Mass International S.r.l. Ns nakup rabljenega (14.356)

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), številka stroja/vozila: 181941, Sistem za dovod zraka: Recirkulacijski Temperaturno območje: +/- 8°C od okolice, programsko nastavljivo v razponu 19 – 30°C Upravljanje temperature: +/- 0,5°C Hladilna moč: 2000W Tipalo temperature: izhod iz integriranega tiskalniškega tipala (0 – 10V vhod za 0 – 50°C) Vhodni filter zraka: G4 (91% povprečna učinkovitost) po EN 779: 2002 Iodjhg Rcxspfx Aptjif Hladilno sredstvo: R134a, 0,75kg Polna obremenitev: 12,6A Začetni tok: 20A Frekvenca: 50 / 60Hz Napetost: 230V +/- 10% (delovno območje 207V – 253V), enofazno Akustični hrup: > 75dB Dimenzije: 1300 mm višina (+ signalna svetilka), 510 mm, 540 mm Kondenzat: zbira se v 5-litrskem rezervoarju za izpraznitev ali se odvaja v odtok Teža: 100 kg Dokumentacija ni priložena TCM je natančni modul za uravnavanje temperature, zasnovan za izboljšanje tiskovnega procesa z izjemno stabilnim in natančno nadzorovanim zrakom v tiskalnikih DEK. Delovno območje TCM omogoča širok razpon upravljanja temperature procesa glede na temperaturo okolice v tovarni. Zaradi vse bolj raznolikih aplikacij je za doseganje visoke kakovosti rezultatov pomembno, da je možno tako ogrevanje kot tudi hlajenje zraka glede na temperaturo v prostoru. Pri tisku lepil je na primer optimalna temperatura med 25 in 30°C, kar je običajno višje od klimatizirane temperature v tovarni. Kondicioniran zrak se iz TCM vodi v tiskalno območje ter se vrača po kanalih pod tiskalnikom. Oblikovanje kanalov omogoča minimalno hitrost pretoka zraka prek območja procesa, s čimer se podaljšuje lepljivost spajkalne paste in življenjska doba šablon. Zaradi optimizirane zasnove in recirkulacijskega sistema je TCM energetsko učinkovit in za delovanje potrebuje minimalno električno moč iz enofaznega omrežja. Zrak se izpihuje skozi zgornji del TCM, zato povezava z odvodnim sistemom tovarne ni potrebna. TCM se samodejno izklopi po določenem času, če je tiskalnik izklopljen ali če so pokrovi odprti. Za spremljanje temperature procesa TCM uporablja izhod tiskalnikovega integriranega temperaturnega tipala na vozičku, kar omogoča natančen nadzor in povratne informacije. Da bi preprečili kontaminacijo procesa, kondicioniran zrak pred vstopom v tiskalnik potuje skozi filter. Dodatno se možnost onesnaženja zmanjša, saj TCM vzdržuje višji zračni tlak v notranjosti tiskalnika v primerjavi z okolico, zato tujki težje vstopijo. Stanje modula je prikazano z jasno vidno štiribarvno signalno svetilko. Vsak nastali kondenzat je možno izpustiti v odtok ali pa ga zbirati v lahko izpraznljivem 5-litrskem rezervoarju. Dva senzorja spremljata nivo kondenzata in po potrebi sprožita opozorilo preko signalne svetilke. Če rezervoar ni izpraznjen, se TCM samodejno izklopi in tako prepreči razlitje. Prodajna cena: 1.900 EUR + DDV, po dogovoru, FCA Oradea, Romunija Pridržujemo si pravico do napak, sprememb in predhodne prodaje.

Stanje: novo, The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval, and elliptical tubes—both straight and bent tubes. The planetary belt system of the ML100 enables belt grinding without tube rotation, resulting in top-quality finishes. The feed system safely guides straight tubes into the grinding station, ensuring consistent and productive surface quality. Minimal vibration on long tubes: With the ML planetary belt system, there is no tube rotation. The abrasive belts rotate around the tube while it is transported straight through the machine. Polishing of straight or bent tubes: The ML100 is designed to process straight tubes (automatically) or bent tubes (manually). Quick setup: The automatic feed can be easily removed via hinges to allow easy processing of bent tubes. Reduced heat generation: Unlike conventional systems, the planetary belt system significantly reduces frictional heat at the tube’s surface. Oval tubes: Surface treatment of oval or elliptical tubes can be carried out safely with the ML100. Maximum adaptability of the abrasive belt to holes or gaps in the tube. Iodpfx Ajd Hfnbsptsif Technical data – ML100: Working capacity (Ø mm): 10 - 114 No. of stations: 1 Abrasive belt dimensions (mm): (2x) 50x940 Abrasive belt speed (m/s): 3-22 Feed speed (m/s): 1-5 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Feed motor (kW): (2x) 0.12 Total power (kW): 5 Power consumption (A): 11 Dust extraction connection (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 250

