Kadična Pasterizacijska Naprava nakup rabljenega (6.761)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Safety tester with scanner for high voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in excellent condition. The SEFELEC 506-S test device for electrical safety testing, a new generation EATON model, is based on ARM Dual Core technology components and controlled by a DSP. This technology provides the operator with optimal stability and repeatability of measurements. The high accuracy and test speed are tailored to the quality assurance requirements in production and incoming goods inspection. The sequencing function simplifies operation of the SEFELEC 506-S test station when integrated into a test setup or test bench. The 7” touchscreen of the new SEFELEC model series impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of measurement sequence - Sequence mode for combining multiple consecutive tests Iijdpfsxqxw Tox Ab Asb Withstand voltage at 5 kVAC 500 VA and 6 kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2 TΩ range PE measurement at 32 A – 8 VAC, measurement 0 ... 1 Ω Optional: Test current 50 A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming as well as displaying active tests and results Integrated ARM Dual Core Control & Nand 3D technology for optimum precision, stability, and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-034: Particular requirements for measuring insulation resistance and for test equipment for dielectric strength) Shipping is possible upon prior arrangement. #8312-2

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Safety tester for high voltage test bench - EATON Sefelec 506-S The device was acquired in 2023 and is in TOP condition. The SEFELEC 506-S electrical safety tester, a new generation EATON model, is based on ARM dual-core component technology and controlled by DSP. This technology offers the operator optimal stability and repeatability of measurements. High measurement accuracy and speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequencer function simplifies station operation when integrating the SEFELEC 506-S into a test rig or test bench. The new SEFELEC series’ 7” touchscreen impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of measurement sequence - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Ijdjxqxt Iepfx Ab Aeib Detection modes by current threshold or current fluctuation (ΔI) Burn mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE (protective earth) test at 32A–8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp-up, hold, ramp-down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming and displaying ongoing tests and results Integrated ARM dual-core control & NAND 3D technology for optimum accuracy, stability, and repeatability Integrated DSP allows for higher test speeds Large internal memory for storage of configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical measurement, control and laboratory equipment – Part 2-034: Particular requirements for measurement equipment for insulation resistance and withstand voltage) Shipping available by arrangement. #8312-1

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Hydac FCU2210 Fluid Control Unit Hydraulic Service Device with Accessories Iisdpfx Abev I Tdge Aeb

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, BMB Coating System for Printed Circuit Boards, Model TUA-200 / 2, in EXCELLENT condition. Commissioned: 2023 (as new) and only used for 6 months. Specification: Professional version (very well equipped) - High-speed coating up to 4x faster - 3 coating processes in one system - Suitable for components up to 1200x570mm - Permanent viscosity/temperature control - Full traceability (per version) - Tool identification and parameter assignment - Maximum protection by encapsulating components with lacquer - (Digital work documentation system, in process of clarification) - Large lacquer tank volume for tall components - Lacquer consumption calculation - Innovative, robust, and proven technology With the BMB Traceability and PDM system (equipment under clarification), you can always track when, where, by whom, and how each component was produced. Complies with ISO/TS 16949 requirements. When setting up a tool, the PDM system automatically detects all necessary coating parameters. Work instructions, videos, technical data sheets, handling instructions, etc.—everything is in its place! 19″ pivoting smart touch panel Viscosity control Tool monitoring: automatic detection and setting Iedpfxsv I Tb Eo Ab Aoib Machine electrically height-adjustable Coating processes: - Dip Coating (DipCoat) - Selective-Contact-Coating (SCC®) - Selective-Transfer-Coating (STC®) Shipping available via freight carrier by arrangement. #8300

