Tacchi Težka Stružnica nakup rabljenega (3.431)

Stanje: rabljeno, Leto izdelave: 2016, Technical Details: Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speeds: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev cross: 0.025 - 0.376 mm/rev Spindle bore diameter: Ø 42 mm Tailstock taper (ISO): MK4 Tailstock quill stroke: 180 mm Total connected load: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions approx. (LxWxH): 2.4 x 1.0 x 1.7 m The lathe does not feature rapid traverse. Positioning via 2 axes Display via Pinacho Lathe Controller Multifix quick-change tool post with turning tool Coolant system Foot switch Hsdpfsvav Sdsx Apben Thread cutting possible (metric, Whitworth, module, pitch)

Stanje: rabljeno, Leto izdelave: 1979, Technical details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over rear slide: 138 mm Swing diameter over rear slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm (8x stepless) Clamping diameter: 26 mm Feed range x-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MT5 Tailstock quill travel: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Dimensions (LxWxH) approx.: 3.2 x 1.2 x 1.8 m Application: Primarily for back turning and relief grinding of cutting tools (especially hobbing cutters, with or without thread pitch). Back turning and relief grinding possible from the front, the rear, and along the machine axis. Main drive via 8-step manual gearbox. Feed gearbox designed as a 12-step manual gearbox. Swivel range of the rear slide = 360°; Swivel range of the cross slide = 360°. Chuck is a taper disk Ø 200mm with MT5. Equipment: Hjdpevbhv Rofx Apben Mandrel Ø 49.5 x 400mm ARBAH-L 3+1 measuring system FRENIC 5000G11 frequency inverter 3-jaw chuck Ø 250 mm in good condition.

Stanje: rabljeno, Leto izdelave: 1970, Technical Details: Swing diameter over bed: 325 mm Swing diameter over support: 150 mm Turning length: 1000 mm Turning length, facing: 165 mm / cross: 160 mm Center height over bed: 200 mm Length of gap: no gap mm Spindle speed range: 48 - 1,500 rpm / 10 steps Spindle bore: 40 mm Feeds: longitudinal: 0.021–2.34 mm, cross: 0.09–1.6 mm Tailstock quill taper: MK 4 Tailstock quill travel: 125 mm Total power requirement: 2.2 kW Machine weight approx.: 1.0 t Machine dimensions approx. LxWxH: 2.1 x 0.7 x 1.2 m Thread cutting possible: Metric, Whitworth and module threads Equipment: - 3-jaw chuck Ø 200 mm with internal clamping jaws Hjdpfeu Ixydjx Apbon - Multifix quick-change tool post - Foot brake - Coolant pump (supply exclusive)

Stanje: rabljeno, Leto izdelave: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range X-axis: 0.0120 - 0.1000 mm/rev Feed range Z-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (non-binding) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm Hjdpfou Ix D Aox Apbjn 4-way tool post, swiveling 30° right/left 2x T-slot for copying device Live center

Stanje: rabljeno, Leto izdelave: 1951, Technical Details: Swing over bed: 400 mm Swing over cross slide: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: MT 4 Tailstock quill travel: 180 mm Approx. machine weight: 1.6 t Approx. machine dimensions (LxWxH): 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has been rewired and fitted with a new control cabinet. Emergency stop switch and chuck guard Hedpou Ix Hdefx Apbon 3-jaw chuck, Ø 250 mm Live centre Toolpost: four-way toolholder Compound slide swivels approx. 30° to the right/left Taper turning attachment (taper 15° right/left) 4 change gears included

Stanje: rabljeno, Leto izdelave: 1986, Technical details: Swing diameter over bed: 315 mm Swing diameter over cross slide: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over face slide: 200 mm Centre height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 rpm / only 6-step left-right Feed range X-axis: longitudinal: 0.02–0.8 m/min Feed range Y-axis: cross: 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m - Workpiece clamping via collet chuck - Travel distances: longitudinal slide = 580 mm, cross slide = 170 mm - incl. tool rest - incl. change gears Hsdpfx Asu Ix Hqepbjn - Steady rest Ø 100 mm - Four-way toolpost The machine is operating with restricted function! 6 spindle speeds are currently selectable! (224/1800; 280/2240; 355/2800 rpm) Sale as described.

