Potopna elektroerozijska naprava (EDM)

OPS Ingersoll Gantry EAGLE 800

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Completely Refurbished OPS Ingersoll Gantry 800 Eagle Die-Sinking EDM Machine – Technically and Visually in Excellent Condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent technical and optical condition. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts, including ball bearings and drive spindles, were carefully inspected and replaced as needed. A complete geometric measurement, alignment, and additional inspection using a laser measuring system were subsequently performed. The machine bed and entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic lines, were completely replaced. Dsdpoyr I Aisfx Af Sour Additionally, the machine received a complete new paint job and is visually in very well-maintained condition. The generator and control system were cleaned and technically inspected. The generator's climate unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and inspection standards. The machine is immediately ready for operation and ideally suited for reliable production use. Technical data: - Ingersoll (OPS Ingersoll) - Die-sinking EDM machine - OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn quick programming - Powertec Handheld – multifunctional handheld controller - Manual EDM operation with Powertec Handheld - High Speed Jump: max. 18 m/min - Generator output: 60 ampere, EAGLE Powertec - Travel distances (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up disk changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Worktable (W x D): 760 x 1000 mm - Table load capacity: 2,000 kg Accessories: - CO2 fire extinguishing system - Integrated cartridge filter system Special equipment: - Linear measuring system on all axes (Z standard for the series)

Leto izdelave: 2022, stanje: skoraj kot novo (rabljeno), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 COOLING SYSTEM GMP150+2xPTUN2000 As new, unused The PTUN... module is a single drying unit for plastic material. The machine consists of the following components: Dsdovhb S Sjpfx Af Sjur • Hopper. • Support frame. • Heating chamber. • Connection lines. • Air control valves.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, potovalna razdalja osi X: 550 mm, pomik osi Y: 850 mm, pomik po osi Z: 450 mm, teža obdelovanca (maks.): 2.000 kg, širina mize: 760 mm, tabela razdalje do vretena: 585 mm, dolžina mize: 1.000 mm, dolžina obdelovanca (maks.): 1.095 mm, širina obdelovanca (maks.): 795 mm, višina obdelovanca (maks.): 480 mm, skupna masa: 6.800 kg, leto zadnje generalne obnove: 2025, obremenitev mize: 2.000 kg, hitri pomik na osi Z: 18 m/min, Oprema: dokumentacija / priročnik, OPS INGERSOLL GANTRY EAGLE 800 Refurbished Year of manufacture: 2013 EAGLE Powertec PC/NC control 3060 22" touchscreen monitor MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control device Manual EDM processing with Powertec Handheld EAGLE Powertec fine finishing generator PT 60, 60 amps High Speed Jump max. 18,000 mm/min. Travel paths (X, Y, Z): 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Head load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Dodpfx Aoyrqprsf Ssur CO2 fire extinguishing system Electrode clamping system EROWA ITS, Hirschmann, or System 3R (customer choice) ECOTEC energy-saving function standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Completely Refurbished OPS Ingersoll Gantry 800 Eagle Die-Sinking EDM Machine – Technically and Visually in Excellent Condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent technical and optical condition. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts, including ball bearings and drive spindles, were carefully inspected and replaced as needed. A complete geometric measurement, alignment, and additional inspection using a laser measuring system were subsequently performed. The machine bed and entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic lines, were completely replaced. Additionally, the machine received a complete new paint job and is visually in very well-maintained condition. The generator and control system were cleaned and technically inspected. The generator's climate unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and inspection standards. The machine is immediately ready for operation and ideally suited for reliable production use. Dsdpfx Afeykn Ngs Sjur Technical data: - Ingersoll (OPS Ingersoll) - Die-sinking EDM machine - OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn quick programming - Powertec Handheld – multifunctional handheld controller - Manual EDM operation with Powertec Handheld - High Speed Jump: max. 18 m/min - Generator output: 60 ampere, EAGLE Powertec - Travel distances (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up disk changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Worktable (W x D): 760 x 1000 mm - Table load capacity: 2,000 kg Accessories: - CO2 fire extinguishing system - Integrated cartridge filter system Special equipment: - Linear measuring system on all axes (Z standard for the series)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Specialized press designed from the ground up for briquetting iron, steel, and similar alloys. Features integrated oil drip mats. No packaging table included—only briquette guides (rails). Supplied as standard with transparent bunker doors and oil heating elements. The machines are operated via Siemens KTP-400 touchscreen panels. 2nd generation available for purchase from February 2024. For this press, please contact us first! Dujdpfx Afjtmugco Sor Technical specifications: Throughput: Up to 600 briquettes/hour* Main motor: 30 kW Feed motors: 2.6 kW Cooling system: 1.6 kW Total power: 34.2 kW Oil tank: 260 litres Filters: 4 Length: 2000 mm Width: 2000 mm Height: 2200 mm Weight: 3500 kg Briquette size: 40-110, D80 mm Warranty: 2 years / 2,000 operating hours

