Lakirna kabina 12x5x5 m z podkonstrukcijo

ABC-Group

Stanje: novo, Leto izdelave: 2026, The illustrative photos show examples of projects for the customer utilizing the 4x7 booth. The offer applies only to the spray booth without a preparation area (possibility to purchase a preparation zone on request). - External dimensions: 7000x4000x3500 mm Dusdpfxsr Ha Ehj Altsw - Internal dimensions: 6900x3900x2650 mm - Entrance door: 3000x2600 mm (triple-leaf) - Service door: 640x1800 mm - Frame: stainless steel - Heat exchanger: stainless steel - Panels: mineral wool insulated - Total power: 16 kW - Fully grated floor - Air supply system: jet turbine 4.0 kW - 2 units - Exhaust system: power turbine 5.5 kW – 1 unit - Ceiling lights: cassette units with 32 LED fluorescent lamps - Side lighting: LED panels 120x30cm - 8 units Output: 48 W – each 1000 lumens - Burner: Riello 40 G20 95-213 kW - The booth is available in various colors

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 825 mm, pomik po osi Z: 1.100 mm, hitro pomikanje X-os: 48.000 m/min, hitri pomik os Y: 80.000 m/min, hitri pomik na osi Z: 48.000 m/min, širina mize: 835 mm, dolžina mize: 3.500 mm, obremenitev mize: 3.500 kg, 3-Axis Machining Center MATEC - 40 HV MACH-ID 9178 Manufacturer: MATEC Model: 40 HV Control: Heidenhain iTNC530 Year of manufacture: 2008 X-axis travel: 3000 mm Y-axis travel: 825 mm Z-axis travel: 1100 mm B-axis: -3° to +105° Table length: 3500 mm Table width: 835 mm Table load capacity: 3500 kg X-axis feed rate: 48,000 mm/min Y-axis feed rate: 80,000 mm/min Z-axis feed rate: 48,000 mm/min Tool holder: HSK 100 ISO/BT/MK Spindle power: 37 kW Spindle speed: 8,000 rpm Tool changer: 40 positions Internal coolant supply: 25 bar Number of controlled axes: 4 Chip conveyor: Yes Dedpfxjwyv Nzj Altsuw Coolant system: Yes Length: 8,000 mm Width: 3,800 mm Height: 3,800 mm

Stanje: novo, Leto izdelave: 2026, - External dimensions: 7200x5200x3800 mm - Internal dimensions: 7100x5100x3100 mm - Entrance gate: 4000x3100 mm (four-winged) - Service door: 640x1800 mm Duodpfxsm Tv I Aj Altew - Construction: stainless steel - Heat exchanger: stainless steel - Panels: filled with mineral wool - Total power: 21 kW - Seating: inside/outside (can be installed after the cabin is roofed by the customer) - Floor: fully sanded - Air supply system: jet turbine 5.5 kW – 2 pcs - Exhaust system: jet turbine 7.5 kW – 1 pc - Ceiling lights: cassettes with LED fluorescent lamps, 32 pcs - Side lights: LED panel 120x30 cm – 12 pcs Output: 48 W – single piece 1000 lumens - Burner: Riello RG5S 160-310 kW - The cabin is available in various colors

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Detailed specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove design; 0.5 mm steel sheet with mineral wool core - Chamber: Panels 100 mm thick, insulated with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating capacity: 200,000 kcal/h, 1 set in total - Roof: Panels 100 mm thick, insulated with mineral wool - Control system: Heating control, timer setting, fault indicator, emergency stop switch, hour meter, temperature limit controller, total runtime display - Total power: 6 kW - Overhead transport system: 4 rails; maximum load 400 kg per rail Dedpfx Aloxna U Ueteuw We manufacture ovens in any dimensions. We provide complete systems with transport beams, spray walls, and powder coating guns – see visualisations in the photos.

