compliance with European CE safety standards - 1 fixed centre for main spindle - 1 fixed centre MT3 - 1 test report - Safety guards and electrical equipment according to CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Multifix quick-change toolpost system Also available as a geared head variant.

Leto izdelave: 2012, Stanje: dober (rabljeno), številka stroja/vozila: ENOG, DEMAG KBK Crane Suspension System / Crane Runway Approx. 8x4 m Load Capacity / Lifting Capacity: 250 KG - 0.25 t Technical Data of the System: Crane runway made of Demag KBK1 + KBK2 rails System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carrier, mounting brackets/hangers, etc. Including Demag DC-COM 250 KG electric chain hoist Crane is dismantled and immediately available Njdpfx Aomqf Nfsg Tewc Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are kept in stock! Other KBK systems also available. Load capacity ranges from 125 KG to 1600 KG. Please inquire with your required crane runway length, overhang, and dimensions.

Stanje: rabljeno, Paleta s T-utoroma, primerna za DMG DMC 100 H in DMG DMC 100 U. Na voljo je še več palet. Nwsdpfsqx Uh Nex Ag Tsc