Trimwex Stranska Hidravlična Prensa nakup rabljenega (4.151)

Stanje: novo, Pressure: 100 t Stroke: 300 mm Table size: 1070 x 315 mm Clearance between uprights (between guides): 1070 mm Rapid approach speed: 8.0 mm/sec Working speed: 5.0 mm/sec Return speed: 10.0 mm/sec Oil capacity: 90.0 l Motor power: 5.5 kW Machine weight: approx. 1870 kg Space requirements: approx. 2050 x 1000 x 2200 mm Features: - Robust electro-hydraulic workshop press with adjustable cylinder - Ideally suited for aligning axles, shafts etc., as well as for pressing in and out pins, bearings, bushings and much more - Heavy-duty welded steel construction for high stress applications - Table height adjustment via piston rod Dsdpfx Aexaar Dsflskr * Includes round steel chain and 2x locking pins * Piston rod with metric mounting - 1 set of V-block prism supports - Manometer (pressure gauge) - Simple manual control with: * 1x rapid approach speed * 1x working speed * 1x return speed - Piston can be stopped in any position - Hydraulic tank mounted laterally - Operating manual

Stanje: novo, Pressure 60.0 t Stroke 250 mm Table surface 1040 x 370 (315) mm Frame opening between guides 1040 mm Approach speed 8.0 mm/sec Working speed 4.0 mm/sec Return speed 10.0 mm/sec Motor power 4.0 kW Machine weight approx. 800 kg Space requirement approx. 1,700 x 700 x 2,100 mm Equipment: - Robust electro-hydraulic workshop press with fixed cylinder - Ideally suited for straightening axles, shafts, etc., as well as press-fitting and removing pins, bearings, bushings, and more - Robust steel welded construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set V-block prism support - Pressure gauge for pressure indication - Simple manual control with: * 1x approach speed * 1x working speed * 1x return speed - Piston can be stopped in any position - Hydraulics tank mounted laterally Dksdpoxaakgofx Aflor - Operating manual

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Pressure: 150 t Stroke: 300 mm Table dimensions: 1070 x 290 mm Clear width between guide columns: 1070 mm Approach speed: 9.0 mm/sec Working speed: 5.0 mm/sec Return speed: 10.0 mm/sec Motor power: 11.0 kW Machine weight: approx. 1870 kg Dimensions (L x W x H): 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approx. 2 operating hours Condition: LIKE NEW Special price on request Equipment: - Robust electro-hydraulic workshop press with fixed cylinder - Ideally suited for straightening axles, shafts, etc., as well as for pressing in and out bolts, bearings, bushings, and much more - Heavy-duty welded steel construction for high load applications - Adjustable table height via piston rod * Includes round steel chain and 2x locking pins * Piston rod with metric fitting - 1x set of V-block prism supports - Pressure gauge for pressure display - Simple manual controls including: * 1x approach speed * 1x working speed * 1x return speed - Piston can be stopped in any position - Side-mounted hydraulic tank Dkedpfoxaabfex Afler - Operating manual

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Pressure: 80.0 t Stroke: 250 mm Table area: 1040 x 260 mm Frame clearance between guides: 1040 mm Approach speed: 8.0 mm/sec Working speed: 5.0 mm/sec Return speed: 10.0 mm/sec Motor power: 5.5 kW Machine weight: approx. 835 kg Dodsw U U Svopfx Afljkr Space requirement: approx. 1810 x 700 x 2100 mm Demo machine from 2023 with only approx. 2 operating hours Condition: like new Special price on request Equipment/Features: - Sturdy electro-hydraulic workshop press with fixed cylinder - Ideally suited for aligning axles, shafts, etc., as well as for pressing in and out of pins, bearings, bushings, and much more - Robust welded steel construction for high loads - Table height adjustment via piston rod * Incl. round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism supports - Pressure gauge for pressure display - Simple manual controls with: * 1x approach speed * 1x working speed * 1x return speed - Piston can be stopped at any position - Hydraulic tank mounted on the side - Operating manual

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7926 TEHNIČNI PODATKI - delovna dolžina: 6200 mm - delovna širina: 150 mm - delovna višina: 1350 mm - 12 vertikalnih hidravličnih cilindrov - mere d/š/v: 6580/1270/2350 mm - teža približno 4000 kg Dedpezmfvuefx Aflokr PREDNOSTI – zelo dobro stanje – rabljena preša – ni prebarvana – namenjena profesionalni uporabi Neto cena: 69.900 PLN Neto cena: 16.650 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (v primeru večjih valutnih nihanj se lahko cena spremeni)