Stanje: novo, The tube grinding machine ML75 is the ideal choice for polishing round, oval, and elliptical tubes up to Ø76mm. The planetary belt system of the ML75 features a compact design for reworking bent tubes. The machine can be equipped with an automatic feeder system for straight tubes. This new grinding machine is the solution for machining bent tubes with radii that are too tight for the ML100, and with diameters that are too large for the ML50. Polishing bent tubes with small radii: The planetary belt system of the ML75 offers a compact design, allowing maximum flexibility when reworking tubes with small radii. In contrast to other conventional systems, the planetary belt system reduces friction heat on the tube surface. Straight tubes: The ML75 is designed for processing bent tubes. With an optional feeder system, the ML75 can be quickly reconfigured for polishing straight tubes. Technical Data – ML75: Working capacity (Ø mm): 10–76.2 Number of stations: 1 Abrasive belt dimensions (mm): (2x) 25x860 Abrasive belt speed (m/s): 3–22 Feed speed (m/s): 1–5 Iiedsd Hfg Ejpfx Aptof Abrasive belt motor (kW): 2.2 Wheel motor (kW): 1.5 Feed motor (kW): (2x) 0.12 Total power (kW): 3.94 Power consumption (A): 10 Dust extraction port (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 230

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Dolžina: 2000 mm Iodshmufkjpfx Aptjif Nazivna širina: 450 mm Skupna širina: 505 mm Hitrost traku: 3 m/min, nastavljiva Višina nastavljiva: 800-1400 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, laserska moč: 3.000 W, moč: 3.000 kW (4.078,86 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta hlajenja: voda, skupna dolžina: 6.000 mm, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, NS-6022HG Tube-Laserschneidmaschine 3kW 3-Backen-Profirohrlaserschneidmaschine mit automatischem Ladesystem mit 6 m automatischer Entladung mit chinesischem 3D-Fasenkopf-BLT tauglich für Rohre T CE-Antistrahlungsglas Schutzabdeckungen AVR Düsen- und Linsenset etc. (jeweils SPCS) Serie: NS-HG Typ: Drei-Backen Nutenfunktion: Standard Leistung: 3 kW Maximale Rohrlänge: 7000 mm Rundrohr: Ø15 mm–Ø220 mm Isdowu Rm Rjpfx Aptsif Quadratrohr: 15 mm x 15 mm–150 mm x 150 mm Rechteckrohr: 30 x 20 mm–160 x 80 mm Oval-/Flachovalrohr: Kurze Achse ≥ 15 mm, lange Achse ≤ 210 mm U-Profil: max. 20# I-Träger: max. 18# H-Profil: max. 175 x 90 mm Maximale Beschleunigung: 1,0 G Maximale Spannfutterschwindigkeit: 100 U/min Maschinengewicht: 10 t Stromversorgung: 380 V AC, 50 Hz Standard: Unterstützt Servo (Nut), Staubschutz (Y-Achse), Staubschutz (X-Achse), Staubschutz (Z-Achse), Sicherheitszaun (Lichtvorhang), Null-Reststück, Staubabsaugung im Schneidbereich, Staubabsaugung an der hinteren Spannvorrichtung

