Oerikon Böhringer Due 800 nakup rabljenega (11.531)

Stanje: rabljeno, Leto izdelave: 1978, Tlak 800 t Razmak između stupova 3010 mm Hod 300 mm Udaljenost stol/klizač, veliki hod gore, prilagodljivi gornji dio 1350 mm Ledpfxovuk Ipo Al Nohf Površina stola 3000 x 1800 mm Visina stola iznad poda 500 mm Bočni prolaz kroz okvir 1500 x 1400 mm Površina klizača 3000 x 1800 mm Brzina od 300 mm/s Kapacitet ulja 900 l Visina iznad poda 5,4 m Visina ispod poda 2,1 m Pogonska snaga 200,0 kW Težina 80,0 t Prostor za postavljanje (ŠxDxV) 5,2 x 2,6 x 7,5 m POSEBNA PONUDA hidraulična brza presa s elektro-hidrauličkim pogonom, upravljiva ovisno o tlaku/vremenu i putu, hidraulično prigušenje udara rezanja, mehanički graničnik dubine (motorno podešavajući), blokada klizača u gornjoj mrtvoj točki maksimalna frekvencija hoda 50/min (pri korištenju automatskih uređaja za dovod) stanje kao stoji i leži, BEZ puštanja u rad, demontirano i uskladišteno

Stanje: rabljeno, Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Pogon za posuv z brezstopenjsko regulacijo in motor za hitri pomik za rezkalni stroj MH 800P. Lhedpsyyap Sofx Al Nef

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Fully automatic flow pack machine for packaging products—regardless of their length—with complete wrapping and without film overlap. Product feeding is via a conveyor belt, with simultaneous wrapping in center-folded film over a forming shoulder. Product indexing is controlled by a photoelectric sensor. The infeed conveyor can be easily adjusted to accommodate different product widths. Longitudinal sealing is performed by a continuous side sealing unit. The height of the forming shoulder and sealing units can be manually adjusted. Wear parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is in full working order. Technical Data: - Cross sealing bar: 850 mm - Film: centre-folded film, approx. 12–80 µm - Max. film roll outer diameter: 400 mm - Max. film roll width: 900 mm - Min. product length: 120 mm - Passage height: 300 mm - Working height: 780–930 mm - Power supply: 400 Volt three-phase, 50 Hz with protective earth - Rated power: 3.5 kVA - Rated current: 5.1 A Inspection and demonstrations are possible by appointment at our premises. Lhjdpfx Aljyybuij Njf Functional guarantee, no warranty.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Proizvajalec: "Alpina" Mlin za drobljenje, primeren za sekundarno drobljenje. Pogon: 15 kW Popolnoma delujoč, z upravljanjem. - Opcijsko z ventilatorjem in odsesavanjem v ciklon. Ustrezni transportni trak na zalogi. Lsdstw Sf Sjpfx Al Nshf Preizkus stroja je možen po dogovoru.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 53.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 206432, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, razmak između stupova: 570 mm, delovna prostornina: 392 cm³, tlak vbrizgavanja: 2.000 letvica, hod izmetalca: 225 mm, skupna masa: 7.450 kg, Oprema: dokumentacija / priročnik, Here we are offering, as an injection moulding machine dealer, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current Note – Tax Information and Advantages for Used Machines: From 01.07.2025, used machines can additionally benefit from a special depreciation allowance of 30% per year for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial Number: 206432 Year of construction: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Fully functional Condition: Very well maintained – German origin Extras: - Complete thermoplastic cylinder, 50 mm, highly wear-resistant - Screw in HC-design instead of standard - Selogica direct control system - Hydraulic unit with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip extended 50 mm - Band heater for open nozzle - Band heater for extended nozzle tip - Central clamping platen set 570, Ø 125 mm - 2 ejector air blow-off units with pressure regulator - Connection for air blow-off unit 1 - Selector unit connection - Core puller 1 for serial movement, holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (to EUROMAP 67), 50-pin - Host computer interface ARBURG - Additional power connections: 1 CEE, 1 Schuko - Serial printer interface USB - CompactFlash interface for data storage - Operation authorization via chip card according to EUROMAP 65 - 1 additional heating circuit for nozzle or adapter with socket - Interface for dosing/coloring unit - Free manual cooling circuits - Machine-related cooling circuits regulated - Equipment package: Advanced Monitoring - Equipment package: Extended Movements - Equipment package: Production Control - Equipment package: Optimization/Operator Assistance - Equipment package: Quality Assurance - Equipment package: Documentation Complete documentation included Injection Unit: - Screw diameter: 50 mm - Shot weight: 359 g/PS - Injection pressure: 2000 bar - Shot volume: 392 ccm Clamping Unit: - Clamping force: 200 t / 2000 kN - Tie bar distance: 570 x 570 mm - Mounting platens: 795 x 795 mm - Mold height: 300 mm - Max. platen distance: 950 mm - Opening stroke: 650 mm - Ejector stroke/force: 225 mm / 66 kN Lhodpfx Alow Tt R Ie Nef - Hydraulic clamping unit Motor output: 22 kW Heating capacity: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is immediately available at our warehouse in Hanover, Germany and has been tested. Warranty: Warranty is valid until initial commissioning. Loading/Shipping: Loaded free onto buyer’s truck or delivered free to buyer’s premises (shipping charges apply) Available from our warehouse in Hanover, Germany Information about our offered machines and our company: - We only sell our own machines, acquired from ongoing production, from our Hanover warehouse - All machines offered are tested and checked prior to dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property - All machines offered come from successful companies where maintenance and servicing are standard practice - All offered machines are available for inspection at our warehouse

