Jaespa Avtomatska Tračna Žaga - Vodoravna nakup rabljenega (4.831)

Stanje: novo, Saw frame: Swivel frame Saw blade dimensions: 3160 x 27 x 1.1 mm Blade speed: 20-100 m/min Isdpsrzx Dpofx Al Nsia Cutting capacity round: 270 mm Cutting capacity square: 270 mm Cutting capacity rectangular: 350 x 220 mm Dimensions (LxWxH): 2230 x 770 x 1450 mm Working height: 910 mm Weight approx.: 525 kg Cutting range at 60°: round 150 mm, square 100 mm, rectangular 150 x 100 mm Cutting range at 45°: round 240 mm, square 170 mm, rectangular 270 x 210 mm Cutting range at -45°: round 210 mm, square 180 mm, rectangular 270 x 210 mm Motor: 1.5 kW Coolant pump motor: 0.12 kW Band Saw KK Kletzer 270DG Gravity Feed Double Mitre Head, Heavy-Duty Structural Steel Machine Standard equipment: - M42 bimetal saw blade - Variable speed - Inverter control unit - Coolant system - Auto. Blade breakage shutoff system - Manual vice - Gravity arc frame - Blade tensioning device - Pendant control - Mitre head, 2 directions - Heavy-duty gearbox

Stanje: novo, Cutting capacity round: 320 Cutting capacity 45°: 280 Iisdpfx Alsrz Uzbs Noa Cutting capacity rectangular: 420 x 220 Cutting capacity 45° mitre, flat: 280 x 200 Cutting speed: 20–100 Saw blade dimensions: 3660 x 27 x 0.9 Motor: 1.5 kW Weight approx.: 625 kg KK Kletzer UBS 320 Bandsaw High-performance structural steel saw Basic operation Standard equipment: - M42 bimetal saw blade - *Variable speed - Inverter control unit - Coolant system - Automatic saw blade breakage shut-off system - Saw blade tensioning device - Material support stand - Mitre vice - Blade brush

Stanje: novo, Cutting capacity round: 320 Saw band length: 4160 x 34 x 4.1 Iiedperz Uzmofx Al Nea Cutting capacity at 45°: 320 Cutting capacity rectangular: 450 x 320 Cutting capacity at 45° miter flat: 330 x 320 Cutting speed: 20-100 Dimensions (LxWxH): 2230 x 1150 x 1350 mm Motor: 2.2 kW Weight approx.: 1030 kg KK Kletzer 320DGH Semi-Automatic Bandsaw with Double Mitre Head High-performance machine made from structural steel Standard equipment: - Bi-metal saw blade M42 - Variable speed - Inverter control unit - Coolant system - Automatic saw blade breakage shut-off system - Hydraulic vise - Hydraulic bow - Saw blade tensioning device - Pendant control - Mitre head with dual direction - Heavy-duty gearbox

Stanje: novo, Semi-automatic metal bandsaw with high cutting accuracy. This machine enables stepless 90° cuts as well as mitre cuts—left up to 45°, right up to 30° (swivel range: left 45°, right 60°). Standard features: - Large rotatable support table with zero wear! (The saw band’s cut channel rotates along during mitre cuts) - Band tension gauge - Hydraulic control of cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Saw frame height limitation via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material & tube) - Lowering of the saw arm via hydraulic cylinder; infinitely adjustable - Lifting of the saw arm after cut is manual - Easy, manual sliding of the vise left/right - Electric band tension monitoring with saw blade break control - Coolant pump feeding both saw blade guides - Carbide saw band guides and guide rollers - Bi-metal saw blade M 42 - Chip brush Technical data: ● Cutting range: round flat square 90° 278 340 x 275 275 45° R 260 320 x 255 230 30° R 155 145 x 115 115 45° L 205 145 x 275 180 Iiodpod Dpz Sefx Al Nja ● Drive power: 1.5 kW // 400 V // 50 Hz ● Band speed: 20–120 m/min, stepless ● Saw blade dimension: 3125 x 27 x 0.9 mm ● End piece length: 20 mm ● Min. diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1500 x 2100 mm ● Weight: 410 kg