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Sabroe / York / Stal Ammonia Industrial Refrigeration Plant (NH3) Ijdpfxjyp H Tze Ab Aoib General Set Specification: Main Brands: Sabroe, York, Stal, Arctos Refrigerant: R717 / NH3 (Ammonia) Description: Complete, high-capacity industrial refrigeration installation consisting of multiple integrated modules. The complete line includes: 1. Screw Compressors: - Sabroe SAB 83 (2004): Displacement 1603 m³/h, speed 3600 rpm, dimensions: 3900 x 1250 x 2150 mm. - York Refrigeration SAB 83 (2001): Displacement 1331 m³/h, speed 2950 rpm, dimensions: 3150 x 1300 x 1600 mm. Set includes a 675 l pressure vessel (800 x 800 x 2150 mm). - ABB Stal Refrigeration S26B (1994): Dimensions 1550 x 1450 x 2400 mm. - Stal Refrigeration AB SVA26E (1991): Compressor type S26A-25, displacement 700 m³/h, dimensions: 1600 x 1000 x 2420 mm. 2. Separator Tanks and Pumping Stations: - Stal-Astra NH3 Separator (1991): Insulated, capacity 4300 l, dimensions: 4100 x 1400 x 1400 mm, fitted with ammonia pumps. - Stal-Astra NH3 Separator (1991): Insulated, capacity 3000 l, dimensions: 4100 x 1100 x 1100 mm, fitted with ammonia pumps. 3. Auxiliary Equipment and Control Systems: - Arctos ARLEX ND Degasser (2018): Modern module supporting the efficiency and safety of R717, dimensions: 570 x 400 x 1100 mm. - Main Control Cabinet: Extended central unit, 4.8 m long, equipped with a modern Siemens HMI touch panel, dimensions: 4800 x 630 x 2200 mm. - Rittal Control Cabinet: Equipped with a WEG frequency converter (inverter), dimensions: 1000 x 600 x 2280 mm. This powerful refrigeration system combines proven, high-performance screw compressors from leading manufacturers. The presence of large, insulated separator tanks with integrated pumps ensures adequate power reserve and operational stability in ammonia circuits. Despite the varying ages of individual components (ranging from 1991 to 2018), the system forms a coherent whole, managed by an advanced control center utilizing solutions from Siemens and WEG.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 4.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 111549, potreba po zraku: 6 m³/h, obratovalni tlak: 6 letvica, skupna širina: 1.300 mm, vrsta vhodnega toka: trifazni, notranja dolžina: 8.000 mm, Stroj uporablja za peskanje jeklenih delov, dodatno opremljen z mokrim odpraševalnikom, kar omogoča tudi peskanje aluminijastih delov (dodatna namestitev proti doplačilu). - Leto izdelave: 2024 - Delovni čas stroja: 2000 h - Mrežni transporter iz mangana, širina 1000 mm - Nastavljiva hitrost tračnega transporterja - 4 turbine moči 11 kW, tip Rutten Gamma 330 HD - Brezstopenjska regulacija vrtljajev turbin Iiodpfxjwvgbge Ab Aob - Komora Hot Spot iz manganove in orodnega jekla - Samodejno zaznavanje delov - Samodejna regulacija pretoka abraziva - Samodejno dopolnjevanje abraziva - Samodejni odpih delov - Sistem odpraševanja Rosler BF 40/40 - Stroj omogoča delo z najtršimi GH ostrorobimi mediji - Lopatice turbine iz karbidne trdine zagotavljajo 30.000 h delovanja - Zaščitni pokrovi turbin iz karbidne trdine še dodatno zagotavljajo odpornost proti obrabi ohišja stroja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Na voljo je stroj za polnjenje in zapiranje velikih pločevink JBT FoodTech iz živilske industrije. Teža pločevinke: 750g/1000g, vsebina: sladkano kondenzirano mleko, največja zmogljivost: 600 pločevink/min, polnilne glave: 22, zapiralne glave: 5, izvedba: monoblok, upravljanje: Siemens. Dokumentacija je na voljo. Možen ogled na lokaciji. Iiodpfx Asy N Uv Sob Aob