Stanje: novo, Condition: New Delivery time: Approx. 12–14 weeks from order Country of origin: Turkey Price: €76,820 Leasing rate: €1,451.90 Pressing force: 160 tons Bending length: 4,050 mm Axes: Y1 / Y2 and X axis Stroke: 200 mm Distance between uprights: 3,600 mm Throat depth: 300 mm (side frame) Installation height: 430 mm Drive concept: Hydraulic Rapid traverse speed Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge travel X-axis: 620 mm Backgauge speed X-axis: 250 mm/s Table height: 858 mm Table width: 104 mm Motor power: 15 kW Dksdpfxswird Ho Aflor Length: 4,850 mm Width: 1,900 mm Height: 2,610 mm Weight: 10,500 kg 3 axes (Y1, Y2 and X axis) CNC CONTROL DT-10: - 10" 2D graphical display - Intuitive touch-screen operation (easy drawing of the bending contour by finger) - User-friendly dialogue-based programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet metal blank - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software allows programs to be written on a PC and then transferred to the machine by USB CNC-controlled backgauge with linear guides and ball screw spindles CNC-controlled crowning Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Fiessler AKAS laser safety device mounted on upper beam Sheet support arms Side and rear safety guards Equipment compliant with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model thanks to serial production of standardized models without any compromise on quality and accuracy OPTIONAL: CNC-controlled R-axis (X adjustment range = 500 mm) DBend, 3D CAD/CAM import and simulation software (supports step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Stanje: dober (rabljeno), Leto izdelave: 1990, Dolžina upogibanja: 14.000 mm Razmak med okvirji: 10.500 mm Krmiljenje: CYBELEC CNC 7000 z grafiko Širina mize: 1.000 mm Razdalja miza - pritisni nosilec min./maks.: 1.800 mm Krmiljene osi: Y1; Y2; X1; X2 Krmiljenje je bilo obnovljeno leta 2012 Skupna potrebna moč: 75 kW Teža stroja pribl. min.: 465 t Prostorske zahteve pribl.: 14.600 x 4.200 x 7.200 mm Dodatne informacije Dkodjzlnn Ropfx Aflsr - Razdalja miza/pritisni nosilec: 1.800 mm

Stanje: dober (rabljeno), Leto izdelave: 1975, stiskalna sila: 250 t, hod: 140 mm, širina mize: 750 mm, dolžina mize: 1.000 mm, Tiskalna sila: 250 t Iztek: 400 mm Hod: 30...140 mm Dodpfxezlnnwo Aflekr Velikost mize: 1000 x 750 mm Prehodna odprtina v mizi: 360 x 400 mm Površina batnice: 630 x 500 mm Nastavitev batnice: 110 mm Skupna potrebna moč: 18 kW Masa stroja pribl.: 16 t

Stanje: dober (rabljeno), Leto izdelave: 1994, stiskalna sila: 250 t, hod: 500 mm, širina mize: 630 mm, dolžina mize: 1.250 mm, Tlačna sila: 250 t Iztek: 360 mm Dsdpfx Aozlnndsflekr Velikost mize: 1250 x 630 mm Premer mize: 250 mm Vpenjalna površina bata: 850 x 450 mm Vgradna višina: 800 mm Hod bata: do 500 mm Premer bata: 400/360 mm Hitrost bata navzdol: 200 mm/s Hitrost bata navzgor: 110 mm/s Skupna potreba po moči: 20,5 kW Približna masa stroja: 8 t

Leto izdelave: 1970, stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 55703, SANDT 410 hidravlična strojna stiskalnica s nihajno roko – 18 ton Cena: 3.650 €, brez DDV Pogoji dostave: EXW Son en Breugel, Nizozemska Zelo dobro ohranjena in robustna nemška hidravlična strojna stiskalnica s nihajno roko, proizvajalec J. Sandt AG, Pirmasens. Primerna za rezanje materialov, kot so usnje, guma, plastika, pena, filc, tekstil, tesnilni material, pluta in karton. Tehnične specifikacije * Proizvajalec: J. Sandt AG * Model: 410 * Serijska številka: 55703 Dkjdpfx Afjzqhdioler * Leto proizvodnje: neznano, predvidoma konec 1960-ih * Rezalna sila: 18 ton * Delovna miza: 900 × 450 mm * Pritiskalna plošča nihajne roke: 550 × 350 mm * Merjena razdalja: približno 110 mm * Mehanska nastavitev višine z ročnim kolesom * Električno napajanje: 380 V, trifazno, 50 Hz Stroj je v čistem, uporabljenem stanju in je bil ponovno prebarvan. Na spodnji rezalni plošči in zgornji aluminijasti plošči so vidne sledi uporabe. Na zahtevo je mogoče izvesti strojno obdelavo in brušenje površine obeh plošč (spodnje in zgornje) za dodatnih 250 €. Stroj si lahko ogledate in preizkusite po predhodnem dogovoru. Možno je urediti natovarjanje stroja na vozilo kupca. Vse informacije so podane v najboljši možni obliki in jih je treba preveriti.