Stanje: novo, The individual 520.360 DGH is a semi-automatic double mitre bandsaw in a twin-column design. The saw offers a continuously adjustable mitre range from 30° left to 30° right. The individual 520.360 DGH model is equipped with a fully-stroke hydraulic vice and an easy-to-use control panel with plain text display. Standard features: • Double mitre cuts: 30° – 45° – 90° – 45° – 30° • Fully-stroke hydraulic vice • Saw frame mounted on pre-tensioned linear guides • Infinitely variable blade speed • Infinitely adjustable feed rate and cutting pressure • Automatic cutting pressure regulation • Precision carbide blade guides • Powerful 3.0 kW drive motor • Modern control system with plain text display and membrane keypad • Freely positionable control console • Large-dimensioned hydraulic unit • Built in accordance with current CE standards and safety regulations Including: Minimum quantity lubrication system Digital mitre angle display Iiodpsdyn H Tsfx Al Nea Frame height adjustment from control console Price on request

Stanje: novo, Leto izdelave: 2026, Super-robust, reliable, and modern semi-automatic metal band saw with automatic arm raising and lowering. The saw arm swivels both left and right, from -45º to +60º. This machine is indispensable in any metalworking shop. The saw is perfectly suited for cutting pipes, profiles, and solid materials. Product Features The CORMAK S-200RH band saw comes standard with automatic arm lowering and raising, as well as a height regulator allowing the arm to be raised to match the height of the material being cut. Thanks to an automatic hydraulic damper, manual operation is limited to advancing and clamping the workpiece in the vise. The arm, made from a single-piece cast iron, together with the robust and stable frame, ensures exceptional rigidity for the S-200R saw, resulting in trouble-free operation and extremely high cutting precision. The innovative design and manufacture of CORMAK PREMIUM LINE semi-automatic and automatic saws, in accordance with ISO:90001 and ISO:140001 certification standards, ensures safety, quality, and reliability. The use of M3V series motors—from ABB, a renowned global manufacturer and world leader—guarantees long-lasting and trouble-free performance. As the manufacturer and sole representative on the Polish market, we ensure product authenticity and provide professional, well-trained warranty and post-warranty service. Technical Data TYPE – semi-automatic ARM RAISING AND LOWERING – hydraulic with stepless lowering adjustment BLADE SPEED – 36/70 mm/min MITRE CUTTING – left from 45° to right 60° VISE – hydraulic MINIMUM CUTTING DIAMETER – Ø 5 mm MINIMUM MATERIAL LENGTH IN VISE – 30 mm VISE BASE HEIGHT – 780 mm SAW BLADE – 27x0.9x2910 mm TOTAL POWER – 2.1 kW DIMENSIONS (LxWxH) – 1600 x 800 x 1400 mm WEIGHT – 530 kg Angle 0º -----ø250 320 x 240 240 x 240 45º L ø200 220 x 120 190 x 190 45º R ø220 235 x 120 210 x 210 60º R ø110 155 x 110 100 x 100 Standard Equipment - Control console on separate pedestal - Integrated hydraulic unit - Hydraulic arm movement control (up and down) with stepless lowering speed adjustment - Arm position memory function (arm returns after the cut to a predetermined height) - Mitre cutting left/right 45° - 0° - 45° - 60° - Saw blade cleaning brush - Cooling system Iiedei D D A Sopfx Al Noa - Bimetallic band saw blade - CE Declaration of Conformity - Technical and operation documentation The listed price is NET. Price does not include shipping costs. For more information, please contact us by phone or email. Please visit our website to view our full range.

