Stapler Center Fritz Gmbh Tpw 30 Al-As nakup rabljenega (96.078)

Stanje: rabljeno, prevoženi kilometri: 23.926 km, moč: 96 kW (130,52 KM), prva registracija: 09/2017, vrsta goriva: dizel, lastna masa: 2.090 kg, največja dovoljena obremenitev: 1.410 kg, skupna masa: 3.500 kg, medosna razdalja: 4.332 mm, gorivo: dizel, Izpusti CO₂: 204 g/km, poraba goriva (mestna vožnja): 9 l/100 km, poraba goriva (izven mesta): 7,2 l/100 km, poraba goriva (kombinirana): 7,9 l/100 km, barva: rumena, voznikova kabina: drugo, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 6.198 mm, dolžina tovornega prostora: 3.770 mm, širina tovornega prostora: 1.770 mm, višina nakladalnega prostora: 1.890 mm, Leto izdelave: 2017, gradbena višina: 2.480 mm, Oprema: ABS, airbag, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, računalnik na krovu, sistem za imobilizacijo, Special equipment: Passenger airbag, on-board computer, rear wing doors (opening angle 270 degrees), full wheel covers, load/passenger compartment lining: high-quality wood Additional features: Overhead storage shelf, driver's airbag, electrically adjustable and heated exterior mirrors, outside temperature display, side marker lights, brake assist, tachometer, electronic brake-force distribution, driver assistance system: lane change warning system, 185 A alternator, interior filter: pollen filter, body/construction: high-roof van, fuel tank: 105 liters, partition wall in the cargo area, height-adjustable steering column (steering wheel), model update, engine 2.3 l – 96 kW dCi diesel CAT, wheelbase 4332 mm, smoker’s package, low emissions according to Euro 6 emissions standard, shift point indicator, sliding door right side in load/passenger compartment, front mud flaps, side protection moldings, seat cover/upholstery: fabric, seats in cab: seats in cab: driver's seat height-adjustable, lashing eyes in load compartment floor, thermal insulating glazing, permitted gross weight 3.50 t Hedpfx Agow Dhz Dexel Equipment was determined via VIN inquiry; technical errors may occur in this process. CoC available. Equipment: - Truck registration (N1 classification) - Wooden floor - Partition wall - Workshop equipment Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Stanje: rabljeno, prevoženi kilometri: 17.279 km, moč: 96 kW (130,52 KM), prva registracija: 11/2017, vrsta goriva: dizel, lastna masa: 2.090 kg, največja dovoljena obremenitev: 1.410 kg, skupna masa: 3.500 kg, medosna razdalja: 4.332 mm, naslednji pregled (TÜV): 06/2026, gorivo: dizel, Izpusti CO₂: 204 g/km, poraba goriva (mestna vožnja): 9 l/100 km, poraba goriva (izven mesta): 7,2 l/100 km, poraba goriva (kombinirana): 7,9 l/100 km, barva: bela, voznikova kabina: drugo, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 6.198 mm, dolžina tovornega prostora: 3.770 mm, širina tovornega prostora: 1.770 mm, višina nakladalnega prostora: 1.890 mm, Leto izdelave: 2017, gradbena višina: 2.480 mm, Oprema: ABS, airbag, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, računalnik na krovu, sistem za imobilizacijo, Special equipment: Passenger airbag, on-board computer, rear wing doors (opening angle 270 degrees), Hsdpsw Rg Egefx Agxol full wheel covers, load/passenger compartment lining: high-quality wood