Cilindrični brusilni stroj - Universal

EMAG Weiss WUG 21 (W27) / 650 mm

Stanje: rabljeno, Leto izdelave: 2014, X-os 1.200 mm y-os 3.000 mm Iedpfoxyaf Dex Al Notf z-os 1.000 mm Ločljivost 0,0001 mm Največja višina obdelovanca 1.200 mm Največja teža obdelovanca 3.000 kg Po naši oceni je stroj v dobrem rabljenem stanju in ga je mogoče po predhodnem dogovoru pregledati pod napetostjo. Dodatna oprema, prikazana orodja in vpenjalne naprave so vključene v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in informacijah kot tudi do vmesne prodaje!

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6,000 rpm, spindle power: 8.5 kW, tool holder: SK40, tool magazine capacity: 22 stations, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control unit: Heidenhain TNC 426. An on-site inspection is possible. Itedpfjv Uqb Nex Al Nsf

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: Itodpouxft Eefx Al Njf - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control unit Note: The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 12.000 kg, dolžina pomika po osi Y: 300 mm, dolžina podajanja os Z: 1.080 mm, premer mize: 1.200 mm, hitrost pomika os X: 3 m/min, hitrost podajanja osi Y: 500 m/min, hitrost podajanja os Z: 3 m/min, vhodni tok: 195 A, premer obdelovanca (maks.): 1.600 mm, dolžina vretena za rezkanje: 450 mm, namizna vrtalna stiskalnica: 400 mm, hitrost vretena (min.): 250 obr/min, skupna masa: 51.000 kg, moč: 115 kW (156,36 KM), Oprema: dokumentacija / priročnik, Liebherr high-performance gear hobbing machine LC1502 in good condition Control: Liebherr LH90 V4, drives by Bosch Rexroth Comprehensive accessories included such as BHG, coolant unit for lubrication and coolant, fume extraction, cutter arbors, various software packages/limit extensions, and complete documentation. Iodpfewqm A Tjx Al Njtf We can also assist with installation and commissioning right up to production, according to your needs!

Stanje: dober (rabljeno), valjčni brusilni stroj Iedpfx Aljtrgnds Notf

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: BBT 30 (Big-Plus) - Spindle drive power: 12 kW - Spindle speed: 10,000 rpm LINEAR AXES - Travel X/Y/Z axes: 700/400/330 mm - Rapid traverse rate (X/Y/Z): 54 m/min - Feed rate (X/Y/Z): 1-30,000 mm/min TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 21 TABLE - Table size: 850 x 410 mm - Max. table load: 300 kg - Distance from table to spindle nose: 250–580 mm ELECTRICAL SUPPLY - Supply voltage: 380 V WEIGHT AND DIMENSIONS Isdpfex Tvizjx Al Njtf - Footprint: 2,165 x 2,087 mm - Machine height: 2,345 mm - Machine weight: 2,000 kg MACHINE HOURS - Operating hours: 3,207 h ACCESSORIES - CNC control: Fanuc 31i model B5 - 3-color status light ROTARY TABLE * Manufacturer: Häberle * Model: DTTiB * Travel 4th axis: 360° * Minimum resolution 4th axis: 0.001° * Travel 5th axis: -7/+100° * Minimum resolution 5th axis: 0.001° * Clamping type: Pneumatic - Coolant tank * with high-pressure pump: 15 bar - Through-spindle coolant (TSC) - Chip conveyor: rear - Tool measuring probe: Renishaw - Workpiece measuring probe: Renishaw - Electrical transformer - Machine vice - Tool holder

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 475 mm, pomik osi Y: 600 mm, pomik po osi Z: 400 mm, teža obdelovanca (maks.): 200 kg, največja hitrost vrtenja: 42.000 obr/min, premer mize: 450 mm, 5-Axis Röders Tec RXP800DS - Fully Refurbished - The machine is completely overhauled, inspected, and measured in our facility. The machine once again meets original factory tolerances! Working Area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance Height: 500 mm Tool Changer: 52 positions Spindle: HSK40E, max. 42,000 rpm Ijdpfxovvlmco Al Netf Tool Measurement Laser for tool calibration Handheld Control Unit Minimum Quantity Lubrication Prepared for extraction system (e.g. for graphite machining) Spindle Compensation Precision Package CNC Control: Röders RMS6, latest version The machine can be viewed in operational condition at any time. For more information about the type and scope of our refurbished machines, please visit our website or our Hüttmann YouTube channel.

Stanje: dober (rabljeno), Leto izdelave: 2015, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 650 mm, 1 Horizontal machining center Make: STARRAG HECKERT, Model: HEC 400D, Year: 2015 Control system: Siemens Sinumerik 840D Travel X/Y/Z = 650 x 650 x 650 mm 2-station pallet changer, pallet size: 400 x 400 mm NC rotary table 360° x 0.001° 80-position tool changer Tool holder: HSK 63 Spindle speed: 15,000 rpm Internal coolant supply (IKZ) 50 bar Chip conveyor, band filter, coolant temperature control, spindle cooling Sound and control cabinets Operating hours: 43,698 Spindle hours: 5,401 Iedpfx Ajuav H Nel Notf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, MAZAK QUICK TURN 250MY Največji premer obdelave: 380 mm Največje število vrtljajev rezkanja: 5.000 obr/min Največje število vrtljajev vretena: 4.000 obr/min Največji premer palice: 80 mm Stroj je opremljen z: - CNC krmilnik Mazatrol SmoothG - KITAGAWA trivraten vpenjalnik BB-210, premer 254 mm - Tool Eye - osa C - osa Y - avtomatski izmetovalec delov - vmesnik za podajalnik palic - signalna luč (3-barvna LED) Iodpfx Aleyki Taj Njtf - okrepljena črpalka za hladilno tekočino - transporter ostružkov - standardni komplet orodij MAZAK

Stanje: rabljeno, Leto izdelave: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: [mm not specified] Workpiece height: 60 mm Total power requirement: 50 kW Machine weight: approx. 7,000 kg Space requirement: [not specified] DISKUS vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 S/N: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc external diameter: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Spindle adjustment vertically, each approx.: 150 mm Hydraulic infeed impulses for depth feed: 0.0025 – 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed each approx. (24 m/s)/765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Machine weight: approx. 7,000 kg Accessories / Special features • Workpiece rotary table device for round transport discs with corresponding cut-outs for inserting components and with automatic discharge of finished parts onto a chute into a transport box. Ijdpfx Aot Hw N Hel Njtf • IONIC measuring control No. 9 So with probe for measuring ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Stepless speed adjustment of the rotary device depending on the grinding dimension and workpiece. • Manual grinding wheel adjustment via corresponding buttons • Hydraulically pivoting dressing unit (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and automatic return to the effective workpiece thickness after dressing = high time savings, can be triggered manually as well as via timer • Ampere counters for both grinding spindle drives * Central lubrication system, • Mechanical height check of parts with automatic machine shutdown in case of overheight • Separate control cabinet, separate hydraulic unit, separate large belt filter system, various grinding wheels, various transport discs, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in high-volume production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice