Stroj Za Obdelavo Pločevine nakup rabljenega (99.698)

Stanje: novo, Leto izdelave: 2024, Stanje novo Leto proizvodnje 2024 Številka zaloge 9739 Dobavni rok takoj, prodaja vmes možna Chedpfx Aaowirurjhjb Država porekla Turčija Cena 22300 € Leasing obrok 428,16 € Prodajni hit 1 Na zalogi 1 Dolžina upogibanja 2030 mm Maks. zmogljivost upogibanja - konstrukcijsko jeklo 6 mm Maks. debelina pločevine brez pred-upogiba - konstrukcijsko jeklo 6 mm Maks. debelina pločevine z upogibanjem - konstrukcijsko jeklo 5 mm Premer zgornjega valja 170 mm Moč motorja 4 kW Dolžina 3600 mm Širina 1020 mm Višina 1120 mm Teža 2400 kg 3 valji Asimetrična postavitev valjev - s pred-upogibanjem 2 gnana valja Motoriziran pomik stranskega in stiskalnega valja Digitalni prikaz položaja stranskega in stiskalnega valja Zgornji valj se nagne naprej Tek naprej/nazaj Utrjeni valji Premični upravljalni pult Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolična slika)

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Chsdpfx Aaeypbp Dehsb Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Codeypbqhspfx Aahehb Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Chjdpfx Ajypbp Rsahob Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Chodpfx Aoypbquoahob Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €153,200 Leasing rate: €2,895.48 Working width: 1350 mm Sheet thickness range – mild steel: 0.4 – 120 mm Abrasive belt dimensions: 1370 x 2200 mm Extraction capacity: 6000 m³/h Connection for extraction: Diameter 150 mm Compressed air connection: 6 bar Length: 4200 mm Width: 2300 mm Height: 2350 mm Weight: 4200 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X BRUSH UNIT ABOVE * The machine is built from welded and normalized steel to ensure a stable and rigid structure. * Worktable with motorized height adjustment enabled by synchronized movement of 4 screws. * Independent motors with emergency brakes integrated within the machine frame. * Dust extraction hoods within the machine. The control panel includes: * Automatic star-delta starter for main motors * Digital display for material thickness with decimal accuracy * Thickness adjustment with control (+/- 0.1) * Alarm control center for immediate visualization of emergencies and/or faults. FEED UNIT Csdjynmw Rjpfx Aahshb * Table constructed of a solid metal structure with a ground and wear-resistant gliding surface. * Modified structures for vacuum systems available on request * Table lifts and lowers from 780 mm to a maximum height of 950 mm above floor level. Table height adjustment motor output: 0.25 kW. * Maximum permissible load on the table: 140 kg. * Variable feed speed via inverter from 0.4 to 4.5 m/min, optional: 0.2 to 2.0 m/min or 0.6 to 6.0 m/min. * Conveyor belt made of special natural rubber, oil- and heat-resistant, with automatic centering system. * Side guides preventing the conveyor from lifting. * Rubberized pressure rollers, oil- and heat-resistant, fitted before and after each working unit. * Automatic centering device for the conveyor belt * Automatically servo-cooled motor * Speed motor displayed on the main touchscreen 1ST DEBURRING UNIT WITH ABRASIVE BELT * Rectified and balanced contact roller, 180 mm diameter. Coated with oil- and heat-resistant nitrile rubber. Standard roller hardness 55° Shore. Mounted on an eccentric shaft, allowing control of working position and compensation for abrasive belt wear, up to 8 mm. This system is controlled by a pneumatic cylinder which enables the group to be engaged automatically and, in the event of an emergency and/or machine stop, allows immediate withdrawal of the belt from the working area. Abrasive belts and/or Scotch-Brite can be mounted. * Pneumatic ON/OFF switch. * Roller adjustment up/down ("grain" stroke 10 mm) * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotational speed in feed direction: 4 – 18 m/s. * Adjustable width and duration of oscillation. * Pneumatic abrasive belt tensioning system. LED indicator for wear control. * Abrasive belt centering system with electronic photo cell indicator; amplitude and intensity of oscillation adjustable. 2ND ROTARY BRUSHING UNIT * Consisting of 8 deburring brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and...

