Kemmerich Dvojni Odvijalec Haspel nakup rabljenega (1.038)

Stanje: rabljeno, številka stroja/vozila: 52 / 519, Spindle diameter: 90 mm X-travel: 700 mm Column distance: 900 mm Size of the movable long table: 770 x 900 mm Table longitudinal travel (X-axis): 700 mm Y-travel: 500 mm Z-travel: 1100 mm Feed range - table: 15 - 280 mm/min Rapid traverse Z-axis: 530 m/min Spindle bore diameter / taper: MT4 (Morse) mm Maximum spindle bore diameter: 230 mm Maximum spindle stroke: 170 mm Spindle speed, lower range: 10 rpm Spindle speed, upper range: 2000 rpm Vertical feeds of the spindle head: 0.02 - 0.2 mm/rev Feed steps: 6 Main spindle drive power: 3 kW Total power requirement: 4.2 kW Approx. machine weight: 4 t Crjdpfx Aoh Ra Stem Toc Approx. space required: 1.9 x 2.2 x 2.4 m

Stanje: rabljeno, BIESSE STREAM SB2 10.5 double-sided edge banding machine, suitable for use as the first and second machine in a squaring and edge banding line. Numerical control with Sintra software. Cedpfx Amsu Rim Hj Torc Machine suitable for the 1st and 2nd pass of the panel. Motorized mobile shoulder opening by CNC, 3000 mm. Panel height: 60 mm. PVC/ABS up to 3 mm. Infinitely variable feed speed via CNC (up to 40 m/min). Electronically adjustable working height via CNC (up to 60 mm). Electronically adjustable mobile shoulder opening via CNC. Motorized rubber belt with increased pressure. Support rail with covered pins – spacing between pins: 500 mm. Automatic system for supporting large panels. Anti-adhesive unit. Squaring section, consisting of (per side): * Automatic, time-controlled anti-splintering unit * Double scoring unit * Double-motor trimming unit Edgebanding section, consisting of (per side): * Gluing unit for EVA hot-melt glue with premelter * Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC * 6-position coil magazine with automatic edge changeover via CNC * Trimming unit with 2 motors and automatic tilting * Overlapping trimming group with 2 motors * Copying unit with 2 electronically adjustable tilting motors via CNC * Multifunction contour unit with 4 motors (trimming + contouring) with automatic numerical control * Milling unit (with 2 motors on fixed left side / 1 motor with 0-90° tilting on mobile right side) * Edge scraper unit electronically controlled via CNC * Glue scraper unit * Oscillating brush unit * Hot air blower unit

Stanje: rabljeno, Double pick-up, feed-in system. Designed for production lines for drilling, squaring, edge trimming, planing, routing, sanding, and lacquering without operator supervision. Fully automatic—no need for manual adjustments during the manufacturing process. Working dimensions: - Maximum length: 3000 mm - Maximum width: 1300 mm - Automatic double-station panel unloading system - Throughput: 13-minute cycles - Panel gripping system via motorised arm with suction cups and vacuum drive system Codpfx Aeqvt Ecom Terc TECHNICAL DETAILS SUBJECT TO VERIFICATION

Stanje: rabljeno, Automatic double cell loader without pit for use in an edging line Motorized panel infeed transfer Double automatic panel loading station Suction cup system for panel handling Panel remover Panels can also be processed in double rows Usable panel width: 1300 mm Codpfx Amorzhfho Torc Usable panel length: 3200 mm Vacuum pump Motorized transfers for loading panel stacks Motorized adjustment via automatic numeric control of horizontal suction cup support bars Programming and control system

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Cjdpfx Aewhmdfsm Tjrc Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output 4 working units (for each side of the machine): - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 2 horizontal upper support beams (with carriage gliding on them) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal adjustable metal arms with vacuum suction pads Crodjflc T Sopfx Am Tjc OPTIONAL: No. 2 external roller conveyors (on the floor) for stack input of panels to the loading station No. 1 external motorized roller conveyor (for receiving panels from loading station) Separate electrical control panel Electronic control system Perimeter safety fencing with safety mats Total connected load 17.7 kW Operating capacity (cycles/min) approx. 16-20 Panel thickness (min/max) approx. 10-50 mm Min. panel dimensions approx. 250 x 320 mm Max. panel dimensions approx. 1200 x 3000 mm

