Karstens/Emag.weiss/Gp-Rundschleifmas... Cilindrični Brusilni Stroj nakup rabljenega (31.265)

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, višina središča: 100 mm, teža obdelovanca (maks.): 35 kg, dolžina brušenja: 500 mm, premer brušenja: 125 mm, skupna masa: 1.800 kg, vhodna napetost: 400 V, Naprodaj: 1 kos rabljeni brusilni stroj Proizvajalec: Knuth Werkzeugmaschinen GmbH Tip: RSM 500 Leto izdelave: 2006 Tehnični podatki: Višina konic: 100 mm Največji premer brušenja: 125 mm Razdalja med konicama: 520 mm Največja dolžina brušenja: 500 mm Največja teža obdelovanca: 35 kg Notranji premer brušenja: 10 - 40 mm Globina notranjega brušenja: 50 mm Rcodjxzrvwopfx Amfjf Vretenasti stožec: MK4 Konjiček: MK2 Teža: 1.800 kg Dokumentacija na voljo Stroj si lahko ogledate v našem skladišču v 09599 Freiberg.

Stanje: dober (rabljeno), Leto izdelave: 2013, Premer brusilnega diska: 390 mm Dolžina brušenja: 650 mm Višina med centri: 200 mm Nadzor: Siemens 840D Skupna potrebna moč: 46 kW Rodpfx Aow Inr Nemfocf Masa stroja: približno 6 t Potreben prostor: približno 3x3x2,4 m Univerzalno krožno brušenje – tip WUG21 (W27), dolžina brušenja 650 mm EMAG Weiss ponuja vrhunsko tehnologijo za univerzalno krožno brušenje med centri. EMAG Weiss ponuja primerno rešitev za skoraj vsakega uporabnika s CNC-krmiljenim strojem WUG 21. --> Tehnični podatki: --> Maksimalna dolžina brušenja: 650 mm --> Višina med centri: 200 mm --> Zunanji premer brusilnega diska: 1-390 mm --> Maksimalna teža obdelovanca v vrtišču MK4: 100 kg --> Maksimalna teža obdelovanca med centri: 250 kg --> Podajanje: --> Gib X-osi: 480 mm --> Gib Z-osi: 1.150 mm --> Vretenčna glava za obdelovance --> Pomnilni nastavek --> Vretenčna glava za brusilno vreteno --> Sistem za hlajenje, proizvajalec: HYFRA --> Trakasti filter, proizvajalec: Knoll, tip KF 200/1600 – letnik 2012 --> Filter za oljne hlape, proizvajalec: Cobaron Tukaj je nekaj dodatnih podatkov o stroju: - Dolžina brušenja / maks. dolžina obdelovanca: 650 mm - Maks. premer obdelovanca: 400 mm (višina med centri: 200 mm) - Vretenčna glava za obdelovance MK4, hitrost do 600 vrt/min, brezstopenjsko programirljiva - Hidravlični NC-pomnilni nastavek z 150 mm hoda, MK4 - 2x zunanje brusilno vreteno – 1x disk na levi, 1x disk na desni – B-os brezstopenjsko nastavljiva - Hitrost oboda brusilnega diska: 50 m/s - Motorji brusilnega vretena: 7,5 kW, pogon z zobatim jermenom - Dimenzije stroja (brez zunanje periferije): širina 4130 x globina 2400 x višina 2300 mm - Brez rotirajoče nastavke za CBN-brusilne diske, samo držalo za statično nastavitev

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Studer S40 1000/1600 Grinding length: 1,000 / 1,600 mm Centre height: 175 mm (optionally higher) Workpiece weight: 120 kg Additional configurable options: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus CNC - Fast setup via GSN operator interface - B-axis freely positionable - Second external grinding wheel - Internal grinding unit - Increased centre height - Dressing spindle for diamond form roll - Balancing and touch sensor systems - Tailstock hydraulic clamping / unclamping - Automatic Siemens door drive - 19" / 22" monitor - Remote maintenance - Conversion for needle nozzles - Matching coolant/extraction system - Automation preparation Rsdpfx Asfg S Uasmfocf - and much more We are also happy to overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and others.