Stanje: novo, Leto izdelave: 2026, Band Saw for Metal CORMAK BS530H – Professional Tool for Cutting Pipes and Profiles The CORMAK BS530H metal band saw is a highly efficient semi-automatic band saw designed for precise cutting of steel components, pipes, and profiles at various angles. Its robust cast iron construction, reinforced blade guide system, and advanced hydraulics make it ideally suited for serial production and demanding industrial environments. The integrated control panel allows single-operator management of all machine functions, significantly reducing operating time and increasing workplace ergonomics. Key machine features Semi-automatic mode – hydraulic raising and lowering of the saw arm as well as vice control via the operator panel. Worm gearbox with bronze components ensures smooth and precise operation without vibration. Stepless cutting speed adjustment from 20–70 m/min for a wide range of materials. Carbide and ball bearing blade guides – durability and precise blade tracking. Quick-release vice, operated manually or hydraulically, with left/right positioning capability. Angle cutting from -45° to +60° with a precise scale readout. Heavy-duty cast iron frame ensuring cutting stability and long service life. Hydraulic arm descent regulation with the ability to set the return height. Construction and technology The BS530H model is distinguished by its reinforced drive gearbox and industrial-grade hydraulics, ensuring reliability even during heavy-duty operation. Its massive base design reduces vibration and guarantees uniform work. The ergonomic control panel enables full process management from a single location. The cooling system, integrated into the base, efficiently dissipates heat and contaminants, protecting the blade from overheating. Precision and performance Thanks to stepless speed adjustment, the option of manual or semi-automatic operation, and the use of a dial-type tensiometer for blade tension control, the BS530H metal band saw guarantees repeatability and quality of cuts even in extended production runs. Performance is further enhanced by the material support roller and the arm locking mechanism, ensuring operator safety at the end of the cycle. Applications This machine is intended for industrial production plants, metal workshops, and companies conducting batch cutting of profiles, pipes, and solid steel sections. It is ideal for serial manufacturing, prefabrication, and preparation of parts for welding or further processing. Standard equipment Control console with semi-automatic functions Hydraulic vice Blade cleaning brush Liquid cooling system with pump Infeed support roller (front) Dial-type tensiometer Iiedow U Svljpfx Al Nsa CE certification, technical documentation (DTR) Technical data Working height: 965 mm Cutting speed: 20 – 70 m/min Blade dimensions: 3770 x 34 x 1.1 mm Coolant system power: 0.1 kW Total power: 3.0 kW Power supply: 400 V Dimensions (W x D x H): 2200 x 1400 x 2050 mm Weight: 730 kg

Stanje: zelo dobro (rabljeno), KASTOmicut U 2.6 – Semi-Automatic Pivot Frame Bandsaw incl. Long Roller Conveyor For sale is a semi-automatic pivot frame bandsaw, KASTOmicut U 2.6, featuring a very robust design. The machine offers steplessly adjustable cutting speed and is ideally suited for all cross-cutting and miter tasks (-45°/+60°) on tubes, profiles, and solid materials in workshop environments. The fully hydraulic saw feed and hydraulic material clamping enable semi-automatic, precise, and tool-friendly cutting. — Features  • Hydraulically controlled saw feed  • Rotary table as material support  • Hydraulic material clamping  • Infinitely variable cutting speed  • Double-sided miter angle from +60° to -45° — Technical Data  • Dimensions (L × W × H): 760 × 1620 × 2040 mm  • Material support height: 950 mm  • Total weight: 510 kg  • Total power: 2 kW  • Cutting speed: 20 – 110 m/min  • Saw blade dimensions: 3,180 × 27 × 0.9 mm  • Saw band guides: Side and back roller guides, replaceable  • Material clamping: mechanical  • Cutting feed: hydraulic, infinitely adjustable  • Saw blade tension: mechanical  • Saw blade cleaning: rotating, easily replaceable wire brush — Cutting Capacities  • 90° round (solid/tube): 160 / 260 mm  • 90° flat (W × H) (tube): 310 × 260 mm  • 90° square (solid/tube): 160 × 160 / 260 × 260 mm  • +45° round (tube): 220 mm  • +45° flat (W × H) (tube): 200 × 200 mm  • +60° round (tube): 140 mm  • +60° flat (W × H) (tube): 140 × 140 mm  • -45° round (tube): 240 mm  • -45° flat (W × H) (tube): 200 × 260 mm  • -45° square (tube): 210 × 210 mm  • Shortest remnant length: 30 mm — Condition & Delivery The machine is in excellent technical condition and ready for immediate use.  • Shipping on pallet by freight carrier is possible throughout Europe  • More machines available – check our listings for further offers — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices plus VAT, subject to prior sale and errors. Iisdpfsxizabsx Al Nja