Stanje: dober (rabljeno), Koda: 0285 Znamka: CENTAURO Model: CO 800 - CE standard Tračna žaga za rezanje lesa, plastike in aluminija - CE standard Tehnični podatki: Premer litoželeznega vztrajnika: 800 mm Maksimalna višina reza: 500 mm Višina mize od tal: 960 mm Dimenzije mize: 1170 x 800 mm Maksimalna dolžina tračnega lista: 5670 mm Motor: 5,5 KM Nagibna delovna miza Teleskopski ščitnik tračne žage 2 sesalna priključka premera 120 mm Ljdpfeyxmqgjx Al Nshf Skupne dimenzije: 1625 x 940 x 2500 mm (v) Teža: 630 kg

Stanje: dober (rabljeno), Koda: 0347 Znamka: CENTAURO Model: CO 800 - CE standard Tračna žaga s pokritim kolesom za rezanje lesnih materialov, mizarstva, pohištva, opreme, okenskih okvirjev, plastike, aluminija, kompozitnih in različnih drugih materialov – CE standard Lhsdpfx Aloyxmm Io Nef Tehnični podatki: Premer vztrajnika iz litega železa: 800 mm Maksimalna višina reza: 520 mm Višina mize od tal: 960 mm Dimenzije mize: 1170 x 800 mm Največja dolžina rezila: 5670 mm Motor: 5,5 KM Nagibna delovna miza Teleskopski ščitnik rezila 2 priključka za odsesavanje s premerom 120 mm Skupne dimenzije: 1550 x 850 x 2500 mm (v) Teža: 630 kg

Stanje: dober (rabljeno), Lopata za viličarja, hidravlična lopata za viličarja, lopata za lahek material, preklopna lopata, naprava za preklop zabojnikov, vilice za viličarja, vilice, vilinski zobje - Vilice za viličarja: 2 kosa/1 par Lhodpfx Alstvb D Uj Nsf - Dolžina: 900 mm - Pozor: stanje preverite na fotografijah - Prečni prerez: 100 x 40 mm - Priklop: 400 mm (glejte skico na fotografijah) - Transportne dimenzije: 1020/565/V100 mm - Teža: 98 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.200 mm, skupna širina: 800 mm, skupna višina: 1.900 mm, We are offering used roll containers for sale here. TECHNICAL DATA Height: 1,900 mm Width: 1,200 mm Depth: 800 mm 2 push handles 2 swivel castors and 2 fixed castors with parking brake with handle with drawbar equipped with side step assembled Condition: used PRICE €140.00 net each €166.60 gross each incl. VAT Available quantity: 107 units Tiered pricing per unit 1 - 5 units: €140.00 net 6 - 10 units: €133.00 net 11 - 25 units: €126.70 net 26 - 50 units: €121.00 net from 51 units: €115.80 net YOUR CONTACT PERSONS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The additional costs depend on the place of delivery and the scope of the shipment and can be requested on an individual basis. PROJECT PLANNING Lhodpfx Alsy Epu So Nof Our sales team will gladly provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is quoted as a unit price/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, located in Nordhorn, trades in new and used products from the areas of warehouse logistics, conveyor systems, mezzanine floors, textile storage as well as machines for trade, industry, and crafts. We continuously offer attractive second-hand deals from a variety of manufacturers/brands at competitive conditions. Please feel free to contact us if you have any questions. Four wins – The four pillars of DLK’s success – Warehouse Technology | Levelmaker® | Logistics | Solutions

