Hidravlična montažna stiskalnica za lepljenje

COMPOSER BHT 1-6200 12 siłowników

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za vstavljanje moznika z upravljalno pištolo za sočasno nanašanje lepila in vstavljanje moznika Standardni mozniki premera 8 mm Dolžina moznika: 25–80 mm Njdpfjqu N U Dox Anpslh Nazivna zmogljivost: 1 moznik na sekundo (vključno z nanašanjem lepila) Uporablja lepila PVA (vodna disperzija), viskoznost 200–400 mPa 1 kos REZERVOAR ZA LEPILO, kapaciteta 8 kg 1 kos REZERVOAR ZA VODO, kapaciteta 8 kg Maksimalni tlak: 5 bar

Stanje: dober (rabljeno), Leto izdelave: 2004, Prodajam polavtomatsko napravo za obdelavo spojev GreCon Profijoint PJ7/6100-LI. Letnik proizvodnje: 2004 Dolžina vhoda: 100–1.000 mm Širina lesa: 40–150 mm / 510 mm širina v enem ciklu Debelina lesa: 20–50 mm Avtomatska naprava za obdelavo spojev z vpihovanjem lepila na eno stran. Avtomatski obračanje materiala za drugi cikel na obrtni mizi. Avtomatski pomik v stiskalnico. Nlsdemig Tdepfx Anpeh Stiskalnica dolžine 3,00–6,10 m z avtomatskim ciklom in končno rezalno žago. Celotna površina: 10,50 x 3,50 m Stabilna in robustna konstrukcija. Odlično stanje. Na voljo takoj.

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): Nsdpfxjgwbbqe Anpslh No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: dober (rabljeno), Koda: 0370 Znamka: HAFFNER - NEMČIJA Model: DGS 187 - CE standard Dvoglava kotna žaga z nagibnima reziloma za rezanje lesa, aluminija, PVC in različnih materialov – v skladu s CE standardom Tehnični podatki: Premer rezil: 500 mm, izvrtina 30 mm Št. motorjev: 2 x 2,2 kW – 2.800 vrt/min Maksimalna dolžina reza: 3.400 mm Minimalna dolžina reza: 230 mm Nagib rezil: 45° - 90° Elektronsko nastavljanje dolžine reza na levi rezalni enoti Hidropnevmatsko pomikanje žage Pnevmatsko vpenjanje obdelovanca Kontrolna plošča z dvojnimi gumbi Elektronski programator za pozicioniranje glave Nljdsuiwqhopfx Anpsh Št. priključkov za odsesavanje: 2 x Ø 120 mm Delovni tlak: 6 bar (stisnjen zrak) Dimenzije (DxŠxV): 4.600 x 1.300 x 1.650 mm Teža: 550 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Pnevmatska stiskalnica za lepljenje lesa po debelini. TECHFA tip PTD 6000 Maksimalne dimenzije lepljenih elementov: - dolžina 6300 mm - širina 160 mm - višina 850 mm Nljdpfsyivr Hsx Anpjh Stiskalnica razdeljena na 4 sekcije.

Stanje: novo, Leto izdelave: 2024, New machine Nsdpfjw Nablex Anpslh Year of manufacture: 2024 Equipment and technical data: · Wheel diameter: 600 mm · Blade speed: 1,550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Max. blade length: 4,735 mm · Min./Max. blade width: 15 mm / 30 mm · Min./Max. blade width with special coating (optional): 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction port: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Robust German engineering · Modern, attractive, torsion-resistant double-chamber welded steel frame · Top and bottom doors secured by limit switches · Upper and lower precision bandsaw blade guides APA 2, size 2 · Finely planed grey cast iron table · Table tiltable up to 45° · Dynamically balanced bandsaw wheels with vulcanised rubber tyres · Rip fence usable on left side of blade; fence profile foldable · Blade tension indicator · 1 pc. saw blade 4735 x 25 x 0.6 mm, tooth pitch 9 mm, No. 3780.250D · Mechanical blade guard height adjustment by handwheel with locking ratchet · From 2.2 kW – rotary cam switch with direct start and emergency stop button · From 3.0 kW – rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE compliant incl. transport pallet incl. delivery to 65239 Hochheim Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas - Infinitely variable glue quantity control via operator software - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text Njdpfx Asxwaz Hjnpolh OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K...

Stanje: rabljeno, Leto izdelave: 2008, Krojač plošče Proizvajalec: Holzma Tip: HPP 350/43/38 Nodpfx Anezuy N Eepelh Letnik izdelave: 2008 Tehnični podatki - Krmilnik: CADmatic 4 - Optimizacijski program: CAD-Plan 4 - Previs rezilne plošče: 80 mm - Hitrost premikanja vodila rezilne plošče naprej/nazaj: 1–150 m/min / 150 m/min - Hitrost premikanja programa naprej/nazaj: 90 m/min / 90 m/min - Glavni motor rezilne plošče: 13,5 kW - Motor predrezilne plošče: 2,2 kW - Višina delovne površine: 920 mm - Glavna rezilna plošča: 350 x 4,4 x 60 mm - Predrezilna plošča: 180 x 4,4–5,4 x 45 mm - Dolžina reza: 4300 mm - Širina reza: 3700 mm - Tiskalnik etiket Pica 108 - Paket za obdelavo plošč iz mavca - Letno vzdrževanje in pregled s strani podjetja Homag - Nov računalnik v letu 2021 (Win10) in posodobljena programska oprema za nadzor stroja ter CadLink Opomba: Tehnični podatki in opisi so kopije potrdila naročila iz tistega časa. Podatki so namenjeni samo za informativne namene in niso zavezujoči.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Dozirni in nanesni sistem Hydrotop 1 E400R + Ecotac_C za enostransko nanašanje 1K PUR lepila na grebenske spoje za paketni klinasti spojni stroj. Nanos lepila na klinaste spoje. Nanos lepila za klinaste spoje. Zelo dobro stanje, preizkušeno delovanje. Nlsdpfx Aneul Shnepeh

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Fully automatic finger jointing line: Type Doppel-Pack Machine is disassembled Machine will be inspected with operational guarantee Specification: Wood infeed length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood outfeed length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger joint type: vertical and horizontal Adhesive type: PVAC white glue, double-sided glue application Electrical supply: Connection voltage: 400 V Control voltage: 24 V 50 Hz Nlsdpfsncd Utox Anpoh System fully wired up to the control cabinet. Finger length / possible wood cross-section and glue type can be customised. Performance: 6 milling tables / min Working height: 960 mm Table width: 600 mm Glue application: double-sided With endless package feed Technical parameters: Input material: Input length of parts (min. - max.): 150 - 1000 mm Part width (min. - max.): 40 - 155 mm Part thickness (min. - max.): 20 - 80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided (on both sides of the part)