Goebel Darmstadt Rezalnik In Rezalna Naprava Za Papirne Role nakup rabljenega (132.966)

Leto izdelave: 1991, stanje: rabljeno, Polnilni in zapiralni stroj za steklene steklenice za polnjenje piva ter gaziranih in negaziranih brezalkoholnih pijač s zapiranjem na kronski zamašek. Kapaciteta: približno 14.000 steklenic/uro. Formatni deli za Euro-, NRW-, Longneck- in Vichy-steklenice. Kjdpfx Ahevcqi No Ujlt Stroj (dodatno): 42 polnilnih mest Zmogljivost: 14.000 steklenic/uro Število polnilnih mest: 42 Napetost: 220/380 V Formati: Euro-, NRW-, Longneck- in Vichy-steklenice s kronskim zamaškom Smer teka: levo -> desno Upravljanje / krmiljenje: Siemens S5

Stanje: rabljeno, Leto izdelave: 2007, Prominent water treatment system, consisting of: 1. Softening: Raw water is supplied to the twin softener. Only one vessel is in operation at a time, while the other is in regeneration or on standby. In the softener, calcium and magnesium ions are replaced by sodium. The system is equipped with a volume counter, which switches to the other vessel once the preset quantity has been reached. Regeneration is carried out with brine from the brine tank. The residual hardness at the outlet is 0 °dH. Kledpfjw Uvdgex Ah Uot 2. Reverse Osmosis: The reverse osmosis unit fills the permeate tank with demineralized water (permeate). Depending on raw water quality, water temperature, membrane condition, and correct system settings, different conductivity levels and operating pressures are achieved. Upon commissioning, the following flow rates are set: permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. Permeate Tank and Ozonation: The non-pressurized 500 l permeate tank is equipped with adjustable level control. For ozone treatment, the water in the permeate tank circulates through an adjustable ozone dosing point. Ozone is produced by the ozone generator via silent electrical discharge from air and is available as an ozone/air mixture. Air and un-dissolved ozone rise to the top of the permeate tank and are discharged via the residual ozone destructor. For monitoring, redox potential and ozone measurements are taken downstream of the centrifugal pump. Ozone dosage is set via the touch panel. Control can be selected by either redox potential or ozone concentration. Additional machine information: water softening, reverse osmosis unit, ozone disinfection Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Max. operating pressure: 16 bar Power: 2 A Voltage: 230 V Frequency: 50 Hz Water supply: < 5 bar (cooling water) Compressed air: 5.5–6.5 bar (max. 10 bar); max. 0.37 Nm³/h Operation/control: Simatic S7-300, touch panel Installation: free-standing Base frame: fully assembled on pipe frame with dished ends Equipment: reverse osmosis unit, reaction tank complete with residual ozone destructor, ozone generator, ozone gas warning device, ozone and redox transmitters, control cabinets with PLC/control system

Stanje: rabljeno, Stroj (dodatno): Reverzna osmoza Permeatna zmogljivost: 8000 l/h Dovod: 10000 l/h Pretok koncentrata: 2000 l/h Maks. delovni tlak: 16 bar Moč: 6,5 kW Napetost: 3 x 380 - 415 V Kodpfjxzqulox Ah Uslt Frekvenca: 50 Hz Voda: Dovod 2,5 - 5 bar Upravljanje / Krmiljenje: Simatic S7-300 Osnovna konstrukcija: na okvirju iz nerjavečega jekla Oprema: filtracija za dezinfekcijo; dve cevi z membranskimi moduli; doziranje kemikalij z dvema dozirnima črpalkama; centrifugalna črpalka (Lowara); različne cevi, ventili in merilna tehnika; električna omarica z zaslonom na dotik.

