Schneider Electric Odklopnika nakup rabljenega (28.448)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et50-neu-löwa, kapaciteta rezervoarja: 50.000 l, 50m³ underground tank cistern, brand new according to DIN-EN 12285-1, Single-walled, raw interior, externally professionally insulated. Dimensions: D = 2.50 m - L = approx. 10.70 m The tank is equipped with a DN 600 manhole including dome cover, bolts, and gasket. Upon request, the tank can be fully equipped with a fire-fighting water suction connection, bringing the tank in line with DIN 14230 requirements for underground fire-fighting water tanks. Fire-fighting water suction connection / suction pipe in stainless steel V2A – as per DIN 14230 – comprising: - 1 pc. DN125 suction pipe made of stainless steel V2A, with Storz A fixed coupling and Storz A blank coupling, - 1 pc. DN100 vent pipe with hood in stainless steel V2A, - 1 pc. anti-vortex plate mounted on suction line, - 1 pc. sign "Fire Water Extraction Point", - 1 pc. dip tube with gauge rod for measuring fill level, - 1 pc. dome cover with bolts and gasket. The suction pipe can be used both as a fill and extraction pipe. All components are pre-assembled for installation – ex works – If required/desired: Installation of an above-ground fire water suction connection in accordance with DIN 14244 – Form B, Including A fixed coupling to DIN 14319 and A cover cap to DIN 14319. Housing made of cast iron – exterior coated with epoxy resin. Optional: Complete interior sandblasting and application of a potable/fire water coating. Tank ex works, loaded and ready for transport. General: You will receive an invoice with shown VAT. The purchase is subject to our general terms and conditions. Cjdped Tmaqofx Af Dogu Other tank systems (new and used) as well as rental units are also available! Furthermore, we purchase existing tank systems and are able to properly empty, clean, dismantle, and transport them with certified specialist company qualification in accordance with the German Water Resources Act (§ 62 WHG).

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et50, kapaciteta rezervoarja: 50.000 l, Storage tank with 50,000-litre capacity for the storage of service water / fire-fighting water or for use as an irrigation tank, sports field irrigation, etc. Dimensions: Diameter = 2.50 m - Length = approx. 10.70 m The tank is pre-owned, internally emptied and professionally cleaned, and externally coated with a bitumen layer / bitumen insulation. Minor insulation damage from disassembly and transport may be present on the tank. Price ex Söhrewald – loaded, free of charge – For use as a fire water tank, we can equip the tank completely with a fire brigade suction connection: consisting of: - 1 pc. suction pipe DN125, stainless steel - V2A, with Storz A-fixed coupling and Storz A-blank coupling, - 1 pc. vent pipe DN100 with hood, stainless steel - V2A, - 1 pc. anti-vortex plate mounted on the suction pipe, - 1 pc. sign "Fire water extraction point", - 1 pc. dip tube with dipstick for fill level measurement, - 1 pc. tank access cover with screws and gasket. The suction pipe can be used both as a fill and extraction pipe. All components are supplied ready for installation – ex works – If requested/required: Installation of a fire water suction connection, above-ground, to DIN 14244 - form B, incl. A-fixed coupling according to DIN 14319 and A-cover cap according to DIN 14319. Housing made of cast iron – with external epoxy coating. General information: Cgsdpfxscydt Ue Af Dsu You will receive an invoice with VAT shown separately. The purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental units are also available! Furthermore, we purchase existing tank systems and, as a certified specialist company according to the Water Resources Act (§ 62 WHG), can professionally empty, clean, dismantle, and transport them away.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 20.000 l, Diesel fuel station – Home fuel station – Tank system – Small fuel station consisting of: 1 x 20,000 L storage tank – brand new 1 x eco 75 fuel dispenser – brand new Description of steel tank: 20,000 liter capacity, compliant with EN 12285-2 Class B (replacing DIN 6616), aboveground, double-walled, including test certificate. Approved for installation in seismic zone 0 areas. Csdpfxsi Artle Af Djgu The tank features two saddle feet, a manhole with dome cover, and is equipped with the following fittings: - 1 fill pipe with TW closure (fill cap) and dip tube - 1 gauging pipe with dipstick and dipstick cap - 1 vent pipe with vent cap - 1 brand new overfill prevention device with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detector with type approval and leak fluid The tank is externally sand-blasted, primed, and painted in RAL 7011 iron grey. (Other RAL colours available for an additional charge.) Dimensions: L ≈ 6.90 m + 0.70 m (console) | D = 2.00 m | Weight ≈ 4.2 tonnes | Ex works, loaded free of charge Description of dispenser: type eco 75 – not suitable for calibration, Delivery rate up to approx. 75 l/min, suitable for diesel fuel, includes: - Automated fuel management terminal with myTecalemit-Cloud connectivity - Web-based tank data management software – basic module - 2 ID systems (driver/vehicle) for up to 4,000 users - Identification via transponder technology - USB interface for data retrieval - Vane cell pump with single-phase asynchronous motor – 230V - Oval gear meter with pulse output, accuracy ≈ +/- 0.5% - Angle seat filter / dirt filter with fine mesh - 4 m delivery hose DN 25 with type-approved automatic dispensing nozzle, incl. swivel joint and hose holder - Nominal suction height: approx. 3.5 m / max. suction line length = 6.0 m - Robust powder-coated sheet steel housing - Dimensions: approx. 1,410 x 520 x 275 mm - Two-line illuminated monochrome display, character height 8 or 19 mm - Tank data memory for up to 10,000 delivery records - Menu navigation in German, English, and French Magnetic keys / transponders are additionally required: General: The quoted price for the fuel station is ex works Söhrewald near Kassel, loaded free of charge. (Delivery can be offered at a competitive additional cost.) You will receive an invoice including VAT. Purchase is subject to our general terms and conditions. Other tank systems (new and used), as well as rental units, are also available! In addition, we purchase existing tank systems and can professionally empty, clean, dismantle, and remove them as per certified specialist qualifications according to the German Water Resources Act (§ 62 WHG).