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0496, pritisk: 11,76 letvica, moč: 1.395 kW (1.896,67 KM), obratovalni tlak: 12 letvica, temperatura: 190 °C, obratovalna temperatura: 190 °C, skupna višina: 1.600 mm, skupna dolžina: 3.000 mm, nazivna toplotna moč: 1.395 kW (1.896,67 KM), skupna širina: 1.360 mm, nazivna moč: 1.395 kW (1.896,67 KM), lastna masa: 3.200 kg, GAVARDO OMG 1200 – celovit sistem industrijskega parnega kotla – 1395 kW – 2000 kg/h (2016) Visokozmogljiv sistem za proizvodnjo industrijske pare za neprekinjeno obratovanje tovarne. Celoten centralni sistem parnega kotla, odstranjen iz profesionalne tekstilne tovarne. Primeren za takojšnjo ponovno namestitev v industrijsko proizvodnjo. GAVARDO OMG 1200 je visokoučinkovit industrijski sistem parnega kotla, ki ga proizvaja podjetje GAVARDO Caldaie S.r.l., Italija. Ta robusten sistem za proizvodnjo pare je zasnovan za zahtevne industrijske aplikacije in zagotavlja do 2000 kg nasičene pare na uro, zato je primeren za neprekinjeno proizvodnjo 24 ur na dan, 7 dni v tednu. Iodpfx Apszkggcstoif Sistem je bil prvotno nameščen v profesionalni tovarni tekstila, kjer je služil kot osrednji vir pare za proizvodnjo. Bil je v celoti operativen do zaprtja tovarne. Sistem parnega kotla je ponujen kot celovit industrijski paket, ki vključuje gorilnik Riello, električno nadzorno omarico, črpalke, tlačno opremo, komponente za obdelavo vode in pripadajoče dodatke. Tehnične specifikacije • Proizvajalec: GAVARDO Caldaie S.r.l. • Model: OMG 1200 • Vrsta kotla: Horizontalni industrijski generator pare • Leto: 2016 • Serijska številka: 0496 • Toplotna moč: 1.395 kW • Proizvodnja pare: 2.000 kg/uro • Najvišji delovni tlak: 11,76 bar • Najvišja delovna temperatura: 190,7 °C • Suha teža: 3.200 kg • Označeno s CE • Izdelano v skladu z evropskimi predpisi o tlačnih napravah Ključne lastnosti • Celoten industrijski sistem parnega kotla • Visokozmogljivna neprekinjena proizvodnja pare • Zasnovan za 24-urno industrijsko obratovanje • Industrijski plinski gorilnik Riello • Digitalni sistem nadzora kotla • Industrijska električna nadzorna omarica • Sistemi za nadzor tlaka in varnost • Industrijska oprema za dovajanje in kroženje vode • Robustna, izolirana konstrukcija kotla • Primerno za integracijo v obstoječe omrežja distribucije pare Vključuje • Parni kotel GAVARDO OMG 1200 • Industrijski plinski gorilnik Riello • Glavna električna nadzorna omarica • Črpalke za dovajanje vode • Oprema za obdelavo vode • Tlačne posode • Povezave parnih cevi • Sistem za raztezni in kondenzatni rezervoar • Varnostni ventili in sistemi za nadzor tlaka • Povezava dimnih plinov Uporaba • Proizvodnja tekstila • Proizvodnja oblačil • Industrijski pralni obrati • Prehranska industrija • Industrije s procesi, ki zahtevajo paro • Industrijski sistemi za ogrevanje • Tovarne za neprekinjeno proizvodnjo Stanje • Rabljen industrijski sistem • Pred zaprtjem tovarne je bil v celoti operativen • Nameščen v profesionalnem notranjem proizvodnem okolju • Dobro ohranjeno strukturo in mehanično stanje • Normalna kozmetična obraba, skladna z industrijsko uporabo • Na voljo za pregled pred razstavljanjem Lokacija Valga, Estonija Razstavljanje in transport Kupujec je odgovoren za razstavljanje, dvig, nakladanje, transport in vse povezane stroške. Zaradi velikosti, teže, priključka za plin, tlačne opreme in povezanih cevovodnih sistemov je priporočljivo strokovno razstavljanje. Lokacija ponuja dober dostop za težki transport in opremo za dvig. Pogoji prodaje Prodano "takšno, kot je", na dani lokaciji, brez garancije. Del likvidacije tovarne MASI JEANS.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Preklopnik za mešalnike na tirnicah – Sistem nakladanja zabojev na paletah v bobne na tirnicah Znamka: Inox Meccanica s.r.l. Model: ELEVATORI PER CONTENITORI Serijska številka: 2853 Letnik izdelave: 2018 Moč: 5,5 kW Napetost: 400 V, 50 Hz Teža: 1800 kg Maksimalne dimenzije zabojev na paletah: 1200 mm x 1000 mm x 800 mm Višina dviga: 3600 mm Maksimalna nosilnost: 600 kg Iisdpfxewa Dtbs Aptjf Skupne dimenzije sistema za nakladanje: 3400 mm x 2200 mm x 4000 mm Dolžina tirnic: 17500 mm

