Optimus Sorter Projects B.v. (Bowe Group Optisorter Horizontal nakup rabljenega (18.380)

Stanje: novo, Leto izdelave: 2026, The illustrative photos show examples of projects for the customer utilizing the 4x7 booth. Dwedpsr Ha Ehofx Aflea The offer applies only to the spray booth without a preparation area (possibility to purchase a preparation zone on request). - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm - Entrance door: 3000x2600 mm (triple-leaf) - Service door: 640x1800 mm - Frame: stainless steel - Heat exchanger: stainless steel - Panels: mineral wool insulated - Total power: 16 kW - Fully grated floor - Air supply system: jet turbine 4.0 kW - 2 units - Exhaust system: power turbine 5.5 kW – 1 unit - Ceiling lights: cassette units with 32 LED fluorescent lamps - Side lighting: LED panels 120x30cm - 8 units Output: 48 W – each 1000 lumens - Burner: Riello 40 G20 95-213 kW - The booth is available in various colors

Stanje: novo, Leto izdelave: 2026, - External dimensions: 7200x5200x3800 mm - Internal dimensions: 7100x5100x3100 mm Djdpfsm Tv I Aox Aflewa - Entrance gate: 4000x3100 mm (four-winged) - Service door: 640x1800 mm - Construction: stainless steel - Heat exchanger: stainless steel - Panels: filled with mineral wool - Total power: 21 kW - Seating: inside/outside (can be installed after the cabin is roofed by the customer) - Floor: fully sanded - Air supply system: jet turbine 5.5 kW – 2 pcs - Exhaust system: jet turbine 7.5 kW – 1 pc - Ceiling lights: cassettes with LED fluorescent lamps, 32 pcs - Side lights: LED panel 120x30 cm – 12 pcs Output: 48 W – single piece 1000 lumens - Burner: Riello RG5S 160-310 kW - The cabin is available in various colors

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Detailed specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) Dedpfx Aexna U Ujfljwa - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove design; 0.5 mm steel sheet with mineral wool core - Chamber: Panels 100 mm thick, insulated with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating capacity: 200,000 kcal/h, 1 set in total - Roof: Panels 100 mm thick, insulated with mineral wool - Control system: Heating control, timer setting, fault indicator, emergency stop switch, hour meter, temperature limit controller, total runtime display - Total power: 6 kW - Overhead transport system: 4 rails; maximum load 400 kg per rail We manufacture ovens in any dimensions. We provide complete systems with transport beams, spray walls, and powder coating guns – see visualisations in the photos.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna višina: 5.850 mm, skupna dolžina: 12.125 mm, skupna širina: 5.150 mm, skupna masa: 8.000 kg, trajanje garancije: 12 meseci, notranja višina: 5.000 mm, notranja dolžina: 12.000 mm, notranja širina: 5.000 mm, Oprema: kabina, osvetlitev, PAINT SPRAY BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: - 2x supply air fans - 2x exhaust air fans TECHNICAL SPECIFICATIONS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance gates: 4000x4800 mm (2 units, four-winged, with reinforced hinges) - Additionally, a BOX measuring 1650 mm x 8000 mm must be taken into account – can be positioned on the right or left side. - Construction: galvanized steel frame structure - Heat exchanger: high-quality stainless steel - Panels: filled with mineral wool - Drive-on ramps – 2 units - Fully grated floor The reinforced frame structure prevents vibrations and the air surge effect from the main supply air duct. Double-layered roof design: - Outer top layer - Inner truss construction with V600 ceiling filter Air circulation system: - Supply air system: jet turbine 7.5 kW – 2 units Dwsdpfx Afsxm U Exslsa - Exhaust air system: jet turbine 7.5 kW – 2 units Air filter system: - Pre-filter captures particles >10 μm - Ceiling filter captures particles >5 μm - Floor filter: Paint Stop - Activated carbon filter Lighting: - Ceiling lighting: 52 LED fluorescent tubes (14 slanted fixtures, each with 4 tubes) - Side lighting: 26 LED panels integrated in the right, left, and rear walls Burner: Riello – 2 units, Oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating-up time: 8–15 min. (max. 80°C) Optional equipment: - Boxes on the booth roof - Insulated roof - Pass-through doors - Water wall - Paint finish according to RAL color chart - EX version (explosion-proof) available