Stanje: rabljeno, Leto izdelave: 2004, Technical details: Swing diameter over bed: 610 mm Swing diameter over cross slide: 350 mm Turning diameter over bed: 610 mm Centre distance: 1,390 mm Control: Fanuc 0i-Mate TC X-axis (transverse travel): approx. 305 mm Z-axis (longitudinal travel): approx. 1,350 mm Spindle speed: 22 - 2,200 rpm Feed rate (X & Z axis): 5 / 10 m/min Spindle bore: Ø 70 mm Hjdpfx Apju Ix I Ujbjn Turret - number of stations: 6 Tailstock quill taper: MK5 Tailstock quill stroke: 150 mm Machine weight approx.: 2.7 t Total power requirement: 15 kW Machine dimensions (LxWxH) approx.: 3.7 x 1.7 x 1.7 m Hydraulic unit dimensions: 630 x 460 x 900 mm Additional features: - Hydraulic chuck TONFAU Ø 300 mm - Hydraulic system - Coolant system - Control panel - Double foot switch Accessories: - Various hard jaws - Various soft jaws - 6 foot rests

Stanje: rabljeno, Leto izdelave: 2014, Technical Details: Swing diameter over bed: 356 mm Hsdjw D Dcqepfx Apbjn Swing diameter over cross slide: 220 mm Turning length: 1000 mm Centre height: 180 mm Distance between centres: 1000 mm Spindle bore: 38 mm Speed range: 45 - 1800 rpm Longitudinal feeds: 0.043 - 0.653 mm/rev, 42 steps Tailstock quill taper: MT3 Tailstock quill travel: 95 mm Total power requirement: 4 kW Machine weight approx.: 0.85 t Machine dimensions approx. (LxWxH): 1.92 x 0.8 x 1.49 m (including display unit) Various accessories

Stanje: rabljeno, Leto izdelave: 2011, Technical Details: Turning length: 310 mm Hodpjw S Efzjfx Apbjn Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Centre distance: 500 mm X-axis travel: 190 mm Z-axis travel: Z1: 335 / Z3: 370 mm Y-axis travel: 80 mm Spindle speed: 6,000 rpm Control: Heidenhain CNC Pilot 4290 Spindle bore: 73 mm Bar capacity: 50 mm Tool turret - Number of stations: 12 Tool holder: VDI 30 mm Rapid traverse X & Z axes: 30 m/min Operating hours (power on): 36,443 h Operating hours (spindle): 8,545 h Interface: yes Total power requirement: 20 kVA Chip conveyor dimensions (LxWxH): 3.2 x 0.45 x 1.5 m CNC Slant Bed Lathe Includes a 3-jaw chuck Ø160 mm with matching flange (max. speed 4,500 rpm) and 2 additional sets of replacement jaws. 12-station turret, all tool positions with live tooling; Sauter disc turret (C-axis = 300 rpm). Main spindle torque: 95 Nm at 100%, 127 Nm at 40% Chip conveyor: 450 K-1/250; Year of manufacture: 2000 Electrical cabinet with Rittal cooling The machine does not feature a hydraulic chuck; a manual chuck has been installed by the previous owner. The machine is offered for sale as non-functional. There is an unknown malfunction in the turret, therefore reference runs and axis movements are not possible. Thus, machining operation is currently not possible. The machine is for sale as in need of repair! i.D.

Stanje: rabljeno, Leto izdelave: 1990, Technical details: Spindle bore: 23 mm Z-axis travel: 150 mm Turning length: 150 mm Stroke: X+Z axis = 30 mm Cross travel (X-axis): 30 mm Longitudinal travel (Z-axis): 30 mm Control: Num 760T Spindle speeds - stepless: rpm Feed rate X/Y: 5 mm/min Feed rate Z: 10 mm/min Tool turret: 2 units, each with 6 tools Operating pressure: max. 45 bar Total power requirement: 8.0 kW Machine weight approx.: 2.2 t Machine dimensions approx. LxWxH: 2.45 x 1.3 x 2.2 m Bar feeder dimensions LxWxH: 4.65 x 0.5 x 1.3 m Hodpfx Apeu Iwyvjben Technical specifications: - Bar clamping is hydraulic - Automatic workpiece ejection (via collecting basket) - 2 turret heads, each with 6 tool positions - Coolant system - Movable NUM 760 control panel (size: L: 1.0 x W: 0.8 x H: 1.56 m) Accessories: - Bar feeder, make: IEMCA Type CS 112/31 Our sale at clearance price, not functional, offered as parts donor or for spares.