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, potovalna razdalja osi X: 550 mm, pomik osi Y: 850 mm, pomik po osi Z: 450 mm, teža obdelovanca (maks.): 2.000 kg, širina mize: 760 mm, tabela razdalje do vretena: 585 mm, dolžina mize: 1.000 mm, dolžina obdelovanca (maks.): 1.095 mm, širina obdelovanca (maks.): 795 mm, višina obdelovanca (maks.): 480 mm, skupna masa: 6.800 kg, leto zadnje generalne obnove: 2025, obremenitev mize: 2.000 kg, hitri pomik na osi Z: 18 m/min, Oprema: dokumentacija / priročnik, OPS INGERSOLL GANTRY EAGLE 800 Refurbished Year of manufacture: 2013 EAGLE Powertec PC/NC control 3060 22" touchscreen monitor MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control device Manual EDM processing with Powertec Handheld EAGLE Powertec fine finishing generator PT 60, 60 amps High Speed Jump max. 18,000 mm/min. Travel paths (X, Y, Z): 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Head load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Duedpjyi Uaijfx Af Sor Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS, Hirschmann, or System 3R (customer choice) ECOTEC energy-saving function standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, ops ingersoll gantry eagle 800 leto izdelave: 2011 ure: 1703 krmiljenje eagle powertec osi x, y, z: 550 x 850 x 450 mm pritrdilna plošča: 760 x 1000 mm maks. teža: 2000 kg erowa vpenjanje potopna delovna kad os c hladilnik protipožarna naprava daljinsko upravljanje menjalec elektrod za 20 kosov generator 60 amp vklj. dielektrik (+/- 700 litrov) vklj. tipalo vklj. tipalo na postelji vklj. magnet 400 x 200 mm vklj. omara s pripomočki dokumentacija stroj je pod napetostjo za pregled Dodpfx Afoxiwz Ue Sour

Stanje: novo, Leto izdelave: 2023, obratovalne ure: 50 h, Značka: Dr.Boy Model: 60E Rok výroby: 2023 Pracovní hodiny: 50 Průměr šneku: 32 mm Max. vstřikovací tlak: 2 142 bar Max. dávka: 100,5 cm3 Dujdpex Aphtjfx Af Sor Uzavírací síla: 60 t Max. vzdálenost mezi sloupy: 360 x 335 mm Min. výška formy: 250 mm Max. vzdálenost mezi deskami: 650 mm Rozměry: 3 450 x 1 150 x 1 950 mm Hmotnost: 2 250 kg Volitelné příslušenství: • Displej Procan ALPHA 4 • Hydraulické vyjímání jádra (2x) • Vzduchový ventil (2x) • Rozhraní balíček (vč. RS232/485, OPC-UA + licenční poplatek) • 4 volně programovatelné I/O • Rozhraní pro robota Euromap 67 • Rozhraní mezi bezpečnostním oplocením a strojem Euromap 78 • Kontakt pro dávkování barvy • Modul rychlé výměny formy – Chladicí okruhy (3x) na pevné a pohyblivé desce – Vodní rozdělovač 8násobný – Vypichovač s rychlospojkou – Otevřená tryska se závitovou špičkou • Energetická rozvodná skříň 6násobná (napájení druhým kabelem) – 3x 400V – 3x 220V • Plnění oleje (Econfluid, ISO-32)

Leto izdelave: 2001, stanje: dober (rabljeno), Used Mixaco Mixer CM 1000 for sale. The mixer was previously used in powder coating production. The machine is in good condition and ready for operation. Inertization of the mixer is possible! The mixer can be inspected at our warehouse in Arnsberg, Germany. Djdpfx Afofmh Uvs Ssur

Leto izdelave: 2021, stanje: rabljeno,