Stanje: novo, Leto izdelave: 2026, - External dimensions: 8125x4650x4600 mm - Internal dimensions: 8000x4500x3800 mm - Entrance gate: 4000x3800 mm (four-leaf) - Service door: 640x1800 mm - Structure: Stainless steel - Heat exchanger: Stainless steel - Panels: filled with mineral wool - Total power: 22 kW Dwodsnbdlbjpfx Afloa - Seating: inside/outside (after prior roof installation of the cabin by the customer) - Floor completely abraded - Air supply system: Jet turbine 5.5 kW - 2 units - Exhaust system: Jet turbine 7.5 kW – 1 unit - Ceiling lights: Cassettes with LED fluorescent lamps, 36 pcs. - Side lights: LED panel 120x30 cm - 12 pcs. Power: 48 W – single unit 1000 lumens - Riello RG5S burner 160-310 kW - The cabin is available in various colors

Stanje: pripravljen za uporabo (rabljen), D&K System Jr. Leto izdelave: 2006 Maks. format: 68 x 76 cm Min. format: 20 x 28 cm Obdeluje papir do 500 g/m² Enostranski termalni laminator za folijo Accufeed Jr. Avtomatski podajalnik listov, Acculam Jr. laminator, Accu-III Jr. Avtomatski ločevalnik listov, Izlagalna mizica z tresilcem Djdpfx Aswhcfxoflowa

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Dosing/Filling Line The dosing/filling line consists of: 1. Product pump with intake hopper Manufacturer: Rademaker B.V. Dimensions: 1700 mm x 1100 mm x 2250 mm 2. Dosing unit Dimensions: 1700 mm x 1100 mm x 2250 mm 3. Conveyor belt Manufacturer: Meyer Plastic mesh belt Belt width: 910 mm Total dimensions: 3400 mm x 1500 mm x 1690 mm Including trolley with additional components. Djdpfx Aswaty Roflewa

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vertical form, fill, and seal packaging machine Dwodpfx Afjv Utd Helea Brand: Jasa Packaging Solutions B.V. Model: PMT Horizontal seal length: 270 mm Film width: 620 mm Overall dimensions: 2800 mm x 1450 mm x 2350 mm.

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, skupna masa: 452 kg, Planer-thicknesser, jointer TECNOMAX FS 41 elite - after technical inspection, ready for operation Specification: • Condition: used, after comprehensive inspection • Manufacturer: TECNOMAX (SCM Group) • Model: FS 41 elite • Working width: 410 mm • Thicknessing height: 240 mm • Table length: 200 cm • Noise-reducing combs at the cutterblock • 3.0 kW motor • Three-knife cutterblock for traditional knives • Extraction port diameter: 120 mm • Two feed speeds (6 and 12 m/min) • Original paintwork • Weight: 452 kg • Year of manufacture: 2009 • Overall dimensions: 220 x 90 x 100 cm (L x W x H) Additional information: • The machine is in good technical condition and ready for immediate use • The photos shown represent the actual condition of the item for sale • The machine can be started and inspected on site • The auction price does not include VAT or transport costs Financing and transport: • We arrange transport via MDD fleet, courier companies, or external hauliers • We offer financial solutions such as leasing or lease loan options Dwodsy Inuxopfx Afloa

Stanje: rabljeno, Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, For Sale – MICROPEEN Scale/Shot Blasting System MICROPEEN MPS 4-200-1S Monorail Shot Blasting System / Scale Removal System with Filter Unit Djdpfjy N Tbmsx Aflewa Description Offered for sale is a used MICROPEEN monorail shot blasting system / scale removal system, including filter unit, control cabinet, and workpiece suspension. The system is ideally suited for: - Scale removal - Cleaning - Derusting - Surface treatment of steel components - Processing of both series and individual parts Workpieces are conveyed into the blasting chamber via a monorail system. An integrated extraction and filter unit is also part of the system package. The machine comes from industrial use and is immediately available. Technical Data Manufacturer: MICROPEEN BENELUX B.V. Model: Sa Year of manufacture: 12/1991 Compressed air: 7 bar Voltage: 380/24 V System type: Monorail Shot Blasting / Scale Removal System Equipment • Blasting chamber • Monorail conveyor system • Filter unit / extraction system • Control cabinet • Pneumatic system • Workpiece carriers / hooks Condition • Used • Fully functional • Condition as shown in photos • Inspection possible upon request • Immediately available Price €10,500 net negotiable Location Germany Keywords Shot blasting system, scale removal system, descaling system, shot blasting machine, monorail shot blasting system, sandblasting system, surface preparation, MICROPEEN, steel cleaning, shot peening Short version for platforms MICROPEEN MPS 4-200-1S Shot Blasting System Used monorail shot blasting system with filter unit and control. - Year of manufacture 1991 - Compressed air 7 bar - 380/24 V - Complete plant - Immediately available Price: €10,500 net negotiable Ideal for descaling and cleaning steel components. Please refer to photos for condition.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Container capacity: 350 l, permissible operating pressure: 6 bar, permissible operating temperature: 90°C, motor manufacturer: Röchling, motor type: A3, flow grease quantity: 1 kg. Dsdpfx Ajt R Trxjflewa

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Working width: 900 mm, Length: 2,600 mm, Width: 2,600 mm, Height: 2,000 mm, Weight: 1.8 t, Operating hours: 5,866 h. Includes wet suction system. Documentation and maintenance reports available. On-site inspection possible. Dsdpfxjuzlg Dj Aflowa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, A complete pasta production line with 2x Cappelletti mould sets is available. 1) Pasta Technologies Group SRL dosing and mixing unit for pasta ingredients such as flour, water, and micro-ingredients. 2) Combined mixer and dough sheeter Pasta Technologies Group SRL MASA 540, year of manufacture: 2022, dough sheet thickness range: 7mm-8mm, dough sheet width: 540mm, corrugated rollers: 3, smooth roller pairs: 1. 3) 2x forming machines GEA/Pavan MRW 540, year of manufacture: 2011, pasta types: Ravioli/Cappelletti, production output Ravioli/Cappelletti: 140/120 cycles/min, dough sheet width: 540mm, machine dimensions L/W/H: approx. 1800mm/1700mm/1300mm, weight: approx. 1200kg, filler cart weight: approx. 210kg. Including 2x 3D Cappelletti moulds. 4) Double conveyor belt and waste recovery unit. 5) Pasta Technologies Group SRL RS100 dough refeed system with cyclone. 6) Complete line control and management by Pasta Technologies Group QEHD. Documentation available. On-site inspection possible. Dwedsw Dfgkjpfx Aflsa

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20250106, trajanje garancije: 12 meseci, skupna širina: 685 mm, skupna višina: 1.665 mm, skupna dolžina: 1.000 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 350 kg, notranja širina: 520 mm, notranja dolžina: 750 mm, notranja višina: 660 mm, vhodna napetost: 230 V, Oprema: dokumentacija / priročnik, kabina, osvetlitev, Kompaktna, spredaj upravljana, polavtomatska 2-v-1 kabina za abrazivno obdelavo, izdelana na Danskem, z odstranljivim bobnom za abrazivno obdelavo majhnih do srednje velikih delov / 3D-tiskanih komponent. - Prihranite čas, zrak in energijo. Djdpjvvmaqofx Aflswa - Prilagodljivo se prilagaja obliki obdelovanca. - Odpravlja zamudno ročno delo. - Odpravlja ozka grla v proizvodnji. - Enostavno in preprosto upravljanje zahvaljujoč polavtomatskemu delovanju. Integrirani rotacijski boben lahko po tiskanju neprekinjeno in samodejno odstranjuje plastične ali kovinske delce z majhnih delov. Šoba se lahko samodejno vklopi, ko se boben vrti. Po čiščenju delov je mogoče vpihniti čisti stisnjen zrak, da se odstrani preostali prah z delov. Boben je mogoče enostavno in hitro odstraniti za polnjenje ali praznjenje. Za ročno abrazivno obdelavo se boben odstrani in celotna kabina za abrazivno obdelavo se lahko upravlja prosto s pomočjo stopala. - Profesionalna kompaktna kabina za abrazivno obdelavo - 1 velika vrtljiva vrata s varnostnim stikalom - Varnostno steklo, zamenljivo steklena plošča - Gumirana notranja stranska stena - Integrirana notranja osvetlitev kabine - Stabilen nosilec šobe - Šoba(e) iz volframovega karbida - Stopalko za ročno abrazivno obdelavo - Manometer in regulator tlaka