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Iodpfx Asd Ev Upoptjif Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: novo, Long Belt Grinding Machine LMD2500 incl. Deburring Tool – NEW – Delivery time on request The LMD 2500 is a long belt grinding machine equipped with a flexible abrasive belt that enables the processing of both flat surfaces and edges or corners of materials. This machine is ideal for working on irregular shapes, removing weld seams, and for deburring and rounding of laser-cut parts. The flexible, motor-adjustable height table is especially suitable when the workpiece to be processed cannot be easily moved due to its large dimensions. With the LMD2500, you benefit from the versatility of the long belt together with a variety of grinding tools such as the grinding shoe, manual pad, and deburring brush or disc to process the required areas. - Grinding of flat surfaces with the contact roller - Grain-finishing with flat pad - Weld seam grinding - Deburring of laser-cut parts - Processing of large surfaces - Interchangeable finishing tools - Flexible deburring/edge-rounding station - Pneumatic belt tensioning - Tool holder with counterweight system Ijdpfx Asg I Ipkeptsif - Contact roller tool - Flat tool - Manual pad 100*80mm - Grinding belt, variable speed (8-25m/s) - Edge rounding tool - Including: o Deburring disc holder Ø150mm, medium SH hardness o Sanding discs Ø150mm, grit 120 ceramic with hook-and-loop backing x5 o Surface finishing disc Ø150mm with hook-and-loop backing o Edge rounding brush Ø150mm, fine aluminum oxide o High-adhesion rubber mat (1000x600mm) for small parts o Brush speed 600-1700 rpm o Grinding belt 7800x120 mm

Stanje: novo, Leto izdelave: 2023, Pipe Drilling / Angular Drilling Machine, Drilling Automation TDM100 2D AT – automatic, with two opposing drilling units - Minimum quantity lubrication system - Manual material clamping - Automatic feed and automatic tube rotation - Maximum tube length: 3,000 mm - Positioning accuracy: +/- 0.2 mm - Drilling unit power: 2 x 2.2 kW Iiedelgzytjpfx Aptjf - Manual material loading and unloading - Drill heads swivel ±50° - Manual 360-degree swivel mechanism - Motor speed: 295 – 2,950 rpm - Operation via touch panel - Up to 100 programmable positions - Drilling unit lighting - Integrated tool cabinet - Round tubes up to 114 mm - Square profiles up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm - Double post up to 100 x 15 mm - Flow drilling up to M12 - Drilling diameter up to Ø 50 mm

Stanje: novo, IMMEDIATELY AVAILABLE FROM STOCK!! Subject to prior sale. Iodpfx Aed Ixbzoptoif The OD tube deburring machines remove burrs from tubes after cutting. This machine simultaneously removes internal and external burrs from tubes and profiles without rotating the tube material. Round, square, rectangular, and various other tube and profile shapes are deburred within just a few seconds. Thanks to the rotating brush, the operator does not need to rotate the tube. The tube clamping system enables precise insertion of the tubes and makes it easier for the operator to hold them during the deburring process. The removed burrs are collected in a plastic container.

Stanje: novo, DM1100 C Edge Rounding Machine for Laser, Plasma, and Punched Parts Isdpfx Asd Evcweptoif The DM1100 C performs edge rounding and deburring of sharp burrs on both inner and outer edges of steel, stainless steel or aluminum parts after laser cutting, shearing, or punching processes. The DM1100 C is equipped with double, counter-rotating cross belts with abrasive blocks, providing uniform edge rounding for the entire product. A key advantage of this machine is its ability to deburr products with protective surface film without damaging the foil – only the edges are processed. Excellent processing of parts in a wide range of dimensions, from small parts (50 x 50 mm) up to 1100 mm. Technical Data – DM1100 C Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): 3 Feed motor (kW): 0.18 Total power (kW): 6.2 Power consumption (A): 13 Extraction port per head (Ø mm): 100 Dimensions (mm): 2270x1560x1940 Weight (kg): 1200