Stanje: rabljeno, Motor 4,0 kW Premer valja: 800 mm Maksimalna višina reza: 440 mm Maksimalna širina reza: 785 mm Višina mize: 970 mm Dimenzije mize: 1170 x 800 mm Širina rezila: 40 x 7/10 mm Dolžina rezila: 5630 mm Premer odprtine za odsesavanje: 120 mm Dimenzije: 1625 x 940 x 2516 mm Teža: 650 kg Lokacija skladišča: Nattheim Lsdpowayzbsfx Al Njhf

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 800 kN, À vendre : une presse à injection de marque Arburg, type 370 C 800-100. Caractéristiques techniques : Année de fabrication : 2007 Groupe d'injection malheureusement non disponible Force de fermeture : 800 kN Distance entre colonnes : 370 x 370 mm Ouverture maximale des plateaux : 750 mm Hauteur d'outil mini : 250 mm Unité d'injection : 100 Sur demande, transport et chargement peuvent être organisés en supplément, partout en Europe. Prix hors TVA. Visite possible sur rendez-vous. Contactez-nous, notre équipe se fera un plaisir de vous aider. Reprise ou échange possible ! Achat / Vente de machines ACHAT / VENTE DE MACHINES DE PRODUCTION & D’USINAGE DES MÉTAUX, ETC. Vous cherchez une machine d’usinage des métaux de qualité à prix avantageux pour votre production ? Ou vous souhaitez vendre la vôtre ? Pour plus d'informations ou pour nous contacter, consultez notre site web. Lodpfoyxqiyox Al Nehf

Leto izdelave: 2017, stanje: zelo dobro (rabljeno), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION (“BOOK ON DEMAND”) AND SHORT RUNS TECNAU LIBRA 800 Intended use: Suitable for imposition and processing of short print runs and single books (“books of one”) with varying sizes, page counts, and covers. Productivity: from print run of 1; up to 800 copies per hour Book format: min.: 100 x 125 mm / max.: A4 Thickness: min.: 2 mm / max.: 60 mm Equipment / additional information: Line configuration: 1. Roll feed: unwinder, merger, Dupla cutting machine, and book assembly station for the production of book blocks with 2-up printing 2. Sheet feeder: A variable number of loose sheets can be inserted into the book block as inserts. The sheets must be the same size and print run as the book block to be processed. 3. Feed to binding machine: Station for manual feed of pre-assembled book blocks, transfer with document scanning station, book turning module, and loading robot at the binding machine 4. Variable binding machine for production of softcover books. The binding machine is equipped with PUR glue on the spine and hot-melt adhesive on the sides of the book. 5. Softcover cover machine, configured with sheet cover feeder: already printed cover sheets are fed in, trimmed at the front, side-trimmed, and creased to the correct size to match the thickness of the associated book block. 6. Cooling tower/cooling spiral (product-specific) not included in scope of delivery; can be ordered depending on customer requirements (product type). The cooling conveyor can be configured according to space requirements and installation conditions. Price of conveyor depends on configuration. We will be happy to advise you on selecting the suitable conveyor. 7. Variable three-knife trimmer for trimming books with three-dimensionally variable formats and different cover types. 8. Line control software Finishing line The entire process is managed via 2D data matrix codes. Through the code, the system receives release for the following automatic setups and workflow controls: • Information on book dimensions and inserts (quantity and sequence) • Setup of the binding machine (spine position, thickness, and length) • Cover preparation: softcover → creasing, cutting, edge trimming • Correct cover-to-book matching Lhedpfx Aloylyhds Nsf • Three-knife trimmer (knife positioning is automatically set according to book size) Very good condition // Disassembly, machine packaging, and securing (insurance for transport of the machine) will be carried out by the manufacturer / Tecnau.