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Swing diameter over bed: 180 mm Turning length: 490 mm Swing diameter: 450 mm Cross travel: Z-axis travel: 168 mm Control: Traub TX8D Spindle speed: 20 - 4000 rpm Spindle bore: Ø 60 mm Operating hours / Power-on hours: 23,495 h Hedpfxsu Ix N Ss Apbsn Tool turret: 12 tools Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. (LxWxH): 3.6 x 2.5 x 2.2 m Tool holder cylindrical shank DIN 69880 (VDI 3425) Ø 40x63 Röhm power chuck Ø 200 mm hydraulic clamping Operation via double foot switch and control panel/operator console. Coolant system The Traub has an integrated chip conveyor with a discharge height of 1,100 mm (currently not functional). Accessories: various small parts 8 various machine feet without tailstock i.D.

Stanje: rabljeno, Leto izdelave: 2008, Technical Details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Z-axis travel: 800 mm X-axis travel: 260 mm Control: Fanuc 18i-TB Spindle bore: Ø 73 mm Bar capacity: Ø 65 mm Spindle speed: 0 ... 5000 stepless rpm Spindle torque: max. 250 Nm Rapid traverse in X/Y/Z axes: X/Z: 30 m/min / Y: 12 m/min Hsdpfevvtpxjx Apbsn Rapid traverse speed C-axis: 1000 rpm Tool turret – number of stations: 12 (Sauter) Operating pressure: 6.0 bar Electrical specification – voltage/frequency: 3 x 400 V / 50-60 Hz Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight approx.: 5.7 t Machine dimensions approx. LxWxH: 2.2 x 3.4 x 2.4 m Chip conveyor dimensions LxWxH: approx. 2.9 x 0.6 x 0.55 m (0.38 t) Chip tray dimensions LxWxH: approx. 1.6 x 1.3 x 0.25 m (0.2 t) Transport dimensions machine: approx. 3.3 x 1.9 x 2.2 m The machine features a C-AXIS, E-axis, Y-axis, and W-axis Driven tools can be used at all turret stations Distance spindle to sub-spindle = 1050 mm Sub-spindle: A2-6, travel 800 mm, spindle Ø 105 mm, torque 250 Nm Control cabinet equipped with Rittal cooler With hinge belt chip conveyor Chip tray Compressed air gun Machine is offered WITHOUT chuck as shown!

Stanje: rabljeno, Leto izdelave: 1963, Technical details: Hjdpfju Ix Arjx Apbjn Swing diameter over bed: 1000 mm Swing diameter over saddle: 620 mm Turning length: 3150 mm Centre distance: 3150 mm Swing diameter in gap: 1200 mm Length of gap: 800 mm Machine weight approx.: 11.5 t Machine dimensions approx. LxWxH: 7.5 x 1.5 x 1.7 m Including 2 steadies and various centres

Stanje: rabljeno, Leto izdelave: 1974, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Turning length: 2,100 mm Distance between centers: 2,000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1,800 / 18 steps rpm Rapid traverse X-axis: Slide 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 180 mm Control voltage: 220 V Approx. machine weight: 3.25 t Approx. machine dimensions LxWxH: 3.5 x 1.2 x 1.6 m Hodpfx Apsu Ix Dcobjn Thread cutting possible, e.g. metric threads, module threads, and inch threads Cross slide rapid traverse Chuck guard 2x chip pans Accessories: (see comparable on photo) 2x steady rests (1x closed and 1x open) Face plate 3-jaw chuck Jaw sets Flange Centers various gears

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 400 mm Swing diameter over carriage: 220 mm Turning length: 1100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis: longitudinal: 0.08 - 1.10 m/min Feed range y-axis: cross: 0.028 - 0.40 m/min Tailstock quill taper: MT4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Machine dimensions (LxWxH) approx.: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm manufacturer Forkardt with exchangeable jaws - Multifix tool post - Coolant system with pump - Chuck guard - Chip tray - Splash guard Accessories: - Chuck key Hodpfx Aju Ix E Hopbjn - Tool holder - 2 gears

Stanje: rabljeno, Leto izdelave: 2014, Technical Details: Length: 8,000 mm Width: 1,600 mm Height above ground: 980 mm Load capacity: 40 t Axle spacing: 980 mm Track gauge: 550 mm Weight: 9.5 t Dimensions (L x W x H): 13.3 x 2.5 x 2.65 m - Suitable for use with tractors - Equipped with corner posts - Drawbar: Length 1,300 mm; Coupling height 1,400 mm; Offset 600 mm; Secured with alignment pin Ø 72 x 90 mm - Fitted with solid rubber tyres (2x twin rocker axles with 4 wheels) - Technically permitted speed: 6 km/h Hjdju Nv Tqopfx Apbon Note: 160 mm refers to the distance between the steel uprights i.D.