Stanje: novo, The FG170 grinding and polishing machine for square tubes and flat profiles stands out due to its robust construction, making it suitable for intensive working conditions. This machine processes workpieces up to 170 mm in width by combining multiple abrasive belt heads with brush units. The FG170 Z is equipped with one abrasive belt head (Z). The FG170 ZK combines an abrasive belt head (Z) with a brush unit (K). Possible configurations include: FG170 2Z = 2 abrasive belt heads, or FG170 2ZK = 2 abrasive belt heads + 1 brush head Other configurations can be selected according to customer requirements. Abrasive Belt Head: Used for processing the surface during the grinding process of square tubes and flat profile elements – removes severe defects and burrs. Brush Head: Final finishing after grinding – provides the surface with a smooth and uniform finish. The FG170 guarantees high and consistent quality when processing stainless steel square tubes and flat profiles, tube by tube. Iedpfed Ix Ntsx Aptjif Abrasive Belt Change: Abrasive belt change in a few seconds, tool-free. Fixed Working Height: FG machines offer a fixed working height. Adjustment for different material thicknesses is made via the vertical movement of the processing stations, so there is no need to modify the roller table at the infeed. Technical Specifications – FG170: Working capacity (Ø mm): 170x200 Number of belt stations (Z): 1-3 Number of brush stations (K): 0-2 Abrasive belt dimensions (mm): 170x2000 Brush band dimensions (mm): 170xØ200 Abrasive belt speed (m/s): 20 Brush band speed (m/s): 15 Feed speed (m/s): 6+12 Abrasive belt motor per head (kW): 4 Brush motor per head (kW): 3 Feed motor (kW): 0.45 Total power (kW): 8.5 (ZK) Power consumption (A): 18 (ZK) Dust extraction connection per head (Ø mm): 80 Dimensions (mm): 1500x1000x1900 (ZK) Weight (kg): 740 (ZK)

Stanje: novo, DM100 ZC – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser cutting, shearing, or punching of metal workpieces ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore hardness) with an abrasive belt, effectively removing heavy burrs in the initial step. The second station features two counter-rotating cross belts with abrasive blocks, which round off the edges of the entire product, both internally and externally, in a second step. A major advantage is the deburring of products with surface protection film, as only the edges are processed without damaging the film. Technical specifications – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Extraction connection per head (Ø mm): (2x) 150 Isdpfod Hintex Aptoif Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Stanje: novo, DESCRIPTION Iodod Ixadopfx Aptjif DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm Ijdpfx Apjlgvkioteif

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Ponujamo skoraj nov stroj za obdelavo gline Tecnoforni S.r.l. FEC 28 kW, izdelan leta 2016. Proizvajalec: Tecnoforni S.r.l. Model: FEC 28 kW Leto izdelave: 2016 Stanje: skoraj novo Vrsta: obdelava gline Iiodpfxsy I N Ruo Aptef Če imate dodatna vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MLS 250 P TR, premer žaginega lista: 200 mm, skupna masa: 4.200 kg, dolžina rezanja (maks.): 2.500 mm, Večlistna žaga za razrez lesa proizvajalca Mario Zaffaroni & Figli S.r.l. Podrobnosti: 1) Dolžina elementov: min. 330 mm, maks. 2500 mm. 2) Debelina elementov: min. 2 mm, maks. 100 mm Iisdpfx Apeyk U Ebjtsf 3) Hitrost podajanja – delo: 3–45 m/min 4) Največja globina reza (rezkanje): 20 mm za žage s premerom 200 mm 5) Skupna moč: 55 kW 6) Moč glavnega motorja: 45 kW 7) Teža: 4200 kg Stroj je popolnoma delujoč in ne potrebuje servisa. V zelo dobrem stanju.

Stanje: dober (rabljeno), Leto izdelave: 2005, Push-Through Furnace System - Pusher (PUS1), Manufacturer: Ipsen International GmbH, Model: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of Manufacture: 2005, Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Model WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, Rinsing tank 2 m³, 60-80 °C Push-Through Preheating Furnace, Model DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas fired, 80-100 mbar, 350-500 °C Iodpfx Apoyabxyjteif Push-Through Gas Carburizing Furnace (Double Lane), Model PP-2 65x65x65-18-G, natural gas fired, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950 °C, 140 pcs per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Model QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, Air cooling, 6 m³ bath volume, max. 120 °C, 60-80 °C operating temperature Two-Chamber Post-Washing Machine, Model WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, Rinsing tank 2 m³, 60-80 °C Push-Through Tempering Furnace, Model DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, max. furnace temperature 300 °C, 150-240 °C operating temperature Batch Transport System, Measuring, Switching and Control Cabinet with Conti-Control system, Model CO/CO2-2 Batch Data: Case hardening for gearbox components 650 mm x 650 mm x 650 mm, max. 280 kg, Batch transport height 800/2,200 mm

