Ca. 18,45 Lfm Kragarmregal Doppelseitig H:400 Cm 500 Kg/Arm nakup rabljenega (110.019)

Stanje: rabljeno, skupna masa: 2.500 kg, nosilnost: 400 kg, doseg roke: 2.550 mm, model krmilnika: IRC5, ABB IRB 7600 – 400/2.55 je visoko zmogljiv industrijski robot, zasnovan za zahtevne operacije, ki zahtevajo moč in natančnost. Z zmogljivostjo 400 kg in dosegom 2,55 m izstopa po stabilnosti in zanesljivosti tudi v zahtevnih okoljih. Njegova robustna konstrukcija in krmilnik IRC5 zagotavljata optimalno zmogljivost ter enostavno programiranje prek RAPID. Idealen je za rokovanje s težkimi kosi, orodji, motorji ali karoserijami pri nalaganju, montaži ali obdelavi. Knsdpfx Asxp Hyajczjb

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5.000 h, Peč za kaljenje in popuščanje verižnega traku za kontinuirano litje z online predpranjem in naknadnim pranjem ter popolnoma avtomatskim SCADA nadzorom. Knedpfozbiqgjx Aczob

Stanje: rabljeno, Leto izdelave: 2016, Pregled Ta tračna preša je bila izdelana leta 2016 s strani podjetja SRAML. Stroj je zasnovan za neprekinjeno pridobivanje soka iz zdrobljenih jabolk s pomočjo neprekinjenega tračnega prešnega sistema. Tračna preša SRAML TP50 je dobavljena skupaj z mehaničnim, samočistilnim filtrom SRAML JF1500, ki odstranjuje nečistoče, kot so peške in peclji. Bila je v delovnem stanju, ko so jo umaknili iz redne proizvodnje, in je bila vzdrževana kot rezervna naprava. Stroj so nadomestili s prešo večje zmogljivosti. Tehnični podatki - Zmogljivost: 700 kg/h (jabolka) - Uporaba: Pridobivanje soka iz zdrobljenih jabolk - Konfiguracija: Neprekinjen tračni prešni sistem z mehaničnim, samočistilnim filtracijskim sistemom Knedpfszpffhsx Aczob - Filtracijski sistem: Mehanični, samočistilni filter za odstranjevanje pešk in pecljev Obseg dobave - Tračna preša | SRAML | TP50 | 700 kg/h | 2016 - Samočiščeči filter | SRAML | JF1500 | Odstranjevanje pešk in pecljev | 2016 - Rezervni deli | Trakovi, valji, ležaji, samočistilni filtri s črpalko, menjalnikom, 0,75 kW motorjem in drugimi potrošnimi deli

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Knjdpfxemhh Dho Aczjb Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Knedpfx Asmhhl Hjczeb Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: zelo dobro (rabljeno), Weishaupt WM-L20/1a. 1400 kW. 118 kg/h. Letnik 2008. Kjdpfxoig Tw Nj Aczsnb

Leto izdelave: 2021, stanje: novo, Cantilever racking, single-sided, 6.30m height, 1.20m arms, 500kg per arm – New – : Price ex works incl. loading! 1 racking unit with 4 uprights €4,115 (net)! Transport costs within Germany (excluding islands): €490 (net)! Of course, by omitting or purchasing additional frames, you can configure longer or shorter racking units (also possible by varying the bay spacing); the example with 4 frames is merely the most common rack solution! A hot-dip galvanized cantilever racking system, comprising: Single-sided upright approx. 6,300 mm high, hot-dip galvanized Foot and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms Load capacity with load centre 600 mm: 500 kg per arm / 4,000 kg per upright With 4 uprights per storage level: 4 x 500kg = 2,000 kg Profiles: Uprights: IPE220, Arms: IPE 80 With longitudinal and diagonal bracing, bay spacing = 1,300mm; standard is 1.30m. Knodpfxjfivg Rs Aczjb Other standard bay spacings available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! For bay spacings 1.50m and above, a small surcharge will apply to the stated price! Special sizes (other bay spacings) are also available on request, but incur extra charges and have a longer delivery time as they are custom manufactured! If you do not specify otherwise, we deliver the racking with a bay spacing of 1.30m. In this configuration, an installation with 4 uprights (3 bays) is approx. 4m in length. Delivery includes all bolts and nuts (dispatched within Germany by parcel directly from Würth), but excludes floor anchors. Other configurations (upright height, arm length, arm types, etc.) available! Please contact us!