Stanje: rabljeno, Leto izdelave: 1994, Vbrizgalni stroji Main Group tipa Vilor za proizvodnjo plastičnih elementov; uporabljeni so bili za proizvodnjo podplatov in komponent za obutev; poleg strojev je možna tudi prodaja kalupov za podplate obutve; stroji so delovali do konca, zadnja 4 leta niso bili v uporabi; dobro ohranjeni – potrebna obnova; Dedpfx Aey Egvpsflowa

Stanje: novo, TURBO-BOOST-TEST – preizkusna klop za testiranje nadtlačnega polnilnika omogoča profesionalno kalibracijo in oceno učinkovitosti turbopolnilnikov. Klop se uporablja pri nastavitvah in optimizaciji turbin, v proizvodnji hibridnih turbin ter za preverjanje sprememb zmogljivosti po tuningu. Naše preizkusne klopi so napredni sistemi za nastavitev in testiranje turbopolnilnikov v dinamičnem načinu delovanja. Omogočajo preizkus turbopolnilnikov v skoraj realnih obratovalnih pogojih, s popolnim nadzorom procesa in zaznavanjem morebitnih težav, vključno z uhajanjem olja. POUDARKI • Celovito testiranje in tuning avtomobilskih turbopolnilnikov za motorje do 3 litre • Dinamično testiranje turbopolnilnikov • Namestitev na standardne pritrdilne površine • Uvajanje in preverjanje uhajanja olja • Nastavitev elektronsko krmiljenih turbin prek zunanjega testerja ATP-3000 Dwsdpettg S Uofx Aflja • Namestitev turbopolnilnikov vseh izvedb KLJUČNE FUNKCIJE • Več kot 2000 turbopolnilnikov v podatkovni bazi • Izračun učinkovitosti turbopolnilnika • Prikaz grafa nadtlaka glede na pretok na vstopu in izstopu • Generiranje rezultatnega grafa • Preizkus aktuatorjev: vakuumski, pnevmatski in električni aktuatorji • Diagnostika električnih servo-pogonskih aktuatorjev (opcijsko) • Vsa merjenja v realnem času • Kalibracija preizkusne klopi pred začetkom dela • Preizkus funkcije ventila N75 • Vgrajena puhalna črpalka za stalni zračni tok • Lastno razvita programska oprema Boost Test • Izdelava in tiskanje poročil o poteku tuninga • Samodiagnostika TEHNIČNI PODATKI Maksimalna hitrost rotorja: 99.000 vrt./min. Maksimalni pretok zraka kompresorja: 110 m³/min Maksimalni tlak kompresorja: 900 mbar Maksimalni vakuum vakuumske črpalke: -800 mbar Napajanje: 380 V, 3-fazno, 50 Hz Poraba moči: 6 kW Dimenzije: 1330 × 770 × 1440 mm Teža: 265 kg

