Notranji cilindrični brusilni stroj

Fortuna ES 450-1500

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg Fpjdpfxsrqwbis Apleg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: rabljeno, Leto izdelave: 1974, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Turning length: 2,100 mm Distance between centers: 2,000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1,800 / 18 steps rpm Rapid traverse X-axis: Slide 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 180 mm Control voltage: 220 V Approx. machine weight: 3.25 t Approx. machine dimensions LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g. metric threads, module threads, and inch threads Cross slide rapid traverse Chuck guard 2x chip pans Accessories: (see comparable on photo) 2x steady rests (1x closed and 1x open) Face plate 3-jaw chuck Jaw sets Flange Centers Fodpfx Asu Ix Dcjplspg various gears

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0000025, višina središča: 315.425 mm, teža obdelovanca (maks.): 3.000 kg, dolžina brušenja: 3.000 mm, premer brusilnega koluta: 750 mm, skupna širina: 2.700 mm, skupna dolžina: 11.000 mm, skupna višina: 2.200 mm, premer brušenja: 630.850 mm, teža obdelovanca med konicami: 3.000 g, razdalja med središči: 3.000 mm, širina brusilnega kolesa: 100 mm, dolžina podajanja os Z: 3.300 mm, hitrost vretena za brušenje: 1.000 obr/min, skupna masa: 17.000 kg, vrtljajska hitrost (min.): 2 obr/min, največja hitrost vrtenja: 250 obr/min, trajanje garancije: 24 meseci, hitro pomikanje X-os: 3 m/min, hitri pomik na osi Z: 6 m/min, vhodna napetost: 400 V, največja hitrost vretena obdelovanca: 250 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Cylindrical grinder BUC63/3000 CNC, new, in 100% condition, equipped with Sinumerik ONE or INTRONIX TOS CNC control system. It is possible to extend the machine with an additional device for superfine finishing SUPFINA, or with a grooving device for rubber or plastic rollers. Fpjdpfx Asu U Ewgspleg

Stanje: rabljeno, Leto izdelave: 1992, hitrost vretena (min.): 7.500 obr/min, največja hitrost vretena: 24.000 obr/min, 4 motor-driven grinding spindles (liquid-cooled, with purge air / oil mist lubrication) including the REFU HF frequency converter, e.g., suitable for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Fodpol Tn Afjfx Aplspg Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Frequency Converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter, frequency inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional but are sold without warranty – year of manufacture approx. 1992. A batch of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. We sell exclusively to countries of the European Community.

Stanje: dober (rabljeno), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Centre Distance: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Smallest Automatic Travel: 1.5 mm Maximum Travel: 400 / 700 / 1020 mm Maximum Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Handwheel Feed Travel: 20 mm Maximum Infeed Depth: 1.7 mm Grinding Spindle Head Fpsdpfovca Izsx Apljg Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Spindle Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Spindle Head Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Mounting Taper: Morse 5 Collets: W25 Tailstock Mounting Taper: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No guarantee is given for the correctness, completeness, or topicality of the information provided.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, teža obdelovanca (maks.): 130 kg, dolžina brušenja: 1.500 mm, premer brusilnega koluta: 500 mm, skupna širina: 2.155 mm, skupna dolžina: 5.465 mm, skupna višina: 1.700 mm, premer brušenja: 300 mm, širina brusilnega kolesa: 63 mm, Univerzalni brusilni stroj je bil leta 2021 generalno obnovljen in je bil od takrat komajda uporabljen. Stanje stroja je praktično kot novo. Oprema kot na fotografijah. Stroj je priključen na elektriko in je na ogled po dogovoru kadarkoli. Tehnične specifikacije: Premer brušenja: 300 mm Fjdpox A Dfysfx Aplopg Dolžina brušenja: 1500 mm