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, For sale is a complete shrink sleeve system consisting of a sleeve applicator (Etisleeve) and a multi-zone steam shrink tunnel (Powersteam) from the renowned manufacturer Sleever International. The system was until recently in productive use and reliably and precisely applies shrink sleeves to cylindrical containers. Iedpfx Apsx Tg Ubstjif Machine configuration: Sleeve applicator Manufacturer: Sleever International Model: Etisleeve Type: 75 SL 2V 80 Year: 2005 CE compliant Steam shrink tunnel Manufacturer: Sleever International Model: Powersteam Type: MSA 250 Year: 2005 Control & operation: – Integrated HMI control panel – Digital entry of sleeve length – Performance display (units per minute) – Cycle and process control – Safety monitoring (housing monitoring, reset function) – Production and daily counters Technical features: – Precise vertical sleeve application – Automatic sleeve film feed – Centering station for exact positioning – Multi-zone steam shrink tunnel with stainless steel interior – Continuous stainless steel conveyor belt – Screw-feed system with exchangeable screws – Height- and format-adjustable guide rails – Complete safety glass enclosure with interlock – Industrial drives and robust mechanics Formats & performance: – Proven operation with 100 ml containers – Documented sleeve lengths (e.g. 155 mm) – Additional formats possible (format dependent) – Performance depending on product approx. 40–80 containers/minute Condition: – Used – System complete and fully functional Scope of delivery: – Etisleeve sleeve applicator – Powersteam steam shrink tunnel – Integrated conveyor technology – Feed screws and visible format parts – Available adjustment and format documentation The system is currently still fully assembled and can be inspected in operational condition. A live demonstration under power, with product and sleeve film, is possible by prior appointment. Location: – Berlin – Inspection possible Price: – On request

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 23A0017, premer struženja nad prečnim suportom: 520 mm, največja hitrost vretena: 3.000 obr/min, potovalna razdalja osi X: 500 mm, pomik po osi Z: 500 mm, moč vretenovega motorja: 11.000 W, hitro pomikanje X-os: 18 m/min, hitri pomik na osi Z: 18 m/min, skupna višina: 1.890 mm, skupna širina: 1.620 mm, dolžina pomika po osi Y: 2.500 mm, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, CNC lathe with 45° slant bed - COGENTECH Iedsvwbvpjpfx Aptjif > Siemens 808D control system > Siemens motors > Linear guides > 6'' hydraulic chuck with 3 jaws > 6-position electric turret

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Na prodaj je polžasti separator SS-M podjetja MASS; Višina: 1500 mm Dolžina polža: 800 mm Skupna širina: 1060 mm Iijdpfsx E Ry Sex Aptjf Nagibni kot: 30 stopinj Profil: 9 mm Regulacija razdalje možna s kolesom.