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE, max. working width 2500 mm The line consists of the following machines: U06051) Motorized roller conveyor (infeed table) "HOMAG" model TBL 100/25/12/S U06052) 1st double-sided sizing and edge banding machine "HOMAG" model Profi KFL 525/8/A3/15 Codpjdg Itmsfx Am Tsrc U06053) Rotation station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model Profi TDL 310/25/12 U06054) 1st double-sided sizing and edge banding machine "HOMAG" model Profi KFL 526/9/A3/25

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (First & Second in a machine line) Electronic control – Programmable With separate electrical and control panel Safe and soundproof enclosure No. 1 vertical column, for supporting work units Min. useful working width (mm): 220 Max. useful working width (mm): 3000 Min. useful working thickness (mm): 6 Max. useful working thickness (mm): 60 Retractable positioning cams, spacing (mm): 400 Feed (min/max) steplessly adjustable (m/min): 4–24 Total power: 40 kW No. 3 working units (for each side of the machine): 1 automatic scoring unit: 2.2 kW / 3.2 kW 1 chipping unit: 5.5 kW / 7.3 kW (RPM 3000 / 6000) 1 universal milling unit (electropneumatically controlled): 4 kW / 5.8 kW (RPM 3000 / 6000) Codpsgz Alxofx Am Tsrc

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (First & second in a production line) Control system: (CNC) NC 21, Homatic software Safety and sound-insulated enclosure Cedpfx Amsh Nx U Ne Torc No. 3+3 vertical columns to support the working units Min. useful working width (mm): Max. useful working width (mm): 3,000 Max. useful working thickness (mm): approx. 100 Max. workpiece length before stops (mm): 1,250 Retractable stop cams, spacing (mm): 1,000 Feed rate (min/max) continuously adjustable (m/min): approx. 8–25 No. 4 work units (for each side of the machine): 1 automatic scoring unit (approx. 1 × 1.5 kW) 1 cutting/milling unit (approx. 1 × 4.5 kW) 1 universal milling unit (electro-pneumatically controlled, approx. 1 × 4.5 kW) 1 free space

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a production line) Electronic control programmer Safe and soundproof housing – OPTIONAL No. 4+4 vertical columns for supporting working units Min. useful working width (mm): 150 (approx.) Max. useful working width (mm): 3100 (approx.) Codpfx Amoifz H No Tsrc Max. useful working thickness (mm): 180 (approx.) Retractable stops, spacing (mm): 500 (approx.) Feed rate (min/max), steplessly adjustable (m/min): 8–40 (approx.) No. 8 workstations (for each side of the machine): 1 automatic scoring unit 1 milling/planing unit 1 universal milling unit (electro-pneumatic control) 1 universal milling unit 1 profile milling (copying) unit with 2 vertical motors 1 sanding unit (with grinding wheel) 1 sanding unit (with sanding paper)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 380 V, največja hitrost vrtenja: 1.450 obr/min, premer brusilnega koluta: 400 mm, hitrost brusnega kolesa: 1.500 obr/min, moč: 2,2 kW (2,99 KM), vhodna frekvenca: 50 Hz, Tehnični podatki (po tipski tablici): • Proizvajalec: Klöckner & Co – Werkzeugmaschinen, Essen • Tip: DOS-400 • Napetost: 380 V • Frekvenca: 50 Hz Crodpjyvfw Ejfx Am Tjc • Moč: cca 2,2 kW • Hitrost vrtenja: cca 1.450 obr/min • 2 brusna koluta • Stacionarna naprava / izvedba s podstavkom • Visokonapetostni motor Ostalo: Prodaja tako, kot je Ogled in prevzem v Hagen a.T.W. po dogovoru možen Lokacija: Hagen a.T.W. Prodaja podjetja → brez garancije & jamstva, napake pridržane