Additional features: Overhead storage shelf, driver's airbag, electrically adjustable and heated exterior mirrors, outside temperature display, side marker lights, brake assist, tachometer, electronic brake-force distribution, driver assistance system: lane change warning system, 185 A alternator, interior filter: pollen filter, body/construction: high-roof van, fuel tank: 105 liters, partition wall in the cargo area, height-adjustable steering column (steering wheel), model update, engine 2.3 l – 96 kW dCi diesel CAT, wheelbase 4332 mm, smoker’s package, low emissions according to Euro 6 emissions standard, shift point indicator, sliding door right side in load/passenger compartment, front mud flaps, side protection moldings, seat cover/upholstery: fabric, seats in cab: seats in cab: driver's seat height-adjustable, lashing eyes in load compartment floor, thermal insulating glazing, permitted gross weight 3.50 t Equipment was determined via VIN inquiry; technical errors may occur in this process. CoC available. Equipment: - Truck registration (N1 classification) - Wooden floor - Partition wall - Workshop equipment Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, širina tovornega prostora: 3.000 mm, dolžina tovornega prostora: 6.000 mm, višina nakladalnega prostora: 2.600 mm, Oprema: osvetlitev, Container shown in the picture are in stock and immediately available. Viewing and collection possible. In this offer, we present Villex Big Cube Vertical Nero 1.0 containers, which can be used as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, residential containers, or construction site containers. Dimensions: 6 x 3.0 x 2.60 m Delivery: nationwide possible Standard features: Condition: New & Assembled Exterior color: Anthracite + Black (as shown in the photos) Exterior walls: 50 mm thick Area: 18 m² Weight: 1300 kg 1x door (glass) --> Aluminium, RAL9005, double-glazed Hsdpfx Agey Hidloxel 2x floor-to-ceiling windows (1000 x 2000 mm) -> Aluminium, RAL9005, double-glazed Electrical fittings: 3x double sockets, circuit breaker + safety fuse Delivery is usually made with our own vehicles. Payment is possible in cash upon delivery to our driver or conveniently in advance via PayPal or bank transfer. The delivery time for standard containers in stock is approximately 1-2 weeks after receipt of order, depending on the postal code area. We manufacture and deliver custom containers within 1-4 weeks.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, vakuum na sesalni strani (maks.): 2.400 mbar, sesalna zmogljivost: 6.000 m³/h, premer sesalne cevi: 300 mm, filtrirna površina: 30 m², skupna višina: 2.350 mm, skupna dolžina: 3.000 mm, skupna širina: 1.100 mm, skupna masa: 900 kg, Odvod prahu, odvod žagovine, samoočiščevalni pnevmatski podtlak Alko Mobil Power JET 300 Filter se med delovanjem pnevmatsko čisti z impulzi stisnjenega zraka, kar zagotavlja visoko učinkovitost naprave. Ventilator je postavljen na čisti strani, kar minimalizira tveganje eksplozije. Idealno za širokopasovne brusilke in vse vrste suhega prahu pri različnih tehnoloških procesih. Ventilator z močjo 7,5 kW Zmogljivost: 6000 m³/h Podtlak: 2400 Pa Premer nastavka: 300 mm Hsdpfsy A Iwcjx Agxsl Povratek zraka Skladiščna številka: 1130

Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: Hodpfx Ajng Exajgxjl The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production. The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending. This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle. The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine. POSSIBLE APPLICATION AREAS: • Hydraulic piping installation • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototype manufacturing Technical Data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bend radii: 1.5 x Ø (standard 2 x Ø) • Multi-functional machine controller, bending angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bend result • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-based tool monitoring for monitoring clamping pressure • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Test production welcome at our in-house demo room • Consultation and information session on your premises • Leasing/financing support and processing through JUTEC • Trade-in of your existing machine • Service contracts, maintenance on site

Stanje: novo, Leto izdelave: 2025, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. Hodpfxsnfvx Ne Agxsl POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Leto izdelave: 2015, obratovalne ure: 780 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: sn:CAI858663, ALUP Sonetto 15 500 Vijačni kompresor na prodaj – zanesljiva industrijska enota - SKUPNI DELOVNI ČAS: 780 UR!!! Na prodaj: vijačni kompresor ALUP Sonetto 15 500 v dobrem delujočem stanju, primeren za neprekinjeno industrijsko uporabo. Glavne tehnične specifikacije: Moč: 15 kW Rezervoar za zrak: 500 litrov Delovni tlak: 8–10 bar Dovod zraka: pribl. 1,8–2,4 m³/min Tip: vijačni kompresor na rezervoarju Hlajenje: zračno hlajen Krmiljenje: integriran elektronski krmilnik Stanje: Obratovalne ure: 780 ur Redno vzdrževan/servisiran Stanje olja in filtrov: zamenjano pri zadnjem servisu Trenutno delujoč / možno preizkusiti Ta kompresor ponuja zanesljivo in stabilno delovanje; idealen za delavnice, industrijske aplikacije in avtomobilske servise. Dodatne informacije: Lokacija: Győr / Madžarska Po dogovoru lahko uredim transport/dostavo Cena: 7.700 EUR (po dogovoru) Za dodatne informacije me kontaktirajte po telefonu ali sporočilu. Hodpfx Aoyzhmbsgxjl

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Modell 5003, nosilnost na konzolno roko: 1.500 kg, višina police: 3.585 mm, skupna dolžina: 6.200 mm, skupna širina: 1.520 mm, skupna višina: 3.985 mm, število vrst polic: 8, Konzolni regal, izvlečni, proizvajalec Lützenkirchen Hjdpfx Ajyzn S Regxjl

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, širina tovornega prostora: 2.400 mm, dolžina tovornega prostora: 6.000 mm, višina nakladalnega prostora: 2.600 mm, Oprema: osvetlitev, The container shown in the image is in stock and available immediately. Inspection and pickup are possible. In this offer, we provide you with the Villex Standard Cube Vertical Nero 1.0 containers, which can be used as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, accommodation containers, or construction site containers. Dimensions: 6 x 2.4 x 2.6 m Delivery: Available nationwide Standard features: Condition: New & Assembled Exterior color: Anthracite + Black (as shown in the pictures) External walls: 50 mm thick Floor area: 14.4 m² Weight: 1,000 kg 1x Glass door → Aluminum, RAL9005, double-glazed 2x Floor-to-ceiling windows → Aluminum, RAL9005, double-glazed Hedpfjy E Ez Rsx Agxjl Electrics: 3x Power sockets, circuit breakers + fuse Delivery is usually carried out by our own vehicles. Payment can be made in cash upon delivery to our driver or conveniently in advance by PayPal or bank transfer. The nationwide delivery time for standard containers in stock is approx. 1-2 weeks after receipt of the order, depending on the zip code area. We manufacture and deliver custom-made containers within 1-4 weeks.

Stanje: rabljeno, Guideway and Surface Grinding Machine WMW FRITZ HECKERT Aschersleben Model: SZ 1000 x 1250 x 3000 / 344 Serial No.: 13.2236.2 Year of manufacture: 1989 Nominal grinding range: 3000 x 1250 mm Table clamping surface: 3240 x 1000 mm Maximum grinding length: 3300 mm Machining width: 1250 mm Machining height: 1250 mm Grinding wheel diameter (surface grinding support): max. 600 mm Grinding wheel width (surface grinding support): max. 100 mm Grinding wheel diameter (swivel support): max. 450 mm Electrical connection: 400 Volt, 50 Hz - Swivelling grinding support, drive power 16.5 kW, stepless speed control - Grinding support for surface grinding, drive power 15 kW, stepless speed control - new electrical control system based on SIEMENS S7, installed in 2001 - new electrical control cabinet, separate, year 2001 - Stepless grinding wheel speed adjustment on both grinding supports - Swivelling grinding spindle head for guideway and profile grinding - Swivelling and height-adjustable control panel - Coolant system, freestanding - Hydraulic system, freestanding - Oil circulation lubrication, freestanding Hodpfehv A A Dox Agxel - Various grinding wheels and mountings included Total required space (L x W x H): 11900 x 7700 x 4600 mm Weight: 45 tons In very good condition