Leto izdelave: 2016, stanje: rabljeno, Stroj za pranje steklenic za 7000 steklenic/uro Stroj (dodatno): Enostranski stroj za pranje steklenic Nazivna zmogljivost: 7000 steklenic/uro Pretočni čas: 22 min. Poraba toplote za ogrevanje: 1785400 kJ/h Poraba toplote med obratovanjem: 455000 kJ/h Moč: 29,5 kW Električni tok: 63 A Napetost: 230 / 400 V Frekvenca: 50 Hz Voda: 3 bar, 2,5 m³/h Stisnjen zrak: 6 bar, 40 l/min. Dolžina: 8,81 m Širina: 3,46 m Višina: 2,8 m Formati: 0,5 l Euro Ksdpfx Aew Tam Njh Uelt Razporeditev po slojih: 20 steklenic/vrstica, 132 vrstic Upravljanje / krmiljenje: PLC krmiljenje, upravljalna konzola Material: nerjavno jeklo Namestitev / položaj: prostostoječe Osnovna konstrukcija: samonosilno ohišje na nastavljivih nogah Oprema: PLC krmiljenje, menjalnik, črpalke, toplotni izmenjevalnik, odstranjevanje etiket, Teža: 13000 kg

Leto izdelave: 1994, stanje: rabljeno, Stroj za pranje zabojev Model: RWZ-30-Sonder z visokotlačnim čiščenjem, brez krtač Leto izdelave: 1994 Zmogljivost: 1500 zabojev/h Dodatna oprema: naprava za pranje zabojev Zmogljivost: 1500 zabojev/h Dolžina: 7600 mm Širina: 1500 mm Višina: 2700 mm Formati: modularni zaboj – vzdolžni potek Material: nerjaveče jeklo Postavitev: prostostoječa Periferija: 2 obračalca zabojev, 1 zbiralna škatla za drobce Kedpfx Ahsw Tax Eo Ujlt

Stanje: rabljeno, Leto izdelave: 1991, Machine (additional details): 50,000 bph, crown cork Rated output: 50,000 bottles/hour Formats: 0.33 l longneck, 0.5 l NRW bottles; crown cork Running direction: right to left Operation / Control: Siemens S5 Kodpfxovcqr Ro Ah Uolt Base design: level-controlled filler with return air tube Equipment: 120 filling stations, 24 capping stations, double pre-evacuation, high-pressure injection

Leto izdelave: 2001, stanje: rabljeno, Combined rinser and filler for 0.5 l, 1.0 l, and 1.5 l PET bottles. Capacity: 24,000 bottles/h. The rinser is connected to a chlorine dioxide dosing system and a sterile water supply. The filler is equipped with a screw capper. Filling volume is controlled via flow measurement. Liquid nitrogen dosing is possible via a mobile unit. Machine (additional info): PET bottle cleaning and filling line Capacity: 24,000 bottles/h Formats: 0.5 l, 1.0 l, and 1.5 l PET bottles Flow direction: left → right Operation / Control: Touch panel / Simatic S7 Material: predominantly stainless steel Configuration: free-standing Equipment: stainless steel enclosure, upward-opening plexiglass safety screen; 70 rinsing valves at the rinser; 80 filling valves; fill-level monitoring via IDM; Alcoa 28 mm Bericap capper; Prominent chlorine dioxide dosing; sterile water filtration unit, mobile liquid nitrogen dosing unit; pneumatic screw cap feeder (approx. 25 m); 2 basements for a total of 3 mesh box pallets. Kedpsx T Andefx Ah Ujlt

Stanje: rabljeno, Leto izdelave: 1990, Polnilni stroj za približno 8000 steklenic/uro Stroj (dodatno): stroj za polnjenje in zapiranje Zmogljivost cca: 8000 steklenic/uro Formati: 0,5 l euro steklenica, 0,33 l longneck steklenica, 0,5 l steklenica s preklopnim zamaškom Postavitev: prosto stoječa Oprema: 1 pred-evakuacija, polnjenje s kratko cevjo, zapiralec kronskih zamaškov Kledpfx Ahsw S T H Te Ujt

Stanje: rabljeno, Leto izdelave: 2000, Flaschenfüller Hersteller: Fa. Krones Kurzrohrfüller mit doppelter Vorevakuierung Modell: Mecafill VKVP 084-094 Baujahr: 2000 Der Verschließer läuft mit Twist off und Standard-Kronkorken. Maschine (Zusatz): Abfüll- und Verschlußmaschine Leistung: 30000 Fl/h Kledsw Tay Aspfx Ah Ust Länge: 7000 mm Breite: 4500 mm Höhe: 3800 mm Formate: 0,5L NRW, 0,33L Vichy, 0,33L Euro, 0,35L Limonade; Maschinenteilung: 84 Füllventile, 12 Verschliesser Laufrichtung: rechts -> links Bedienung / Steuerung: Simatic ET 200 M Material: überwiegend Edelstahl Lage / Position: frei stehend Basiskonstruktion: Vierkant-Rahmenkonstruktion auf Kalotten Ausstattung: 1 Verschliesser für Standard- und Twist Off-Kronkorken, 84 Füllventile, 12 Verschliesser, Schutzgehäuse mit Glastüren, Vakuumpumpe Peripherie: Kronkorkenzuführung, Füllstandskontrolle,