Stanje: rabljeno, Electric chain hoist, electric lifting gear, crane GIS type 150 / F Serial no.: 1502802 Year of manufacture: 1981 Lifting capacity: 1,500 kg Hook path: 4 meters Main hoisting speed: 4 m/min Creep/precision hoisting speed: 1 m/min - Electric trolley for use with I-beams (double T-girders) with single travel speed - 2 load chains Knjdpfx Acsgi E Evezob Good condition

Leto izdelave: 2021, stanje: novo, Cantilever Racking, Double-Sided, 3.50m Height, 1.20m Arms, 500kg per Arm – NEW –: Price ex works including loading! 1 racking unit with 4 uprights: €2,899 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can construct longer or shorter racking units (or by using different bay distances). The example with 4 uprights is simply the most common racking solution! Knodpoddmtcjfx Aczob A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 3.50m high, hot-dip galvanized (IPE 160/80) - Each with 2 x 3 adjustable arms, 1.20m length, 500kg load capacity per arm - With bracing approx. 1.30m - Uprights double-sided, approx. 3,500mm high, hot-dip galvanized - Foot and arm depth 1,200mm, each with 3 height-adjustable cantilever arms - Load capacity with center of gravity at 600mm: 500kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay width = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m - From bay width 1.50m upwards, a small surcharge applies to the listed price - Special dimensions (different bay distances) also available upon request, but with surcharge and longer lead time as these are custom-made If you do not specify a different bay width, the rack will be supplied with a bay width of 1.30m. In this configuration, a rack row with 4 uprights (3 bays) is approx. 4m long. Supplied with all screws and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Leto izdelave: 2021, stanje: novo, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm – NEW –: Price ex works incl. loading! 1 rack unit with 4 uprights: €3,875 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can build longer or shorter rack units (or by using different centre distances); this example with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: Knedpfx Acoddmq Tezjb - 4 double-sided uprights approx. 5.18m high, hot-dip galvanized - IPE 180 / 80 - Each with 2x3 adjustable arms, 1.20m length, 500kg load capacity per arm - With cross bracing approx. 1.30m - Double-sided uprights approx. 5180mm high, hot-dip galvanized - Base and arm depth: 1,200mm, each with 3 height-adjustable cantilever arms - Load capacity with load center at 600mm: 500kg per arm / 2,600kg per upright side - With longitudinal and diagonal bracing, centre distance = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - For lengths from 1.50m, a small surcharge applies to the listed price! - Special sizes (different centre distances) available on request for an additional charge and longer delivery times, as they must be custom-manufactured! - If you do not specify otherwise, we will supply the rack with a centre distance of 1.30m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. - Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!

Leto izdelave: 2021, stanje: novo, The prices stated in this advertisement reflect the rates as of mid-2021. Due to the current international situation, the prices of steel and transportation are increasing almost daily. The availability of raw steel is strained and currently unpredictable. Therefore, we kindly ask you to inquire about current prices and availability! Kodpfx Asddmr Nsczonb We are happy to provide you with a current quotation! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm – NEW –: Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transportation price within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional uprights you can configure longer or shorter rack units (or adjust the axle spacing accordingly); this example with 4 uprights is just the most common rack solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 80 - Each with 2x3 adjustable arms, 1.20 m, load capacity 500kg per arm - With bracing approx. 1.30 m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200 mm, each with 3 height-adjustable cantilever arms - Load capacity at load center 600 mm: 500 kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, axle distance = 1300mm, standard is 1.30m - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m, a small surcharge applies to the quoted price! - Special dimensions (other axle spacings) are also available on request, but also incur a surcharge and have a longer delivery time as they must be specially manufactured! - If you do not specify a different axle spacing, we deliver the rack with an axle spacing of 1.30m. - In this case, the length for a rack row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors.

Stanje: rabljeno, Wall-mounted slewing crane DEMAG type KBK 2 Demag serial no. jib arm: KBK-982 040 44 Demag serial no. wall bracket: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Jib outreach: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height underside jib to top edge wall bracket: 1000 mm Flange plate wall bracket to centre of pin: 270 mm Total length flange plate wall bracket to jib tip: 4330 mm - Jib profile C-profile rail DEMAG KBK 2 - Trolley for C-profile rail DEMAG KBK 2 - Original paint, yellow Kodpotqwrvjfx Aczsnb Dead weight: 170 kg In very good condition Price without chain hoist – Chain hoist or crane also available in the shop.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 1.500 kg, Oprema: nožno daljinsko upravljanje, 3-osni varilni vrtljivi stroj PEMA APS 1500 - neprekinljivo nastavljiva višina - vključuje ročni daljinski upravljalnik - maksimalna nosilnost 15.000 N - 1.500 kg - hitrost vrtenja 0,07 - 1,3 obr/min - rotacijski navor 1.000 Nm - hidravlično nagibanje do 135° - moment nagiba 3.000 N - maksimalni varilni tok 700 A - premer plošče 700 mm - višina 780 - 1.550 mm Kodpfxjyupd Hj Aczenb - mere 1.640 x 810 mm - priključek 3 x 400 V / CEE 16A - teža 730 kg