Stanje: rabljeno, Leto izdelave: 1959, Št. stroja: 670/848, sila stiskanja: 150 t, povratni hod: 30 mm, povratni čas: 190 ms, optična pregrada, proizvajalec: SICK, tip: LVU 1106-0021 Dksdozkav Dopfx Aflor +++ Pozor: Stroj je del spletne dražbe! +++

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, moč: 3 kW (4,08 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, stiskalna sila: 16 t, hod: 100 mm, širina mize: 440 mm, dolžina mize: 320 mm, razmak između stupova: 500 mm, kapaciteta rezervoarja za olje: 60 l, skupna dolžina: 1.040 mm, skupna širina: 1.030 mm, skupna višina: 2.000 mm, 16-tonska hidravlična stiskalnica v dobrem stanju na prodaj. HANS SCHOEN TES 16 dvostebrna hidravlična stiskalnica Leto izdelave: 1986 Tlačna sila: 160 kN Moč motorja: 3 kW, 380 V, 50 Hz Dvoročno upravljanje Višina postavitve: 280 mm Hod: 100 mm Širina mize: 440 mm Globina mize: 320 mm Mere stroja: Višina: 200 cm Dkodpfezf Ilcox Afler Širina: 103 cm Dolžina: 104 cm Teža: 1000 kg.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler model MG 50 T.V.E. 1200x1100x3500h for the compaction and formation of bales of soft waste materials, such as glass wool mats or similar. The MG 50 T.E. model features a fully enclosed compaction chamber; both the material loading door and bale extraction door can be opened. The electrical control panel is mounted on the side with integrated controls and comes with a 10 m extension cable, allowing it to be positioned away from the baler. The press plate is operated by a single cylinder with a 2700 mm stroke and is guided by 4 lateral sliding rails. Material is loaded from the front. The compaction cycle (downward and upward movement of the press) is automatic, operated by push button. - For transport, the machine is constructed in three sections: one of 2000 mm height, one around 2300 mm, and the cylinder, which will be assembled onsite. - Bale tying is preset-type, performed with the doors open, and is done manually; tying can be done with standard pre-cut wire or strapping through slots at the rear of the chamber. - Bale extraction is carried out using a forklift; dedicated channels at the base allow the forklift tines to be inserted. - The bale extraction door is closed via a handwheel, ensuring safe opening even with highly elastic materials; a microswitch ensures the door is securely closed before pressing. The upper door is equipped with a hydraulic lever closure with controls on the machine. - Can be installed against a wall; requires front access only for material loading and bale extraction. - The hydraulic circuit features a safety lock valve to prevent press plate descent. - The machine must be fixed to the ground and is positioned over a wash liquid collection tray. • Manufacturer / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Material pressing pressure: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: 1250 x 1150 mm, variable height (min 800, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Pressing chamber: 1200 x 1100 x 3500 mm Dodpsyzr Nmsfx Aflokr • Loading opening: 1200 x 1800 mm • Ram stroke: 2700 mm, single extension • Operation: Automatic, push button • Cycle time (automatic): 130 seconds • Manual ties: 5 • Bale ejection: Removed with forklift • Hydraulic unit: Integrated in press • Motor power: 10 Hp (7.5 kW) • Supply voltage: 380V, 50 Hz • Overall dimensions: 2000 x 3500 x 7150 mm • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used vertical hydraulic baler, in excellent condition, sold as seen and approved.