Stanje: novo, Leto izdelave: 2026, Diesel tank - Heating oil tank - Tank system - Steel tank Factory new - with a capacity of 30,000 liters - compliant with EN 12285-2 - Class B (replacement for DIN 6616), above-ground, double-walled, incl. test certificate, suitable for installation in seismic zone 0 regions. The container is equipped with two saddle supports, a manhole with domed cover, and is fitted with the following accessories: 1 filling pipe with TW cap (filling cap) and dip pipe, 1 gauging pipe with dipstick and dipstick seal, 1 vent pipe with vent cap, 1 factory-new overfill prevention device with type approval (AIII), Cgodpfxoi A Hw Re Af Dsu 1 ladder as well as 1 spare socket for withdrawal purposes, 1 optical leak detection device with type approval and leak detection fluid. The outer surface of the tank is sandblasted, primed, and painted in RAL7011 iron grey. (Other RAL colors available upon request.) L = approx. 10.00 m - D = 2.00 m - Weight approx. 5.9 t - ex works, loaded free of charge General Information: You will receive an invoice with VAT shown separately. The purchase is subject to our general terms and conditions. Further tank systems (new and used) as well as rental units also available! In addition, we purchase existing tank systems and, with certified specialist company qualification according to the Water Resources Act (§ 62 WHG), can professionally empty, clean, dismantle, and transport them away.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Heating Oil Tank – Storage Container – Diesel Tank 5,000 liters capacity – brand new – compliant with EN 12285-2 – Class B (replacement for DIN 6616), aboveground, double-walled, incl. inspection certificate, suitable for installation in seismic zone 0 areas. The tank is fitted with two saddle supports, a manhole with dome cover, and is equipped with the following fittings: - 1 fill pipe with TW cap (filling cap) and dip pipe - 1 gauge pipe with gauge rod and gauge rod closure - 1 vent pipe with vent cowl - 1 brand-new overfill prevention device with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detection device with type approval and leak detection fluid The external surface of the tank is sandblasted, primed, and painted in RAL 1018 zinc yellow. (Other RAL colors available, e.g. RAL 7011 iron grey) Cedpfx Asi Ar D Sef Degu L = approx. 2.80 m – D = 1.60 m – Weight approx. 1.5 t – ex works, loaded free of charge The tank is suitable for storing HVO (Hydrotreated Vegetable Oil). General: You will receive an invoice showing VAT. The purchase is governed by our general terms and conditions. We also offer additional tank systems (new and used) as well as rental units! Furthermore, we purchase existing storage tank systems and, with certified specialist qualification according to the German Water Resources Act (§ 62 WHG), can professionally drain, clean, dismantle, and transport them.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Liquid Fertiliser / AHL / ASL – Storage Tank Container Holding Tank Storage Vessel 100,000 litre capacity – brand new – above-ground, made from steel plate. The tank complies with DIN-EN 12285-2 (formerly DIN 6616-D), features 2 saddle supports, an access ladder, and is externally primed – supplied with untreated sheet metal. D = 2.90 m – L = approx. 16.00 m. The tank is fitted with a brand-new internal plastic lining, including a leak detection unit installed in a protective box – see sample photo. The plastic lining has a "General Building Authority Approval" and is therefore suitable and approved for the storage of liquid fertiliser AHL as well as NOx reduction agent AUS 32 (AdBlue). The price is ex works – loaded free of charge. (Delivery can be offered at an economical additional cost.) Our recommendation: Sandblast the tank exterior, apply primer, and completely repaint – traffic grey / RAL colour. (Other RAL colours available upon request!) ASL (ammonium sulphate solution) is a highly sought-after liquid fertiliser, produced during the drying process of liquid fermentation residues and air scrubbing in drying plants. Due to the corrosive properties of the storage medium, ASL tanks require an internal plastic lining. Important: The tank shown (sample photo) is a refurbished 100,000 litre tank which has already been delivered to a customer. The plastic piping (PVC connection) is not included in the scope of delivery and can be purchased at additional cost. General Information: You will receive an invoice with VAT shown separately. The sale is subject to our general terms and conditions. Other tank systems (new and used), as well as rental units, are also available! In addition, we buy existing tank systems and can professionally empty, clean, dismantle, and remove them with certified specialist company qualification in accordance with the Water Resources Act (WHG). ===== For further enquiries, please contact: ===== Alfred Schneider GmbH & Co. Tankbau KG Mr. Heß / Mr. Jakob Tiefenrod 2 Csdpoi A Hxvsfx Af Dogu 34320 Söhrewald near Kassel / Hesse =====