Stanje: novo, Širina pločevine 2050 mm Debelina pločevine 4,5 mm Upogib 4,0 mm Najmanjši premer 210 mm Premer valjev 140 mm Teža stroja ca. 1530 kg Dimenzije ca. 3220x1200x900 mm Standardna oprema: - Osrednji valji poganjani z elektromotorjem, krožnim menjalnikom in zobniškim pogonom - Zgornji valj se lahko iztegne bočno Cedpfx Asyvvrbeahshb - Glavni motor z zavorno napravo - Naprava za stožčasto krivljenje - Mobilna upravljalna konzola in stopalka - CE oznaka/izjava o skladnosti Dodatna oprema: - Motorni premik zadnjega valja - Digitalni prikaz za zadnji valj - Indukcijsko kaljeni valji

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 700 mm, največja hitrost vretena: 1.500 obr/min, hitrost vretena (min.): 5 obr/min, dolžina podajanja os X: 1.200 mm, dolžina pomika po osi Y: 2.000 mm, dolžina podajanja os Z: 700 mm, hitrost pomika os X: 1.000 m/min, hitrost podajanja osi Y: 1.000 m/min, hitrost podajanja os Z: 1.000 m/min, skupna širina: 4.000 mm, San Rocco horizontal boring mill, fully overhauled, from a high-quality aerospace manufacturing operation. CNC control system: Siemens SINUMERIK 840D with SIMODRIVE 611 drive system. The machine is equipped with modern digital drives and is suitable for high-precision multi-axis machining in continuous operation. The machine was overhauled in 2024 and received brand new telescopic covers on all axes, as well as numerous additional minor but essential refurbishments to the hydraulics, CNC control, hoses, and all types of seals. The machine is comprehensively equipped with coolant system, etc. Travel distances: Chedpox Rhlcjfx Aahjb X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle data: Boring spindle diameter: 100 mm Tool holder: ISO 50 Milling spindle diameter: 185 mm Spindle axial stroke: 700 mm Feeds and rapid traverses: Automatic feed, spindle and vertical axis: 2 × 1,000 mm/min Rapid traverse, spindle and vertical axis: 5,500 mm/min Clearances: Min. spindle height above table: 0 mm Max. spindle height above table: 1,500 mm Maximal distance spindle nose to table center: 1,850 mm Spindle speeds: Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gear stages: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table data: Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table feeds: Automatic feeds X and Y: 1,000 mm/min each Rapid traverse X and Y: 5,500 mm/min each Table rotation: Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive system: Siemens SIMODRIVE 611 E R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting & transport data: Group 1: Steel bar, diameter 70 mm, length 1,600 mm Steel bar, diameter 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel cables, diameter 22 mm Weight approx. 12,500 kg Group 2: Two steel cables, minimum diameter 18 mm Weight approx. 3,500 kg Group 3: Manual lifting Weight approx. 1,300 kg Condition: The machine is in very good technical condition and can be inspected and tested under power by appointment.

Stanje: rabljeno, Technical Details: Sheet width: 1080 mm Sheet thickness: 1.25 mm Frame spacing: 1200 mm Dimensions (LxWxH): 1.9 x 0.6 x 0.9 m Additional features: 2x Bending rollers: -Ø 63 x 1080 mm -the top roller is swiveling -the bottom roller has an adjustment travel of 12 mm -manual drive via hand crank 1x Guide roller: -Ø 63 x 1080 mm -idle running Codpfx Aaou Icdyehjhb -adjustment travel approx. 5 mm

Stanje: rabljeno, Tehnične podrobnosti: Chodou Ngfqepfx Aahsb Debelina pločevine: 10 mm Debelina materiala: 4,5 - 10 mm Moč: 2000 Watt Obratovalna napetost: 220 V s 4-metrskim kablom Približna teža stroja: 18 kg Dimenzije stroja: D: 550 x Š: 120 x V: 260 mm OBLIKOVALEC VARILNIH ROBOV – POSNEMALNI STROJ ali ŠKARJE ZA PLOŠČE v kovčku Ročna naprava Uporaba: rezanje in zareza ploščatih obdelovancev Debelina materiala je odvisna od vrste materiala (max. 10 mm) Orodje = spodnji nož (matrica) in zgornji nož (štancek) posamezno z dodatno opremo kot na sliki, za 200,00 evrov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, dvojna ekstruderja z vijačnimi gredi, zmogljivost 300–500 kg/uro, material PE motor s 110 kW Codpfezkk Nbjx Aahjhb