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 235,36 kW (320,00 KM), vrsta goriva: dizel, gorivo: dizel, Oprema: airbag, dodatne luči, električno upravljanje oken, spojka prikolice, zapora diferenciala, TLF 3000 All-Wheel Drive on Off-Road Capable MAN TGM 13.320 4x4 Chassis Now with increased engine power! Ideally suited for small and medium-sized fire brigades in rural areas looking for a compact and robust vehicle capable of handling a wide range of tasks while requiring a large water capacity. Chassis: MAN TGM 13.320 4x4 EURO 6 with 320 HP (235 kW) and automated transmission single tires with matching track width for superior off-road capability Cab: standard crew cab (1:5) in RAL 3000 (fire red) air conditioning and auxiliary heating standard equipment with 4 SCBA holders in the crew compartment Body: high-quality frame construction using rust- and corrosion-free materials fold-out steps for each side compartment custom-made stainless steel equipment racks as per your requirements walkable, anti-slip vehicle roof Pump/Extinguishing Agent Tank: maintenance-free combined normal/high-pressure pump FPN 2000-10 PUMP & ROLL capability Capacity: 2,000 l/min at 10 bar and 400 l/min at 40 bar integrated infinitely adjustable foam proportioner water tank (4,000 l) with integrated foam agent tank (400 l) auxiliary heating in the pump compartment Firefighting Equipment: Hjdpfey Hqlkox Agxjl high-pressure rapid intervention line with 50 m rigid hose foam/water monitor 2,000 l/min mounted on the vehicle roof self-protection system with 4 extinguishing nozzles in front of the wheels Safety and Lighting: LED lightbar on the vehicle roof / 2 LED front flashers pneumatic special signaling system Martin horn 100 W loudspeaker system with PA unit reversing camera comprehensive LED lighting in crew and equipment compartments LED scene lighting on the body and additional spotlights pneumatic LED light mast with remote control hygiene board optionally available We will gladly provide you with a detailed offer and demonstrate the vehicle at our Berlin location. All information provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement constitutes information only and does not represent a binding offer. Subject to prior sale!

Stanje: delavnici obnovljeno (rabljeno), Technical data Feeder bunker with hydraulic moving floor and bag opener for recyclables from yellow bags, commercial waste, and residual waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Bunker volume: 30 m³ Drive power: 17.5 kW Hodjyizxrspfx Agxjl Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the machine: The feeder bunker with bag opener was in operation at a large recycling facility, where recyclables from yellow bags or commercial waste were tipped into the bunker using wheel loaders, bags were opened via the bag opener, and materials were discharged dosed either to a sorting plant or for further processing. The system functioned flawlessly until disassembly and was replaced by a larger machine with higher throughput. The machine was dismantled in our workshop into individual components, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and/or the following spare parts were renewed: – Disassembly of the feeder bunker and bag opener into individual parts. Cleaning, partial sandblasting, priming, and painting of steel components. – Various wear and cover plates were newly manufactured and installed. – Cutting off worn ends (approx. 40 cbm) of the moving floor tubes. Welding new tubes and smoothing the moving floor tubes. – Replacement of all sliding plastic plates for the hydraulic moving floor. – Removal of the hydraulic unit from the moving floor, complete drainage of the hydraulic oil tank, replacement of oil filters, refilling with new hydraulic oil. – Replacement of all three hydraulic manifolds, all valves, oil sight glass, and all hydraulic hoses on the hydraulic power unit. – All three hydraulic cylinders of the moving floor: seals and hydraulic hoses replaced. – All six end switches (proximity sensors) of the moving floor were replaced. – Conveyor chains left and right of the scraper conveyor replaced. – Seven scraper bars of the scraper conveyor replaced. – Drive motor for the bag opener rotors replaced. – All nine pneumatic cylinders for the pressure pipes replaced. All pneumatic lines and fittings renewed. – All sliding plastic plates for the hydraulic adjustment of the bag opener renewed. The bag opener can be moved in depth to allow the system to be used for commercial or residual waste without the bag opener if required. – Side impact protection plates on both sides renewed. – Various wear parts of the bag opener replaced. – The entire system was completely rewired and reconnected electrically. – The system control in the control cabinet was reverted by BRT Hartner to standalone single unit operation and the standard program was reloaded. – The system was commissioned and tested by BRT Hartner; see the function video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We accept no liability for the technical specifications or possible errors.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2200392094, skupna širina: 680 mm, skupna dolžina: 1.400 mm, skupna višina: 1.270 mm, skupna masa: 220 kg, hladilna zmogljivost: 8 kW (10,88 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Oprema: hladilna enota, Naprodaj je skoraj nov ICS hladilni agregat / chiller. Naprava je bila v naši uporabi le približno 20 ur za testiranje in je v praktično novem stanju. Na voljo je vsa dokumentacija, elektro sheme ipd. Agregat je trenutno v našem skladišču v 93476 Blaibach. Po dogovoru lahko uredimo prevoz s špediterjem, nakladanje z viličarjem pa ni težava. Priložena je fotografija identifikacijske ploščice, upam da odgovarja na vsa vprašanja, za dodatne informacije pa, prosimo, pišite. Hjdpfsyzq Nxex Agxjl