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 100.000 l, Diesel Tank – Heating Oil Tank – Tank System – Steel Tank – Diesel Storage – Storage Vessel Brand New – 100m³ Capacity – Compliant with EN 12285-2 – Class B – (Replacement for DIN 6616), Above-ground, double-walled, including inspection certificate, Suitable for installation in seismic zone 0 areas. The tank is equipped with two saddle feet, a manhole with dome cover, and the following fittings: - 1 fill pipe with TW cap (filling cover) and dip pipe - 1 measuring pipe with level gauge and closure - 1 vent pipe with ventilation hood - 1 brand new overfill prevention device with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detector with type approval and leak detection fluid The tank’s exterior is sandblasted, primed, and painted in RAL7011 iron grey. (Other RAL colours available at surcharge.) L = approx. 15.80 m – D = 2.90 m – Weight approx. 19.0 t – Ex works, loaded free of charge – (For transport reasons, the dome cover and fittings are supplied loose and must be installed on site!) General: You will receive an invoice with VAT shown. Codoi A Hx Iopfx Af Djgu Purchase is subject to our general terms and conditions. Further tank systems (new and used) as well as rental units are also available! In addition, we purchase existing tank systems and, as a certified specialist company in accordance with the Water Resources Act (§62 WHG), can professionally empty, clean, dismantle, and remove them.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: eco-55, Fuel dispenser with data acquisition pump, eco-55 Type eco 55 – not suitable for calibration, Flow rate up to approx. 55 l/min, suitable for diesel fuel, incl. - Fuel management terminal connected to myTecalemit cloud - Incl. web-based fuel data management software – Basic module – - 2 identification systems for driver/vehicle for up to 4,000 users - Identification via transponder technology - USB interface for data retrieval - Vane cell pump with single-phase asynchronous motor – 230 Volt - Oval gear meter with pulse emitter, accuracy approx. +/- 0.5% - Angle seat filter / dirt filter with fine mesh - 4 m dispensing hose DN 19 with type-approved automatic nozzle, incl. swivel joint and hose holder - Nominal suction height up to approx. 3.5 m / max. suction line length = 6.0 m - Robust powder-coated steel sheet housing Dimensions: approx. 1,410 x 520 x 275 mm - Graphic display, illuminated - Fuel data memory for up to 10,000 dispensing records - Menu navigation in German, English, and French Magnetic keys/transponders are required in addition. Alternatively, this dispenser is also available with a capacity of 75 l/min. The dispenser can be delivered for an additional charge. General: Cgjdpsd Tc I Defx Af Dju You will receive an invoice showing VAT. The purchase is subject to our general terms and conditions. Further tank systems (new and used) as well as rental units are also available! In addition, we also purchase existing tank systems and can professionally drain, clean, dismantle, and transport them with certified specialist company qualification according to the German Water Resources Act (§ 62 WHG).

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et100-neu-löwa, 100,000 Litre Firewater Tank – Underground Storage Tank – Retention Tank According to DIN-EN 12285-1, Tank Class A, suitable for media up to 1.1 kg/dm³, single-walled, interior bare steel, exterior with professional insulation. Tank suitable for installation in walkable areas (not suitable for vehicular traffic). Dimensions: D = 2.90 m – L = approx. 15.80 m The tank is equipped with a DN 600 manway with dome cover, bolts, and gasket. Tank ex works, loaded free of charge On request, the tank can be fully equipped with a firewater suction connection, meeting the requirements of DIN 14230 – Underground Firewater Tanks: Firewater Suction Connection / Suction Line made of V2A stainless steel, according to DIN 14230, comprising: - 1 piece suction line DN125 made from V2A stainless steel, with Storz A-coupling and Storz A-blank cap - 1 piece vent pipe DN100 with stainless steel V2A hood - 1 piece anti-vortex plate mounted on suction line - 1 piece information sign "Firewater Extraction Point" - 1 piece dip pipe with measurement rod for level monitoring - 1 piece dome cover with bolts and gasket The suction line can be used as both filling and extraction pipe. All components are supplied ready for installation – ex works – If required/desired: Installation of an above-ground firewater suction connection, according to DIN 14244 – Form B, including A-coupling according to DIN 14319 and A-cover cap according to DIN 14319. Housing made of cast iron – exterior with epoxy resin coating Optional: Tank interior can be completely sandblasted and coated for service water/firewater application. The tank is suitable as a water tank, firewater tank, firewater retention tank, rainwater retention tank, retention tank, rainwater storage, retention cistern, cistern, etc. General: You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. Cgsdpfx Afed Tc Nus Dou We also offer other (new and used) tank installations and rental units! Furthermore, we buy existing tank systems and can, with certified specialist qualifications according to the German Water Resources Act (§ 62 WHG), properly drain, clean, dismantle, and remove them.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Underground Tank, Firefighting Water Tank, Steel Storage Tank with a 30,000 Liter Capacity for the Storage of Process Water / Firefighting Water. Dimensions: Diameter = 2.00 m - Length = approx. 10.00 m The tank features a DN 600 manhole with domed cover, is used, internally emptied and professionally cleaned, and is externally coated with bitumen insulation/bitumen coating. The tank includes a permanently welded dome shaft made from steel sheet, including a walkable cover. Shaft dimensions: approx. 900 x 900 x 1,000 mm (width x depth x height) Minor insulation damage from removal and transport may be present on the tank. Price ex works Söhrewald – loaded, free of charge – For use as a firefighting water tank, we can fully equip the tank with a fire brigade suction connection, consisting of: - 1 pc. suction pipe DN125 made of stainless steel (V2A), with Storz A-fixed coupling and Storz A-blank cap, - 1 pc. DN100 vent pipe with hood, made of stainless steel (V2A), - 1 pc. anti-vortex plate mounted on the suction pipe, - 1 pc. sign "Firefighting Water Extraction Point", - 1 pc. dip tube with dipstick for measuring filling level, - 1 pc. dome cover with bolts and gasket. The suction pipe can be used as both a fill and extraction line. Cgodpfei Ary Sox Af Dsu All components are supplied ready for installation – ex works – If required: Installation of a fire brigade suction connection, above ground, in accordance with DIN 14244 - Form B, including A-fixed coupling as per DIN 14319 and A-cover cap as per DIN 14319. Casing made of cast iron – externally coated with epoxy resin. General: You will receive an invoice with shown VAT. The purchase is subject to our general terms and conditions. Further tank systems (new and used) as well as rental units are also available!

Stanje: pripravljen za uporabo (rabljen), Sasaki Electric Patlite GSE-09TLY-K signal display, serial number as shown in the photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Cedpfxei Ec E Is Af Djgu

Stanje: novo, Warner Electric krogelni vretenasti pogon Skupna dolžina: 2280 mm, dolžina navoja: 2000 mm, Ø navoj: 50 mm, korak: 10 mm, Odlomek 1: dolžina: 180 mm, Ø 30/26 mm, Odlomek 2: dolžina: 115 mm, Ø 40/37,5 mm, 6-kot: SW 32 mm, razdalja med luknjami: 95 mm, Ø matice: 75 mm, Ø prirobnice: 110 mm, neuporabljen, 100% delujoč, obseg dobave skladno s fotografijami. POZOR: Stroške za pakiranje in pošiljanje prosim povprašajte posebej! Cedpfexaigwex Af Dogu

Stanje: pripravljen za uporabo (rabljen), Fuji Electric MPF 1114 G 3-Phase Induction Motor, serial number as per photo, mounting hole spacing: 152 x 152 mm, drive shaft diameter: 28 mm, used, normal signs of wear, 100% functional, scope of delivery as per images. NOTE: Please enquire separately for packaging and shipping costs! ATTENTION: Please enquire for charges for packing and transport separately! Cgodpfji D H Trjx Af Deu

Stanje: pripravljen za uporabo (rabljen), Fuji Electric MPF 1138 A 3-Phase Induction Motor, serial number as per photo, bolt hole spacing: 215 x 180 mm, drive shaft diameter: 48 mm, used, heavy signs of wear, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for packing and shipping costs! ATTENTION: Please enquire for charges for packing and transport separately! Cedpfxei D H Tvo Af Degu

Stanje: zelo dobro (rabljeno), Spindle moulder SCHNEIDER Model SK 2/4 II with Holz-Her power feed Codpfx Afsgk Ui Ee Dsgu with sliding table

Stanje: kot nova (razstavni stroj), Leto izdelave: 2015, For sale, we offer a strapping machine model TV02 from the manufacturer Schneider & Ozga. Condition: very good, like new, never used. The fully automatic strapping machine TV 02 impresses with maintenance-free direct drives and extremely easy operation. Strapping capacity of 30 single straps and 15 parallel straps per minute Strap width: 5 to 12 mm Various frame sizes available Conveyor belts with four straps Off-center strap sealing TECHNICAL DATA Performance: Up to 30 single strappings/minute Up to 15 parallel strappings/minute Package size: Width: max. 600 mm, min. 160 mm Height: max. (without press) 650 mm, max. (with press) 550 mm, min. 10 mm Package weight: max. 25 kg Strapping material: Polypropylene strap (PP strap) Cedsixz Tcopfx Af Dsgu Width: 5-12 mm Thickness: min. 0.35 - 0.70 mm Sealing type: Thermo-welded seal Strap reel: Core diameter: 200/228 mm, Outer diameter: approx. 450 mm Width: 165-210 mm Electricity: 230 V, 1 phase, 50 Hz Power consumption: 1.1 kW at 230V Pneumatics: Operating pressure: 4 bar Consumption single machine: 90 l/min. (3 l/strapping) free air Pressing pressure: 200 N (cylinder diameter 25 mm) Strap tension: max. 200 N Conveyor speed: approx. 26 - 59 m/min. STANDARD EQUIPMENT · Extraction system · Automatic strap feed · Strap detection · Infeed and outfeed cycle with connector · RAL 5007 color (brilliant blue) · Continuously adjustable table conveyor speed · Short heat-up time · Motors without mechanical brake · PLC control with four programmable settings for different products · Continuously adjustable reverse tension · Touchscreen lockable with customizable code · Strapping counter · Maintenance-free direct drives Price: €12,000 net Machine in stock, available immediately Location: 89-600 Chojnice, Poland If interested, please contact us.