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 300-M270100, Schüco PBS profile machining centre – 5-axis CNC, year of manufacture 2003, immediately available TECHNICAL DETAILS X-axis: 6,650 mm Y-axis: 800 mm Z-axis: 500 mm Feed rate X-axis: 0–40 m/min Rapid traverse X-axis: 40 m/min Feed rate Y and Z axes: 0–30 m/min Rapid traverse Y and Z axes: 30 m/min B-axis rotation: 0–90°, continuous C-axis rotation: 0–360°, continuous Cjdpjxr N Rmofx Aahehb Rotation speed B and C axes: 10,000°/min Positioning accuracy within a macro (max. 300 mm): ±0.1 mm Positioning accuracy over a length of 6,000 mm: < ±0.15 mm MILLING Maximum tool dimensions for milling/drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disk milling cutters: Ø 300 mm Maximum spindle motor power: 7 kW Spindle motor power for disk milling: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp-to-clamp) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 Total machine weight: 6.5 t WORKING AREA Number of clamping blocks: 8 pcs Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with max. tool length: 300 mm x 230 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Večnamenski portal WMS120 je CNC-stroj za avtomatizirano obdelavo lesenih elementov (stene, strehe in stropi). Dolžina stroja (os X): pribl. 3.000 mm Širina stroja (os Y): pribl. 6.200 mm Cjdpsza D Taofx Aahjhb Višina stroja (os Z): pribl. 3.000 mm Obdelovalna širina elementa: pribl. 3.400 mm Set orodij za WMS menjalnik orodij, sestavljen iz: - 1x univerzalni grobi rezkar - 1x žagarska enota - Marker z tehnologijo krogličnega pisala Prijemne in montažne enote 2+2 spenjalna aparata Haubold - 2024 nov računalnik z Windows 10

Stanje: zelo dobro (rabljeno), Leto izdelave: 1974, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 3.000 mm, dolžina pomika os W: 2.000 mm, premer vretena: 160 mm, obremenitev mize: 25.000 kg, CNC-vrtalno-frezalni stroj – Scharmann Csdpezvw Ihsfx Aahohb Proizvajalec: Scharmann Model: WFT 160 (začetek 1970-ih) Nadzorni sistem: Bosch CC300 Delovna miza: 2000 x 2500 mm Dolžina giba mize v vzdolžni smeri: 4600 mm Dolžina giba mize v prečni smeri: 2000 mm Dolžina giba vretena v navpični smeri: 3000 mm Največja obremenitev mize: 25 ton

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, LVD PPEB 110/20 MNC 95 Press Brake Good condition Machine manual included Csdpov Er T Uefx Aahjhb Machine weight: approx. 9,480 kg Width: 3,600 mm Length: 2,700 mm Height: 3,000 mm

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Clamping range: 25 mm ID to 120 mm OD Electric drive: 1050 W, 230 V, 50 Hz Tool holder speed (no load): 150 rpm, nominal: 70 rpm Clamping with wrench Manual tool feed Weight approx. 6.5 kg Includes operating manual Chedpfx Aasvr Ec Aohjb Supplied in wooden case Incl. 1 facing tool (90°) and 2 beveling tools (30°)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1711, Ta industrijska večrezilna linija za obdelavo hlodovine (večglava krožna žaga) je zasnovana za obdelavo velikih količin hlodovine in lesa. Konstruirana je na robustnem jeklenem okvirju, stroj ima zelo učinkovito konfiguracijo z 8 rezilnimi glavami, pri čemer je vsaka posamezna rezilna enota opremljena z lastnim električnim motorjem za maksimalno zmogljivost. Stroj je opremljen z motorji z močjo 15 kW. Stroj uporablja standardne žage velikosti 38 mm x 5025 mm. Ključna tehnična prednost te linije je njena vsestranskost: vsako drugo rezilno glavo je mogoče nagibati do 30 stopinj. Ta posebna funkcija omogoča stroju, da reže diagonalne deske (deske s poševnim robom/oblogo) širine do 175 mm. Dovajanje materiala izvaja robustna jeklena transportna linija z verigo, ki zagotavlja stabilno in natančno pozicioniranje lesa med celotnim procesom rezanja. Izdelano v Latviji, popolnoma pripravljeno za neprekinjeno profesionalno delovanje žage. Stroj je še vedno priključen in ga je mogoče vključiti. Cedpszudynsfx Aahshb