Stanje: novo, STROJ ZA URAVNOTEŽENJE KARDANSKIH GREDI BVI-03-88 Stroj za uravnoteženje namenjen profesionalnemu servisu kardanskih gredi do 200 kg. Trdo-ležajni stroj je prilagojen za težke kardanske gredi tovornjakov in specialnih strojev. Visoka občutljivost nosilcev omogoča tudi kakovostno uravnoteženje kardanskih gredi osebnih vozil. Stroj je zasnovan za uravnoteženje kardanskih gredi v prostorih specializiranih servisov za popravilo kardanskih gredi. Stroj je možno hitro prekonfigurirati za uravnoteženje večje količine posameznih kardanskih gredi raznih izvedb ter tudi za izdelavo manjših serij. . . . DVEKRAT hitrejši od vašega stroja. Ta stroj za uravnoteženje je zasnovan, da kardanske gredi uravnoteži ne le kakovostno, temveč tudi izjemno hitro. Če lahko uravnotežite dva- do dva- in polkrat hitreje, je to vaša resnična konkurenčna prednost. . .. ... VISOKO UČINKOVITI PRIBOR Stroj je opremljen s tremi glavnimi tipi adapterjev: 1. Hitra univerzalna vpenjala. Ima dve glavni prednosti: Prva je, da posebna konstrukcija omogoča vpenjanje prirobnice kardanske gredi v 5 sekundah. To prednost omogoča dejstvo, da prirobnice ni treba pritrditi z vijaki. PRIHRANEK ČASA – KARDANSKA GRED JE VPETA 4x HITREJE BREZ VIJAKOV. Dodpfsn E Skwsx Aflewa Druga prednost so centrirni obroči. Kardanska gred se namešča v adapterje s centrirnimi obroči, ki jih je mogoče običajno izdelati na klasičnem stružnem stroju za večino standardnih kardanskih gredi. 2. KV-prirobnični adapterji. Uporabljajo se za uravnoteženje kardanskih gredi s križno-zobčastimi prirobnicami. Pokrivajo štiri velikosti prirobnic: 120, 150, 180, 205 mm. Običajno se uporabljajo pri tovornih vozilih. 3. Adapter z režami. Uporablja se za namestitev različnih prirobnic z luknjami. Nameščanje gredi poteka podobno kot pri univerzalnih adapterjih, s pomočjo centrirnih obročev. KLJUČNE LASTNOSTI • Uravnoteženje 2-, 3- in 4-podpornih kardanskih gredi • Dolžina gredi do 5200 mm, teža do 200 kg • Namestitev kardana v 1 minuti • Standardni komplet adapterjev – pokrivanje 80 % kardanskih gredi • Trije načini pritrditve srednjega ležaja • Trdo-ležajni stroj – varno uravnoteženje tudi pri veliki začetni neuravnoteženosti • Upravljanje z enim delavcem • Premični zadnji vpenjalni konus – hitra menjava, udobno delo • Zaščitna pregrada s spono za hitro nameščanje • Meritve v vseh ravninah hkrati • Kalibracija stroja s strani upravljavca • Prikaz neuravnoteženosti v realnem času • Izdelava in tiskanje poročil TEHNIČNE LASTNOSTI Maksimalna teža kardanske gredi: 200 kg Maksimalni premer prirobnice: 300 mm Maksimalna dolžina kardanske gredi: 5200 mm Število podpor stroja: 4 Število hkrati merjenih ravnin: 2, 3, 4 Minimalni dosegljiv preostali specifični neuravnoteženost: 10 g mm/kg Območje hitrosti rotorja: 1000-2500 min⁻¹ Napajanje: 380V, 3 faze, 50Hz Minimalna poraba energije: 3 kW Dimenzije (d × š × v): 6000 × 1100 × 1450 mm Teža: 1100 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, številka stroja/vozila: 140311, največja širina rezanja: 1.150 mm, Oprema: dokumentacija / priročnik, Rezalnik papirja – DATIEN 115 ECE skupina SBL Model: CT – 115 ECE Leto izdelave: 2014 Serijska številka: 140311 Dedpst U D Hujfx Aflewa Stanje: Odlično. Rezalnik je bil uporabljen zelo malo. Stroj je priključen, možnost testiranja. Rezervni rezili – 2 kosa, skupaj 3 kosi. Popolna tehnična dokumentacija. Privlačna cena za hitro prodajo.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna masa: 3.300 kg, ⭐️TM-R34 Column Lift for Trucks – Electro-hydraulic, Wireless⭐️ New, reinforced generation of TM-GROUP mobile column lifts The TM-R34 lift is a technologically advanced solution designed for professional workshops servicing trucks, buses, trailers, specialist vehicles, and agricultural machinery. A set of four mobile columns offers a total lifting capacity of 34 tonnes, making the device more than capable of handling even the most demanding service tasks. Each column is equipped with a high-performance electro-hydraulic system and provides a lifting capacity of 8,500 kg, offering a real advantage over many solutions currently available on the market. A novelty in the TM-R34 model are the additional reinforced support columns on wheels (so-called mobile axle stands), which are included as standard. They provide even greater stability when working under maximum load and offer additional safety during long-term maintenance work. Technical specifications: - Model: TM-R34 - Total lifting capacity: 34,000 kg - Lifting capacity per column: 8,500 kg - Number of columns: 4 - Lifting height: 1,800 mm - Column height: 2,563 mm - Supported wheel diameter: 480–1,270 mm - Connection type: wireless / signal cable - Power supply: 230V - Motor power: 3 kW - Weight per column: 760 kg - Support columns: 4 units included - Certifications: CE, ISO 9001:2015 Support stand specifications: - Maximum lifting capacity: 8,165 kg - Minimum height: 1,240 mm - Maximum height: 1,840 mm - Number of adjustment positions: 7 - Threaded adjustment range: 40 mm - Base dimensions: 810 mm - Rubber top pad: 150 mm ✅ Wireless control and technology The TM-R34 operates in wireless or wired mode, providing full flexibility of use. Columns communicate via radio and are fully synchronized. Control is from the panel on each column, with real-time operation monitoring. The system can be used in single or combined mode. ✅ Reinforced design and performance The TM-R34 lift features an increased capacity of up to 34T (8,500 kg per column) and is powered by 3 kW / 230V motors. The 480–1,270 mm wheel range covers most heavy-duty vehicles. The mobile design allows fast repositioning without installation. ✅ Safety and certifications The Safety Lock system secures the load at height, and each post has an emergency STOP. The set includes 4 mobile support columns, which increase stability under high loads. The device is ISO 9001:2015 and CE certified. Dedpfxjv Uk D Ro Aflewa ✅ TM-R34 – more capacity, greater stability, total control The TM-R34 lift addresses the needs of modern workshops that demand maximum efficiency, mobility, and safety. Increased 34T capacity, additional mobile supports, and wireless synchronization make this one of the strongest and most functional solutions in its class.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: N1A665853, teža orodja: 30.000 g, vhodna napetost: 400 V, Machining Center Rumba – 4-Axis Machining length: 4000 mm CNC controlled machining center with vertical spindle, suitable for processing extruded aluminum profiles, light metals, PVC, and steel from 3 sides. CNC-controlled tilting work table: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4 kW electrospindle, 18,000 rpm, inverter-controlled, with rapid tool change (tool changer) and ISO30 spindle. Numeric control for X, Y, Z, and W axes interpolation. Brushless motors for X, Y, Z, and W axis positioning. Includes 4 double pneumatic clamps, software-based tool diameter correction. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touchscreen with simplified graphics based on Windows system, Teamviewer for remote maintenance, specialized HICAM 2 / CAMPROX software for loading ISO files and running programs). Capable of machining longer parts. Standard equipment: - 4 kW ISO30 electrospindle - 4 pneumatic (manually adjustable) clamps - Safety guard - Automatic tool changer (10 tools) - 4x ISO30 taper sleeves with tool included - 3x chip collection bins - Air nozzle Technical data: - X axis stroke: 3000 mm / 4000 mm - Y axis stroke: 400 mm - Z axis stroke: 300 mm - Rapid traverse (X, Y, Z): 50 m/min - Acceleration (X, Y, Z): 1.5 m/s² Dedpfxowgm Ibj Aflewa Electrospindle: 6.6 kW HSK63 Spindle cooling: Air and liquid cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (saw blade) Operating pressure: 7 bar Weight: 2500 kg