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 200 mm, pomik po osi Z: 300 mm, teža obdelovanca (maks.): 500 kg, skupna višina: 2.400 mm, skupna širina: 1.600 mm, skupna dolžina: 1.500 mm, širina mize: 500 mm, vrsta vhodnega toka: trifazni, tabela razdalje do vretena: 550 mm, dolžina obdelovanca (maks.): 800 mm, širina obdelovanca (maks.): 480 mm, višina obdelovanca (maks.): 250 mm, dolžina elektro omare: 880 mm, širina krmilne omare: 700 mm, višina krmilne omare: 1.860 mm, vhodna napetost: 400 V, skupna masa: 1.240 kg, kapaciteta rezervoarja: 280 l, Oprema: dokumentacija / priročnik, Sinker EDM Machine CM323Z Technical Data Max. travel distance (table, X x Y): 300 x 200 mm Max. travel distance (head, Z): 300 mm Orbital movement (deflection) U-V travel: ± 5 mm Distance head/table: 250 to 550 mm Table size: 500 x 350 mm Max. workpiece weight: 500 kg Work tank size: 820 x 500 x 300 mm Tank capacity (dielectric): 280 l Max. electrode weight: 15 kg Smooth linear guides Glass scales on all 3 axes Required space (W x D x H): approx. 1600 x 1500 x 2400 mm Weight: 1000 kg Generator / Power Supply Unit 75 EZ Technical Data Max. working current: 75 A Power consumption: 5 kVA Max. possible feed rate: 550 mm³/min Achievable surface finish: 0.45 µm/Ra Electrode wear rate: 0.2 % Required space (W x D x H): approx. 700 x 880 x 1860 mm Weight: 240 kg Additional included options: Orbital and Z-axis deflection system – CNC controlled. The programmable Z-axis allows for roughing and finishing operations in one cycle; thread eroding is also possible. Fire extinguisher Permanent magnetic chuck 150 x 300 mm Fast tank filling Safety switch for tank door Manual quick-change chuck Included accessories: Quick-change system with approx. 20 electrode holders Electrode material: copper and graphite Drill chuck, collets Tool cabinet Dielectric fluid On-site training at our premises in 1110 Vienna included Iiodpfjy A If Tex Ab Ajb The machine was rarely used (1,083 operating hours) and is therefore in very good condition. It can be inspected and tested under power. Viewing during our business hours or by appointment is possible. Sale due to upcoming retirement.

Leto izdelave: 2023, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, ogrevalna zmogljivost: 72 kW (97,89 KM), Brewing system – 3-vessel brewhouse with extensive extra equipment: Mashing – Lautering – Boiling/Whirlpool Manufacturer: HGMC Year of manufacture: 2023 Net output volume: 1,200 L Width: approx. 6.50 m Depth: approx. 2.70 m Height: All vessels up to the interface with the condensate separator approx. 2.65 m (Mash tun and lauter tun plus height of condensate separator approx. 1.70 m) (Boil kettle plus height of pan vapor condenser approx. 0.35 m) Details: - Mash tun with agitator and 2-zone steam heating - Lauter tun with cutting mechanism and sparging nozzles, as well as lauter grant with precision valve, under-backwash nozzles, 4-section removable false bottom - Kettle/whirlpool with tangential inlet and 2-zone steam heating, plus kettle vapor condenser Isdpfxey Igzqj Ab Aoib - All vessels with sight glass, LED lighting, and CIP - Stainless steel platform with railing and staircase - Mash and wort pump - Control for mash agitator and cutting mechanism, mash and wort pump, as well as automated valve control for heating (individual heating zones can be closed manually via hand wheel) - 72kW electric steam generator with automatic water softener, built-in power meter, main circuit breaker, and individual fusing for each of the three heating elements - Plate heat exchanger - All piping routes can be manually switched via DN ball valves - Heating rate approx. 1 min/° - Spent grain discharge conveniently at working height with cutting mechanism support and spent grain shovel. Spent grain outlet with discharge plate - Generally excellently built and perfectly matched The system works flawlessly and delivers outstanding results. Lautering in particular operates remarkably well, and the heating capacity is more than sufficient. With the optionally available, electrically heated 1,000 L hot water tank (18kW), double batches are possible without issue. Price/performance ratio is unbeatable. Viewing can be arranged by appointment. The system can be tested on site by prior arrangement. Sale due to business closure.

Stanje: dober (rabljeno), Leto izdelave: 1994, številka stroja/vozila: 4422550994025, Ponudba 26088 Hidravlične škarje za profile in palice z izsekovalno napravo ter prebijalnim strojem Tehnični podatki: Iiedpsy Nk Rlofx Ab Aeb - Škarje za ploščato železo - Ploščato železo: 400 x 16 mm - ali: 300 x 18 mm - Škarje za profile - L- in T-profil pri 90°: 130 x 12 mm - Kvadratno / okroglo železo: 40 / 40 mm - Izsekovalna naprava - s kvadratnim izsekovalcem za pločevine do pribl.: 13 mm - Globina izseka pribl.: 70 mm - Širina izseka pribl.: 52 mm - Prebijalni stroj - Prebijalna sila pribl.: 60 t - Razdalja do hrdla: 400 mm - Hod pribl.: 10 do 50 mm - Prebija v jeklo do: Ø 31 pri 15 mm - Električni kontaktni omejevalnik - Različne prebijalne utore in matrice - Pogon: 400 V / 5,5 kW - Potrebna postavitvena površina: Š 1100 x V 2000 x G 1700 mm - Teža pribl.: 2100 kg