Stanje: rabljeno, Leto izdelave: 1970, Technical details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Turning length: 1000 mm Centre height measured in bed: 250 mm Centre distance: 1000 mm Spindle speeds: 18...1800 / 21 step rpm Spindle bore: 56 mm Tailstock quill stroke: 180 mm Longitudinal feeds: 0.08 - 3.26 mm/rev Cross feeds: 0.04 - 1.63 mm/rev Rapid traverse X-axis: 4.2 m/min Total power requirement: 7.5 kW Machine weight approx.: 2.9 t Machine dimensions approx. LxWxH: 2.6 x 1.1 x 1.3 m 4-jaw chuck Ø 250 mm with internal jaws Live centre in tailstock 4-way quick-change tool post Coolant system Accessories: various reduction sleeves MK3-MK5-MK4 Live centre Driving dog 3-jaw chuck Ø 250 mm with internal jaws The machine does not comply with UVV regulations! Hedjvvrpkjpfx Apbjn

Stanje: rabljeno, Technical Details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Spindle bore: Ø 32 mm Spindle speed range: 36...1,800 / 8 steps rpm Feed range x-axis (longitudinal): 0.02..0.8 m/min Feed range y-axis (facing): 0.01..0.4 m/min Hjdpfxovadd Is Apben Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions (LxWxH) approx.: 2.1 x 1.1 x 1.4 m Precision Lathe by Mikromat - Travel of carriage: longitudinal = 580 mm; cross slide = 170 mm; top slide = 130 mm - Workpiece holding via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Quick-change tool post: Multifix Equipment: Coolant pump 4 machine feet Copying attachment

Stanje: rabljeno, Leto izdelave: 1999, Tehnički detalji: Prečnik obrade iznad ležišta: 180 mm Prečnik obrade iznad poprečnog suportera: 75 mm Dužina obrade: 325 mm Hod po X-osi: 56 mm Hod po Z-osi: 176 mm Upravljanje: FANUC 21T Broj obrtaja: 50 - 3000 o/min Spoljašnji prečnik vretena u prednjem ležištu: 50 mm Maksimalna potisna sila Z ose: 3000 N Provrt vretena: 30 mm Maksimalna snaga glavnog vretena: 3,7 kW Električne karakteristike - napon/frekvencija: 400 V / 50-60 Hz Težina mašine cca: 1,0 t Dimenzije mašine (DxŠxV): 2,2 x 1,0 x 1,62 m EMCO TURN 325 je univerzalni CNC/konvencionalni strug iz programa kompanije EMCO-Group (Austrija). Pripada srednjem segmentu po snazi i veličini i često se koristi u obuci, radionicama i proizvodnji. Posebno je namenjena za preciznu obradu sitnih delova, osovina i steznih komada. Hedpfjy Emfqex Apbjn Automatski stezni prihvat razna dodatna oprema postoji interfejs za uvlačivač šipki

Stanje: rabljeno, Leto izdelave: 1999, Tehnične podrobnosti: Premer struženja nad ležiščem: 554 mm Premer struženja nad sani: 370 mm Dolžina struženja: 1000 mm Razdalja med konicama: 1100 mm Krmiljenje: Fanuc 210i Premik v vzdolžni smeri (Z-os): 1000 mm Prečni hod (X-os): 290 mm Število obratov: 16 - 1800 min⁻¹ Hod vretena: 178 mm Pomik: 10 m/min Premer vretenine: 104 mm Vretenasta prirobnica: D1 - 11 Konus konjiča ISO: 6 MT Vretenov motor: 11/7,5 kW Priključna napetost: 380 V Električna izvedba - napetost/frekvenca: 3 faze / 400 V / 50 Hz Skupna priključna moč: 11 kW Hjdpfx Apov Azdwjbon Teža stroja pribl.: 4,0 t Mere stroja pribl. D x Š x V: 3,3 x 1,8 x 1,7 m