Stanje: novo, Saw blade diameter: 600 x 30 mm Cutting capacity at 90 degrees: round 215 mm Cutting capacity at 90 degrees: square 195 x 195 mm Cutting capacity at 90 degrees: flat 140 x 395 mm Cutting capacity at 45 degrees: round 170 mm Cutting capacity at 45 degrees: square 170 x 170 mm Cutting capacity at 45 degrees: flat 100 x 175 mm Dwsdsxaccfopfx Aflea Speed: 2800 rpm Total power requirement: 3.0 kW Machine weight: approx. 310 kg Dimensions (L x W x H): 1077 x 1214 x 1558 mm Features: - Semi-automatic high-performance circular saw (UNDER-TABLE design) * For cutting from 0° to 180° to the right and left * Suitable for aluminium and light metal alloys * With rising saw blade * Exceptionally large cutting range (saw blade ø 600 mm) * Digital display for angle adjustment 0° - 180° - Manually operated safety hood - Hydro-pneumatic saw blade feed (via two-hand control) - 2x pneumatic vertical vices with quick adjustment - Heavy cast iron construction for vibration-free operation and maximum precision - Large rotating table with internal indexing at 0°/45° * Allows rapid adjustment for mitre cuts - Extraction port for connection to a chip extraction system - Pneumatic spray unit for blade cooling and lubrication - Machine stand - Powerful saw drive with 3-phase motor, 3 HP Scope of delivery: - 1x carbide-tipped saw blade, ø 600 mm - Air blow gun - Full protection cover - Tool kit - Detailed operating and maintenance manuals, etc.