Stanje: rabljeno, Leto izdelave: 2000, Schleifdurchmesser 300 mm Schleiflänge 1200 mm Werkstückdrehzahlen 6000 U/min max. Werkstückgewicht 70 kg Steuerung FANUC Umfangsgeschwindigkeit 140 m/sec Schleifscheibe Abmessung CBN 400 x 5 mm Spindelleistung 24 kW Maschinengewicht ca. 11 t Redpfx Ajy Dibxemfecf Quickpoint 5002/10 CNC-Außenrundschleifmaschine Bj.2000 - Regelmäßige Wartungen erfolgt - Dokumentation vorhanden Sonderzubehör: - KSS Anlage Junker novotecnic - Absauganlagen 2x LTA II R/H - Hyfra Rückkühler - 4 Schleifscheibenrohlinge - Ölwanne mit Gitterrost *Disclaimer: Alle Angaben sind unverbindlich und können unvollständig oder abweichend sein. Änderungen vorbehalten. Eine Haftung für die Richtigkeit oder Vollständigkeit wird ausgeschlossen. Die Offenlegung oder Weitergabe der von uns bereitgestellten Daten ist ohne unsere ausdrückliche schriftliche Zustimmung nicht gestattet.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Redpfjuxfucjx Amfscf Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Mit einem Schleifdurchmesser von 200 mm und einer Schleiflänge von 300 mm ist die JHP-2003CNC die kompakteste Einstech-Schleifmaschine in dieser Baureihe und nutzt die FANUC Oi-TF CNC-Steuerung. Konzipiert für schwere Schleifanwendungen, kann die JHP-2003CNC Spannvorrichtungen und Werkstücke bis zu 80 kg aufnehmen. Diese vollständig gekapselte Maschine wird mit Renishaw-Taster, kompletter Maschinenverkleidung und Nebelabscheider geliefert. Jainnher CNC Einstech-Rundschleifmaschine Beschreibung: JHP-2003 CNC Leistungsdaten: Max. Werkstückdurchmesser: 200 mm Max. Schleiflänge: 300 mm Max. Schleifdurchmesser: 200 mm Max. Werkstückgewicht: 80 kg Spitzenweite: 300 mm Spitzenhöhe: 100 mm Schleifscheibe: Abmessung: Ø405 x 50 x 127 mm Max. Umfangsgeschwindigkeit: 33 m/sec Scheibendrehzahl: 1.780 min⁻¹ Schleifkopf: Vorschubwinkel: 90° Schwenkbereich: ±0° Eilgang: 6 m/min Max. Verfahrweg: 220 mm Min. Einstellwert: 0,0001 mm Schleifvorschub: 0,001~6.000 mm/min Hydrodynamischer Druck: — Reitstock: Hübenhube: 30 mm Hülsendurchmesser: 48 mm Kegel: MK3 Hydraulikdruck: 20 kg Werkstückspindelstock: Spindeldrehzahl (stufenlos): 10~500 min⁻¹ Kegel: MK3 Spindeltyp: Cartridge-Ausführung Schwenkbereich: 120° (90° CCW; 30° CW) Werkstücktisch: Min. Einstellwert: 0,0001 mm Schwenkbereich CCW/CW: +10°/-3° Eilgang: 8 mm/min Max. Verfahrweg: 640 mm Antriebe: Schleifvorschub: 0,001~6.000 mm/min Schleifscheibenmotor: 5 PS 4-polig (optional 7,5 PS 4-polig) Werkstückspindelmotor: 1,0 kW Werkstücktisch (Z-Achse): 1,2 kW Werkstücktisch (X-Achse): 1,2 kW Hydraulikpumpe: 1/4 PS 4-polig Schleifkopfpumpe: — Kühlmittelpumpe: 1/8 PS 2-polig Magnetabscheider: 1/25 PS 2-polig Ölkühler: — Behälter: Hydrauliköltank (für Führungen, Spindeln & Messung): 30 l Schleifkopfschmierung: — Kühlmitteltank: 80 l Maschine: Nettogewicht (vollständig gekapselt): 3.800 kg Bruttogewicht (vollständig gekapselt): 4.100 kg Abmessungen (vollständig gekapselt): 3.300 x 2.100 x 2.200 mm Rjdpfx Amsnxk N Sefecf Verpackungsabmessungen (vollständig gekapselt): 3.500 x 2.200 x 2.200 mm Jainnher CNC Einstech-Rundschleifmaschine Serienausstattung JAINNHER JHP-2003CNC: - X-Achsen-Glasmaßstab - Arbeitsleuchte - Fußpedal - Winkeleinstelllehre - Hydraulischer Reitstock mit Handverstellung - Schleifscheibe und Flansch - Mit Hartmetall bestückte Spitzen (MK3) - Zentralschmieranlage - Diamantabrichter am unteren Arbeitstisch - Magnetabscheider MC-40/Kühlmitteltank/Pumpe - Stellfüße mit Klötzen - Werkzeugsatz und Werkzeugkasten - Komplett geschlossene Spritzschutz- und Ölnebelvorrichtung - Renishaw Messtaster - Transformator

