Renders Roc 12.18 Na - Bpw Disc - Tuv/Apk 28-05-2026. nakup rabljenega (61.459)

Stanje: rabljeno, prevoženi kilometri: 21.000 km, moč: 58 kW (78,86 KM), prva registracija: 11/1989, skupna masa: 3.500 kg, vrsta goriva: dizel, barva: rdeča, naslednji pregled (TÜV): 03/2028, vrsta prenosa: mehanski, širina tovornega prostora: 1.730 mm, dolžina tovornega prostora: 3.250 mm, višina nakladalnega prostora: 1.830 mm, Leto izdelave: 1989, skupna dolžina: 5.350 mm, skupna širina: 1.975 mm, skupna višina: 2.700 mm, število sedežev: 2, 1st hand – German voluntary fire brigade. TÜV valid until 03/2028. A classic vehicle inspection (according to §23 StVZO in conjunction with §21 StVZO as “Oldtimer special vehicle fire engine equipment carrier” [for H registration]) was carried out by TÜV Rheinland on 09.03.2026. Engine oil with filter / brake fluid / 4x glow plugs / wiper blades – all COMPLETELY NEW and replaced in a specialized workshop in 02/2026 with invoice. Direct from the garage, most recently with its first owner, including the original registration documents and even the first vehicle registration certificate from 1989. Always registered. Only 21,000 total kilometers driven. Very sound Bremer Transporter T1, medium wheelbase version with the robust factory all-steel high roof. Body condition in detail: Only 2 minor rust spots (right rear wheel arch and left side wall). Nothing else, not even at the “typical Bremer rust zones”; on this example, these points are all “clean” and have never been repaired. Only the right front wheel arch was previously repaired. Normal signs of use exist. Undercarriage is also in good condition. This 308 D was sold to us by the original owner/community as “accident free”. As-new winter tyres (DOT 2022). Tall 270-degree rear doors, fog lamps, rear axle stabilizer, and reinforced shock absorbers. Otherwise, absolute base version. No seat belts. No power steering. No ABS. Pure 1980s – back then they really built durable, reliable vehicles. There is little here that can go wrong. Engine: OM 601, 4-cylinder naturally aspirated diesel, 79 hp. 5-speed manual transmission. 127 km/h listed as maximum speed. When opening the sliding door, a large mechanical entry step extends. The vehicle was used by the fire brigade as an equipment transporter and is fitted with shelving, which can be easily removed if required. Conversion manufacturer: Hermann Schmitz KG in 5901 Wilnsdorf near Siegen. Registered as "Other special vehicle, fire engine". Unladen weight 2,320 kg (with all equipment included). Permissible gross weight – unchanged from factory to today – 3,500 kg. This means the 308 D-KA can be driven immediately with a modern passenger car driving licence. The special signal system (emergency light/siren) was dismantled by the fire brigade before sale and is no longer present. Cjdpfjw Tpfujx Aqtjhb The vehicle runs very well, and transfer on the motorway was pure pleasure. This offer is only valid for businesses or government entities. Subject to prior sale and errors. The purchase price is final, gross = net (differential taxation in accordance with §25a UStG as it is a government vehicle). Therefore, 19% VAT does not apply. VAT cannot be separated from the purchase price.