Stanje: rabljeno, Leto izdelave: 2016, Proizvajalec: Gernal Model: FTB-E-300x400 Tip: Kontinuirana cvrtnik / tunel za kuhanje Leto proizvodnje: 2016 Ročni in samodejni načini, upravljanje receptov, nastavitev temperature Moč motorja transporterja: 0.25 kW + 31 W Obtočna črpalka: 1.5 kW Črpalka za prenos: 1.5 kW Grelniki: 4 x 25 kW Varnostni termostat – MAX: 190 °C Kapaciteta olja: ± 650 L Iedpfx Ajy Sbt Asb Aoib Gravitacijsko polnjenje preko ročnega ventila Fiksna detekcija nivoja olja z alarmom v primeru nenormalnega nivoja Krogotok olja z obtočno črpalko in integrirano filtracijo Enostavno ročno odpiranje z utežjo Pokrov s šobami za čiščenje na mestu Stisnjen zrak: 6 barov Transportni trak: 1 zgornji pas / 1 spodnji pas - Nerjavni jekleni trak s prepletenimi žicami - Premer žice: 1,6 mm - Razmak žic: 5 mm - Spodnji pas opremljen z vodili - Nastavitev hitrosti traku (0 = min → 10,00 = max) - Fiksna razdalja med obema pasovoma - Zasukljiv za dostop do čiščenja preko 2 električnih cilindrov. Krmilna plošča Popolna tehnična dokumentacija Dimenzije: 525 x 180 x 265 cm

Stanje: pripravljen za uporabo (rabljen), Graf naprava za mokro peskanje, primerna za dodelavo orodij iz polnega trdega kovinskega materiala. Iisdpfoy Ibvpjx Ab Asb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Na voljo je modularni sistem za polnjenje in zapiranje vedra Wittmann Robot Systeme. Sestavni deli: dovod skladov vedra, pretvornik skladov vedra, ločevanje vedra, grablje in polnjenje, ustavljalec, dovod pokrovov, zapiranje, kontrola pokrovov in obračanje za nadaljnje transportne procese. Število formatov: 6, razporeditev formatov okrogli/pravokotni, premer okroglih vedra: 226 mm, višina okroglih vedra: 194 mm, najmanjše dimenzije pravokotnega vedra X/Y/Z: 195 mm/299 mm/170 mm, največje dimenzije pravokotnega vedra X/Y/Z: 302 mm/415 mm/220 mm, prostornina vedra: 5l/6l/10l/11l/16l. Vključuje pripadajoče transportne enote in motorje. Dokumentacija na voljo. Ogled na lokaciji je možen. Iijdpey N Ddljfx Ab Asb

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, It is important to note that a total of two welding machines and two CNC corner cleaning machines are available, resulting in two complete production lines. The machines are operational and still in daily use. CE conformity: Yes (CE marking on the machine) Power supply: 400 V Iiedpfx Abjyyavro Aeb Frequency: 50 Hz Power connection: 25 A Main switch: Industrial main switch with safety interlock Operating air pressure: 7 bar Main components: - 4 welding heads - Linear motion system - Profile clamping units - Welding plate system - Pneumatic pressing units - Electronic temperature control - Central control unit - Safety light curtain Operation: Profile clamping – inserting the heated welding plate – PVC melting – generating welding pressure – welding cooling – frame removal The system operates semi-automatically/automatically. Included: - Automatic head positioning - Pneumatic clamping system - Digital temperature control - PLC control - Control panel and industrial PC Control system: Industrial PC control Safety system: - Light curtain - Emergency stop button - Safety covers - CE conformity Still under power in Hungary, the system can be dismantled and delivered around June.