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Tip stroja: Polavtomatska tračna žaga z lokom Dimenzije traku: 3510 x 27 x 0,9 mm Iijdpfsxk Ti Rjx Al Nsa Zmogljivost rezanja (pravokotni): 250 x 300 mm Zmogljivost rezanja (okrogli): 250 mm Snožno rezanje: 150 - 250 x 100 - 130 mm Hitrost rezanja: 20 - 80 m/min Moč glavnega pogona: 2,2 kW Moč hidravlične črpalke: 0,75 kW Moč črpalke hladilne tekočine: 0,125 kW Višina mize: 750 mm Teža: 1430 kg Mere (Š x G x V): 2210 x 2290 x 1890 mm

Stanje: zelo dobro (rabljeno), Tehnični podatki: Premer reza okroglega jekla: max. 700 mm Premer reza kvadratnega jekla: max. 800 x 700 mm Iiodpeyan Hdofx Al Nsa List žage: 50 x 1,6 x 7600 mm Hitrost žage: 12 – 80 m/min Največja masa obdelovanca: 12.000 kg NC-krmiljenje Moč motorja: 7,5 kW Dimenzije (dolžina x širina x višina): pribl. 4350 x 2400 x 2700 mm Teža: pribl. 6,5 t Prodajalec ne prevzema odgovornosti za tipkarske napake ali napake pri prenosu podatkov. Stroj je po videzu, tehniki in obrabljenosti primeren svoji starosti; rabljeni stroji se prodajajo brez kakršnega koli jamstva.

Stanje: novo, Leto izdelave: 2026, The BS370H is a robust and reliable semi-automatic bandsaw with miter cutting capabilities from -45° to +60°, featuring hydraulically controlled vice and saw arm. This indispensable machine for any metalworking shop is perfectly suited for cutting tubes, profiles, and solid materials. The blade guides are fitted with special carbide plates and bearings, greatly enhancing blade guidance, longevity, linearity, cutting precision, and quality. Carbide guidance significantly reduces wear on both the machine and the blade. The machine is equipped with a high-performance coolant pump with a closed coolant circuit. Iisdpfxjycqhco Al Nea The machine’s drive is transmitted via a worm gear. It features a three-phase motor with two cutting speeds and motor thermal protection. The bandsaw is equipped with a DIAL TENSIOMETER – a blade tension sensor and an automatic shut-off in the event of blade breakage. The upper part of the base is shaped as a tray for coolant drainage and chip collection during material cutting. The base supports a cast iron worktable with a swiveling arm and control panel located on a separate arm. During the cutting process, the main cutting motion is provided by the moving saw blade, while the feed is achieved by lowering the saw arm. The descent speed of the arm (cutting speed) is adjustable via a hydraulic cylinder. Bandsaw for precise, professional work. Torsion-resistant, rigid arm and frame made from spheroidal cast iron. Dual-sided quick-locking vice. In semi-automatic mode, after pressing START, the hydraulic vice clamps the material, hydraulics lower the saw arm, the end switch signals the cut is complete, and the hydraulics raise the saw arm. Technical specifications Blade size: 3160 x 27 x 0.9 mm Blade tension: mechanical (manual) Blade speeds: 34, 68 m/min Arm descent regulation: stepless – hydraulic cylinder Vice base height: 890 mm Saw wheel diameter: 380 mm Power supply: 3-phase, 400V Total power: 1.5 kW Coolant pump motor power: 46 W Dimensions with base: 1850x950x1500 (2050) mm Weight: 491 kg