Stanje: rabljeno, Leto izdelave: 2013, 2-valjna drobilnica z zalogovnikom za drobljeni slad in 2 cevno-verižnima transporterjema. Zmogljivost za prevzem slada in drobilnico približno 500 kg/h, zmogljivost transporta drobljenega slada do mešalnika približno 1000 kg/h. Stroj (dodatek): z zalogovnikom in cevno-verižnima transporterjema Zmogljivost transporta slada približno: 500 kg/h Zmogljivost drobilnice približno: 500 kg/h Zmogljivost transporta drobljenca: 1000 kg/h Ksdpsw Tdygjfx Ah Uelt Prostornina zalogovnika za drobljenec približno: 450 kg Postavitev/pozicija: postavljeno na ravni tleh, drobilnica nameščena na zalogovniku Oprema: 1 cevno-verižni transporter od silosa do drobilnice, 1 cevno-verižni transporter od zalogovnika do kuhalnega kotla, 1 drobilnica za slad, 1 zalogovnik za drobljenec.

Stanje: rabljeno, Toplo izpiranje praznih steklenic od spodaj s šobami na 3-metrski čistilni progi za predpranje in dosego temperature polnjenja. Obrat steklenic na glavo na vstopu in izstopu iz stroja. Opremljen z vodnim rezervoarjem, grelcem in obtočno črpalko. Z dozirnimi priključki za nego vode. Stroj (dodatno): Predčiščenje steklenic z grelnim vodnim rezervoarjem Kljdow Tmmpepfx Ah Uot Kapaciteta polnilne linije: 5.000 steklenic/h Dolžina čistilne proge: 3 m Oprema: Obratnik steklenic; vodni rezervoar z grelcem, obtočna črpalka in dozirni priključki

Stanje: rabljeno, Leto izdelave: 2015, Elektronsko nadzorovan dvojni sistem za mehčanje vode brez delcev. Z dvema tlačnima posodama iz GFK. Prosto nastavljivi cikli z regeneracijo glede na čas ali količino. Z rezervoarjem za solnico. Kjdpfow U D S Eex Ah Uolt Stroj (dodatno): dvojni sistem z GFK-posodami, mehčanje z ionsko izmenjevalno smolo Obratovalni tlak: 8 bar Obratovalna temperatura: 40 °C Napetost: 230 V Frekvenca: 50 Hz Material: GFK-posode Oprema: predfilter, blok ventilov, vodomer, 2 x GFK-posoda, razne cevi

Leto izdelave: 1982, stanje: rabljeno, Cylindroconical 580 hl fermentation and storage tank – glycol-cooled, 1 x cone cooling, 3 x shell cooling. – Swivelling cone – stainless steel – insulated – short standing support ring Machine (additional info): Outdoor tanks Capacity: 580 hl Operating pressure: 2 bar Operating temperature: 20 °C Cooling surface: 29 m² (1 x cone cooling; 3 x shell cooling) Material: stainless steel Orientation/installation: upright Base design: short support ring Features: tank cooling; swivelling cone; insulation; support frame; outlet DN100; CIP connection; 2 x temperature probes; sample valve Kledpfx Ahsvcq A Aj Ujt

Stanje: rabljeno, Leto izdelave: 1993, Berkefeldov sistem za mehčanje vode: ionski izmenjevalec za zmanjšanje trdote zaradi kalcija in magnezija z 2 filtrnima rezervoarjema in solno posodo, primeren za neprekinjeno delovanje. Leto izdelave: 1993. Zmogljivost: 6000 l/h Dodatno: ionski izmenjevalec Zmogljivost: 6000 l/h Klsdsw Uc Ewjpfx Ah Uot Obratovalni nadtlak: 10 bar