Stanje: pripravljen za uporabo (rabljen), Na voljo je rabljeni visokoprecizni CNC okrogli brusilni stroj Studer S35. Razdalja med konicami: 1000mm, višina konic: 175mm, največji premer obdelovanca: pribl. 350mm, teža obdelovanca: pribl. 80kg, ločljivost: merilni sistemi s steklenimi merilnimi letvami, območje 0,0001mm (0,1µm). Ogled je možen po dogovoru. Rsdpeykuucofx Amfscf

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Required space approx. 3.6/3.5 m As a global leader in the field of Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new condition and with warranty, but also offer you service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical overhaul: - Complete machine overhaul according to Kellenberger measuring protocol - New service-friendly enclosure - New paintwork Electrical overhaul: - New state-of-the-art CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (on B-axis) Standard equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper. Optionally with fine adjustment - Grinding spindle stocks T1/T2/T3 - T1 grinding wheel diameter 400mm - T2 grinding wheel diameter 300mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4kW - High-resolution B-axis - Marposs measuring system for grinding wheel measurement - Marposs longitudinal positioning - GAP Control (sensor on grinding spindle stock) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra cost: - HF internal grinding spindle - High-precision, maximum rigidity workpiece spindle stock - Measuring control - Extraction system - Paper band filter Rcsdpfxjuwv H Ho Amfsf Control system: Grinding basic cycles - Zeroing workpiece with Z position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Measuring dressing diamond - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) - External and internal taper grinding (swivelling the B-axis, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angle - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° +/- Grinding spindle speed: 1500, 1700, 2200 rpm Infeed, step-by-step: 0.001–0.030 mm/Ø Infeed, continuous: 0–0.95 mm/Ø Table swivelling: ±8° Longitudinal table travel: 1300 mm Rcsdjuxftxjpfx Amfsf Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight max. - between centres (with clamping): 130 kg Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.5 t Space requirements approx.: 4.2 x 2.0 m As a world-leading company in Kellenberger overhauls/retrofits, we are not only able to deliver machines in new-machine quality with warranty, but also offer servicing for your machines, including recently delivered units, with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle indicator Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guideways in the X-axis flat slideway, as well as standard air lift-off in the grinding headstock. - Digital readout on two axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with this spindle) - New, stable internal grinding attachment, diameter 80mm or 100mm, with height adjustment - Increasing centre height to max. 225mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories available on request. Note: The machine tool currently does not meet the basic safety and protection requirements as specified in BetrSichV 2015. Raising the required minimum safety targets must be determined via a risk assessment according to BetrSichV.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor water-cooled, 9.8 kW - Marposs tool measurement - Active longitudinal positioning Rcedpfx Aouxfu Nemfof - Kel-Set - GAP on T1 and T2 from ELASO, contactless, integrated into the control interface - GAP on T3/T4 via fluid sensor - Semi-automatic balancing by ELASO integrated into the control interface for T1/T2 - Hydraulic tailstock with fine adjustment +/- 150 μm - Dressing device on lower table, workpiece spindle side - Dressing device on lower table, tailstock side - Dressing device on upper table - New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle head with direct drive * Strongly recommended for non-circular grinding * Max. workpiece weight (chucked): 75 kg * Max. workpiece weight (between centers): 150 kg * Water-cooled * MK5 combined with short taper mounting DIN 55026 * Oriented spindle stop * Fixed base B-axis with direct drive, centre height 225 mm * Extremely torsion-resistant * High positioning accuracy * Resolution ° * Water-cooled MECHANICAL OVERHAUL: - Complete machine refurbished according to Kellenberger measurement protocol - Repainted New hydraulic power unit: - Improved temperature control (oil cooler) - Energy-saving: Only one pump, not running continuously! - Pressure monitoring - Monitoring of water content in hydrostatic oil (early detection of bellows damage) Hydrostatic ball screw drive in X-axis - Wear-free, as no contact during operation - No loss of accuracy, even during prolonged operation under full load at max. speed - Frictionless at low speeds - No reversal backlash when changing direction - Transmits minimal rotational movements - No stick-slip effect at low speeds - No fluctuations in friction torque due to ball circulation - Higher axial stiffness than ball screws - Significantly better damping, resulting in improved workpiece surface and tool life - No oscillations due to ball circulation - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor with higher accuracy and much lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling requirements than linear motors Electrical overhaul: - Brand new, modern CNC cylindrical grinding control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, BERUS pressure switches, etc. - New absolute linear scales in X and Z axes - New absolute encoder (for B-axis) Control: The grinding software consists of a basic license and various options that can be enabled depending on machine equipment. Basic software: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on the wheel) - Semi-automatic oscillation grinding - Workpiece...