Stanje: skoraj kot novo (rabljeno), Atlas Copco / Scheugenpflug The entire system is unused and as new Type: VDS P6030 Automatic operation of a complete process from loading to unloading Mixing of two components (e.g. resin and hardener) directly within the process Precise application of material to defined positions on the workpiece Component handling via a 3-axis system (X, Y, Z) Operation in automatic, semi-automatic, and manual mode Technical data: Mains connection: 400 V AC, 50/60 Hz Rated current: 13.6 A Power consumption: 8.5 kVA Fuse protection: 3 × 32 A Control voltage: 24 V DC Operating pressure: 6 bar Pressure monitoring: 4 bar Compressed air connection: 6 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Air humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP21 Maximum foundation inclination: 0.05% Clearance around machine: 0.8 m Clearance in front of control cabinet: 1.2 m Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm Weight: 600 kg Sound pressure level: ≤ 70 dB(A) Type: A310 Technical data: Tank volume: 60 l resin and 20 l hardener Agitator in each tank Vacuum sensor per tank Level sensors incl. overfill protection Suction valve per tank Sight glass with illumination Vacuum degassing directly in tank Material circulation to prevent sedimentation Optional tank heating Pneumatically driven piston pumps Delivery volume approx. 294 cm³ per stroke 1 or 2 pumps per tank possible Continuous delivery with double pump system Pump variants: horizontal and vertical for highly viscous materials Vacuum generation via vacuum pump or ejector Oil separator to protect the vacuum pump Control via SCP touch panel Operating modes: automatic, pause, external control Material circulation during pause mode Connection to external control via interface possible Monitoring of production time, system availability, and material consumption Calculation of remaining material availability Power supply: 230 V or 400 V AC Operation outside EU possible with transformer Operating temperature: +5 °C to +40 °C With vacuum pump: +10 °C to +40 °C Air humidity: 10% to 80% Protection class: IP20 Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm Weight: approx. 400 kg Type: LP804 Technical data: Application: Conveying and processing of 1K and 2K dispensing materials (low to medium viscosity, also abrasive) Tanks: 50 and 20 liters Control voltage: 24 V DC Mains connection: as per circuit diagram Rated current: as per circuit diagram Power consumption: as per circuit diagram Iiodpsy Naf Eofx Ab Aob Fuse protection: as per circuit diagram Operating pressure: 6 bar Pressure monitoring: 4 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Air humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP54 Overall system protection class: IP20 Installation area: max. 0.5% inclination Clearance around system: 0.8 m Clearance in front of control cabinet: 1.2 m Width: 1500 mm x Height: 2050 mm x Depth: 770 mm Weight: 430 kg Noise level: ≤ 70 dB(A) Condition: unused Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors!) If you have further questions, we are happy to clarify by phone.

Stanje: zelo dobro (rabljeno), Hitrohodna radialna vrtalni stroj, radialni vrtalni stroj (rabljeno) Proizvajalec: Mikrosa Leto izdelave: 2001 Tip: SRB 35 Vrtalna zmogljivost: - Jeklo: 35 mm - Litoželezo: 40 mm Navoj: - Jeklo: M20 - Litoželezo: M24 Vpenjalno stožčasto vretena: MK 4 Obrati vretena: 20 – 2800 vrt./min., brezstopenjsko nastavljivo Samodejni pomik: brezstopenjsko nastavljiv Hod vretena: 140 mm Izteg ramena: 1000 mm Velikost mize: 1050 x 400 mm Ijdpfx Aey Skrzsb Aoib Premer stebra: 200 mm Vgradna višina: 600 mm Priključna moč: 7,8 kW Potrebni prostor cca: širina 1250 mm, globina 2100 mm, max višina 2700 mm Teža cca: 2000 kg Hidravlično vpenjanje Naprava za rezanje navojev Globinski omejevalnik Stranska vpenjalna površina Vrtalna glava 2 prestavni stopnji Stroj je v zelo ohranjenem stanju, ima zelo miren tek in je takoj pripravljen za uporabo. Viličar na voljo, prosto naloženo na tovornjak Ugoden prevoz možen Lokacija stroja: 48477 Hörstel

Stanje: zelo dobro (rabljeno), Ponujamo vam: Iedpfx Abjw Ra Hqj Asib Orodje za vtiskovanje za ustvarjanje oblikovne zveze Proizvajalec: HWR Tip: SOLIDStamp Prikazani dodatki, orodja in vpenjalna sredstva so vključeni v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje!