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Tehnične podrobnosti Premer obdelovanca: 1000 mm Teža obdelovanca: - kg Višina obdelovanca: - mm Krmiljenje: Motor brusilnega vretena: 11 kW Skupna potrebna moč: 25 kW Teža stroja pribl.: 6500 kg Prostorske zahteve pribl.: 4100 x 3200 x 2600 mm Dodatne informacije Stroj prihaja iz zaprtja obrata Oprema: Hladilna naprava 500 litrov s papirnatim trakovnim filtrom 4 brusna koluta (3 neuporabljeni) Lhodey Auq Njpfx Al Njf Tehnični podatki: Premer vrtljive mize: 800 mm Maks. razdalja vrtljive mize do sredine brusilnega vretena: 850 mm Premer brusnega koluta: 400 mm Širina brusnega koluta: 80 mm

Stanje: dober (rabljeno), Pritrdilna plošča, risalna plošča, merilna plošča, merilna miza, varilna miza, izravnalna plošča, risalna miza - Pritrdilna plošča: z opornimi rebri, na masivnem podnožju - Površina za pritrditev: 800 x 800 mm - Višina mize: 930 mm - Debelina plošče: 25 mm - Transportne mere: 800/800/V930 mm Lhsdpfx Aswclciol Nof - Teža: 235 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, OPS INGERSOLL GANTRY EAGLE 800 Année de fabrication : 2022 État excellent, très peu d'heures de fonctionnement Commande EAGLE Powertec PC/NC 3060 Écran 22" avec commande tactile Programmation technologique MultiProg Powertec sur PC/NC Programmation rapide Powertec Easy Burn Powertec Handheld, unité de commande portative multifonction Érosion manuelle avec Powertec Handheld EAGLE Powertec - Générateur de finition fine PT 60, 60 ampères (60 ampères de courant de pointe) High Speed Jump max. 18 000 mm/min Courses (X, Y, Z) : 550 x 850 x 450 mm Système de mesure linéaire sur tous les axes Distance table / porte-électrode : min. 135 mm / max. 585 mm Changeur d'électrodes à 20 positions, magasin à disque pick-up Lhedpfxsyzxd Dj Al Njf Cuve de travail (L x P x H) : 800 x 1 100 x 480 mm Table de travail (L x P) : 760 x 1 000 mm Capacité de charge : 2 000 kg Charge sur la tête : 200 kg Dimensions machine (L x P x H) : 1 436 x 2 940 x 2 730 mm Système de filtration à cartouches intégré Accessoires : Erowa, type UPC Production Chuck Système d'extinction à CO2 Refroidisseur

Stanje: rabljeno, Leto izdelave: 1977, Skupna stiskalna sila: 800 t Hod bata: 700 mm Ljdsyxmulepfx Al Nshf Nastavitev bata: 600 mm Vgradna višina (hod spodaj, nastavitev zgoraj): 1500 mm Razdalja med stebri L-D: 3800 mm Bočna razdalja med stebri: 1450 x 1100 mm Pritrdilna površina mize ca.: 3500 x 1900 mm Pritrdilna površina bata ca.: 3500 x 1900 mm Sila izvlečne blazine v mizi: 150 t Hod izvlečne blazine: 250 mm Površina izvlečne blazine: 2780 x 1570 mm Število hodov na minuto: 7 - 18 min-1 Potrebna moč: 120 kW Višina nad tlemi ca.: 9510 mm Teža stroja ca.: 260 t Standardna oprema Hidravlična zaščita pred preobremenitvijo 2 cilindra izvlečne blazine

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 8.344 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, delovna prostornina: 392 cm³, Tehnični podatki zapiralne strani Zapiralna sila: 2000 kN Velikost plošče (š x v): 1772 x 800 mm Minimalna vgradna višina: 400 mm Maksimalni razmak plošč: 900 mm Odpiralna pot: 500 mm Premer rotacijske mize: 2000 mm Izmetalni hod: 175 mm Izmetalna sila: 45 kN Teža orodja: 6000 kg Tehnični podatki brizgalne strani Premer polža: 50 mm Volumen hoda: 392 ccm Brizgalni tlak: 2000 bar Dolžina polža: 20 L/D Hod polža: 200 mm Število obratov polža: 60 min⁻¹ Navor polža: 880 Nm Število grelnih con: 8 Hod šobe: 400 mm Dimenzije in teža Lsdpfoy Ak Nuex Al Nehf Dimenzije stroja (D x Š x V): 4,11 m x 2,65 m x 4,81 m Skupna teža: 22.000 kg Oprema Prikaz besedila na zaslonu v nemščini Prikaz besedila na zaslonu v angleščini CEE-vtičnica 16A Hidravlični vlečni zatič za jedro 4x Zračni ventil 1x Stroj z vodnim sistemom Stroj brez materialnega lijaka Izravnalni elementi Vmesnik EUROMAP 67 za manipulacijo Vmesnik EUROMAP 73 OPC vmesnik