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including new, modern, and future-proof control system. New servo motors in X-axis and for the workpiece spindle head. Photo shows a previously delivered machine in standard configuration. - Operation via touch panel is extremely user-friendly. - The symbolism on the control panel is virtually identical to the original control system, eliminating the need for retraining. - Diagnostic function with display of PLC notifications and the digital I/O - Dressing function can be expanded or modified according to customer requirements. - Optionally, workpiece spindle can be stopped in a defined orientation. - New maximum infeed of 40 mm, expandable upon request. - Digital readout in 2 axes. Resolution in X-axis: 0.5 µm Options: - Encoder with digital display in the workpiece spindle head - Encoder with digital display in the grinding spindle head (height adjustment with spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment. - Increase in centre height to a maximum of 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available upon request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic longitudinal table movement and rapid traverse. Versatile application in production for external and internal cylindrical grinding, or combined external, face, and internal grinding in a single setup for individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Gauging control Rcedpfxouwv Ide Amfof Please note: The machine tool currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. The required minimum safety level must be determined by means of a risk assessment according to BetrSichV.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 250 mm Grinding length: 400 mm Centre height: 125 mm Control: Fanuc 21i-T Machine serviced and partially overhauled. Rsdjvx Dvuspfx Amfjcf - New grinding spindle bearings - New X-axis spindle - Upper table surface reground - New table geometry - New geometry: workpiece support (WSS) to grinding spindles B-axis with 1° Hirth serration Longitudinal positioning HF internal grinding spindle Gap control (GAP) Paper band filter

Stanje: rabljeno, Leto izdelave: 1980, Teža stroja pribl. 6 t Rcsdpfoxzu Aysx Amfef

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Schaudt A500 500-2500 Grinding length: 500 / 750 / 1,000 / 1,500 / 2,000 / 2,500 mm Centre height: 150 mm / 180 mm / 225 mm Workpiece weight: 300 kg / 500 kg Rcedped Hfd Nsfx Amfsf Additional freely selectable options: - Completely new control cabinet with SPS-Basic and panel - Conversion to ball screw drive including DUO-Control (cycle-controlled) - "Workpiece storage" for 10/15/30/50 pieces - Mini handheld device for Duo-Control - Glass scale on X and Z axes - Touch dressing sensor technology - Frequency inverter for external grinding spindle - Swiveling internal grinding unit - Frequency inverter for internal grinding spindle - CE marking in combination with partially or fully encapsulated coolant enclosure - Remote maintenance - Suitable coolant / extraction system - Grinding wheel flange / change arm - and much more We are also happy to overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and many more.

Stanje: rabljeno, Leto izdelave: 1997, Premer brušenja 350 mm Dolžina brušenja 1000 mm Rjdpfx Aey R Ed Nomfscf Višina konic 175 mm Teža stroja pribl. 6 t Prodaja poteka s funkcijskim preizkusom Po želji z novo geometrijo mize za doplačilo C-os za poligonsko brušenje B-os z ročnim vrtenjem Premer brusnega kola levo 400 mm Premer brusnega kola desno na zahtevo Naprava za notranje brušenje Konjiček z fino nastavitvijo