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, delovna širina: 1.525 mm, najv. debelina pločevine: 100 mm, skupna masa: 6.400 kg, La série 42 offre la solution pour les fabricants qui fournissent des produits de qualité supérieure. Cette qualité exceptionnelle est obtenue grâce à un agrégat de brosses multirotatives doté de 8 brosses lamellaires abrasives, qui assurent un ébavurage uniforme et un arrondi parfait des arêtes du métal. Machine à brosses rotatives multidirectionnelles (RB), pour l’ébavurage homogène et la finition des pièces planes en tôle. Un traitement complet en un seul passage, la surface de la pièce étant dotée d’une finition de surface non directionnelle. Équipée d’un ou plusieurs agrégats à bande abrasive (W) pour le pré-ébavurage et la finition fine. Agrégat à brosse coupelle (TB) pour l’ébavurage, la cassure d’arêtes, la finition non directionnelle ou l’élimination de la calamine. Cedpfoxw Ih Uex Aahshb - Agrégat à bande abrasive (auto-étalonnant) - Agrégat à brosse coupelle (auto-étalonnant) - Agrégat à brosses rotatives avec 8 brosses (auto-étalonnant)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, delovna širina: 1.100 mm, najv. debelina pločevine: 100 mm, Serija 32 RB ponuja rešitev za proizvajalce, ki zagotavljajo izdelke v vrhunski kakovosti. Ta visoka kakovost se doseže z večrotacijskim krtačnim agregatom s štirimi abrazivnimi lamelnimi ščetkami, ki enakomerno odstranjujejo robove (odiglujejo) in popolno zaokrožijo robove kovine. Večsmerni rotacijski brusni stroj s krtačami (RB) omogoča enakomerno odstranjevanje robov in fini brus ploščatih kovinskih delov. Postopek omogoča enostransko obdelavo v enem prehodu, pri čemer je površina dela obdelana z brezsmernim površinskim finišem. Opremljeno je z enim ali več brusnimi tračnimi agregati (W) za predhodno odstranjevanje robov in fini brušenje. Chodexw Ikcspfx Aahjb - Brusni tračni agregat - Rotacijski krtačni agregat (samokalibrirajoč) - Brusni tračni agregat

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Wema Probst QF50 cross-processing machine Cross milling machine for processing round timber, featuring a tilting table for setting the milling angle. 2x processing stations 1x cross-milling unit 1x drilling unit Codpfewc Tdnsx Aahjhb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, delovna širina: 450 mm, Oprema: varnostna svetlobna zapora, TEHNIČNI PODATKI Delovna širina: 450 mm (omejena obdelava možna do 520 mm) OPREMA - Varnostna svetlobna zavesa - Žaga - Univerzalni rezkar z valjčnim rezkalom - Lastovičji rep rezkar - Prstni rezkar - Vrtalna agregata 1x horizontalno + 2x vertikalno - Naprava za rezkanje utorov - Označevalec na strani prislona - Avtomatska postaja za obračanje tramov - Dolžina lesa za obdelavo v podajalniku zdaj do 16 m - Krmilni računalnik s programom EKP je priložen Csdpfjyfhi Nex Aahohb

Stanje: dober (rabljeno), Leto izdelave: 2007, Originalna Heidelberg upogibna naprava do formata 102 Csdpszg Uvqjfx Aahehb

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1971, Prodam to štirivaljno krožno stiskalnico tipa VRM HY 3000/18 Priključena, možen preizkus Cedjxwqdrepfx Aahohb Teža 24.000 kg