Leto izdelave: 2017, stanje: rabljeno, Steklenična drobilna naprava (FZA) "Solo Spezial" z ročnim podajanjem in integrirano zvočno zaščitno škatlo za posodo za črepinje. S strani inšpektorja izločene steklenice se lahko stroju neprekinjeno dovajajo preko transporterja. Stroj (dodatek): drobilnik stekla Moč: 3 kW Vhodna višina od tal: cca 1790 mm Klodpfeyr Idgex Ah Ust Raven zvočne moči: 103 dB, nivo emisijskega zvočnega tlaka ≤ 84 dB Napetost: 240 / 420 V Frekvenca: 50 Hz Dolžina: 2690 mm Širina: 1715 mm Višina: 1730 mm Formati: steklenice do 0,75 l Material: ohišje iz nerjavečega jekla Položaj/pozicija: prosto stoječ na kalotnih nogicah Osnovna konstrukcija: ograjen stroj z zaščito pred hrupom Oprema: motor za pogon drobilnika, upravljalna omarica, integrirana zvočno zaščitena škatla za posodo s črepinjami, drobilna enota Teža: 1130 kg

Stanje: rabljeno, Leto izdelave: 2021, Gravimetrično polnilo steklenic s kratko cevjo s 16 polnilnimi ventili in zapiralnikom za kronske zamaške. Upravljanje preko PLC Eaton. Stroj (dodatek): gravimetrično polnjenje in zapiranje s kronskimi zamaški Moč: 4,5 kW Napetost: 380 V Frekvenca: 50 Hz Stisnjen zrak: 14,4 Nm³/h, 5 - 6 bar, priključek 8 mm Dolžina: 2,30 m Širina: 1,42 m Višina: 2,50 m Formati: Longneck 0,33 l, Vichy 0,33 l, Steinie 0,33 l, Belge 0,75 l - kronski zamašek 26 mm Upravljanje: PLC Eaton Opremljenost: 16 polnilnih ventilov, 1 zapiralna postaja, priključek za pivovod DN32 Teža: 1800 kg Kledpfx Ahsxbpcho Uet

Leto izdelave: 2012, stanje: rabljeno, 3 kosov cilindrokoničnih fermentacijskih in skladiščnih rezervoarjev z robovi in stožčastim hlajenjem Stroj (dodatno): 3 kosi, z robnim in stožčastim hlajenjem Skupna prostornina: 3000 l Tlačna kapaciteta: 3 bara Dolžina: 2350 mm Širina: 2200 mm Kodpfxoxwy Tpo Ah Uolt Višina: 3710 mm Material: nerjaveče jeklo Osnovna konstrukcija: stojijo na nogah Oprema: robno in stožčasto hlajenje, pipa za vzorčenje, DN50 priključek, plošča z ventili;

Stanje: rabljeno, Leto izdelave: 1994, Troslojni sistem za degazaciju vode za odstranjevanje plinov iz vode in impregnacijo s CO2. Surova voda vstopi skozi injektorsko šobo v prvi rezervoar za degazacijo. Zaradi visoke hitrosti toka se kisik in dušik izločita iz vodnega curka in uhajata na vrhu rezervoarja. Ta postopek se ponovi v drugem rezervoarju za degazacijo. V tretjem rezervoarju (rezervoar za impregnacijo) se voda po vstopu skozi injektorsko šobo meša z CO2 pod tlakom za impregnacijo v zgornjem delu rezervoarja. Stroj (dodatek): večstopenjska hladna degazacija z impregnacijo Osnovna konstrukcija: na okvirju iz nerjavnega jekla Oprema: 3 rezervoarji (vsak z manometrom); 3 centrifugalne črpalke; električna omarica z upravljalno ploščo; cevovodi z raznimi armaturami. Kodpfx Ahexzqt Io Ujlt

Stanje: rabljeno, Leto izdelave: 1995, Concentration plant for the juice industry. The plant was originally built in 1977 and was rebuilt in 1992. During the rebuild, it was expanded and equipped with a new cooling tower circuit. The plant is designed for 6,600 kg/h of cloudy apple juice. In single-stage concentration, the juice is thickened from 12° to 25° Brix. In the second pass, up to 71° Brix can be achieved. Kedpfx Ahewu N T Ao Uslt Machine (additional feature): Concentration plant with aroma recovery Input quantity (apple juice): 6,600 kg/h Water evaporation: 4,840 kg/h Output quantity (juice concentrate): 1,760 kg/h Steam consumption: 1,685 kg/h Length: 7.70 m Width: 6.70 m