Stanje: rabljeno, Leto izdelave: 2005, Tehnične podrobnosti: Premer brušenja: 5 – 55 mm Rcedpfxjzlh Spj Amfef Dolžina brušenja: 500 mm Višina med centri: 75 mm Skupna potrebna moč: 45 kW Video povezava: ?v=MX5Vpugniu4 Uporabljena CNC zunanja in okrogla brusilnica, Proizvajalec: JUNKER, model: QUICKPOINT 3000 s krmilnikom SIEMENS, Delovni čas: 16.387 ur, proizvodni čas: 9015 ur Zadnje vzdrževanje stroja: 2026 Stroj izvira iz tekoče proizvodnje in je še vedno priključen na električno omrežje. Razpoložljivost: takoj na voljo Obseg dobave stroja: Št. serije: 2331, letnik 2005, št. inventarja 16890 z ventilom za razbremenitev tlaka in hlajenjem, proizvajalec LTA, Št. notranja: 59900, z hlajenjem, proizvajalec Rittal, ter sistem za pripravo olja, proizvajalec KNOLL, tip AE1114, Št. serije: 200516371, 30 – 200 m² Tehnični podatki so na voljo v dokumentih.

Stanje: dober (rabljeno), Leto izdelave: 2014, Na voljo je brezsrediščni okrogli brusilni stroj proizvajalca Tschudin, vključno z avtomatizacijo. Stroj je v zelo dobrem stanju in si ga je možno ogledati. Redpfx Amex Urh Aefecf Tehnični podatki so navedeni v PDF dokumentu.

Leto izdelave: 1955, stanje: pripravljen za uporabo (rabljen), Na voljo je klasični stroj za notranje cilindrično brušenje Fortuna. Razdalja med konicami: 1500 mm, višina konic: 225 mm, največji premer obdelovanca: 450 mm, največja masa obdelovanca: 300 kg, premer brusnega koluta: 450 mm, širina brusnega koluta: 80 mm, izvrtina: 203 mm, hitrost vrtenja: 265 o/min, mere stroja (X/Y/Z): približno 3450mm/1450mm/1550mm, teža: približno 4000 kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Rjdoyg Nvtepfx Amfocf

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Schaudt ZX11 Grinding length: 600 mm Rsdpfsd Hfqrsx Amfscf Centre height: 180 mm (optionally more available) Workpiece weight: 80 kg Further selectable options: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control system - Fast setup via GSN operator interface - Dressing spindle for diamond form roll - Balancing and touch sensors - Hydraulic tailstock clamping / release - Automatic Siemens door drive - 19" / 22" display - Remote maintenance - Conversion to needle jet nozzles - Matching coolant extraction system - Automation preparation - and much more. We can also overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and more.

Stanje: rabljeno, Leto izdelave: 1999, Premer brušenja 350 mm Dolžina brušenja 1000 mm Redpjy U N Hpofx Amfjcf Višina med konicama 175 mm Krmiljenje FANUC 18i-TA GENERALNO OBNOVLJENO Fotografija podobnega že dobavljenega stroja - Oprema brusnega kolesa LEVO 500 mm - Oprema brusnega kolesa DESNO 400 mm - Notranja brusilna enota 120 mm za jermensko gnane notranje brusilne vretena (standard) - CNC krmiljenje FANUC 18i-TA - Pripravljeno za kombinirano merilno krmiljenje Marposs (Minialsar, Positionar) z E5N - B-os - Kel-Set - Hidravlični povrat pinole - Mikro nastavitev na konjičku - Glavna vretena z vrtljivo osnovo

Stanje: rabljeno, Leto izdelave: 1981, Données techniques : Diamètre de rectification : 240 mm Longueur de rectification : 700 mm Hauteur de pointe : 125 mm Longueur de la table : 1525 mm (pivotante) Distance broche de rectification – table min./max. : 225/410 mm Plage de vitesse de la meule : 1590 tr/min Diamètre de la meule (neuve) : 600 mm Diamètre de la meule (usée) : 450 mm Vitesse de coupe : 50 m/s Puissance totale requise : 13 kW Poids de la machine env. : 5,5 t Encombrement env. : L :2,8 x l :2,2 x H :1,8 m RECTIFIEUSE CYLINDRIQUE SEMI-AUTOMATIQUE Autres données : - Réglage de la poupée de rectification : 185 mm - Avance de la poupée de rectification : 0,001 à 0,05 mm/min en continu - Vitesse de broche pièce : 50 à 500 tr/min en continu Machine équipée de : - Fourreau à rappel hydraulique - Dispositif de refroidissement - Dispositif de dressage Rcodpfx Ameu Ng Avsfef - Dispositif d’équilibrage de meule - Dispositif de déplacement transversal poupée de rectification - Réglage hydraulique de la table, table supérieure pivotante i.D.

Stanje: rabljeno, Tehnični podatki: Premer brušenja: 600 mm Dolžina brušenja: 2600 mm Višina konic: 180 mm Premer obdelovanca - maks.: 360 mm Obodna višina: 600 mm Premer brusnega koluta: 600 x 305 x 160 mm Skupna potrebna moč: 17,6 kW Naprava za hlajenje: 90 l/min Obratov vretena obdelovanca: 12,5-250 min^-1 Brezstopenjski pomik: 0,05 - 6,0 mm Teža stroja pribl.: 8,2 t Dimenzije stroja pribl. D x Š x V: 6,4 x 2,2 x 1,9 m Finibalanz naprava za uravnoteženje Konjiček s cilindrično napako in digitalnim prikazom X=0,001 - Z=0,01 Rjdpfx Amsw Rktbofocf Naprava za radij 2-10 mm

Stanje: rabljeno, KELLENBERGER KEL-VARIA R175 x 1500 is a CNC cylindrical grinding machine designed for high precision, utmost accuracy, and reliable operation. Capacities: centre height 175 mm, centre distance 1500 mm, Z-axis 1650 mm, maximum workpiece weight 150 kg; grinding wheels Ø500×80 mm (bore 203 mm) or Ø400×63 mm (bore 127 mm); grinding spindle travel max. 320 mm. Technical data: stepless grinding wheel speeds 1000–2150 rpm (peripheral speed 45 m/s); feed 7,500 mm/min; workpiece spindle swivels -10/+100° with 8–800 rpm; permissible load 160 Nm; grinding spindle motor 7.5 kW, workpiece spindle motor 2 kW; connection 3×400 V 50 Hz; rapid traverse 15 m/min; weight approx. 6,000 kg; dimensions 4,700×2,300×2,000 mm; compressed air 6 bar. Accessories: coolant system, paper band filter system, MARPOSS touch probe, set of grinding wheels, live centre, set of centres, set of workpiece drivers, set of gap gauges, lighting, 2 tool cabinets, tailstock with fine adjustment, coolant/mist extraction, collet chuck. Achieves tight tolerances. Rcsdpjyxn Itjfx Amfof

Stanje: dober (rabljeno), skupna širina: 3.500 mm, skupna dolžina: 19.000 mm, skupna višina: 2.100 mm, teža obdelovanca (maks.): 6.000 kg, premer brušenja: 850 mm, dolžina brušenja: 6.000 mm, višina središča: 425 mm, Cilindrični brusni stroj Schmaltz - RM 82/6000 Rcodpfjy Dr Eaex Amfjf MACH-ID 9492 Proizvajalec: Schmaltz Tip: RM 82/6000 Višina konic: 425 mm Premer brušenja Ø: 850 mm Dolžina brušenja: 6000 mm Dimenzija brusnega kamna: 1100 x 80 x 560 mm Hitrost vrtenja brusnega kamna: 700 o/min Zasuk mize: -5 do +5° Konjiček: 160 x 100 Mk Dolžina: 19.000 mm Širina: 3.500 mm Višina: 2.100 mm Teža: 31.000 kg Prosimo, upoštevajte: Informacije na tej strani so bile pridobljene po najboljšem vedenju in vestno s strani nas ter, kolikor je mogoče, s strani proizvajalca. Informacije so podane v dobri veri, vendar za njihovo točnost ne moremo jamčiti. Posledično te informacije ne pomenijo zagotovila ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: rabljeno, Leto izdelave: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Rsdpsvq R Uzjfx Amfocf Centre height: 320 mm The machine has been overhauled according to the Kellenberger measurement protocol and newly painted. The prone-to-failure Güttinger control system was replaced with the modern BEMA X control system. This means that, in the process, the machine also received completely new electrical equipment. The machine features a reinforced workpiece headstock for through-feed grinding of heavy workpieces. At present, the machine does not comply with the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV) 2015. Raising the required minimum protection level must be determined by a risk assessment in accordance with the BetrSichV.