Škropilna kabina 8,125 x 4,65 m

ABC-Group

Stanje: novo, Leto izdelave: 2026, The illustrative photos show examples of projects for the customer utilizing the 4x7 booth. The offer applies only to the spray booth without a preparation area (possibility to purchase a preparation zone on request). - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm - Entrance door: 3000x2600 mm (triple-leaf) - Service door: 640x1800 mm - Frame: stainless steel - Heat exchanger: stainless steel - Panels: mineral wool insulated - Total power: 16 kW - Fully grated floor Iasdpfxjr Ha Ehe Abxsu - Air supply system: jet turbine 4.0 kW - 2 units - Exhaust system: power turbine 5.5 kW – 1 unit - Ceiling lights: cassette units with 32 LED fluorescent lamps - Side lighting: LED panels 120x30cm - 8 units Output: 48 W – each 1000 lumens - Burner: Riello 40 G20 95-213 kW - The booth is available in various colors

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, We are offering a top-quality 3D scanner from GOM: GOM ATOS IIe Rev.01 Complete, ready-to-connect system including all cables. Please note: The PC has a password set, but the software is included on CD. Iedpow E I Itjfx Abxjau Includes various sensor heads: Measuring volumes: - Set 175x140 - Set 350x280 - Set 550x - Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready for operation with GOM ATOS IIe Software included on CD, steel scale bars with ATOS evaluation dongle Spare lamp Calibration panel (aluminium) CP20/MV 350x280mm²

Stanje: novo, Leto izdelave: 2026, - External dimensions: 7200x5200x3800 mm - Internal dimensions: 7100x5100x3100 mm Iaedsm Tv I Aepfx Abxsu - Entrance gate: 4000x3100 mm (four-winged) - Service door: 640x1800 mm - Construction: stainless steel - Heat exchanger: stainless steel - Panels: filled with mineral wool - Total power: 21 kW - Seating: inside/outside (can be installed after the cabin is roofed by the customer) - Floor: fully sanded - Air supply system: jet turbine 5.5 kW – 2 pcs - Exhaust system: jet turbine 7.5 kW – 1 pc - Ceiling lights: cassettes with LED fluorescent lamps, 32 pcs - Side lights: LED panel 120x30 cm – 12 pcs Output: 48 W – single piece 1000 lumens - Burner: Riello RG5S 160-310 kW - The cabin is available in various colors

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Detailed specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove design; 0.5 mm steel sheet with mineral wool core - Chamber: Panels 100 mm thick, insulated with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating capacity: 200,000 kcal/h, 1 set in total - Roof: Panels 100 mm thick, insulated with mineral wool - Control system: Heating control, timer setting, fault indicator, emergency stop switch, hour meter, temperature limit controller, total runtime display - Total power: 6 kW - Overhead transport system: 4 rails; maximum load 400 kg per rail We manufacture ovens in any dimensions. We provide complete systems with transport beams, spray walls, and powder coating guns – see visualisations in the photos. Iodpfx Aoxna U Usbxjau

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 280 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 470 mm, višina središča: 235 mm, stružna dolžina: 1.000 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.150 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.800 kg, nosilec puše: MK 4, Centre height: 235 mm Centre distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Equipment includes, among others: Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surfaces) of the carriage and cross slide Manual central lubrication with a pump for the longitudinal and cross slides Complete coolant system with rear splash guard and carriage splash protection Iajdpfx Abscirniexju Chuck guard Control rod with 3 adjustable cams Machine lamp Fixed centre Set of machine mounting plates

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna višina: 5.850 mm, skupna dolžina: 12.125 mm, skupna širina: 5.150 mm, skupna masa: 8.000 kg, trajanje garancije: 12 meseci, notranja višina: 5.000 mm, notranja dolžina: 12.000 mm, notranja širina: 5.000 mm, Oprema: kabina, osvetlitev, PAINT SPRAY BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: - 2x supply air fans - 2x exhaust air fans TECHNICAL SPECIFICATIONS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance gates: 4000x4800 mm (2 units, four-winged, with reinforced hinges) - Additionally, a BOX measuring 1650 mm x 8000 mm must be taken into account – can be positioned on the right or left side. - Construction: galvanized steel frame structure - Heat exchanger: high-quality stainless steel - Panels: filled with mineral wool - Drive-on ramps – 2 units - Fully grated floor The reinforced frame structure prevents vibrations and the air surge effect from the main supply air duct. Double-layered roof design: - Outer top layer - Inner truss construction with V600 ceiling filter Air circulation system: - Supply air system: jet turbine 7.5 kW – 2 units - Exhaust air system: jet turbine 7.5 kW – 2 units Air filter system: - Pre-filter captures particles >10 μm - Ceiling filter captures particles >5 μm - Floor filter: Paint Stop - Activated carbon filter Lighting: - Ceiling lighting: 52 LED fluorescent tubes (14 slanted fixtures, each with 4 tubes) - Side lighting: 26 LED panels integrated in the right, left, and rear walls Burner: Riello – 2 units, Oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel Iasdpfxoxm U Exe Abxou - Heating-up time: 8–15 min. (max. 80°C) Optional equipment: - Boxes on the booth roof - Insulated roof - Pass-through doors - Water wall - Paint finish according to RAL color chart - EX version (explosion-proof) available