Stanje: zelo dobro (rabljeno), Catalogue Number 7641 TECHNICAL SPECIFICATION - Max. planing width: 800 mm - Max. planing height: 200 mm From above: - Powered, toothed infeed roller - Pawls - Pressure unit - 2 powered, toothed feed rollers - Pressure unit - 800 mm, 4-knife planing shaft – 7.5 kW - Pressure units - 800 mm, 4-knife profiling shaft (equipped with 3 straight knives, 1 profiling knife) - Pressure unit - Smooth, powered outfeed roller From below: - Guide rail - Infeed table - Smooth feed roller - 800 mm, 4-knife planing shaft – 7.5 kW - 2 smooth feed rollers - Split, smooth sliding roller - Lateral pressure at outfeed From the rear: Lsdpjyqt Iuofx Al Nshf 2 side spindles + pressure units: 1) Right vertical 90 mm, 4 kW 2) Left vertical 90 mm, 4 kW - Spindle diameter: 35 mm - Spindles are alternately positioned - Spindles adjustable up/down, right/left 3) Additional lower horizontal spindle 350 mm, adjustable up/down + right/left – 5.5 kW - Spindle diameter: 40 mm At outfeed: 4 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction port diameters: 3 × 180 mm, 130 mm - Dimensions (L×W×H): 3100 × 2000 × 1900 mm - Weight: approx. 3500 kg ADVANTAGES – Top-performing wide planing machine for wet and dry wood – Perfect for beams, flooring, etc. – 3 planing shafts + 3 spindles – Made by KUPFERMUHLE – German manufacture – Used planer, in very good condition Net price: 64,900 PLN Net price: 15,450 EUR (based on 4.2 EUR rate) (Prices may vary depending on currency fluctuations)

Stanje: rabljeno, Leto izdelave: 1991, Tehnične podrobnosti: Premer struženja nad posteljo: 570 mm Premer struženja nad suportom: 365 mm Dolžina struženja: 2000 mm Pomik na obrat: 0,06 - / 0,03 - 28 mm Vrtljaji vretena: 11,2 - 2240 vrt/min Premer vretena: 62 mm Vretenasta glava: 8 po DIN 55022 Skupna potrebna moč: 15 kW Približna teža stroja: 4,8 t Približne dimenzije (DxŠxV): 4,5 x 1,5 x 1,4 m Z digitalnim prikazovalnikom HEIDENHAIN Hitri pomik, jekleni nosilec MULTIFIX Fiksna luneta do Ø 160 mm Trivpenjalna glava RÖHM TR 250 Hladilni sistem Različni nosilci orodij, različne čeljusti Lhedpjx D Ufmsfx Al Nof

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning ready for immediate use – just plug in and switch on clean combustion – no chimney required very economical – fuel consumption approx. 4 l per day app-controlled – set temperature, receive messages and monitor fuel level directly on your smartphone thermostat for automatic operation, adjustable range 0–40°C dry heat – no condensation like with gas mobile usage thanks to four swivel castors operated with biodiesel or diesel/red diesel low noise – only 48 dB no dust – no fan no exhaust fumes – no combustion odor emitted Lsdpfsqvlvmex Al Nohf complies with the new EU emissions directive automatic restart after power failure

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 8208124, poteza s peresom: 100 mm, model krmilnika: INDEX S3T B, premer vretena: 103 mm, premer puše konjička: 100 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe zavezuje k pravočasnemu prevzemu med 08.04.26 in 16.04.26! TEHNIČNI PODATKI Premer delovnega vretena: 103 mm Premer pinole konjička: 100 mm Hod pinole: 100 mm Število mest v revolverju: 16 Revolverska glava: EFG 250 PODATKI O STROJU Krmilje: INDEX S3T B Lhedpfxjyk E Sxj Al Nef Obratovalna napetost: 380 V Frekvenca: 50 Hz Krmilna napetost: 220 V Nazivni tok: 100 A Dimenzije & teža D x Š x V: 3500 x 2400 x 2600 mm Teža stroja: 3 t Zunanja referenca: 6