Stanje: rabljeno, prevoženi kilometri: 29.800 km, moč: 115 kW (156,36 KM), vrsta goriva: bencin, vrsta prenosa: mehanski, prva registracija: 07/1981, naslednji pregled (TÜV): 09/2027, barva: rdeča, število sedežev: 2, Oprema: pogon na vsa štiri kolesa, Original early second-hand fire department G-Class, which has never been used for civil purposes to date. TÜV and historic registration certificate (according to §23 StVZO) passed in September 2025. General inspection (HU) valid until 09/2027 ("no defects found" undertaken by DEKRA). Year of manufacture: 1981 / First registration: 07-1981. Original mileage is only 29,800 km. Used solely by the fire brigade up to now. Advance Rescue Vehicle (VRW) with ZIEGLER bodywork and Knurz-Kirsch generator with 5 kVA output. Codoxthdzspfx Aqtohb German garage vehicle, continuously registered with the original registration document (only 2 previous owners) until autumn 2025. The original documents still list the manufacturer as GFG "Geländefahrzeug-Gesellschaft," which was a joint venture between Daimler-Benz and Steyr-Daimler-Puch in Austria at the time. This is one of the last vehicles to bear this manufacturer’s name in the papers; shortly after, "Daimler-Benz" became the officially listed manufacturer in the registration documents. In 1991, a complete MATTER roll bar was installed in the vehicle (duly documented in the registration papers). Comes with a small roof rack system for transporting long equipment. The long-wheelbase 280 GE is the largest and most powerful model from the first G-Class production series that could be ordered ex-factory as a Mercedes G-Class during the early years. The straight-six petrol engine M110 with 2717 cc and 115 kW/156 hp starts and runs well. 4-speed manual gearbox with differential locks. Power steering. 155 km/h registered as top speed. A power take-off for operating the generator is also present. The vehicle was last used mainly to transport a portable fire pump (TS) with suction hoses and accessories. Therefore, there are no rear seats, providing a load area similar to that of a truck. No additional seats beyond the two front seats remain. According to original papers, it is classified as a “3-seater” and the registration type is “Other vehicle: fire brigade advance rescue vehicle (VRW).” Empty weight: 2360 kg. Gross vehicle weight (originally 2900 kg) was upgraded in 1991 to 3030 kg as per documentation. This gives the 280 GE a current payload capacity of 670 kg. Vehicle dimensions: Length 4395 mm / Width 1700 mm / Height 2150 mm. Tyres 205/80R16 in good condition. Currently fitted with winter tyres bearing the snowflake symbol as required by current legislation (DOT 2018). Although the G does not have a towbar, the necessary main traverse is installed. It is not possible to state the retrofitting/towing capacity since the corresponding fields in the original registration document are marked as “not applicable.” According to the last owner (verbal report), the Mercedes is accident-free; however, there is no written proof, so this is passed on strictly as an oral history to the buyer. The 280 GE was recently driven a long distance on the motorway to us, which it completed without any issues. A new battery has just been installed. This off-road vehicle is immediately available here and ready for new assignments. This offer applies only to businesses, professionals, public authorities, emergency services, agriculture and forestry sectors, and similar self-employed persons. Sale to private end consumers is unfortunately not possible. Subject to prior sale and errors in description.

Stanje: novo, Table length 3000 mm Table width 1500 mm Table height 850 mm Side clamping surface: 200 (height) mm Weight 1517 kg SIEGMUND authorized dealer – all items available! Product Description - High-quality steel S355J2+N + plasma nitrided - Material thickness approx. 24.5 – 27 mm - Borehole Ø 28 mm - Boreholes on surface with 100x100 mm grid - Corners, edges, and holes rounded - Height of side panel 200 mm - Borehole spacing on side panel 50 mm - Includes surface scaling - Construction reinforced by ribs - Grid lines allow for precise setups Chjdpfjxaa Nvsx Aqtjb The welding tables are equipped with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion resistant / increased load capacity Features: - 28 mm hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - Incl. 6x leg base equipment

Stanje: novo, Table length 2400 mm Table width 1200 mm Table height (side plate) 200 mm Weight 981 kg Required space approx. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Chsdpfjxab Rnjx Aqtob Product description - Fully hardened tool steel X8.7 + plasma nitrided - Material thickness approx. 24.5 – 27 mm - Side rails made from high-quality steel S355J2+N + plasma nitrided - Boreholes Ø 28 mm - Borehole grid on surface 100x100 mm - Corners, edges, and bores rounded - Side rail height 200 mm - Side rail bores in diagonal grid - Includes surface scale - Structure reinforced by ribs - Grid lines enable precise setups Welding tables come standard with a scale. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion resistant / higher load capacity Features: - 28 mm hole pattern / Dimensions 2400 x 1200 x 200 mm - Plasma nitrided Extreme version with scale - Side rail with diagonal grid - incl. 4x base feet as standard

Stanje: novo, Table length 2400 mm Table width 1200 mm Table height (side face) 200 mm Weight 981 kg Space requirement approx. 2400 x 1200 mm SIEGMUND Authorized Dealer – all items available! Product Description - High-quality steel S355J2+N + plasma nitrided finish - Material thickness approx. 24.5 – 27 mm Codpoxaa Ekjfx Aqtshb - Boreholes Ø 28 mm - Borehole grid on surface: 100x100 mm - Corners, edges, and boreholes rounded - Side wall height 200 mm - Borehole spacing in side wall: 50 mm - Includes scaling on the surface - Construction reinforced by ribs - Grid lines enable precise setups The welding tables are supplied as standard with a scale. Plasma-nitrided version: - Protection against rust / scratches / adhesion of weld spatter - Corrosion-resistant / higher load capacity Features: - 28 mm hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version (750) with scale - Including 4x basic feet

Stanje: rabljeno, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 05/2006, skupna dolžina: 7.600 mm, skupna širina: 2.550 mm, vzmetenje: zrak, medosna razdalja: 6.280 mm, barva: drugo, Leto izdelave: 2006, Konfiguracija osi Cedpfx Aqjy Ulwkstjhb Znamka osi: BPW Zavore: kolutne zavore Vzmetenje: zračno vzmetenje Zadnja os 1: Največja dovoljena obremenitev: 9.000 kg Zadnja os 2: Največja dovoljena obremenitev: 9.000 kg Zadnja os 3: Največja dovoljena obremenitev: 9.000 kg Teže Lastna teža: 3.370 kg Nosilnost: 35.630 kg Dovoljena skupna masa: 39.000 kg Identifikacija Registrska številka: OS-76-KY

Stanje: novo, Table length 3000 mm Table width 1500 mm Table height (side surface) 200 mm Weight 1374 kg SIEGMUND Authorized Dealer – All items available! Product Description - Through-hardened tool steel X8.7 + plasma nitrided - Material thickness approx. 24.5 – 27 mm - Side panel made from high-quality steel S355J2+N + plasma nitrided - Hole diameter Ø 28 mm - Surface holes arranged in diagonal grid - Corners, edges, and holes rounded - Side panel height 200 mm Cjdpfx Aqoxabiwjtohb - Side panel holes in diagonal grid - Includes surface scaling - Construction reinforced by ribs - Grid lines enable precise setups The welding tables come standard with a scale. Plasma-nitrided version: - Protection against rust / scratches / adherence of weld spatter - Corrosion resistant / higher load capacity Equipment: - 28-hole system / Dimensions 3000 x 1500 x 200 mm - Extreme plasma-nitrided version with scale - With diagonal grid on the table surface - Side panel with diagonal grid - Incl. 6x standard feet

Stanje: novo, Table length: 2400 mm Table width: 1200 mm Table height (side panel): 200 mm Weight: 949 kg Required space approx. 2400 x 1200 mm SIEGMUND Authorized Dealer – all items available! Article No.: 7D.1 Product Description - Fully hardened tool steel X8.7 + plasma nitrided - Material thickness approx. 24.5 – 27 mm - Side panel made from high-quality steel S355J2+N + plasma nitrided - Bore diameter Ø 28 mm - Surface bores in diagonal grid - Corners, edges, and bores rounded - Side panel height 200 mm - Boreholes in side panel arranged in diagonal grid - Includes surface scaling - Rib-reinforced construction - Grid lines enable precise setups Cedpfx Aqsxaayzotehb The welding tables are standardly equipped with a scale. Plasma-nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Equipment: - 28 mm hole grid / dimensions 2400 x 1200 x 200 mm - plasma-nitrided "Extreme" version with scale - Side panel + tabletop with diagonal grid - incl. 4x standard feet

Stanje: novo, Table length: 2000 mm Table width: 1000 mm Table height (side surface): 200 mm Weight: 699 kg SIEGMUND Authorized Dealer – all items available! Product description - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Side cheek made of high-quality steel S355J2+N + plasma nitriding - Bore diameter Ø 28 mm - Boreholes on the surface in diagonal grid pattern - Rounded corners, edges, and boreholes - Side cheek height 200 mm - Boreholes in the side cheek in a diagonal grid pattern - Includes surface scale - Reinforced construction with ribs - Grid lines allow for precise setup The welding tables come standard with a scale. Plasma-nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / increased load-bearing capacity Cedpfsxabfrox Aqtjhb Features: - 28 mm hole pattern / dimensions: 2000 x 1000 x 200 mm - plasma-nitrided Extreme version with scale - with diagonal grid on the tabletop - side cheek with diagonal grid - incl. 4x base feet standard equipment