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Iajdpfx Abowvqklexeu Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: novo, Leto izdelave: 2026, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 1.200 mm, 5-axis machining center in gantry design with a powerful motor spindle. EDEL CYPORT - CP 4030 Travel X/Y/Z: 4,000 / 3,000 / 1,200 mm Portal clearance Y/Z: 3,276 / 1,405 mm Rapid traverse X/Y/Z: 30/30/30 m/min 2-axis NC machining head M-Series (CYTEC): Swivel range A-axis: +/-110° Swivel range C-axis: +/-360° Powerful CYTEC milling spindle: Tool interface: HSK-A100 Speed: 12,000 rpm Power: 42/53 kW (100%/40% duty cycle) Torque: 200/253 Nm (100%/40% duty cycle) Control: HEIDENHAIN TNC 7 HEIDENHAIN wireless handheld control with charging station DXF converter CAD viewer KinematicsOPT with tool kit Remote maintenance Increased energy efficiency (certificate) Tool magazine: Number of slots: 64 HSK-A100 Max. tool diameter: 105/150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Coolant system Manufacturer: KNOLL Tank capacity: 1,600 L External coolant supply: 20 bar Internal coolant supply: 50 bar Paper band filter, rinsing gun Chip conveyor Coolant-air blast switch Extraction system for oil and emulsion mist Workpiece measuring system BLUM TC 60, wireless Tool measurement: BLUM LaserControl Micro Single NT Machine enclosure Safety devices Documentation CE certification We also optionally offer financing through our leasing company. Iaedeir Iczspfx Abxsu CYPORT – Flexible, Powerful, Dynamic. Minimal footprint with maximum machining area. Made in Germany

Leto izdelave: 2009, stanje: dober (rabljeno), številka stroja/vozila: 120P1109, OFFER 21407 Motorized Vessel/Drum Rotator with Rail-Mounted Carriage Technical Specifications: - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per vessel rotator: 20,000 kg - Workpiece diameter approx.: 500 – 3,500 mm - Support roller center distance adjustable via trapezoidal-thread spindle - Roller diameter: 500 mm - Roller width: 150 mm - Powered unit with dual-side drive - Infinitely variable rotation speed - Handheld remote for forward and reverse operation - Drive: 400 V - Both units mounted on rail carriages - Required space for powered unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Required space for idler unit: approx. W 3,600 x H 1,150 x D 1,350 mm Iodpfx Aohcnhmsbxsau - Weight powered unit: approx. 2,500 kg - Weight idler unit: approx. 1,800 kg

Stanje: novo, The Jantar is, due to its dynamics and efficiency, the most popular model among Eckert machines. It is used by both large industrial companies and medium-sized enterprises seeking an economical yet reliable solution. The Jantar plasma cutting system can be equipped with both plasma and oxy-fuel cutting systems and can be fitted with extensive accessories (marking, drilling, and processing of pipes and profiles). The machine’s design has been optimized over the years for maximum reliability, which hundreds of customers across Europe can confirm. Main Features • Attractive price for a well-equipped base version • Highly dynamic and precise cutting of 2D applications, pipes and profiles • Cutting capacity from 0.5 mm up to 100 mm material thickness • Comprehensive database of predefined cutting parameters • Optionally expandable work area length Technical Data Drive: Servo AC Available working widths: 1,500, 2,000, 2,500, 3,000 mm Available working length: Any length starting from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 100 mm Iodpfx Absf Alb Aoxoau Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Repeatability: DIN-EN 28206 Electrical systems: DIN-EN 81346 Safety module: DIN-EN 13850 Working height: 740-760 mm Operating temperature: +5°C to 45°C Working humidity: max. 90%