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Dujdpfxet Hw Sho Altew Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Leto izdelave: 2026, - External dimensions: 8125x4650x4600 mm - Internal dimensions: 8000x4500x3800 mm - Entrance gate: 4000x3800 mm (four-leaf) - Service door: 640x1800 mm - Structure: Stainless steel - Heat exchanger: Stainless steel - Panels: filled with mineral wool - Total power: 22 kW - Seating: inside/outside (after prior roof installation of the cabin by the customer) - Floor completely abraded - Air supply system: Jet turbine 5.5 kW - 2 units - Exhaust system: Jet turbine 7.5 kW – 1 unit Djdsnbdlbjpfx Altsuw - Ceiling lights: Cassettes with LED fluorescent lamps, 36 pcs. - Side lights: LED panel 120x30 cm - 12 pcs. Power: 48 W – single unit 1000 lumens - Riello RG5S burner 160-310 kW - The cabin is available in various colors

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 55.771 h, laserske ure: 35.157 h, laserska moč: 3.200 W, najv. debelina pločevine: 20 mm, najv. debelina jeklene pločevine: 20 mm, maks. debelina aluminijaste pločevine: 8 mm, dolžina mize: 3.000 mm, širina mize: 1.500 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 150 mm, hitrost pozicioniranja: 140 m/min, natančnost pozicioniranja: 0,02 mm, leto zadnje generalne obnove: 2024, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.500 mm, dolžina podajanja os Z: 150 mm, Oprema: dokumentacija / priročnik, hladilna enota, varnostna svetlobna zapora, Laser je v obratovanju, možen ogled in preizkus. Redno servisiran, v dobrem tehničnem stanju. Vsa ogledala so bila popolnoma zamenjana leta 2024. Duodpjv Hxbbsfx Altsw

Leto izdelave: 2009, stanje: dober (rabljeno), številka stroja/vozila: 120P1109, OFFER 21407 Motorized Vessel/Drum Rotator with Rail-Mounted Carriage Technical Specifications: - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per vessel rotator: 20,000 kg - Workpiece diameter approx.: 500 – 3,500 mm - Support roller center distance adjustable via trapezoidal-thread spindle - Roller diameter: 500 mm - Roller width: 150 mm - Powered unit with dual-side drive - Infinitely variable rotation speed - Handheld remote for forward and reverse operation - Drive: 400 V - Both units mounted on rail carriages - Required space for powered unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Required space for idler unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight powered unit: approx. 2,500 kg Dujdshcnhmepfx Altjw - Weight idler unit: approx. 1,800 kg

Stanje: novo, Load capacity in kg: 1000 kg Reach: 4000 mm Height: 3000 mm (underside of jib) Total column height: 3790 mm Slewing range: 270 degrees Total weight: approx. 525 kg Description: - Festoon cable power supply for trolley - Drag chain, cable sag approx. 800 mm - Operation from floor using pendant control Djdoxak Hxepfx Altouw Including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, double-strand - Painted in RAL 5017 traffic blue - Lifting capacity 1 t - Hook travel 3000 mm - Maximum hook position 2442 mm - Design basis FEM 9.901 - Mechanism group 2m / M5 - Lifting, 2-speed (pole-switchable) 1.3 / 5 m/min - Lifting power 0.22 / 0.9 kW - Duty cycle 60% ED - Switching frequency 360 c/h Overload protection The crane system complies with the requirements of Machinery Directive 2006/42/EC as well as current UVV regulations DGUV Regulation 52 (formerly BGV D6). Included: - Anchor rods L200 (set) size LS 200 - Consisting of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - For foundation anchoring, including grouting accessories For alignment of the slewing jib crane, a mounting gap between the column base and the building floor must be provided. The mounting gap is to be grouted by the customer after approx. 4 weeks of crane operation. Illustration shows a similar crane system.

Stanje: novo, številka stroja/vozila: 1, lastna masa: 11.000 kg, največja dovoljena obremenitev: 28.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 870 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17.5, barva: temno rdeča, Leto izdelave: 2020, Oprema: ABS, New Ceylan low-loader trailer, ready for registration. 3 axles, with first axle liftable and third axle steering. Equipped with EBS, full-width double hydraulic ramps, widening devices, winch preparation, loading deck height 87 cm, loading area length 9.95 m, total length 13.65 m. RUD lashing points. Immediate delivery subject to prior sale. Warranty included. Dealer: INTERDRIVE SRL - PARMA. Djdpfx Aeh S Aw Reltjuw