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, obratovalne ure: 13 h, nosilnost: 272 kg, tip droga: teleskopski, dvižna višina: 11.500 mm, dvižna moč: 272 kg/m, dolžina platforme: 1.830 mm, širina platforme: 900 mm, skupna masa: 3.400 kg, transportna dolžina: 5.340 mm, transportna širina: 2.000 mm, transportna višina: 2.000 mm, vrsta goriva: električni, velikost pnevmatike: 26×12-16.5, stanje pnevmatik: 100 odstotek, barva: modra, === MAIN SPECIFICATIONS === Year of manufacture: 2026 Operating hours: 13.8 h (delivery/test hours only) Working height: 11.15 m Platform height: 9.15 m Max. horizontal outreach: 6.76 m Platform capacity: 272 kg Max. persons: 2 Platform dimensions (L × W): 1,830 × 900 mm Platform rotation: 80° / 80° Upper structure slew: 345° Boom type: Telescopic boom Chodpfoyq Rlksx Aqtob Jib: Yes Drive: Electric Battery: 48V (220Ah) Drive configuration: 2WD Tyres: Foam-filled tyres (26×12-16.5) Machine weight: 3,400 kg CE certification: Yes === HIGHLIGHTS === New machine with only delivery and test hours Electric, emission-free drive Compact telescopic boom lift for indoor and outdoor use CE-certified and ready for immediate operation === CONDITION === New machine with only delivery and test hours (13.8 h). Fully inspected and operational. Viewing upon request. === LOCATION & DELIVERY === Location: Sittard, Netherlands Worldwide delivery available Price € 42,500 (EXW / plus VAT) Compact electric telescopic boom lift for efficient operation in warehouses, industrial facilities, and construction sites. The Dingli Nano30 offers quiet electric drive, excellent manoeuvrability, and reliable emission-free performance. All machines are fully inspected, CE-certified, and ready for immediate use. === DELIVERY === Crane loading available upon request. Flexible shipping options depending on destination and logistics requirements. Transport is professionally organised by the logistics team at Collé Rental & Sales.

Stanje: rabljeno, prevoženi kilometri: 20.000 km, moč: 353 kW (479,95 KM), prva registracija: 11/2025, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: polavtomatski, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Reference No.: #568 Mercedes Benz Arocs 2548 6x2 L with KROLL High-Pressure Jetting and Vacuum Combination ADR Type K 14.0 / 28 PE This Mercedes-Benz Arocs 2548 6x2 L is equipped with a high-quality KROLL high-pressure jetting and suction-pressure tank body, ADR class L4BH. With a telescopic DN125 boom, VacuStar 1600, Uraca KD718 G60, and full CAN-BUS control, the vehicle offers maximum performance for sewer, industrial, and hazardous goods operations. Body * KROLL Fahrzeugbau-Umwelttechnik GmbH * HOSE STORAGE CASSETTE TELESCOPIC BOOM DN 125 * Operating radius on driver’s side: 4,600 mm * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle Type K 14.0 / 28 PE * Discharge piston with 3 locking positions * (3,300l water/10,600l sludge, 5,500l water/8,200l sludge, 7,700l water/6,000l sludge) * Suction from open bodies of water possible – "comfort configuration" via cassette boom with integrated filter * Tanker equipment according to ADR - Category AT/FL L4BH * EMPTIED by pneumatically operated piston * SLUDGE WATER DRAIN DN 80: for returning dirty water to the sewer via the boom * Manhole DN500 Chassis?Mercedes Benz Arocs 2548 L * 6x2 * Automatic transmission * 480 HP / 350 kW * EURO 6e * Fuel capacity approx. 350l * Cab color MB9147 Arctic White * 2x LED beacons on cab * Rear-view camera * Navigation * Air-conditioning Vacuum System * CVS VacuStar 1600 approx. 1,550 cbm/h at 400 bar * Drive: via drive shafts, V-belts, and pneumatically engaged friction clutch from vehicle engine PTO * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE TELESCOPIC BOOM DN 125 * Reach on driver’s side: 4,600 mm * Additional suction hose reel with direct flow right rear, approx. 30m DN75 suction hose High-Pressure System Uraca KD718 G60 approx. 315 l/min at 170 bar * Drive: via drive shafts, V-belts, and pneumatically engaged friction clutch * approx. 240m HD hose DN 25 * Large HP hose reel for 240m 1" DN 25, swivels 180° * Equipped with 160m DN25 (rubber hose) * Small HP hose reel for 60m DN 13, hydraulic * Equipped with 60m DN13 (rubber hose) Special Features of Hose Storage Cassette with Telescopic DN 125 Boom * Infinitely variable height adjustment of suction hose hydraulically via roller guide carriage * Boom for suction hose is hydraulically operated, telescopic, and 180° swivelable * ADR L4BH design, type class FL, incl. EX/II, EX/III and AT * Spray gun * LED beacons * LED perimeter lighting * Work functions remotely controlled via CAN-BUS technology * Radio remote control with 14 functions * Hand washing facility (hot) * Rear-view camera * Soundproof enclosure for pump compartment * Large tool compartment * Toolbox * Holder for traffic cones * Vise * Ladder * Large advertising boards on both sides * Scrap box Technical Data GVW 26,000kg * Unladen weight approx. 18,760 kg * Length approx. 9,280 mm * Height approx. 3,820 mm * Width approx. 2,550 mm Cjdox Egyfspfx Aqtshb * Wheelbase 3,900 mm Conclusion An exceptionally well-equipped Mercedes-Benz Arocs 2548 with KROLL combination body, telescopic DN125 boom, VacuStar 1600, Uraca KD718 G60, and ADR L4BH. The ideal solution for sewer companies, industry, municipalities, and service providers seeking a powerful, ready-to-use professional vehicle. For further d

Stanje: novo, prevoženi kilometri: 500 km, moč: 350 kW (475,87 KM), vrsta goriva: dizel, skupna masa: 25.000 kg, konfiguracija osi: 3 osi, barva: oranžna, vrsta prenosa: samodejen, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #549 Mercedes Benz Arocs 2848 6x2 with combined high-pressure jetting and suction/pressure tank body, ADR type K 14.0 / 28 PE This Mercedes-Benz Arocs 2848 6x2, fitted with a combined KROLL high-pressure jetting and suction/pressure tank body, is a NEW vehicle equipped with ADR L4BH, VacuStar 1600, Uraca KD 718, telescopic boom DN125, and hose storage cassette. A premium vehicle, ready for immediate operation, designed for demanding sewer, industrial, and hazardous goods applications. Body - Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH - Hose storage cassette with telescopic boom DN 125 - Outreach on operational side: 5,200 mm - Tank material: S355J2+N (St 52.3) - ADR suction/pressure tank type K 14.0 / 28 PE - Slide piston with 3 locking positions - Suction from open waters possible ("Comfort version") via cassette boom with integrated filter - Tank truck equipment ADR – Type class AT/FL L4BH - Discharge via pneumatically operated piston - Sludge water drain DN 80 for back-flushing via boom Vacuum System - CVS VacuStar 1600 – approx. 1,550 m³/h at 400 mbar - Hose storage cassette with telescopic boom DN 125 - Outreach on operational side: 5,200 mm - Additional suction hose reel with through-suction, right rear, approx. 30 m DN80 High-Pressure System - Uraca KD 718 – approx. 315 l/min at 170 bar - Large high-pressure hose reel for 240 m DN 25, swivels 180° - Fitted with 160 m DN 25 - Small high-pressure hose reel for 80 m DN 13, hydraulically operated - Fitted with 80 m DN 13 Special Features - Hose storage cassette with telescopable boom DN 125 - Infinitely variable height adjustment of the suction hose (hydraulic, roller guide carriage) - Boom arm hydraulically telescopable, swivels 180° - ADR L4BH, incl. EX/II, EX/III and AT - Spray gun - LED rotating beacons - LED ambient lighting - Work functions operable via CAN-BUS remote control - Radio remote control with 14 functions - Hot water hand wash station - Large cabinet rear left (e.g. for push camera) - Reversing camera - Pump compartment noise insulation - Toolbox - Traffic cone holder - Vice - Ladder - Advertising boards on both sides approx. 3,000 × 600 mm Special Equipment - Axle load measuring system - Front axle: 9.0 t - Digital radio DAB/DAB+ - ADR equipment package - Right exterior mirror with maneuvering position - Battery 220 Ah - Interactive multimedia cockpit - 24V / 100 A electrical preparation in cab - High-beam assistant & cornering light - Traffic sign recognition - Movable entry to driver's cab Cjdpfx Aqsxc Sy Eetjhb - Front springs: 9.0 t / 4-leaf - Tinted windscreen with sunband - ADR type FL – speed limiter system - 16-speed gearbox G 280-16 - Gearbox lock (independent of transmission) - Rear axle crown wheel 300 - 3-piece mudguards with splash protection - 430 l aluminum fuel tank (right) - Cool box / refrigerator - Reinforced engine brake - Trailing axle: 9 t, steered, relievabale - Navigation system - PTO – smooth flange - PTO, independent of transmission & dependent on clutch MB 1.65 - Parameterizable special module - Frame extension 1,650 mm - Smoker's package – rain sensor - Tire pressure monitoring system - Reversing warning buzzer (acoustic) & warning flash light - Two additional remote keys - Circuit breaker - Comfort suspension seats, driver & passenger - Armrest