Stanje: dober (rabljeno), Leto izdelave: 1982, Cutting capacity 90° circular 320 mm square 320 x 320 mm rectangular 540 x 200 mm Iiedpfx Aljxztfas Nsa Cutting capacity 45° circular 175 mm square 175 x 175 mm rectangular 150 x 270 mm Main motor 1.5 kW Cutting speed, infinitely variable 17 - 120 m/min Saw blade size 3660 x 27 x 0.9 mm Dimensions (L x W x H) 1900 x 1000 x 1200 mm Net weight 410 kg Accessories / Special Features: • Semi-automatic version • Raise and lower the saw bow • Hydraulic saw pressure regulation • Hydraulic material clamping • Automatic opening and closing of clamping jaws • Cutting speed 17 - 120 m/min, continuously adjustable • Automatic cutting pressure regulation • Material stop length 500 mm • Coolant device • Mitre swivel device—entire machine can be easily and quickly swiveled steplessly The workpiece clamping cylinder and the cutting pressure regulator have been newly resealed by us. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Very robust and easy-to-operate semi-automatic hydraulic double miter band saw Hydraulic saw feed and saw pressure can be adjusted separately, Vice can be operated hydraulically and manually, Supplied as standard with two saw band speeds, Swiveling material stop, Coolant system and chip container Main technical data: Isdegk A Rwopfx Al Njia Sawing length up to 260 mm Sawing height up to 220 mm Sawing diameter up to 220 mm Power 1.4 kW Dimensions (LxWxH) 1250x640x1300 mm Also available in other sizes (320 and 450 mm) Request a non-binding offer. We offer delivery, service, spare parts, and saw bands from a single source. Our postcode areas in Germany are 17, 18, 19, 23.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Tehnični podatki: Dvostebrna izvedba Kapaciteta rezanja: 700 x 520 mm Premer reza – okrogel material: maks. 520 mm Premer reza – kvadratni material: maks. 520 x 520 mm Premer reza – pravokotni material: maks. 520 x 520 mm CNC krmiljenje: B&R PP 45 Iisdpfx Aljxlcpvo Nea hidravlično vpenjanje svežnja hidravlično spuščanje brezstopenjsko nastavljiva hitrost žaginega traku premični upravljalni pult z digitalnim prikazom Dolžina žaginega traku: 6640 x 41 x 1,3 mm Hitrost rezanja: 15–90 m/min Delovna višina: 770 mm Moč motorja: 5,5 kW Dimenzije (dolžina x širina x višina): pribl. 3500 x 3000 x 2500 mm Teža: pribl. 5,0 t Oprema: 4 kosi novih žaginih trakov Stanje: Skoraj kot novo Prodajalec ne odgovarja za napake pri pisanju ali prenosu podatkov. Stroj glede videza, tehnike in obrabe ustreza svoji starosti; rabljeni stroji se prodajajo brez kakršnegakoli jamstva.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 1.500 kg, teža obdelovanca (maks.): 250 kg, hitrost rezanja: 75.000 mm/min, dolžina odseka (maks.): 400 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Isdpfx Aeym Ntxjl Noia Oddaja ponudbe zavezuje k pravočasnemu prevzemu, bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! TEHNIČNI PODATKI Dolžina reza: pribl. 400 mm Hitrost reza: do 75 m/min Potisk žage: hidravlični Hitrost spuščanja: 0–250 mm/min Dimenzije tračne žage: 4.100 x 27 x 0,9 mm Maks. masa materiala: 250 kg PODATKI O STROJU Pogon tračne žage: 2,2 kW Hidravlična enota: 0,37 kW Črpalka za hladilno tekočino: 0,12 kW Skupna potrebna moč: min. 2,7 kW Dimenzije in teža Dimenzije (D x Š x V): 2.400 x 2.300 x 1.700 mm Teža: 1.500 kg Zunanja referenca: Lot 17 / Weilheim

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, številka stroja/vozila: 306533, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 350 mm, največja širina rezanja: 610 mm, skupna masa: 550 kg, dolžina tračnega lista: 4.700 mm, TEHNIČNI PODATKI Premer odklonskega kolesa: 630 mm Dimenzije orodja: 13 x 0,65 x 24 ZpZ Dolžina tračne žage: 4.700 mm Višina natovarjanja: 1.065 mm Višina reza: 350 mm Širina reza brez omejevalnika: 610 mm Širina reza z omejevalnikom: 150 mm Hitrost reza: 10 - 100 m/min Hod mize: 600 mm Podajalna hitrost mize: 0,03 - 0,3 m/min PODROBNOSTI O STROJU Premer priključka za odsesavanje: 1 x 120 mm + 1 x 100 mm Potrebna hitrost pretoka: najmanj 25 m/s Potreben volumenski pretok: 1.725 m³/h Dimenzije & Teža Dimenzije (D x Š x V): 1.850 x 1.200 x 2.300 mm Ijdpfoyzy Drjx Al Noia Teža stroja: 550 kg Moč motorja: 0,75 kW Obratovalna napetost: 400 volt / 50 Hz Vrsta toka: 3 x 400 volt Zaščita: maksimalno 16 amperov Minimalni prečni prerez: 1,5 mm²