Stanje: rabljeno, pneumatic angle grinder, flex, angle sander, cut-off grinder, cut-off machine, angle grinding machine - for discs: Ø 50 mm Cgedpfx Afsd R Ikas Dju - speed: max. 18,000 rpm - case including: accessories - dimensions: 430/360/H90 mm - weight: 2.2 kg

Stanje: rabljeno, Auxiliary circuit breaker, circuit breaker, fuse, miniature circuit breaker, circuit protection device, control module, standard control unit, direct starter, reversing block, reversing unit, base device -LUCB12 BL: Control unit -LUB12: Base device -Price: per piece -Quantity: 27 pieces -Dimensions: 155/45/H125 mm -Weight: 0.9 kg/piece Cgedpfx Aeff Sqajf Dju

Stanje: rabljeno, Auxiliary circuit breaker, circuit breaker, fuse, disconnect switch, miniature circuit breaker, control module, standard control unit, direct starter, reversing module, base unit -LUCB05BL: Control unit -LUB12: Base unit -Price: per unit Cgjdpoff Sqbjfx Af Dsu -Quantity: 16 units -Dimensions: 155/45/H125 mm -Weight: 0.9 kg/unit

Stanje: rabljeno, Auxiliary switch, circuit breaker, fuse, line switch, miniature circuit breaker (MCB), control module, standard control unit, direct starter, reversing module, reversing block, base unit Cgodpfx Aogk Dzbjf Dsu -Manufacturer: Schneider, control module -Control unit: LUCA 12BL -Base unit: LUB12 -Dimensions: 170/45/H125 mm -Weight: 0.9 kg

Stanje: rabljeno, Auxiliary circuit breaker, circuit breaker, fuse, line circuit breaker, miniature circuit breaker, control module, Cgsdpfxeffukqe Af Dou standard control unit, direct starter -LUCA 12 BL Standard control unit: 5 pieces -LUB12 direct starter basic device: 5 pieces -Wöhner: terminal plate -Price: complete -Dimensions: 395/240/H220 mm -Weight: 8.1 kg

Stanje: rabljeno, Auxiliary circuit breaker, circuit breaker, fuse, circuit switch, miniature circuit breaker, control module, standard control unit, direct starter, reversing block, reversing contactor, base unit -LUCA 1XBL: control unit -LUB12: base unit -Price: per piece -Quantity: 3 pieces Cgjdpfx Afoff Sqcs Dju -Dimensions: 155/45/H125 mm -Weight: 0.9 kg/piece

Stanje: rabljeno, Proximity Switch, Cylinder Sensor, Magnetic Field Sensor Cjdpfx Afsd Tpkys Degu - Diameter: 6.5 mm, Length: 30 mm - Cable length: 2 m - Product type: IFR 06.26.15 - Quantity: 5 units available - Price: per piece - Weight: 40 g

Stanje: dober (rabljeno), PLC control, electronic module, PLC controller - Manufacturer: Schneider, PLC controller TSX Micro Cgjdjvn Ncfjpfx Af Dju - Model: TSX3710001 - Dimensions: 170 x 135 x H150 mm - Weight: 2.3 kg

Stanje: rabljeno, Power supply, converter, power provision, switch-mode power supply, DIN rail power supply, power supply unit, servo module, -Manufacturer: Pilz, power supply unit type P10 APS -Power supply unit: ELBA-electric type Euro Power ESPS835515/X -Plug-in card block: Phoenix Contact SKBI 64/H15 -Dimensions: 120/70/H190 mm -Weight: 0.5 kg/unit Cgjdpfjpk Iq Nex Af Dsu