Stanje: rabljeno, Leto izdelave: 2010, Pressure: 600 t Column width: 3,640 mm Fixed stroke: 350 mm Stroke rate: 11 - 44 strokes/min Shut height (stroke + ram adjustment at top): 1,550 mm Lateral column passage: 2,200 mm Table area: 3,600 x 2,500 mm Ram area: 3,600 x 2,500 mm Ram adjustment: 400 mm Strip width: 2,000 mm Material thickness: 0.6 - 2.5 mm Material cross-section: 1,600 x 2.5 mm² Coil weight: 35.0 t Number of straightening rolls: 13 Straightening roll diameter: 50 mm Blank cutting line (press, coil line, blank stacking system) Year of manufacture: 1993 - 2010, new Siemens S7 control system - Press: Schuler EBS 4-600-3.6-350, with infinitely adjustable articulated drive, flywheel brake, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram balance, motorized ram adjustment, ram locking Sliding table (2x) without rails for the moving table Cjdjvut Dyjpfx Am Torc - Decoiler: Schleicher HE-355-2100, year 1994, with auxiliary drive, pressure device, movable - Coil loading car - Strip pull-off device Schleicher - Scrap shear - Straightening machine: make Schnutz, type RME 18/50/13-2000 TZ, year 1994, with infinitely adjustable drive, 30 intermediate rolls, 117 support rolls - Loop bridge - Roll feed unit: make Schleicher, type WV-SYS-A 160-2000, year 1994 Blank stacking system / destacker: NSM Magnettechnik Dismantled and stored – video at the owner prior to dismantling available

Stanje: zelo dobro (rabljeno), I am selling a double-end tenoner CELASCHI TSA 300. Working width up to 3000 mm Feed speed: 3-18 m/min. Left side / fixed configuration: 1 pc. cutting unit 4.0 kW 1 pc. milling unit 5.5 kW Right side / movable configuration: 1 pc. cutting unit 4.0 kW 1 pc. milling unit 5.5 kW Cjdpfovxu Uhsx Am Terc Upper pressure belt with top-feed system. Throughfeed machine. Condition: Very good. Fully operational. Available immediately.

Leto izdelave: 2007, stanje: zelo dobro (rabljeno), I am selling a double-end tenoning and milling machine FRIULMAC IDRAMAT, year of manufacture 2007. Working width up to 2500 mm Configuration left side / fixed: 1 + 1 pc. cutting units top + bottom / 3.0 + 3.0 kW 1 + 1 pc. grooving saw units front + rear with synchronised feed Configuration right side / movable: Cedpoib A E Aefx Am Tsrc 1 + 1 pc. cutting units top + bottom / 3.0 + 3.0 kW 1 pc. special milling unit top / 5.5 kW Material hold-down conveyor with top-side feed. Special construction, also suitable for edge sizing. Through-feed machine. Siemens Simatic control panel. Condition: very good. Available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, I am selling a double-end profiling milling machine, SCM CONCEPT NT. Working width up to 3000 mm. Crodpetv Rxbjfx Am Tjc Configuration left side / fixed: - 1 pc. cutting unit - 1 pc. milling unit - 1 pc. movable jump milling unit Configuration right side / movable: - 1 pc. cutting unit - 1 pc. milling unit - 1 pc. movable jump milling unit Top pressure conveyor belt for material feed. Through-feed machine. Condition: Very good. Available immediately.

Leto izdelave: 1996, stanje: zelo dobro (rabljeno), I am selling a double-end profiling milling machine EGURKO ORTZA PDA 56/2. Codpjizrf Nofx Am Terc Working width: 200 to 3000 mm Configuration left side / fixed: 3 swiveling side milling units Configuration right side / movable: 3 swiveling side milling units Top pressure conveyor belt. Through-feed machine. Condition: Very good. Available immediately. Installed, can be switched on right away. Price per unit. 2 units in stock, immediately available.

Stanje: dober (rabljeno), Leto izdelave: 1976, Wire diameter range: a) Single wire: 2.2 - 3.8 mm b) Double wire: 2.2 - 3.4 mm Nail lengths: 10 - 80 mm Output: 300/600 nails/min. Cedpfod Im Nuex Am Terc