Stanje: rabljeno, prevoženi kilometri: 26.044 km, moč: 174 kW (236,57 KM), prva registracija: 03/2024, vrsta goriva: dizel, lastna masa: 2.525 kg, največja dovoljena obremenitev: 675 kg, skupna masa: 3.200 kg, gorivo: dizel, barva: siv, vrsta prenosa: samodejen, vzmetenje: drugo, število sedežev: 4, skupna dolžina: 5.140 mm, število postelj: 4, Oprema: ABS, airbag, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, nadzor oprijema, parkirni grelec, pogon na vsa štiri kolesa, računalnik na krovu, spojka prikolice, tempomat, Lifting/tilting roof window, sun awning, driver's cab air conditioning, pilot seats, swiveling, blower heater, living area air conditioning, Mercedes chassis, rear double bed, pop-up roof double bed, touchscreen, lumbar support, 4 belted seats, clock & tachometer, brake pad wear indicator, auto-dimming exterior mirrors, 360-degree camera, thermal insulation glazing, metallic paint, 4 doors, second owner, Euro6d_Temp, green environmental badge (4), leather, Apple CarPlay, Android Auto, tinted windows (privacy glazing), spare wheel, glare-free high beam, distance warning system, reversing camera, black, front side airbags, passenger airbag, front window/head airbags, right sliding door, navigation with color monitor, color monitor for navigation system, leather steering wheel, gearshift paddles, front parking sensors, rear parking sensors, parking camera, digital radio, electrically folding exterior mirrors, dual electric windows, seat heating, heated front seats, multifunction steering wheel, radio/MP3, outside temperature display, colored glazing, heated exterior mirrors, auto-dimming interior mirror, power steering, non-smoking vehicle, electric exterior mirrors, alarm system, brake assist, adaptive cruise control, alloy wheels, removable towbar, third brake light, center armrest, German version, new MOT/emissions test, further features available, errors and interim sale excepted, trade-in possible, financing available, please contact us for a tailored offer. Panamerica grille, 19-inch alloy wheels with 245/45R19 all-season tires, BA3 Active Brake Assist, BH1 HOLD function, C70 pedestrian protection, CA1 AGILITY CONTROL suspension, CL1 height and tilt adjustable steering wheel, CL3 leather steering wheel, CL4 multifunction steering wheel with trip computer, CU4 aerodynamics package, D27 electric glass sliding/tilting roof, E07 hill start assist, E1D digital radio (DAB), E1E navigation, E1F 26 cm (10.25'') display, E1T touchpad, E28 additional battery for retrofit consumers, E4S smartphone integration package. Hsdpfsy Hmkvex Agxsl