Stanje: novo, Saw blade diameter 0 x 30 mm Cutting capacity at 90 degrees: round 130 mm Cutting capacity at 90 degrees: square 125 x 125 mm Cutting capacity at 90 degrees: flat 190 x 100 / 230 x 50 mm Cutting capacity at degrees: round 110 mm Cutting capacity at degrees: square 95 x 95 mm Cutting capacity at degrees: flat 130 x mm Speed 2800 rpm Mitre cuts -/+ degrees Total connected load 2.2 kW Machine weight approx. 2 kg Dimensions (LxWxH) 1600 x 750 x 1000 mm Equipment: - Semi-automatic high-performance circular saw (UNDERFLOOR DESIGN) * for cuts from ° right to ° left * for aluminium and light metal alloys * with upward-moving saw blade - Manually operated safety cover (optional with pneumatic opening) - Hydro-pneumatic saw blade feed (via two-hand operation) - Heavy cast iron construction ensures vibration-free operation and maximum precision - Large bearing-mounted rotary table with internal indexing at 0/° * Enables quick adjustment for mitre cuts - Extraction port for connection to chip extraction system Scope of delivery: - 2x pneumatic vertical clamps with quick adjustment Dodpfjxaa Huox Aflewa - Tool set - Comprehensive operating and maintenance manuals - Air blow gun - Machine is supplied without saw blade!

Stanje: novo, A premiere in Turkey; our company manufactures the machines that enable the production of single-layer insulation panels under our own patent and license. Our sandwich panel machines operate in 30 different regions worldwide. Single-layer insulation panels are also referred to as economical eco-sandwich panels. Please contact us for further information and technical documentation. Djdpfx Afof Nqlqslswa

Stanje: novo, Trapezoidal drawing machine with new technology consists of the following components: hydraulic roller opening and loading carriage, 10-T polyethylene protective film coating unit, metal sheet alignment unit, metal roll forming unit, 18- and 36-station configuration depending on profile type, flying shear unit for continuous length cutting, automatic stacking and packaging unit, Siemens automatic electrical control system. All our machines are CE certified. Please contact us for further information and technical documents. Dwsdpfjf Nqghox Aflsa

Stanje: novo, Fully automatic roof tile machines with metal presses in roof tile design, available in the desired sizes; please contact us for further information and technical documentation. Dwodpfx Afjf Nqi Ielea