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 45 kW (61,18 KM), vrsta goriva: dizel, barva: oranžna, skupna masa: 6.820 kg, lastna masa: 6.100 kg, Leto izdelave: 2012, obratovalne ure: 5.100 h, Vögele Super 800 Leto izdelave: 2012 Lodpfeyym Ibsx Al Nehf 5.100 h Deutz motor 45 kW 6.100 kg Polagalna širina: 200 cm Razširitve: 2 x 60 cm do 320 cm Nivelliranje

Stanje: novo, Technical Specification: • Chamber volume: 990 liters • Power supply: 230V ~ / 50Hz Lhodpfx Aoft Srcel Nef • Rated operating pressure: up to 10 bar • Cleaning performance: up to 15 m²/h • Cleaning grade: SA-2.0 (deep and extensive corrosion) • Air requirement: 3,500 l/min (for 4.0 mm nozzle) • Maximum air flow: up to 12,500 l/min • Supported nozzle diameters: from 4 to 10 mm • Abrasive valve: Vacuum-BRAGO • Gun: Vacuum-CTR • Working area dimensions: 1,600 x 870 x 730 mm • Viewing window size: 305 x 610 mm • Work table load capacity: up to 250 kg • Lighting: LED, adjustable within +/- 90 degrees (two units) • Coating protection: powder-coated • Working temperature: 10 to +50 degrees Celsius • Inspection valve: Yes • The image shows an example of the SCI-800-10 FA configuration The offer includes: • Land Reko SCI-800-10 FA automated chamber cleaner • Boron carbide nozzles, 8 pieces, size selectable between 4 mm and 10 mm • Pneumatic connectors • Control panel with inverter system • Roller conveyor with automatic drive 1.5 lm x 2 • Working pressure control system for spray sections • Automatic sprinkler and abrasive valve x 8 • Workpiece blow-off system after processing • CE Declaration of Conformity • User manual in German • 24-month warranty for consumers • 24-month warranty for businesses • Free delivery • Also available for lease or financing • Made to order. Delivery time 8 weeks from order

Stanje: novo, Technical Specification: • Chamber volume: 990 liters • Power supply: 230V ~ / 50Hz • Nominal operating pressure: up to 10 bar • Cleaning performance: up to 15 m²/h • Cleaning grade: SA-2.0 (deep and extensive corrosion) • Air consumption: 500 l/min (with 4.0 mm nozzle) • Maximum air flow: up to 1,500 l/min • Supported nozzle diameters: from 4 to 10 mm • Grinding valve: Vacuum BRAGO • Gun: Vacuum CTR • Working area dimensions: 1,600 x 870 x 730 mm • Viewing glass dimensions: 305 x 610 mm • Work table load capacity: up to 250 kg • Lighting: LED, adjustable within a range of +/- 90 degrees (two segments) • Surface protection: powder coating • Operating temperature: 10 to +50 degrees Celsius • Inspection valve: Yes • The picture shows an example configuration of the SCI-800-10 SA The offer includes: • Land Reko SCI-800-10 SA Semi-automatic Chamber Cleaner • Boron carbide nozzles: 8 pieces, selectable between 4 mm and 10 mm • Pneumatic connections • Working pressure control system for sprinkler sections • Hand-operated roller conveyor 1.5 lm x 2 • Automatic sprinkler and grinding valve x 8 • Workpiece blowing system after processing • CE declaration of conformity • User manual in German • 24-month warranty for consumers • 24-month warranty for businesses • Free delivery Lhedpfx Aleft Sq Ho Nof • The equipment is also available via leasing or financing • Device available on order. Delivery time is 8 weeks from order placement.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Stihl FM 14, delovna višina: 14.000 mm, Ponujamo to skoraj novo medetažo Nedcon: Nedcon Medetaža 3 x 800 m² + viličar 14, letnik 2010. Proizvajalec: Nedcon Model: Medetaža Letnik: 2010 Tehnično stanje: kot novo Za vprašanja ali dodatne informacije nas prosim kontaktirajte preko sporočila ali po telefonu. Lsdpfx Aljyz Uz Sj Njhf