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 8.000 mm, skupna masa: 13.000 kg, skupna dolžina: 15.000 mm, dolžina tračnega lista: 9.045 mm, širina tračne žage: 160 mm, premer kolesa: 1.250 mm, Horizontalna tračna žaga WRAVOR WRC 1250 AC Visokozmogljiva industrijska žaga s 55 kW motorjem — za razrez hlodov Ø 1250 mm Leto izdelave: 2018 Tehnični podatki: • Glavni motor: 55 kW • Krmiljenje: fiksni komandni pult z PLC Unitronics V-280 • Možnost ročne nastavitve debeline rezanja • Proga (dolžina): 12,5 m • Vpenjalec hlodov: 5 x hidravlični • Hidravlični valji: 5 x • Kotnik (90°): 5 x • Standardni obračalec hlodov: 4 x • Mehanski naslon: 3 x • Predrezilo: 1 x • Izhodni silon trak za transport desk Slike so informativnega značaja. Ijdpfoxwkt Tox Al Njia Kontakt: 00 386 51 222 703

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Rabljena popolnoma avtomatska tračna žaga Beka mak BMSO 320 GLH, leto 2009. Možno tudi rezanje pod kotom. Ijdpfx Alsyrmrpo Nsia

Stanje: rabljeno, Leto izdelave: 2007, Rabljena polavtomatska tračna žaga MACC special 650di Kot reza od -60° do +60° Dimenzije rezila: 5270 x 34 x 1.1 mm Digitalni prikazovalnik kota Kapaciteta reza pri 0° - okroglo 460mm - kvadrat 450x450mm - pravokotnik 620x450mm Teža stroja : 1250kg Iisdpfjyzadlsx Al Noa Stroj je v celoti servisiran.

Stanje: rabljeno, Žagalni stroj, avtomatska žaga, avtomatski rezalni stroj, Adige CM501 – rabljeni stroj Proizvajalec: Adige Model: CM 501 Leto: 1996 Iodpfsy Ayc Dsx Al Neia Premer rezila: 250–360 mm Dolžina reza: 2100 mm Največji premer obdelovanca (okroglo): 85 mm Največja dimenzija obdelovanca (kvadrat): 70 × 70 mm Avtomatski krožni žagalni stroj ADIGE CM501, izdelan leta 1996 v Italiji, je zasnovan za popolnoma avtomatsko rezanje polnih materialov, cevi in profilov iz jekla, medenine, aluminija ter drugih lahkih zlitin v industrijskih proizvodnih okoljih.

Stanje: rabljeno, Leto izdelave: 1994, Rabljeni stroj Leto izdelave: 1994 Oprema in tehnični podatki: Premer valja 500 mm Motor 1,8 kW Priklop 430 V zgornje precizno vodenje spodnje vodenje teleskopska zaščita rezila kolesa tračne žage iz litega železa litoželezna miza nastavljiva do 36° Iiodpfey D A Tzex Al Nea s samodejno zavoro motorja prikazovalnik napetosti rezila maks. višina reza 260 mm maks. širina reza 480 mm priključek za odsesavanje 100 mm D x Š x V 965 x 660 x 1925 mm Teža 280 kg Razpoložljivost: takoj Lokacija: Röllbach

Stanje: delavnici obnovljeno (rabljeno), Rabljena polavtomatska tračna žaga MEP Shark 281 sxi evo Trije načini delovanja: Polavtomatsko, ročno in ročno dinamično (gravitacijsko) Dimenzije žaginega lista: 2950 x 27 x 0,9 mm Dve hitrosti rezila: 36/72 m/min Max odptje primeža: 285mm Kapaciteta reza: pri 0° okroglo 250mm, pravokotnik 280x200mm pri 45°okroglo 190mm, pravokotnik 180x180mm Pri 60° okroglo 120mm, pravokotnik 110x110mm Letnik 2006 Teža:435Kg Isdpfoyyn Suex Al Neia V celoti servisirana.