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 582.537 km, prva registracija: 04/2009, vrsta goriva: dizel, konfiguracija osi: 10x4, gorivo: dizel, zavore: retarder, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, Leto izdelave: 2009, Oprema: ABS, električno nastavljivo ogledalo, električno upravljanje oken, filter saj, klimatska naprava, parkirni grelec, retarder, spojler, tempomat, žerjav, = Additional Options and Equipment = - Aluminum fuel tank - Low noise emission - Speed limiter - Refrigerator - Air suspension - Air horn - Particulate filter - Sun visor - Stability control - Auxiliary heater - Toolbox - Power take-off (PTO) - Central lubrication system = Further Information = Axle Configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Steered Rear axle 2: Dual tires Rear axle 3: Dual tires Weights Unladen weight: 36,399 kg Payload: 17,601 kg gross vehicle weight: 54,000 kg Functional Mast: Telescopic (8 sections) Mast length: 24 m Lifting capacity: 30,000 kg Lifting height: 2,400 cm Crane: FASSI F1500AXP.28, mounted behind the cab Body brand: FASSI F1500AXP.28 CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request Identification Registration number: BV-XP-06 DAF XF 105.510 10X4 Tractor Unit + FASSI F1500AXP.28 Crane EURO 5 | L PACKAGE | 480 HP DRIVETRAIN 10X4 WHEELBASE 570 CM AIR SUSPENSION Cedpfsuxu Thsx Aqtehb XF SLEEPER CAB WITH AIR CONDITIONING, AUXILIARY HEATER, REFRIGERATOR MANUAL TRANSMISSION FIFTH WHEEL MULTIPLE TOOLBOXES FASSI F1500AXP.28 CRANE 150 T/M CRANE!!! 2X OIL COOLERS FOR CRANE HYDRAULICS 8X HYDRAULIC EXTENSIONS WORKING HEIGHT 24 METERS MAX LIFTING CAPACITY 30,000 KG MAX LIFTING CAPACITY AT 19.4 METERS: 4,465 KG CENTRAL LUBRICATION SYSTEM ON THE CRANE 4X OUTRIGGERS REMOTE CONTROL FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Stanje: skoraj kot novo (rabljeno), Falch Trail Jet 15, 06/2024, kot nov z garancijo, 232 delovnih ur Chsdpjwz Scajfx Aqteb

Stanje: rabljeno, Leto izdelave: 2012, številka stroja/vozila: ET192, Tehnične specifikacije in podatki o zmogljivosti Ta Kosme TOP 2 HM 16 720 je visokohitrostni stroj za etiketiranje s taljenim lepilom, zasnovan za zanesljivo delovanje v proizvodnji pijač in industrijski embalaži. Optimiziran za PET-posode, podpira zahtevne procese v rabljeni liniji za polnjenje in zagotavlja natančnost etiketiranja pri visokih hitrostih. Proizvajalec: Kosme Model: TOP 2 HM 16 720 Leto: 2012 Uporaba: Etiketiranje s taljenim lepilom za PET-posode Hitrost proizvodnje: do 20.000 steklenic na uro (odvisno od formata) Število postaj za etiketiranje: 1 Število plošč: 16 Nastavitev glave: na voljo Optični sistem za centriranje: vključen Vrste posod: PET (osnovna konfiguracija) Dimenzije: Š 1900 mm × D 3000 mm × V 2300 mm Teža: 2500 kg Električni priključek: 400 V, 50 Hz, 9 kW Stanje: skladiščeno (rabljen stroj) Dokumentacija: navodila so na voljo Napredni sistemi za avtomatizacijo in nadzor Ta stroj za etiketiranje Kosme je zasnovan za dosledno in ponovljivo delovanje ter ima natančen sistem za nanašanje taljenega lepila za cilindrične PET-steklenice in nastavljive parametre za podporo spreminjanju formata pri standardnih formatih pijač. Stroj je opremljen s standardnimi varnostnimi funkcijami in osrednjo nadzorno površino za spremljanje pomembnih parametrov med etiketiranjem. Sistem za nanašanje taljenega lepila, zasnovan za močne in čiste lepilne spoje pri visokih hitrostih Elementi za upravljanje za prilagoditev formata in nadzor proizvodnje Električni priključek: 400 V, 50 Hz, 9 kW priključena moč Integrirane varnostne naprave za zaščito operaterjev in zagotavljanje razpoložljivosti Možnost integracije v proizvodne linije Ta enota se lahko brez težav integrira v celotno rabljeno linijo za polnjenje z vmesnimi sistemi za čiščenje in polnjenje ter nadaljnjimi napravami za zapiranje, pregled in pakiranje. Standardni priključki in komunikacijski signali olajšajo sinhronizacijo s tekočimi trakovi, vmesnimi območji in napravami za nadzor kakovosti. Združljiv s standardnimi komponentami proizvodnih linij za pijače: čiščenje, polnjenje, zapiranje, transport in pregled Podpora za spreminjanje formata s pomočjo nastavitve glave in konfiguracije plošč Primerno za obratovanje z več različnimi izdelki (SKU) znotraj družine PET-steklenic Uporabno v proizvodnih okoljih za pijače: voda, sokovi, pivo, vino in drugo Stanje stroja in zgodovina vzdrževanja Stroj je trenutno skladiščen in se ponuja kot rabljena oprema. Predstavlja trdno podlago za hitro uvedbo v obratovanje, če je potrebna zanesljiva rešitev za etiketiranje. Navodila so na voljo za podporo pri zagonu, delovanju in preventivnih postopkih vzdrževanja. Fizični ogledi in preizkusno delovanje lahko organiziramo v okviru postopka nakupa za preverjanje. Operativna zmogljivost... Cjdsvguc Ispfx Aqtehb