Stanje: rabljeno, Leto izdelave: 2019, Tlak 60,0 t Dolžina upogiba 1270 mm Razdalja med stojali 1000 mm Izstop stojala 410 mm Hitrost premika bata 160 mm/s Delovna hitrost 10,0 mm/s Hitrost vračanja 165 mm/s Delovna dolžina 275 mm Višina vgradnje 530 mm Višina mize 900 mm Širina mize 90,0 mm Zadnji opornik – nastavljiv 500 mm Krmilnik DA 66T Vsebnost olja 150 l Delovna napetost 380 V Moč motorja 7,5 kW Teža 4320 kg Dimenzije D-Š-V 2250 x 1960 x 2750 mm Aktualna nova cena približno 65.000 evrov Uporabljen le nekajkrat! Posebna cena na zahtevo - v preverjenem stanju - video stroja - ?v=KRifrqTgkVU ----- CNC upogibalni stroj SPEED BEND PRO: * povečana višina vgradnje * povečan hod cilindra * in povečane hitrosti upogibalnih orodij ----- Oprema: - CNC elektro-hidravlični upogibalni stroj - DELEM CNC krmilnik model "DA-66T" z grafičnim/na dotik občutljivim zaslonom * 2D grafični zaslon na dotik za programiranje * 3D prikaz v simulaciji in proizvodnji * 17-palčni barvni zaslon TFT z visoko ločljivostjo * Izračun zaporedja upogibanja * Programiranje izdelkov in prikaz v resnični velikosti * USB vmesnik - CNC krmiljene osi: Y1 - Y2 - X - R - CNC elektro-motorični zadnji opornik (os X) * na krogličnih vijakih * Hod .. 500 mm * Hitrost .. 500 mm/s * z 2 ročno nastavljivima opornikoma - CNC elektro-motorično nastavljanje višine (os R) * Hod .. 250 mm * Hitrost .. 350 mm/s - AMADA/PROMECAM prijem za zgornje orodje * vključno s sponkami z ukrivljenim zgornjim klinom * 1x ROLLERI, razdeljen komplet zgornjih orodij 60° - AMADA/PROMECAM prijem za spodnje orodje * vključno z 1x podložko matrice "C 1050-R" * 1x AMADA 1-V matrica 85° - Varnostna naprava na zadnji strani (vrata vključno z varnostnim stikalom) - BOSCH/HOERBIGER hidravlične komponente - SIEMENS električne komponente - FIESSLER AKAS laserska varnostna naprava pred strojem * 2x sprednji podporni roki s sistemom SLIDING (HIWIN ležaji) * 1x dvojni nožni upravljalnik s prosto premikanjem - CE oznaka / izjava o skladnosti Dedpfjzlulpjx Aflekr - Navodila za uporabo vključno s shemo ožičenja in hidravlično shemo

Stanje: novo, Leto izdelave: 2023, Tlak 6,2 t Dolžina upogiba 285 mm Razdalja med stojali 230 mm Vgradna višina 215 mm Izvis 70 mm Hod 100 mm Delovna hitrost 9,8 mm/s Dkedpfx Afozlulcsler Hitrost vrnitve 50 mm/s Količina olja 10 l Krmilnik DELEM DA 41T Skupna potrebna moč 0,7 kW Teža stroja približno 250 kg Dimenzije D x Š x V 900 x 1300 x 550 mm Razstavni stroj • Osnovna izvedba z okvirjem v obliki črke C • Kompaktni model za namizje • Idealno za prototipe in majhne serije • Zelo kratek čas nastavitve • Funkcionalno preprosto • Širok spekter uporabe • Nizka raven hrupa • Nizka poraba električne energije • Enostavno upravljanje vključno s posebnimi dodatki: - CNC krmilnik DELEM DA 41T

Stanje: rabljeno, HIDRAVLIČNA ČRPALKA LIEBHERR Djdpfx Afszmmwyoljkr A-6710

Stanje: rabljeno, HYDRAULIKPUMPEN REXROTH TYP: A4VSO250 LR26/10 HERGESTELLT IN DEUTSCHLAND MENGE: 3 STÜCK PREIS PRO STÜCK: 2.650 EURO AB WERK IM TOP-ZUSTAND, SOFORT VERLADEBEREIT Dsdpswxl Siofx Afljkr

Stanje: rabljeno, Leto izdelave: 1992, HYDRAP tip HPSKZ 63t / 20t Tlak: 63t Dimenzije spodnje mize: 700x700 mm Dimenzije zgornje mize: 600x600 mm Dolžina hoda: 600 mm Dksdpfx Ajw R Aamefler Svetla višina: 800 mm Blazina: 20t

Stanje: rabljeno, SCHOEN 250t TIP 6400 TLAK: 250t HOD: 420mm DIMENZIJE MIZE: 2050x1730mm VISOKONATANČNI HIDRAVLIČNI STISKALNIK Dsdpfxeq A H H Hs Aflekr