Stanje: skoraj kot novo (rabljeno), Naprodaj je rabljena tračna žaga Record Power BS 300 E s širino reza 305 mm. Žaga je v skoraj novem stanju in jo je pregledalo ter obnovilo naše strokovno osebje. (Popolnoma funkcionalna) Tehnični podatki: - Višina reza: 190 mm - Širina reza: 305 mm - Dolžina tračnega lista: 2370 mm - Širina lista: 8-15 mm Iedeyx Dalopfx Al Nsia - Nagibna miza 90-45° - vključno s podstavkom s kolesi Tračna žaga se nahaja v kraju A-8561 Söding in je na voljo za ogled v času delovnih ur. Možnost predčasne prodaje! Ključne besede: tračna žaga, žage, žaga, tračna rezila Referenca: R-AT0EF

Stanje: rabljeno, Leto izdelave: 2023, Display Machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Model: GABBIANI P80 Year: 2023 1.00 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY GUARDS: MORE WORKING SPACE FLOATING CLAMPS: GUARANTEED PERFECT CUTTING TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Number of standard clamps 5 Number of clamps for versions 33/38/43 9 / 10 / 10 Number of clamps for versions 33/38/43 with FlexCut 1 unit (single clamp with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz RPM 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING UNIT Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz RPM 5850 Scoring blade diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power kW 12÷15 Machine voltage Euro voltage (400 V / 50 hz) Compressed air requirement NL/min 300 Required air pressure bar 7 Extraction air flow rate m3/h 2440 Extraction air speed m/sec 20 Extraction nozzle diameter mm 4x120 () Note: For countries where EC directives apply, the forward feed speed of the pusher is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel saw with PC/PLC control, for cutting panels from solid wood, MDF, chipboard, plywood and similar materials. Machine frame and working table - Machine frame constructed from steel tubing - Working table made of ribbed, reinforced steel with bakelite coating - Longitudinal fence on the left sideSaw carriage made of steel, consisting of - one motor for the main saw blade and one for the scoring blade - Vertical lift of saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure optimum cutting quality - Travel direction against the longitudinal fence - Saw carriage drive by rack and pinion - Carriage guidance on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year warranty), protected by special dust wipers - Pneumatic switch for quick and safe main/blade changingPressure beam - Pressure beam applies even pressure to the workpiece over the entire cut length with cutouts to avoid collisions with the clamps; pneumatic height adjustment on high-precision racks and pinions, pressure adjustable 1.5-6 bar - Dual extraction system with a unit above the pressure beam for cleaning the worktable and one below on the saw carriage – Side automatic aligner with pneumatic cylinder along the entire length. Slide on linear ball bearing guides and shoes. * Travel distance: 1200 mm * Minimum working width: 60 mm * Maximum working width: 1200 mmPositioning pusher and rear part of the machine - Positioning pusher along the entire length driven by robust shaft. Positioning pusher movem... Isdpfx Alex Twcve Neia

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Rabljena avtomatska tračna žaga MEP Shark 332 nc 5.0 Dimenzije lista: 3320x27x0,9mm Kot reza od: -45° do +60° Rezalna hitrost lista: od 15 - 100m/min Kapciteta reza pri 0°: - okroglo 300mm - kvadrat 260mm - pravokotnik 330x260mm Štirje načini delovanja: ročno , polavtomatsko dinamično, polavtomatsko in avtomatsko Leto izdelave: 2017 Teža stroja: 1150kg Dodatna oprema: - poseben primež za zmanjšanje ostankov Iiodpfx Ajxz Ulbsl Noa - KIT IoT Industry 4,0 Ready Stroj je kot nov. Ima samo 515 delovnih ur.