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, število predalov: 10, trajanje garancije: 12 meseci, Predmet prodaje je skladišče za shranjevanje stekel dimenzij 160 cm x 255, prostornina predala 900 kg, število predalov 10 kosov: Skladišče je namenjeno steklu, kremenčevim sintram, polikarbonatu, pohištvenim ploščam, kamnu ali drugim ploščnim materialom. Revija ima moč drsnih, rahlo nagnjenih predalov. Cedpfed Tamlex Aqtohb Zahvaljujoč njej lahko prihranite do 75% prostora, saj so vsi predali vzporedni in so poceni le 10 milimetrov. Ponujamo različne izvedbe in nosilnosti, po spremembah v delovnem stanju pa še skladišče z različnimi parametri, vašim posameznikom in pogoji želja. Revija je še posebej priporočljiva za steklarska, kamnita, pohištvena in oglaševalska podjetja, odvisna pa je tudi od načrtovanega območja gojenja.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, število predalov: 10, trajanje garancije: 12 meseci, Predmet prodaje je skladišče za shranjevanje stekel dimenzij 321 cm x 255, prostornina predala 1500 kg, število predalov 10 kosov: Skladišče je namenjeno steklu, kremenčevim sintram, polikarbonatu, pohištvenim ploščam, kamnu ali drugim ploščnim materialom. Chedpfegfm Nmjx Aqtjb Revija ima moč drsnih, rahlo nagnjenih predalov. Zahvaljujoč njej lahko prihranite do 75% prostora, saj so vsi predali vzporedni in so poceni le 10 milimetrov. Ponujamo različne izvedbe in nosilnosti, po spremembah v delovnem stanju pa še skladišče z različnimi parametri, vašim posameznikom in pogoji želja. Revija je še posebej priporočljiva za steklarska, kamnita, pohištvena in oglaševalska podjetja, odvisna pa je tudi od načrtovanega območja gojenja.

Stanje: rabljeno, Leto izdelave: 2015, Pregled Stroj je zasnovan za visoko hitrostno obodno etiketiranje z role. Stroj prihaja iz proizvodne linije in je popolnoma delujoč. Ni več v proizvodnji, vendar je možen ogled. Tehnični podatki: - Proizvajalec: Krones, Nemčija - Model: Contiroll HS 810-720 - Leto izdelave: 2015 Cedpfx Aqsyhgwdotjhb - Stroj za ravnanje z vratovi, možna prilagoditev - Formati: 1,5 l in 2,0 l - Etiketirne naprave: 1 (glava za mokro lepljenje), 2 zalogovnika - Smer delovanja: desni stroj - Proizvodna zmogljivost: 50.000/h - Obdelane etikete: IZ ROLE - Napajanje: 400 V ± 5 %, 50 Hz ± 1 %, 3P + N + PE, pomožno napajanje 24 V DC

Stanje: rabljeno, Leto izdelave: 2008, Pregled Stroj je zasnovan za visoko hitrostno obodno etiketiranje iz role. Stroj izvira iz proizvodne linije in je popolnoma delujoč. Model se več ne proizvaja, je pa možen ogled. Tehnični podatki: - Proizvajalec: Krones, Nemčija - Model: Contiroll - Leto izdelave: 2008 - Aplikatorji etiket: 2 (mokro-lepilni glavi) - Smer delovanja: Desna izvedba, vzporedno na eni strani stroja - Proizvodna zmogljivost: 45.000/h - Obdelovane etikete: V ROLI Chedpfx Aqoyhgqqeteb - Napajanje: 400 V ± 5 %, 50 Hz ± 1 %, 3P + N + PE, pomožno napajanje 24 V DC