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 5350 x 4650 x 1820 mm Weight: 7,500 kg Total connected load: 47 kW Double-end profiler INDUSTRY SERIES 8030H - 8 units - Working width min./max.: 300 - 3,000 mm Crodpfx Amsvz Hdyo Toc - Working height min./max.: 10 - 120 mm - Continuously adjustable feed speed: 6 - 36 m/min - Feed motor: 4.0 kW - Motor, width adjustment: 0.75 kW - Total power connection: 47.0 kW - Voltage: 400 V / 50 Hz - Extraction nozzles: 8 x Ø 120 mm - PLC + touchscreen control - Transport chain with cams, pitch: 500 mm - Infeed length: 1,500 mm for panels / floorboards / furniture boards / doors Pre-scoring saw: - Motor: 2.2 kW - Speed: 3,000 rpm - Saw blade arbor Ø 30 mm - Saw blade Ø min./max.: 160 - 200 mm Cross-cut saw (chipper): - Motor: 5.5 kW - Speed: 3,000 rpm - Saw blade arbor Ø 30 mm - Saw blade Ø min./max.: 200 - 300 mm 1st milling spindle: - Motor: 5.5 kW - Speed: 7,500 rpm - Milling spindle arbor Ø 40 mm - Tool Ø min./max.: 108 - 180 mm - "Jumping" (pneumatically controlled infeed and outfeed) 2nd milling spindle: - Motor: 7.5 kW - Speed: 7,500 rpm - Milling spindle arbor Ø 40 mm - Tool Ø min./max.: 108 - 180 mm - Swiveling +60° to -30° - Dimensions: L = 5,350 mm, W = 4,650 mm, H = 1,820 mm - Weight: 7,500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4850 x 4650 x 1820 mm Weight: 6500 kg Total power requirement: 47 kW Double-End Tenoner INDUSTRY SERIES 8025H - 8 processing units - Working width min./max.: 300 - 2500 mm - Working height min./max.: 10 - 120 mm - Feed rate, infinitely variable: 6 - 36 m/min - Feed motor: 4.0 kW - Width adjustment motor: 0.75 kW - Total connected load: 47.0 kW - Voltage: 400 V / 50 Hz - Extraction ports: Ø 8 x 120 mm - PLC + touch screen control - Transport chain with cams, pitch 500 mm - Infeed length: 1500 mm for panels / floorboards / furniture boards / doors Scoring saw: - Motor: 2.2 kW - Speed: 3000 rpm - Saw blade mount: Ø 30 mm - Saw blade diameter min./max.: 160 - 200 mm Cross-cut saw (hogger): - Motor: 5.5 kW - Speed: 3000 rpm - Saw blade mount: Ø 30 mm - Saw blade diameter min./max.: 200 - 300 mm 1st Milling spindle: - Motor: 5.5 kW - Speed: 7500 rpm - Spindle mount: Ø 40 mm - Tool diameter min./max.: 108 - 180 mm - Jumping (pneumatically controlled infeed and retract) 2nd Milling spindle: - Motor: 7.5 kW - Speed: 7500 rpm - Spindle mount: Ø 40 mm - Tool diameter min./max.: 108 - 180 mm - Swivelling +60° to -30° Crsdpfsvz E R Ssx Am Tec - Dimensions: L=4850, W=4650, H=1820 mm - Weight: 6500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height): 5350 x 4380 x 1820 mm Weight: 6800 kg Total Power Requirement: 41 kW Double-End Tenoner INDUSTRY SERIES 6030H - 6 units - Working width min./max.: 300 – 3000 mm - Working height min./max.: 10 – 120 mm - Feed rate continuously adjustable: 6 – 36 m/min - Feed motor: 4.0 kW - Width adjustment motor: 0.75 kW - Total connected load: 41.0 kW - Voltage: 400 V / 50 Hz - Extraction connections: Ø 6 x 120 mm - PLC + touch screen control - Transport chain with cams, pitch 500 mm - Infeed length: 1500 mm for panels / flooring / furniture boards / doors Scoring Saw: - Motor: 3.0 kW - Speed: 3000 rpm - Saw blade arbor: Ø 30 mm - Saw blade diameter min./max.: 160 – 200 mm Crosscut Saw (Chipper): - Motor: 7.5 kW - Speed: 3000 rpm - Saw blade arbor: Ø 30 mm - Saw blade diameter min./max.: 200 – 300 mm Milling Spindle: - Motor: 7.5 kW Cjdevz E R Eepfx Am Tsrc - Speed: 7500 rpm - Spindle arbor: Ø 40 mm - Tool diameter min./max.: 108 – 180 mm - Swiveling: +60° to -30° - Dimensions: L = 5350, W = 4380, H = 1820 mm - Weight: 6800 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4850 x 4380 x 1820 mm Weight: 5800 kg Total power requirement: 41 kW Double-end tenoner INDUSTRY SERIES 6025H - 6 units - Working width min./max.: 300 - 2500 mm - Working height min./max.: 10 - 120 mm - Feed speed steplessly adjustable: 6 - 36 m/min - Feed motor: 4.0 kW - Width adjustment motor: 0.75 kW - Total connected load: 41.0 kW - Voltage: 400 V / 50 Hz - Extraction ports: 6 x 120 mm diameter - PLC + touch screen control - Transport chain with cams, pitch 500 mm - Infeed length: 1500 mm (for panels / floorboards / furniture boards / doors) Pre-scoring saw: - Motor: 3.0 kW - Speed: 3000 rpm - Saw blade mounting: 30 mm diameter - Saw blade diameter min./max.: 160 - 200 mm Cross-cut saw (hogger): - Motor: 7.5 kW - Speed: 3000 rpm - Saw blade mounting: 30 mm diameter - Saw blade diameter min./max.: 200 - 300 mm Milling spindle: - Motor: 7.5 kW Crjdpfxovz E Hts Am Tjc - Speed: 7500 rpm - Milling spindle mounting: 40 mm diameter - Tool diameter min./max.: 108 - 180 mm - Swiveling: +60° to -30° - Dimensions: L = 4850, W = 4380, H = 1820 mm - Weight: 5800 kg