Stanje: novo, SESTAVNI DELI: (14.000 eur = Bunker + električna plošča): 1.) Bunker za pesek 2mc: -Volumetrično doziranje s tekočim trakom - 1,5 kW motor -Vibrator 0,18 kW - Bunker za gramoz 2 m2 -Volumetrično doziranje s tekočim trakom - 1,5 kW motor 2.) Električna nadzorna plošča: „ Zagon/ustavitev mešalnika „ Zaženi transportni trak za pesek - transportni trak se bo ustavil po prednastavljenem času s časovnim relejem " Zaženite transporter gramoza - transporter se bo ustavil po prednastavljenem času s časovnim relejem „ Nastavitev količine vode (digitalni prikaz) Ijdoiz Dl Iepfx Aptoif 3.) MEŠALNIK, MX500 / MX300: -Kad je obložena z zamenljivim plaščem iz hardox pločevine 4mm; - Podloženo dno z odstranljivimi obrabnimi elementi (10 mm) - Zamenljive mešalne motike iz hardox pločevine - Zaščitna mreža MX500: (+6400 evrov) -Koristna prostornina: tekoči beton 500 litrov -Pol mokri beton: 350 litrov -Produktivnost: 3,5 kubičnih metrov polmokrega betona/uro - Moč motorja: 11 kW (380V) - Dimenzije: 1,70 x 1,70 x 1,40 m - Masa: 900 kg MX300:( + 4800 evrov ) -Koristna prostornina: tekoči beton 300 litrov Polmokri beton: 200 litrov -Produktivnost: 2,4 kubičnih metrov polmokrega betona/uro - Moč motorja: 5,5 kW (380V) - Dimenzije: 1,40 x 1,40 x 1,40 m - Masa: 650 kg NEOBVEZNI DELI: 1.) TEHTANJE CEMENTA: -Jekleni lijak s pnevmatskim odpiranjem; -kompresor; -Pnevmatski vibrator; -obremenitvena celica; - Digitalni indikator teže - nameščen na električni nadzorni plošči. - Polž za cement (priključi se na silos za razsuti cement naročnika ali v silosu, ki ga nudi naše podjetje) -Pokrov mešalnika za blokiranje cementnega prahu Cena: 13.000,00 eur + DDV. 2.) SILOSI ZA CEMENT -Kapaciteta: 24 kubičnih metrov (30 ton cementa) -Silos je opremljen z lestvijo, ograjo na pokrovu in dovodno cevjo s hitro spojko. - Silos je opremljen s filtrom, ventilom za sprostitev tlaka, indikatorji nivoja, fluidizatorji in loputo na izpustnem ustju. -Notranji premer 2500 mm; -Višina cilindričnega obročka 4500 mm; -Višina stožčastega dna 1700 mm; -Skupna višina, vključno z ograjo 8700 mm. - Neto teža: približno 3000 kg. Cena: 18.500,00 eur + DDV. STROJI SO NOVI. Garancijska doba za stroje je 12 mesecev od dobave.

Leto izdelave: 2024, stanje: novo, Applications: Production of: pavements, curbstones, concrete masonry blocks, foundation blocks, posts, floor slabs, chimneys, gutters, road culvert covers. Advantages: Intensive vibration combined with hydraulic pressing of the concrete ensures high-quality concrete products. Vibrators mounted on the counter-mould play a key role in achieving optimal concrete compaction. Optional: Automatic operation: PLC (Mitsubishi Electric) + touchscreen + control software for automatic machine operation; Software parameters are set according to the concrete products to be produced; Memory for 30 different programmes; The control programme provides essential information such as the number of cycles performed, average cycle time, and actual operating time. Hard-chromed tubular guide columns Teflon-coated sliding bearings High productivity Our extensive range of moulds enables versatile production. Reliable mechanical and hydraulic systems. Technical data: Components: press, pallet stacking area, pallet feed line, concrete hopper, concrete feed box (1) for the mould, pallet discharge line with fresh products, hydraulic unit, electric control panel with PLC. Pallet dimensions: 700x670x40mm Usable area: 640x640mm Min./Max. finished product height: 40mm/250mm Vibration frequency: 3000rpm Hydraulic pump flow rate: 40 l/min Iiodpfohufyhox Aptef Cycle time: 60–100 seconds (automatic: 35–60 seconds) Installed power: 15.50 kW Hydraulic power unit: 7.5 kW Table vibrators: 6.00 kW + 0.28 kW Counter-mould vibrators: 0.80 kW Discharge line: 0.55 kW Supply voltage: 380V Overall dimensions: Width: 1.60m (excluding hydraulic unit and control panel) Length: 5.60m Height: 2.85m Machine weight (without mould): 4,000 kg Approx. mould weight: 250–300 kg Optional: paving stone finishing layer device

Stanje: novo, Applications: Production of concrete blocks for walls, foundations, columns, roofs, chimneys. Production of concrete elements for water drainage. Advantages: - The optimal distance between the tooling and casing ensures a convenient position for the operator - Handling the steering wheel requires minimal effort thanks to a gear reducer - Simple operation and maintenance - Professional-grade vibrator with low power consumption - Automatic stop of vibration after demoulding - Wide range of moulds available Iiodpoiwut Tsfx Aptof - Shuttering for tall concrete elements (up to 370 mm) can be installed* Technical Specifications: - Maximum mould dimensions: 800 x 500 mm - Maximum end product height: 370 mm - Cycle time: 60 seconds - Power supply: 0.28 kW - Supply voltage: 220V - Overall dimensions: 1.35 x 1.55 x 1.7 m - Machine weight (including mould): 400 kg - Vibrator speed: 3,000 rpm - Concrete output: 2 m3/hour - Recommended concrete mixer: MX300L