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, designed to optimally support companies with the highest quality standards. Thanks to its high-quality construction and wide range of applications, it offers intuitive operation that efficiently and reliably optimises your tube filling processes. The powerful drives and user-friendly colour touchscreen control system enable maximum flexibility when changing formats and products, significantly simplifying tube filling. The machine features memory slots for quick and reproducible adjustment of all relevant machine parameters. If you want to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling Range ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Hjdpfxoyq Hgks Agxsl Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1% Output: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, S&F Vibrating Screen Machine | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Hodpfxey Aa Ugj Agxsl Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screen area: 2.0 m² per mesh size Screen decks: 1 piece Mesh aperture size: - 1st screen deck: punched perforated plate, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine color: RAL 3000 Flame Red including: Modular Silo Type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Article No.: 406.4345 including extension feet L = 1,100 mm including hopper extension and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and wood shavings - Biomass - Wood pellets - Charcoal - Waste wood - Bark vibrating screen | wood chip screen | vibrating screening machine | flat screen | oscillating screen | drum screen | screening machine for wood chips | CHP screening machine

Stanje: novo, Leto izdelave: 2025, Two tables are connected in tandem operation for a combined load capacity of 5000 kg. Technical description with the following main data: Capacity: 3000 kg static distributed load Lift stroke: 800 mm Closed height: 240 mm Total height: 1040 mm Platform length: 1300 mm Platform width: 1000 mm Material: smooth sheet steel Lifting time: approx. 18 sec for full lift stroke Lowering time: dependent on load Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 meter cable Motor: 2.2 kW, 1,400 rpm Solenoid voltage: 24 V DC Protection class: IP 54 overall, solenoid valve and switch IP 65 Paint finish: Steel blue RAL 5011 Power unit: integrated in the lift table Control box: deadman control incl. 2 m cable Total weight: approx. 330 kg Tandem control for synchronized movement. Note: 100% synchronization cannot be guaranteed. Any height differences that occur will be compensated in the base or upper position! The safety edge strips of the two lift tables are NOT interconnected. Hsdok E Hmtjpfx Agxsl Minimum distance of 500 mm between the lift tables. Maximum distance of 3000 mm between the lift tables. Self-supporting base frame with 4 flange wheels in which the lift table is mounted. 4 ball-bearing flange wheels, wheel Ø150/175 mm, heavy-duty version, made from turned C45 steel. Height increased by approx. 50 mm.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Lift table with integrated chain conveyor. Load capacity: 3 tons. Platform size: approx. 2500 x 1200 mm. Technical specifications: Single scissor lift table type TT3000Bsp. - Load capacity: 3,000 kg - Effective lift: 1,600 mm - Closed height: 350 mm - Platform size: approx. 3,200 x 1,200 mm - Drive: hydraulic power unit with 2.2 kW motor - Control: up/down via manual hand switch Chain conveyor with 3 conveyor chains mounted on the lift table. - Length: approx. 3,200 mm - Distance between outer chains: 1,100 mm - Drive: SEW gear motor, 1.1 kW - Drive installed underneath the lift platform - Conveyor chains: 3 x 1½" roller chains, German quality - Conveyor speed: approx. 7 m/min - Robust cover plates between the conveyor chains, walkable, closed design Hedpefhbupjfx Agxel - Manual electrical control via hand-held deadman's switch, with forward/reverse function - Installation height: approx. 300 mm Subframe with adjustable feet allowing forklift access underneath with forks. Total installation height: approx. 750 mm (1 unit = lift table + chain conveyor + base frame)

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts or, for example, nameplates. Thanks to its compact design, the system is highly practical and can be used anywhere. The device is very easy to operate without any programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, without the need for extensive programming expertise. Serial and article numbers can be automatically incremented by the software after a simple initial setup. Furthermore, the software can import data (variable information such as drawing numbers, project names, etc.) directly from existing tables and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 20 Watt (optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking area size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm Hjdpjw Et Ilofx Agxol - Grid holes for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-pinch protection - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Power supply 230V - Air cooled - Laptop with Windows operating system (German or English) - Dimensions: W x D x H 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and article numbers once configured. In addition, the software is capable of reading data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transferring them into predefined sections. The use of a handheld scanner is also possible. The standard equipment includes a laptop with mount and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as lateral extensions for marking long workpieces, are available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – system for automatic determination of focus distance • Signal lamp to indicate operating status • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. workpiece height approx. 270mm • Electrically adjustable Z-axis (work surface adjustment) Hsdpfx Agov Sybyjxsl • Frame made of aluminum profile • Connection 230V • Air cooled • Laptop with Windows OS • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg

Stanje: rabljeno, We are offering used grating panels for sale. TECHNICAL DATA Dimensions: 1,110 x 975 x 30 mm Mesh size: 30 x 30 mm Surface: galvanized Condition: used Hjdpfey H Hfgjx Agxel PRICE €162.00 net per unit (10 pieces) €192.78 gross incl. VAT Available quantity: 89 pieces YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipping is available for an additional charge. The additional costs depend on the delivery location and shipment size; please contact us for an individual quote. PROJECT PLANNING Our sales team will gladly provide you with a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. TERMS OF PAYMENT Terms of payment are to be agreed upon at the time of order. The stated price refers to the unit price/net price or as specified in the description text (plus VAT). You will of course receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry, and skilled crafts. We constantly offer attractive used equipment from various manufacturers/brands at competitive prices. Please feel free to contact us if you have any questions. Four factors for success – The pillars of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), vhodna napetost: 400 V, vhodni tok: 13 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, volumenski pretok: 5.089 m³/h, sesalna zmogljivost: 5.089 m³/h, premer sesalne cevi: 300 mm, vrsta aktuacije: električni, skupna masa: 972 kg, Ponujamo to rabljeno mobilno odsesovalno napravo AL-KO POWER UNIT 300 P, letnik 2013. Tip: POWER UNIT 300 P Serijska številka: 2433358790 Letnik: 2013 Priključni premer: 300 mm Nazivno število vrtljajev: 2.895 1/min Nazivni volumenski pretok: 5.089 m³/h Nazivni tok: 13,8 A Podtlak pri nazivnem volumnem pretoku: 2.050 Pa Zaščitni razred: IP 54 Moč motorja: 7,5 kW Teža: 972 kg Napetost/tok/frekvenca: 400/3~/50 Hz Maks. priključek za stisnjen zrak: 8,5 bar Zaščita: 25 A Številka filtra: 85101201 Kategorija filtra: Kat. M samodejno upravljanje loput Za dodatna vprašanja ali več informacij nam pišite ali nas pokličite. Hedpfsy Akfpjx Agxel

Stanje: dober (rabljeno), številka stroja/vozila: WMA22XZZ5LP139777, prevoženi kilometri: 293.074 km, moč: 346 kW (470,43 KM), vrsta goriva: dizel, velikost pnevmatike: 315/80R22.5, konfiguracija osi: 4x4, medosna razdalja: 3.900 mm, gorivo: dizel, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, Leto izdelave: 2019, Oprema: ABS, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, zapora diferenciala, Tehnične informacije Prostornina motorja: 12.419 cc Dovoljena skupna masa: 8.440 kg Pogon Znamka motorja: MAN Konfiguracija osi Dimenzija pnevmatik: 315/80R22.5 Sprednja os: vzmetenje: listnato vzmetenje Zadnja os: vzmetenje: zračno vzmetenje Notranjost Pozicija volana: Levo Stanje Tehnično stanje: dobro Vizualno stanje: dobro Dodatne informacije Zunanje mere: 6,442x2,55x4 Država proizvodnje: DE Sklopni pritisk: 10.839 kg Obremenitev osi: 12.000 kg Dodatne informacije Za več informacij kontaktirajte Jeroen Heindryckx, Bart Apers ali Matthias Eyckmans. Hjdeyunnwepfx Agxol = Dodatne možnosti in oprema = - Izpušna zavora - Pogonska stran - Ogrevana ogledala - CB-radijski sistem - Diferencialna zapora - Voznikov sedež s pnevmatskim vzmetenjem - Mehansko vzmetenje kabine - Nastavljiv volan

