Tračna žaga

HEMA UH 630/L

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, številka stroja/vozila: 306533, Technical Data of the Machine Technical Specifications Machine length: approx. 1850 mm Machine width: approx. 1200 mm Machine height: approx. 2300 mm Machine weight: approx. 550 kg Deflection pulley diameter: 630 mm Tool dimensions: 13 x 0.65 x 24 TPI Band saw blade length: 4700 mm Loading height: 1065 mm Cutting height: 350 mm Cutting width without fence: approx. 610 mm Cutting width with fence: 150 mm Motor power: 0.75 kW Cutting speed: 10 – 100 m/min Table travel: approx. 600 mm Table feed speed: 0.03 – 0.3 m/min Extraction connection diameter: 1 x Ø 120 mm + 1 x Ø 100 mm Required air velocity: min. 25 m/s Required air flow rate: 1725 m³/h Electrical Connection Operating voltage: 400 Volt / 50 Hz Power supply: 3 x 400 Volt Protection: max. 16 amperes Minimum cable cross-section: 1.5 mm² Kjdpfx Agjwm Du Eofjnb

Stanje: dober (rabljeno), Leto izdelave: 1969, Wood band saw, band saw machine, band saw, vertical band saw - Manufacturer: Hema Paul & Gotthilf Heermann, vertical band saw - Model: unfortunately without model designation - Drive: 4 kW - Cutting width: max. 785 mm - Cutting height: max. 475 mm - Saw blade length: 5600 mm - Worktable: tiltable Knsdpfsh N Thwjx Agfeb - Drive motor with brake - Dimensions: 1600/1020/H2430 mm - Total weight: 794 kg

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available - Knedpfx Agoi Dfidefsb

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, 4 speeds: 3000/6000/4500/9000 rpm. Clockwise/anticlockwise rotation Knjdpsittnzjfx Agfsb Spindle locking via foot pedal Milling fence with fine adjustment Spindle diameter: 30 mm Extraction ports top & bottom, each 120 mm Spindle wrench Open-end wrench 41 mm Power cable & 16 Amp plug.

Leto izdelave: 2026, stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: • Accessible from all 4 sides Ksdofyadbopfx Agfjnb • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid • Funnel-shaped air guidance to the suction port Technical specifications: • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Stanje: rabljeno, Leto izdelave: 1997, vklj. 3-valjnim pomikom Motor: 2,2 kW električna oscilacija Hitrost traku: ca. 22 m/s Višinsko nastavljiva brusilna miza Velikost mize: 1000 x 350 mm Brezstopenjsko nagibna brusilna enota od 0 - 45° Kotna skala in mehanska zapora Preklopna naprava za brušenje furnirnih robov Aluminijasta brusna čevelj Višinsko nastavljiva radijska brusilna miza Centralni priključek za odsesavanje: DM 140 mm Brusni trak: 3000 x 150 mm Skladišče: Nattheim Ksdpfx Aoy Dd Igsgfsnb

Stanje: novo, Leto izdelave: 2022, Working width: 630 mm Planing height: 300 mm Knedpfx Ajhpl T Hogfsb Cutterhead: Tersa Number of knives: 4 Height adjustment: electric Planing thickness display: mechanical counter Feed speed: 7-11-15-19 m/min Infeed roller: segmented steel Pressure bar: segmented Outfeed roller: rubber Table rollers: no Table extension: yes, infeed and outfeed Motor power: 7.5 kW Extraction connection: 160 mm Machine length: 1070 mm Machine width: 900 mm Weight: 750 kg

Stanje: dober (rabljeno), Leto izdelave: 2003, Processing of posts, boards, and battens at the ends for tear-free machining. With a magazine that operates automatically. Knodpfxsgmt Ere Agfsb 2 milling spindles move independently from the outside toward the center to prevent tear-out.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: diverse, The Professional for Cross-Cutting, Mitre, and Compound Cuts The ZS 200 N is optimally suited for cross-cutting, mitre, and compound cuts. Materials such as wood, PVC, and aluminium profiles can be machined cleanly and precisely. The saw unit runs on a hardened guide arm and can be swung horizontally to mitre on both sides. The 'N' stands for inclination, indicating that the saw unit can also be tilted vertically to the side — allowing for easy compound cuts. ZS 200 N Fact Check - Crosscut and mitre circular saw with a maximum cutting height of 200 mm - Robust grey cast iron construction - Precision ball bearing guidance of the tool carriage on hardened and ground steel shafts - Manual saw feed - Rapid mitre adjustment up to 65° horizontally and up to 60° vertically - Re-adjustable fixed stops, lower saw blade guard - Can be connected to an extraction system - Machine can be tilted to both sides from the front - Hydraulic feed brake Technical Specifications: - Motor: 400 V / 5.0 kW - Speed: 2800 rpm - Cutting length: 420 mm (at 90°) - Cutting height: 200 mm (at 90°) Knsdsh Nu Iuspfx Agfjb - Mitre range horizontal: 45°-90°-25° - Mitre range vertical: 60°-90°-30° - Saw blade diameter: 520 mm - Weight: 310 kg Scope of Delivery: - Crosscut and compound saw ZS 200 N - Machine stand - Machine tiltable to both sides from the front - Hydraulic feed brake - Circular saw blade HM Z 60 neg. - Operating tools and hand crank

Leto izdelave: 1991, stanje: dober (rabljeno), Underslung panel saw, crosscut saw, sliding table saw, mitre saw, panel saw, table saw, circular saw, panel cutting saw - Manufacturer: Altendorf, format sliding table saw type TKR 45 - Main motor: Bauknecht 5.5 kW with brake - Scoring motor: Emod 0.75 kW - Speed: 3000/4000/5000 rpm - Saw blade: Ø 300 mm / max. Ø 350 mm - Max. cutting height: 95 mm at 90° / 70 mm at 45° - Mitre cut: up to 45° - Cutting width: 2250 mm - Table length: 1400 mm - Overall dimensions: 3480/1530/H1370 mm - Weight: 1104 kg Knodpfx Agemydmbjfeb