Stanje: zelo dobro (rabljeno), LDS / CTS Vibration Test System Model: V895-440 HBT SP + CTS CV-70/1700-10 Manufacturer: Ling Dynamic Systems (LDS) / CTS For sale is a complete electrodynamic vibration testing system, consisting of LDS shaker, SPA56K power amplifier, K2+ control system, and CTS climate chamber. Ideal for combined vibration and climate testing in industry, automotive, aerospace, as well as research and development. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Model: V895-440 HBT SP Air-cooled vibrator Armature diameter: 440 mm Frequency range: DC – 2100 Hz Sine force: 55.6 kN Shock force: 166.8 kN Max. acceleration: 981 m/s² Max. velocity: 1.6 m/s Displacement: 63.5 mm pk-pk Payload: approx. 700 kg Air-suspended and vibration-isolated system. Compressed air supply required. Power Amplifier Manufacturer: LDS Model: SPA56K v3 V890/5 Class-D high-power switching amplifier Industrial air-cooled version Supply voltage: 415 V Max. power consumption: 86.9 kVA Efficiency: > 90% Controller display: Amplifier: SPA8/16K_v3 Vibrator: V830_185 Control System IMV K2+ Vibration Control System Multi-channel control system incl. Dell Precision PC system, monitor, keyboard, and mouse CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme Model: CV-70/1700-10 Year of manufacture: 03/2020 Temperature range: -70 °C to +180 °C Humidity range: 10% to 95% r.h. Ijdpfx Ajy Iwp Ssb Ajib Volume: approx. 1700 liters Nominal voltage: 400 V / 3/N / 50 Hz Power: 21.9 kW Nominal current: 37.1 A Refrigerants: R452A: 9.5 kg R23: 3.7 kg Equipment Combined climate and vibration testing Slip table / mounting table included Vibration-isolated installation Programmable operation possible Slip table 760 mm x 850 mm Threaded insert spacing 100 mm Activated licenses: Excitation types: Sine, Resonance Dwell, Limit Control, Amplitude Dwell Multi Sweep Sine, Noise Soft-Clipping, Sine-on-Random PSD Limit Control, Shock Extensions: Scheduler, Multi-Language, Launcher, System Monitor Weight Shaker: approx. 3.0 – 3.2 t Total weight: approx. 6,000 – 7,000 kg Condition Used system System was last in operation System powers up / control is active Inspection under power possible Scope of delivery LDS V895-440 HBT SP shaker LDS SPA56K amplifier IMV K2+ system Complete PC system CTS climate chamber Accessories as per pictures Loading possible. Sale without warranty. Subject to prior sale and changes.

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Ponujamo to uporabljeno portalno rezkalni stroj HAAS GR-510, letnik 2015. Isdsyxx Azepfx Ab Ajib Možnosti stroja: Menjalniki orodij: - Menjalec orodij z 20 mesti (karuselski) 4. | 5. os: - Pogon in ožičenje za 4. os Merjenje: - Brezžični intuitivni merilni sistem Upravljanje ostružkov in hladilne tekočine: - Zaščita pred ostružki in hladilno tekočino - Gantry Router hladilni sistem - Programabilna šoba za hladilno tekočino Haas upravljanje: - Modul za zgodnje zaznavanje izpada električne energije - Tog rezkanje navojev Možnosti produkta: - 6" povečana višina Z-osi - Jeklena miza - metrična izvedba Dediščinske možnosti: - Oprijemala orodij v stilu CT - Vreteno 10.000 vrt/min, 15 KM - Daljinsko upravljanje z barvnim LCD zaslonom

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Naprava za rezanje profilnih tirnic ALFRA PSG 5+ je letnik 2015 in ima hidravlični nastavek. S pomočjo dolžinskega omejevalnika je mogoče profile natančno in ponovljivo rezati na želeno dolžino. Na hidravlični nastavek je priključena elektrohidravlična črpalka ALFRA 120, ki je del ponudbe. Del kompleta je tudi delovna miza. Iiodpfx Abeyyxp Rj Aob Naprava je bila preverjena glede delovanja in ima opravljen elektro pregled, ki ga je izvedlo specializirano elektro podjetje.