Stanje: rabljeno, električno ogrevan Ogrevanje je mogoče ločeno uravnavati v dveh conah brezstopenjska hitrost širina sledi ± 1.000 mm 270 kW, 411 A pokrov z električnim dvigalom primerno za injekcijo pare (ogrevanje, izkoristek produkta) primerno za čistilni sistem »CIP« z drobno žično trakom zunanja mera (D x Š x V): ± 9.000 x 2.600 x 3.700 mm v dobrem stanju Popolnoma mehansko obnovljeno: Novi ležaji, verige, tesnila, drsne puše, zobniki itd. Chedpfx Aozxn I Rsqtjb Vsi (motorno) pogonjeni pogoni so obnovljeni ali popolnoma zamenjani pokrov in posoda sta popolnoma novo izolirana nova mrežasta traku, standardne mere za prigrizke vsi deli, ki so občutljivi na obrabo, so zamenjani ali popolnoma obnovljeni splošno čiščenje, obnova in pregled konstrukcije Popolnoma električno obnovljeno + posodobitev omarice in nadzora: vse električne komponente in kabli so popolnoma zamenjani konvencionalno upravljanje s tipkami in Jumo-temperaturnim PID-regulatorjem nove električne sheme (E-plan) novi senzorji označevanje komponent in kablov Novi električni grelni elementi: novi ukrivljeni grelni elementi popolnoma na novo ožičeno električno testirano, ogreto in premerjeno

Stanje: rabljeno, primerno za termo-oljno ogrevanje (180 kW) Najvišja temperatura pečenja 220–250 °C nastavljiva temperatura brezstopenjska hitrost širina tira 600 mm pokrov z električnim dvižnim mehanizmom primerno za parno injekcijo (ogrevanje, izkoristek proizvoda) 400V-50 Hz-42A Cedpfx Aqszwdczetehb Mere (D x Š x V): ± 10.000 x 2.000 x 2.700 mm min. čas pečenja: 4 min maks. čas pečenja: 60 min

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Leto proizvodnje 2008, 3160 delovnih ur, servis opravljen na novo, zelo dobro vzdrževan, NOVA HD črpalka pri FALCH-u. Csdpfx Aowy Elloqtehb

Stanje: novo, Leto izdelave: 2025, Furnace output: 49 kW Codepn Nyzjpfx Aqtjhb Working output: 45 kW New device, original packaging: Yes Warm air blower, flue gas blower, electronic controller with digital display: included Fresh air filter, recirculation intake filter: large-area intake filter without performance loss / included Warm air distribution ducts: 2 x 200 mm with plug-in, freely rotating 90° elbows Flue diameter: 180 mm Furnace chamber length: 660 mm Furnace chamber width: 480 mm Furnace chamber height: 600 mm Air delivery: 3,500 m³/h Intake air filter: Yes, large-area filter without performance loss Power consumption: 550 W Designed for room volume: 1,000 m³ Weight: 310 kg

Stanje: novo, Leto izdelave: 2025, Furnace output: 34 kW Working output: 29 kW New device, original packaging: Yes Warm air blower, flue gas fan, and control panel with digital display: included Warm air distribution pipes: 2 x 180 mm with 2 freely rotatable, plug-in bends Intake/air filter: large-surface fresh air filter with no loss of performance / included Flue outlet diameter: 160 mm Combustion chamber length: 500 mm Combustion chamber width: 400 mm Combustion chamber height: 590 mm Chedpfx Aepkwhqjqtjb Air delivery: 2200 m³/h Power consumption: 400W Designed for room volume: 500 m³ Heatable area: 100/150 m² Stove height without warm air pipes: 1560 mm Stove width: 550 mm Stove length without flue gas fan: 920 mm Weight: 200 kg

Stanje: novo, Leto izdelave: 2025, Furnace output: 510 kW Effective output: 407 kW New equipment, original packaging: Yes Flue outlet diameter: 250 mm Hot air distribution ducts: 4 x 350 mm Combustion chamber length: 1900 mm Combustion chamber width: 900 mm Chjdpfsk Utrwex Aqtob Combustion chamber height: 900 mm Air delivery: 26,000 m³/h Power consumption: 4,500 W Designed for room volume: 8,000 m³ Heatable area: 1,800 m² Furnace height without hot air ducts: 3,000 mm Furnace width: 1,220 mm Furnace length without flue gas fan: 2,700 mm Weight: 1,575 kg