Stanje: dober (rabljeno), Leto izdelave: 1992, Dvoranski žerjav, žerjav, električni vitel z jeklenico, dvižni mehanizem, motorni jekleni vitel, motorni vitel, koloturnik, vlečni vitel, škripčevje -Proizvajalec: Stahl, žerjavni voz z električnim vitlom z jeklenico -Žerjavni voz: Tip GO 24 20 16 -Hitrost vožnje: 20 m/min -Razmik med kolesi: 800 mm Fpodpol Tuvdsfx Apljg -Jekleni vitel: Tip AS 2010 -Vlečna sila: 1000 kg / nosilnost 4000 kg -Hitrost bobna: 16 m/min / dvižna hitrost 4 m/min -Transportne mere: 1250/1180/V400 mm -Lastna masa: 356 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, premer struženja nad prečnim suportom: 925 mm, stružna dolžina: 2.800 mm, premer struženja: 1.200 mm, izvrtina vretena: 132 mm, največja hitrost vretena: 2.000 obr/min, Siemens 840D CNC Fpjdpfx Apewzyn Rolog 48-position tool changer with Capto C8 tools Chip conveyor Forkardt 400 mm chuck 2 SMW Autoblok hydraulic steadies Capacity: 2,800 x 1,250 mm Spindle bore: 132 mm Weight: 23,500 kg

Stanje: rabljeno, Leto izdelave: 1990, Grinding length: 1500 mm Fpodswlviropfx Apljg Grinding width: 550 mm Workpiece height: 400/450 mm Table size: 1900 x 450 mm Table speed: 1 - 25 m/min Automatic cross feed: 0 - 60 mm/stroke Grinding wheel dimensions: 400 x 100 x 127 mm Spindle speed: 1400/2800 rpm Total power requirement: 15 kW Voltage: 380 V Machine weight: approx. 5 t The machine was overhauled in 2015 and retrofitted with a modern control system. Machine is equipped with coolant system, automatic vertical feed, wheel dressing device, and wheel holders.

Stanje: rabljeno, Leto izdelave: 2000, Grinding diameter: 360 mm Grinding length: 1600 mm Centre height: 180 mm Internal diameter: 0 mm Grinding depth: 0 mm Swing diameter: 0 mm Total power requirement: 40 kW Machine weight approx.: 10,000 kg Space requirement approx.: m KARSTENS Universal "CNC" External, Internal and Face Grinding Machine with capabilities for multi-sided, non-circular, polygon, and thread grinding BWO CNC control Type 900 C, Type K 51-1500 Year of manufacture: 2000 Serial no. 99 033 _____ Centre height: 180 mm Centre distance / Grinding length: 1,700/1,600 mm Max. workpiece weight between centres: 250 kg External grinding: Grinding diameter approx.: 5 - 360 mm Grinding wheel size (diameter x width x bore): 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s): 1,900 / 2,200 rpm Drive power external/face/internal: 7.5 / 7.5 / 4.0 kW Grinding spindle head: 3 positions B-axis swivel range: 240 / 17.5 ° X-axis / Cross slide stroke: 360 mm Grinding slide feed rate: 0.001 – 125 mm/min Workpiece spindle speeds, steplessly adjustable: 1 – 1,000 rpm C-axis spindle mount / Bore, 24 mm MK 4 Table feed (Z-axis): 0.01 – 10 m/min Total drive power: 40 kW - 400 V - 50 Hz Weight approx.: 10,000 kg Accessories / Special features: Universal CNC cylindrical grinding machine for almost all grinding tasks, suitable particularly for non-circular grinding / eccentric & cam profile grinding, polygonal grinding, as well as face grinding of multi-sided workpieces and even thread grinding with corresponding grinding wheel profiles. Freely programmable BWO CNC controller with numerous subprograms and easy parameter input. Grinding of multiple diameters in a single clamping possible. - B-axis with three grinding spindles, one with MOVOMATIC touch probe - MOVOMATIC pneumatic diameter gauge CR 60 for mounting on the grinding table, control unit type ES 400 - MPM grinding wheel balancing unit, straight dresser with diamond fleece mounted on table, powered diamond wheel dressing device - Workpiece spindle head pneumatically movable, hydraulic tailstock with adjustable quill - Various further accessories, but without coolant equipment Condition: good to very good – demonstration possible under power Ideal machine for spindle manufacturing, etc. Delivery: ex-stock – as inspected Fpjdst Hw Rdspfx Apljg Payment: strictly net – upon receipt of invoice