Stanje: rabljeno, Wasserenthärtungsanlage mit zwei separat stehenden Behältern, jeweils befüllt mit 36,5 kg Ionentauscherharz. Im Normalbetrieb gelangt das Rohwasser zunächst in eine der beiden Enthärterflaschen und danach zum Verbraucher, während die zweite Flasche im regenerierten Zustand auf "stand-by" ist. Bei Erschöpfung des Harzes wird es automatisch mit gesättigter Sole regeneriert und danach aus beiden Richtungen mit Rohwasser gespült. Anschließend wechselt die Anlage automatisch zurück in den Betriebsmodus. Der Zeitpunkt einer Regeneration kann auch per Timer eingestellt werden. Maschine (Zusatz): mit automatischer Regenerierung Nenndurchfluss: 9800 l/h Druckarbeitsbereich: 6 bar Druckklasse: 8,5 bar Zul. Betriebstemperatur: 25 °C Zul. Umgebungstemperatur: 35 °C Strom: 0,35 A Spannung: 230 V Klodow Tbunopfx Ah Uet Frequenz: 50 Hz Ausstattung: 2 x Enthärtungsbehälter (harzgefüllt); Solebehälter; Ventile und Leitungen Gewicht: 390 kg

Stanje: rabljeno, Leto izdelave: 2012, Automated Plant / Application Areas: Chrome plating, Nickel plating, Copper plating / Program Stages: Pre-cleaning, Pretreatment, Metallization, Post-treatment / Base Materials: ABS and ABSPC / Technical Data: Work window per carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters galvanic surface per carrier, cycle time 3.00 min. per system, cycle time 2.50 min. for demetallization / Performance: 20 carriers per hour, clear anode/anode spacing (chrome) 700 mm, (copper) 700 mm, (nickel) 700 mm, clear entry dimension 550 mm (direction of travel), 3100 mm (width), bath dimensions (rinsing) 3100 mm x 700 mm / Power consumption: Drives: conveyor system 133 KW, filtration 194 KW, exhaust air 229 KW, wastewater plant 150 KW, control cabinets 704 KW, rectifiers approx. 3190 KW, heating power approx. 1410 KW / Consists of: automatic loading system with 135 carriers, 5 loading and unloading stations, wastewater treatment plant and exhaust air system / Tanks, electroplating baths, and exhaust air system made of chemically resistant plastics. NOTE: Various ongoing expansions and modernizations of the plastic electroplating facility since 2015! Ksdpfxey Rvtue Ah Uslt

Stanje: rabljeno, Length 5000 mm Height 2800 mm Range+Heine Painting System for coating individual wooden window components and frames For sale on behalf of customer ----- Technical Manufacturer Description: Part dimensions: Length: 5,000 mm Height: 2,800 mm Width: max. 100 mm Coating system: Designed for use with material from the respective paint manufacturer with a low solvent content (VOC value), water-based and non-flammable. Capacity: min. 40 traverse carriers per shift, i.e., approx. 60 window units/shift (without forced drying) Process (1 cycle runs through twice): - Flooding - Drying - Checking/applying joint sealant - Spraying - Drying ----- Pos 1 Conveyor Technology 1 Power + Free circular conveyor Layout as per drawing 11-138-010a Main components include: 3 drives with geared motors for the main chains with frequency-controlled speed (see layout). Various running rails, horizontal bends, chains tensioning stations, pneumatically/electrically controlled stop stations 50 traverse carriers, 5,000 mm long (max. weight 250 kg) Automatic tilting of traverse carriers in the drip-off area after the flooding station 1 Conveyor control system (Siemens S7-300 PLC) Programmable buffer stocks Infinitely variable drive speed. 1 Lifting/lowering station for loading/unloading of workpieces (max. lift 2,000 mm) 1 set of steel construction for mounting the conveyor system ----- Klodpfx Ajy Ty E Heh Uet Pos 2 Flooding System 1 Flowcomat II-P 1 unit for colorless priming Maximum workpiece width approx.: 180 mm comprising: 1 coating tunnel 1 Flowcodrive swivel mechanism 2 flooding lances, each equipped with max. 3 nozzles 1 accessories for cleaning the system 1 external stainless steel sieve 1 paint supply 1 control unit ----- Pos 3 Additions to the Flooding System 1 drip tray and surface in the evaporation area behind the flooding unit After flood coating, the traverse carriers move into a drip buffer. The dripping coating material is collected in a PP (non-stick) catch tray and channel and returned to the flooding unit. Rinse water is collected and pumped out of the unit. Due to all paint-contacting areas being executed in PP, cleaning dried-on paints is easy. 1 humidification system 1 controller for the humidification unit Complete with controller for humidification quantity 1 hygrostat for measuring room humidity and activating the humidification nozzles 3 humidification nozzles for the drip buffer 1 coagulation system 1 coagulation system R+H waco 200 – 200 l collection tank ----- Pos 4 Top Coat Spray Booths 2 spray booths for topcoat application 2 extraction walls with sandwich panel cladding as per working area Ventilator 16,000 m³/h Filter area: - 3 sets Ecola pre-separators - 1 set Paintstop filters - 1 set pocket filters Recirculating air distribution ceiling with clamping frame design Volume: 12,000 m³/h approx. 75% recirculated air / 25% exhaust air operation (the exhaust air is extracted from the hall) installed on a customer-supplied foundation as per layout 2 Prolac overspray recovery columns ----- Pos 5 Addition to Top Coat Spray Booths 3 humidification nozzles for the evaporation area after top coat application -----

Stanje: rabljeno, NAKAMURA-TOME NTRX 300 ist ein Bearbeitungs- und Drehzentrum für Stangen, ausgelegt für Präzision, hohe Genauigkeit und zuverlässigen Dauereinsatz. Hauptkapazitäten: 6 Achsen (5 simultan), Z 1125 mm, X 700 mm, Y ±125 mm, B 225°, C 360° Auflösung 0,001; Werkstücke bis L 1100 mm, Ø 640 mm; Werkzeugmagazin 40 Plätze, Ø Werkzeug max 90 mm, Länge 300 mm. Technische Daten: Aufnahme Capto C6, Hauptspindel bis 4500 min⁻¹, Frässpindel bis 8000 min⁻¹, Spindelmotor 15/11 kW, Eilgang 36 m/min, Druckluft 5–7 bar, 3x400 V 50 Hz, Gesamtleistung 65,1 kVA, Gewicht ~18000 kg, Abmessungen 4530×2670×2615 mm. Zubehör: Kühleinrichtung, Papierfilter, Satz Werkzeughalter, Fräser, Bohrer, Lampe, Ölnebelabsaugung, Stangenlader. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizintechnik, Uhren- und Werkzeugbau. Kledpfxjy S A Rpo Ah Ust

Stanje: rabljeno, Leto izdelave: 2014, Used machine Year of manufacture: 2014 Features and technical data: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-off, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis CNC controlled, with working length 1300 mm, max. traverse speed 105 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5-40 mm - Dowel insertion projection adjustable from 7-20 mm via mechanical digital counter; drilling depth from 0-35 mm (with drill bit length GL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indicator in the glue container - 1 pc. left side stop, 1 pc. right side stop, and 1 pc. center stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic inclined clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm Ksdpoy Ih Skofx Ah Ujlt - 1 pc. extraction hood, connection Ø 80 mm 1 pc. TCT control unit with: Integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensions, automatic workpiece mirroring and process optimization, 4 work fields assignable with different programs, graphic workpiece display, parametric programming, zero-point shifting, programmable job lists, error diagnosis in plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with CNC-controlled, dynamic positioning for height adjustment of drilling and dowel insertion station (programmable from 5-40 mm) Traverse speed max. 30 mm/sec. 1 single-spindle vertical drilling unit from above, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, max. drilling depth (Z) 30 mm (with drill bit length GL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) 4 vertical inclined clamping cylinders 10° with mount, additionally 1 keyboard with mount Availability: by arrangement; currently being overhauled at the Ganner factory Location: Austria

Stanje: rabljeno, Rabljeni stroj z 2 diski za poliranje Premer diskov cca 500 mm Ksdpfxsy Nug De Ah Uolt Debelina diskov cca 80 mm Motor 400 V Razpoložljivost: kratkoročno Lokacija skladišča: Röllbach