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 6.500 kg, Lifting capacity 6,500 kg Note: Arm diameter adjustable from 1,880 mm to 4,550 mm (pivotable) Space-saving and continuously adjustable; the boom arms can be locked Ksdswd Twqepfx Aczenb Speed infinitely variable from 0.001 to 5 rpm Motor power: 3 kW Torque: 15,000 Nm Height: 800 mm Maximum current transfer: 2,000 A Weight: 4,700 kg Comes with hand and dual foot remote control CE certificate, declaration of conformity, documentation, wiring diagram Includes original offer invoice from 2016 Current new price approx. €28,000

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: nefunkcionalno, nosilnost: 6.500 kg, Lifting capacity 6,500 kg Note: Arm diameter adjustable from 1,880 mm to 4,550 mm (pivotable) Space-saving and continuously adjustable; the boom arms can be locked Speed infinitely variable from 0.001 to 5 rpm Motor power: 3 kW Torque: 15,000 Nm Height: 800 mm Ksdpfx Asx Thuceczsnb Maximum current transfer: 2,000 A Weight: 4,700 kg Comes with hand and dual foot remote control CE certificate, declaration of conformity, documentation, wiring diagram Includes original offer invoice from 2016 Current new price approx. €28,000

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, številka stroja/vozila: DN-KR29, DEMAG KBK mostovna dvigala – mere približno 24 x 6 m Nosilnost / obremenitev 1x 500 kg - 0,5 t Tehnični podatki naprave: Mostovna dvigala s tirnicami Demag KBK2 / KBKII-H / KBKII-H-R Višina jeklene konstrukcije 4,52 m (ojačitev) Višina zgornjega roba jeklene konstrukcije (lež) 4,38 m Višina spodnjega roba jeklene konstrukcije (lež) 4,24 m Višina tirnice mostovne dvigale 3,84 m Višina mostu 3,6 m Višina kavlja 3,1 m Knodpfxezv E Dke Aczob Zunanje mere jeklene konstrukcije (potreben prostor) 24 x 6 m Razdalja med podstavki 8,7 + 7,5 + 8,2 m Mere mostovne dvigale približno 25 x 5,3 m Naprava se dobavi v celoti: Tirnice KBK, povezovalniki tirnic Podvozja, končne plošče, kabelska veriga, nosilci/obešniki itd. + celotna jeklena konstrukcija (HEA140/U140) vključno z verižnim dvigalom Abus GM 500 kg Mostovna dvigala je razstavljena in zapakirana na paleti. Lokacija artikla je 75053 Gondelsheim. Odlično stanje – skoraj novo. Glejte slike. Pošiljanje s špediterjem ali osebna prevzem po dogovoru. Tirnice Demag KBK1, KBK2 in KBK3 so na zalogi!

Stanje: zelo dobro (rabljeno), Na prodaj profesionalni posnemovalec/ukosevalnik za pločevino TRUMPF TruTool TKA 500 (1A1). Stroj je namenjen izdelavi posnetij za varjenje in obdelavi robov jeklenih pločevin. Rabljeno, tehnično brezhibno, običajni sledovi uporabe so vidni na fotografijah. Industrijski razred – izdelava Švica/Nemčija. Tehnični podatki Moč 1.400 W Napajanje 230 V / 50–60 Hz Tok 6,5 A Model TruTool TKA 500 (1A1) Leto izdelave 2009 Proizvajalec TRUMPF Uporaba Posnemanje robov pločevine pred varjenjem Poševno rezanje za V- in X-zvare Obdelava konstrukcijskega in strojegradbenega jekla Delavnice, proizvodnja, jeklene konstrukcije V kompletu Posnemovalec TRUMPF TruTool TKA 500 Originalni transportni kovček TRUMPF Dokumentacija/navodila proizvajalca Pribor, viden na fotografijah Naprava pripravljena za delo. Možnost preizkusa na mestu. Knodpfx Ajyhnukeczsb Pošiljanje ali osebni prevzem – po dogovoru.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors Knsdpfomhhy Nox Aczsb = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles Kodoh R Taqspfx Aczonb - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. Ksdpfx Acod Tbbdozjnb The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level. Kjdpod Tqalofx Aczenb

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. Knedpfefdkbhjx Aczob The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard Kodsfdkb Tspfx Aczjnb - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards Knedpfxjguk A He Aczsb - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) Kedpsfdkb Ujfx Aczjnb - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.