Stanje: rabljeno, Leto izdelave: 1972, Premer planske plošče 5000 mm Premer vrtenja 6100 mm Višina struženja 2300 mm Krmiljenje Siemens Tip Sinumerik 840D Pogon 55 kW Obremenitev mize 55 t Podpore 2 stružne podpore Dimenzije batiča 340x340 mm Obremenitev mize 55000 kg Število obratov 280 U/min Št.: 149/50384 novo Siemens krmiljenje tip Sinumerik 840D v letu 2015 Crodpfxeyqtile Am Tjc Dodatna oprema in omare je možno dokupiti po želji Tehnični podatki so podatki proizvajalca oz. uporabnika, zato zanje ne odgovarjamo. Pridržujemo si pravico do predhodne prodaje; veljajo izključno naši pogoji poslovanja in prodaje. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, žerjavna kapaciteta 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali vaše podjetje, kontaktirajte nas. Več ponudb najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Ekipa Markus Hirsch

Stanje: dober (rabljeno), vrsta goriva: dizel, Leto izdelave: 2014, obratovalne ure: 1.064 h, Hamm HD 8 VV Valjar / Cestni valjar / Tandemski valjar 2014 Kubota Diesel Video je možno poslati preko WhatsAppa. Stalna zaloga, glejte spletno stran. Cene so EXW Nuland. Van de Wert Trading B.V. ima spremenljivo zalogo strojev, tovornjakov, prikolic in priključkov. Vse naše dobave so po trgovinskih cenah v stanju AS-IS, brez garancije. (glejte naše splošne pogoje) Za ogled in/ali testno vožnjo lahko brez obveznosti rezervirate termin. Cedpfx Amjywu Nne Terc Prosimo, pokličite vnaprej, saj nismo vedno prisotni. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, DTS Double Screw Blancher made of stainless steel Brand: DTS Year of manufacture: 2004 Power supply: 400 V Technical specifications: - Steam-heated system - Operating pressure: 6 bar - Screw dimensions: approx. Ø 1200 x 5000 mm Cedpoyku D Djfx Am Torc - Water capacity: 1 x 4.41 m³ and 1 x 3.39 m³ Discharge conveyor: - Steel, dimensions: 4800 x 500 mm Total footprint: 8500 x 4300 mm The device is offered without platform, stairs, or grating floor. The DTS double screw blancher set is an advanced processing unit entirely constructed from stainless steel, designed for thermal processing and conveying of food raw materials, particularly potatoes and root vegetables. Thanks to its high-pressure (6 bar) steam heating system and large operational capacity, the unit is ideal for blanching, scalding, or pre-processing in high-throughput production lines. The use of two independent large-diameter screws allows precise control over product retention time, ensuring consistently high processing quality while minimizing the risk of mechanical damage to the raw material.

Stanje: rabljeno, Leto izdelave: 1961, Največji premer struženja: 4200 mm Credpfx Aouddnvsm Tsc Premer planske plošče: 3700 mm Največja višina struženja: 2600 mm Največja teža obdelovanca: 35 t Moč: 80 KM DIGITALNI PRIKAZ KRMILJENJA Največji premer s prečnimi suporti: 4200 mm Največji premer struženja s stranskim suportom: 3900 mm Največja višina struženja nad plansko ploščo: 2500 mm Stranski suport 1 vertikalni brusilni drsnik: 1200 mm hoda (izven obratovanja) 1 stružni drsnik: 1400 mm hoda Samo za natančne aplikacije, ni primerno za težja groba stružna dela.