Stanje: zelo dobro (rabljeno), Product information: "POLY-PTX 800 Satin Finishing Machine" From the inventor of the longitudinal grinder. Our multifunctional longitudinal grinder featuring a 1750 W motor, variable speed control, ergonomic design, and versatility—also suitable for working widths up to 150 mm. High torque and power reserves ensure professional, continuous operation and enhanced profitability. Features: - Infinitely variable speed adjustment from 1000 to 3800 min⁻¹, with a tachogenerator ensuring constant speed even under load. - Grinds from coarse to the finest grades. - Balanced, straightforward manual guidance without support rollers. This enables free movement (oscillation effect). Guarantees shadow-free, seamless, highly decorative surfaces in satin, matte, and industrial finishes. - Satin finishes, mirror-polishes, and enhances stainless steel, steel, non-ferrous metals such as brass, bronze, copper, aluminium, as well as wood. - Ultra-fine grinding on large surfaces without shadows or edges. - Removes welds, deep scratches, rust, dirt, paint layers, and oxides. - Achieve everything from rough grinding to mirror polishing of stainless steel and non-ferrous metals in just three steps. Cjdpfx Aaeu Su Tzshehb - Also ideally suited as a tube/pipe grinder using a belt roller attachment. - Grinds and polishes open and closed tubular structures. - For pipe processing, the “hole system” enables safe and rapid connection of non-woven and felt belts to closed tubular structures. No complicated adhesive bonding required. - Extensive selection of grinding tools offering a solution for every task. - Rubberized handle for optimal operation! Scope of delivery: - 1 POLY-PTX® 800 base unit - 1 robust, impact-resistant plastic carry case - 1 QUICK-LOCK 4 m cable - 1 POLY-PTX® clamping screw - 1 non-woven wheel, 100 mm width Device type: Satin finishing machine Cord/battery: Corded Compatible tools: Brushes, sleeves, polishing rings, wheels Plug/power connection type: EU (C+F) 220–240 V ~ 50–60 Hz Power consumption: 1750 watts Max. tool dimension: Diameter 115 x width 100 mm Tool holder: 19 mm splined shaft WEEE reg. no: DE 51395731 Speed (min⁻¹): 1000 - 3800

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, skupna masa: 12.000 kg, vhodna napetost: 415 V, vhodni tok: 70 A, vhodna frekvenca: 50 Hz, Popolna proizvodna linija Rademaker za izdelavo pite iz leta 2010, ki je sposobna proizvesti do 5.280 nadevane slane pite (z zamaškom) na uro. Proizvajalec – Rademaker B.V. Največja mehanska hitrost – do 22 udarcev/minuto. Proizvodna zmogljivost – do 5.280 pit na uro. Električne zahteve – 415 V / 50 Hz / 3-fazni sistem. Cjdpfx Aaszvmy Hehehb Moč – 70 amperov (približno). Teža celotne linije – 12.000 kg. Ta proizvodna linija obsega naslednjo opremo/stroje: 1. 2 kompleta orodij, vključno s podstavki, en komplet za pite s premerom ohišja 110 mm. 2. Električna upravljalna plošča (z nalepko »PIE LINE«). 3. Nagnjen transportni trak za nalaganje plasti testa. 4. Transportni trak nad linijo (uporablja se za dovajanje v »STRIPFEEDER«), ki deluje v višini 2,4 m po dolžini linije. 5. Rademaker »STRIPFEEDER« z odklopnikom za spuščanje ohišij pite. 6. Rademaker enota za stiskanje 1 (uporablja se za stiskanje testa v obliko, ki ustreza ohišju pite). 7. Rademaker »DEPOSITOR« 6-kanalni sistem za doziranje z lijem in črpalko. 8. Rademaker »TAMPING UNIT« 2 za stiskanje nadeva v ohišja. 9. Rademaker »LID DOUGH CONVEYOR« za spuščanje zamaškov na nadevano pito. 10. Dutch Thermal Engineering b.v. (DTE) termostat V-009.0 za uravnavanje temperature vodne kopeli, ki se nahaja pod glavnim transportnim trakom in podpira ohišja pite. 11. Rademaker enota za zapiranje/označevanje za vtiskanje vzorca na zamašek ohišja in zagotavljanje, da je zamašek varno pritrjen na pito. 12. Rademaker izhodni/izpustni transportni trak za pite. 13. Rademaker »DOUGH RETURN SYSTEM« za odvečno količino testa. 14. Rademaker »SPOT DEPOSITOR« za doziranje v 5 vrsticah čez linijo. 15. Neoznačena posoda za mešanje in črpalka za glazuro iz jajc, nameščena na mobilnem podstavku. OPOMBE – KUPEC MORA OPREMO ODSTRANITI Z LOKACIJE.