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 10.900 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 19.000 kg, Model: Doppstadt AK 510 BioPower High-Speed Shredder Year of manufacture: 06/2015 Serial number: 983 Location: North Rhine-Westphalia (NRW) Operating hours: approx. 10,900 h Availability: short-term, by arrangement Standard equipment: - Central axle trailer chassis for 80 km/h - Brake system with ABS according to EC directive - 50 mm EC towing eye, bolt-on coupling - Tyres 285/65 R 22.5 - Permissible total weight: 19,000 kg - Mercedes-Benz engine OM 460 LA, 375 kW at 2,000 rpm. Emissions standard Euro Stage III B - Load-dependent feed control including automatic scraper floor reversal - 600-litre fuel tank - Complete radio remote control - Hydraulic drive - Hydraulic support legs - Separate drive for feed roller/scraper floor "TwinDrive" - Painted RAL 2011 deep orange Condition of the machine: The machine is in technically and visually good, ready-to-use condition. New diesel engine installed at 10,310 hours! Warranty: Iisdpfxoy Sam Uj Ab Aob The machine is sold in the condition existing at the time of handover. The seller accepts no liability for defects.

Stanje: pripravljen za uporabo (rabljen), ASYST CNC-naprava za profiliranje in ravnanje Iisdpfx Ajy Edc Tsb Asb Tip: APNC 400 Leto izdelave: 2003 Naprava je funkcionalna; kot rezervna ali za nadomestne dele

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2231, potovalna razdalja osi X: 500 mm, pomik osi Y: 300 mm, pomik po osi Z: 300 mm, skupna višina: 2.200 mm, skupna širina: 2.400 mm, skupna dolžina: 3.500 mm, širina mize: 400 mm, dolžina mize: 820 mm, skupna masa: 5.000 kg, proizvajalec krmilnikov: EXERON, EXERON 312 potopna erozijska stroj - Obratovalna napetost: 230/400V - Frekvenca: 50 Hz - Priklop: 9 kVA - Miza s 4 utori - Vključno s kompletom različnih elektrod Iedpfx Ajy Dca Ijb Aoib Stroj je opremljen z avtomatskim menjalcem za 20 elektrod. Pozor: izdelek je treba obvezno prevzeti v terminu med 09. in 10.07.2026 na še dogovorjen datum. FCA D-75045 Walzbachtal Wössingen – naloženo na tovornjak.

Stanje: novo, Leto izdelave: 2026, Ultrazvočna pralna naprava – ultrazvočni čistilni stroj kupljeno iz stečajne mase – novo naprava, neuporabljena! Proizvajalec: Derui Ultrasonic Naprava v celoti izdelana iz nerjavečega jekla - Spodnji ultrazvok, multifrekvenčni: 25/45 kHz preklopno, moč (efektivna/vršna): 1.600/3.200 W - Ogrevanje nastavljivo do 80°C; moč: 2.500 W - Dimenzije košare: D x Š x V 530 x 400 x 300h mm - Dimenzije posode: D x Š x V 550 x 420 x 320h mm - Zunanje dimenzije: D x Š x V 650 x 560 x 830h mm - Teža naprave (prazna): 115 kg - Naprava je premična na kolesih Iijdpfx Abeyz N Exe Aeb - vključno z izoliranim pokrovom - vključno z 1 kosom košare iz nerjavečega jekla Brez jamstva, ker je kupljeno iz stečajne mase.

Stanje: novo, Leto izdelave: 2026, Ultrazvočna pralna naprava – Ultrazvočni čistilni stroj kupljen iz stečajne mase – nov, neuporabljen stroj! Proizvajalec Derui Ultrasonic Stroj v celoti izdelan iz nerjavečega jekla - Talni ultrazvok, večfrekvenčni: preklopno 25/45 kHz, moč (efektivna/vršna): 1.000/2.000 W Iodeyz Nu Tepfx Ab Aoib - Ogrevanje nastavljivo do 80°C; moč: 1.500 W - Mere košare: D x Š x V 400 x 350 x 280 mm - Mere bazena: D x Š x V 420 x 370 x 300 mm - Zunanje mere: D x Š x V 520 x 510 x 810 mm - Teža stroja (prazno) 85 kg - Stroj je premičen na kolesih - vključuje izoliran pokrov - vključuje 1 kos košare iz nerjavečega jekla Brez garancije, ker je kupljeno iz stečajne mase