Stanje: rabljeno, Leto izdelave: 2010, Technical details: Spindle bore: 92 mm Turning length: 1000 mm Z-axis: min.: 404 mm; max.: 1130 mm Cross travel (X-axis): min./max.: 15 / 335 mm Control: Sinumerik SL840D Spindle torque: 2500 Nm Tool turret: 12 axial tools Operating pressure: 6.0 bar Rapid traverse: 20 m/min Total power requirement: 88 kVA Machine dimensions approx. (LxWxH): approx. 4.45 x m Bar loader dimensions (LxWxH): approx. L: 5.7 x W: 2.65 x H: 2.4 m Lathe with bar loader - SL 840D control with NCU Software 2.6, System Software 1.4, Shop Turn Software 6.4, with orientable C-axis, without driven tools - Chuck KNCS 260-72, SMW Autoblok - Clamping force generator via VNK-200/86 clamping cylinder / SMW Autoblok - Measuring system by Heidenhain - Sauter VDI50 disk turret, electric drive Bar Loader Master 80HF, Type 33LL: - Bar stock dimension min./max.: Ø 20mm / 80mm - Minimum workpiece length: 33-38-43 up to 1000mm - Maximum workpiece length: 33 - 3300mm / 38 - 3800mm / 43 - 4300mm Hodpswf Nrajfx Apbjn - Feed speed (adjustable) 150mm/sec, return speed (adjustable) 950mm/sec - Max. remnant length: Ø 8+65mm = 400mm / Ø 66+80mm = 250mm - Min. remnant 120mm Chip conveyor/hinged belt by Richter, Type SP 450/63 - Discharge height = 1000mm, discharge side right Accessories: - Various VDI 50 tool holders - Measuring adapter SK50-> VDI 50 - Power chuck Hainbuch Toplus Kombi Axial-pull GR100 - Various sleeves, guide jaws for bar loader Ø 20 - 75mm i.d.

Stanje: rabljeno, Leto izdelave: 1998, Tehnični podatki: Notranji premer: 63 mm Obodni premer: 320 - 800 mm Globina brušenja: 380 mm Hsdeu Ngcispfx Apben Skupna potrebna moč: ca. 1,1 kW Pomik: 0,05 - 0,40 mm/ob / 8 stopenj U/min Teža pribl.: 1060 kg Dimenzije stroja (D x Š x V): 1,1 x 1,1 x 1,4 m Stružnica za zavorne bobne in kolute - Največji/najmanjši premer struženja: 800 / 320 mm - Nosilec zavornega bobna: 63 mm, hod pinole 120 mm - Premik prečnega sanika: vzdolžni hod 380 mm; prečni hod 200 mm - Nosilec orodja: 180 x 140 mm, nosilec orodja 58 mm, stružni nož za držalo izmenljivih ploščic 20 x 20 mm - Upravljanje preko nadzorne plošče

Stanje: rabljeno, Tehnične podrobnosti: Premer struženja nad posteljo: 460 mm Premer struženja nad suportom: 350 mm Dolžina struženja: 1500 mm Hjdpfxowa Nwfj Apbon Višina konice: 250 mm Vrtina delovne vretena: 52 mm Območje vrtljajev: 35 - 1800 min⁻¹ Hod pinole konjička: 230 mm Konjičkovo vpenjanje MK: MK4 Približna teža stroja: 2,7 t Dimenzije stroja pribl. D x Š x V: 2,88 x 1,2 x 1,5 m Črpalka za hladilno tekočino z dovodom do ročnega ventila Pribor: luneta D = 130 mm zaprta 3-čeljustna vpenjalna glava D = 315 mm Forkhardt F315

Stanje: rabljeno, Leto izdelave: 2000, Tehnične podrobnosti: Premer struženja nad posteljo: 340 mm Hedpfjylt Nzex Apbon Premer struženja nad prečnim suportom: 158 mm Dolžina struženja: 300 mm Pot prečnega pomika (os X): 300 mm Pot vzdolžnega pomika (os Z): 300 mm Krmiljenje: Siemens 810T Število vrtljajev: 60 - 4.000 vrt/min Navor na vretenu: 106 - 145 Nm Zunanji premer vretena v prednjem ležaju: 80 mm Pogon podajal: AC, 8.500 N Hitri pomik v smeri X: 6 m/min Revolver za orodje - število postaj: 8 Pomik konjička: 120 mm Moč glavnega vretena: 11/15 kW Električna izvedba - napetost/frekvenca: 380/50 V/Hz Skupna potreba po moči: 20 KVA

Stanje: rabljeno, Leto izdelave: 1997, Tehnične podrobnosti: Premer struženja nad posteljo: 550/500 mm Hodpfx Apjyya H Debsn Premer struženja nad prečnim suportom: 290 mm Dolžina struženja: 1500 mm Premer struženja nad suportom: 290 mm Razdalja med konicama: 1500 mm Prehod vretena: 68-70 mm Krmiljenje: Fanuc/Siemens Območje vrtljajev: 3 - 2800 obr/min Hod pinole konjička: 160 mm Teža stroja pribl.: 3,3 t Dimenzije stroja cca D x Š x V: 3,33 x 1,55 x 1,79 m Multiflex hitromenjalni nosilec, velikost C *