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 375,1 kW (509,99 KM), konfiguracija osi: 4x4, gorivo: dizel, emisijski razred: Euro 6, Leto izdelave: 2025, Oprema: airbag, dodatne luči, parkirni grelec, spojka prikolice, From our range of new vehicles, we offer you: TLF 3000 All-wheel drive on an off-road MAN TGM 13.290 all-wheel chassis Ideally suited for small and medium-sized fire departments in rural areas, seeking a compact and robust vehicle to handle diverse tasks while requiring a large water reserve. Chassis: • MAN TGM 13.290 4x4 EURO 6 with 290 HP (213 kW) and automated transmission • Single tires with same track width for maximum off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater Hodpfx Agexyunasxol • 4 standard breathing apparatus holders in crew compartment Body: • Premium frame construction made of stainless, corrosion-resistant materials • Folding steps for each side equipment compartment • Custom stainless steel equipment mounts configured to your requirements • Walkable, anti-slip vehicle roof Vehicle pump/extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump FPN 2000-10 • PUMP&ROLL capable • Output: 2,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, continuously adjustable foam proportioning system • 4,000 l water tank with integrated 400 l foam agent tank • Additional heating system in the pump compartment Firefighting equipment: • High-pressure rapid intervention system with 50 m rigid hose • Foam/water monitor with 2,000 l/min output mounted on roof • Self-protection system with 4 extinguishing nozzles in front of wheels Safety and lighting: • LED roof bar / 2 LED front flashers • Pneumatic Martin-Horn special signalling system • 100 W PA system with loudspeaker unit • Rear-view camera • Comprehensive LED lighting in crew and all equipment compartments • LED perimeter lighting on body and additional spotlights • Pneumatic LED lighting mast with remote control • Hygiene station on request We would be pleased to provide you with a detailed quotation and present the vehicle to you at our facility in Berlin. All details to the best of our knowledge and belief, without guarantee for completeness or accuracy. This listing does not constitute an offer but is for informational purposes only. Subject to prior sale!

Stanje: novo, Leto izdelave: 2022, approx. 14 linear meters, H: 350 cm, Shelf load: 3000 kg, pallet racks, heavy-duty racks, high-bay racking, industrial shelving, racks immediately available from stock Specifications: - Height: approx. 350 cm - Depth: approx. 110 cm - Length: approx. 14 linear meters - Load capacity: 3000 kg per shelf level - Uprights galvanized - Beams 270 x 14 x 5 cm, T30 - Beams in orange - New BLT / PR35 products - Manufactured in Europe & certified according to the current DIN EN 15512 standard - 100% quality at the best price Racking system includes: - 06 x uprights approx. 350 cm x 110 cm, disassembled - 20 x beams approx. 270 x 14 x 5 cm, T30 - 40 x locking pins - Levels: floor + 2 - 45 pallet spaces including floor positions --IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES-- Price: €1,460.00 net plus applicable statutory VAT You will receive an invoice with VAT shown separately. Frame pre-assembly is available upon request at a small additional charge of €12.50/net per unit. Transport: Delivery can be arranged by our partner forwarding company upon request; costs are dependent on postal code. Hsdpey Himaefx Agxel Assembly: Our trained staff are happy to assist you with the professional assembly and disassembly of your facility if required. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects—from planning and ordering through to assembly.