Stanje: rabljeno, MULLER 250t Dsdpfx Aorfxhkeflokr DRUCKKRAFT: 250t HUB: 550 mm TISCHABMESSUNGEN: 2500 x 1400 mm

Stanje: novo, Leto izdelave: 2024, Condition: new Year of manufacture: 2024 Stock number: 8319 Dksdpfjwiqp Isx Aflor Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €77,982 Leasing rate: €1,326.78 In stock: 1 Special price: €70,200 Press force: 200 tons Bending length: 3,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 210 mm Distance between uprights: 2,550 mm Throat depth (side frame): 250 mm Installation height: 445 mm Drive system: hydraulic Rapid traverse Y-axis: 100 mm/s Working speed Y-axis: 7 mm/s Return speed Y-axis: 73 mm/s Back gauge travel X-axis: 620 mm (with optional R-axis) Back gauge speed X-axis: 250 mm/s Table height: 858 mm Table width: 104 mm Oil tank: 150 l Motor power: 15 kW Length: 3,750 mm Width: 1,390 mm Height: 2,500 mm Weight: 8,160 kg 4 axes (Y1, Y2, X, and R axis) CNC CONTROL DT-10 - 2D graphics display 10" - Intuitive touch screen operation (easy contour drawing with finger) - User-friendly dialog programming - Automatic bending sequence calculation - Automatic calculation of the developed length for sheet cutting - Graphical product and tool library - Correction possibility - USB ports for backup and program transfer - PC software to create programs on PC and transfer via USB to the machine CNC-controlled back gauge with linear guides and ball screws CNC-CONTROLLED CROWNING SYSTEM IN TABLE Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm), segmented, entry radii hardened and ground Laser safety device Fiessler AKAS mounted on the upper beam Sheet support arms Side and rear safety guards Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model due to serial production of standardized models without compromising quality and accuracy OPTION: Crowning system motorized and adjustable via CNC control Including: CNC-controlled R-axis (adjustment range in X = 500 mm) Including: DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Sila 100 t Premer vretena 300 mm Površina mize 1070 x 260 mm Prostor med vodili 1070 mm Hitrost premika 8,0 mm/s Delovna hitrost 5,0 mm/s Hitrost vračanja 10,0 mm/s Vsebnost olja 90,0 l Moč motorja 5,5 kW Masa stroja pribl. 1500 kg Potreben prostor pribl. 2050 x 1000 x 2200 mm Oprema: - robustna elektrohidravlična stiskalnica, z fiksnim cilindrom - idealna za poravnavo osi, gredi itd., Dkodpfexabcwsx Afljr pa tudi za vstavljanje in odstranjevanje vijakov, ležajev, puš itd. - robustna jeklena varjena konstrukcija za visoke obremenitve - nastavitev višine mize preko batnice * vključno z okroglo verigo in 2 pritrdilnima vijakoma * batnica z metričnim priključkom - 1 komplet V-oblika prizmatičnih podstavkov - manometer za prikaz tlaka - enostavno nameščen ročni nadzor s: * 1x hitrostjo premika * 1x delovno hitrostjo * 1x hitrostjo vračanja - bat se lahko ustavi v katerem koli položaju - stransko fiksno nameščen hidravlični rezervoar - navodila za uporabo

Stanje: zelo dobro (rabljeno), Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 1.250 t, hod: 630 mm, širina mize: 1.270 mm, dolžina mize: 1.250 mm, skupna masa: 70.000 kg, delovna višina: 900 mm, Oprema: varnostna svetlobna zapora, Pritisna stiskalnica Dieffenbacher P0-F 1250A Pritisna stiskalnica v odličnem tehničnem stanju, ki je na voljo za prodajo iz likvidirane tovarne za preoblikovanje kovin na Poljskem. Modernizirana leta 2016. Dkedpfx Afsv E Rihjljr Nov nadzorni sistem Simatic S7 in nova električna omarica. Nameščene so tudi optične pregrade.

Stanje: zelo dobro (rabljeno), Hydraulic bookbinding press, German-made, 14 stations – rotary Dodowm Hhzjpfx Aflekr

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2018, barva: drugo, Leto izdelave: 2018, Lastna teža: 6.470 kg Djdpjym Awdsfx Aflokr Os 1: levo 10 mm, desno 10 mm Os 2: levo 10 mm, desno 10 mm Os 3: levo 10 mm, desno 10 mm