Hesse By Beka-Mak Bmsy 1020 C nakup rabljenega (63.102)

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €46,300 Leasing rate: €884.33 Bending length: 2,050 mm Max. bending capacity – mild steel: 11 mm Max. plate thickness without pre-bending at D=5x top roll: 11 mm Max. plate thickness without pre-bending at D=1.5x top roll: 9 mm Max. plate thickness with pre-bending at D=5x top roll: 9 mm Max. plate thickness with pre-bending at D=1.5x top roll: 7 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,400 mm Width: 1,150 mm Height: 1,250 mm Weight: 4,080 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox; bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Gbodpfx Abjyb Szujrju Overload protection Mobile control panel Equipment compliant with CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of nominal capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €49,900 Gbodpfx Aboyb Sydorou Leasing rate: €953.09 Bending length: 2050 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness, pre-bending at D=5x top roll: 13 mm Max. sheet thickness, pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness, with pre-bending at D=5x top rolls: 10 mm Max. sheet thickness, with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1470 mm Weight: 5450 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, bottom roll drive by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic relief of the top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment compliant with CE specifications OPTIONS: Stepless variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Max. bending capacity - structural steel: 13 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Gbjdpfx Ajyb Sy Robrsu Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll relief Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulation OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum plate thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Leto izdelave: 2026, Condition: New Year of manufacture: 2026 Stock number: 090180 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €8,300 Leasing rate: €160.19 In stock: 1 Gedjwiqm Topfx Abrsbu Shaft diameter: 50 mm Top roller diameter: 152 mm Bottom roller diameter: 162 mm Driven rollers: 3 Motor power: 1.1 kW Speed: 4.5 m/min Flat bar, upright (cross-section / min. diameter): 60x10 mm / 600 mm; 20x10 Flat bar, flat (cross-section / min. diameter): 100x15 mm / 600 mm; 50x Square bar (cross-section / min. diameter): 35x35 mm / 600 mm; 15x15 Round bar (cross-section / min. diameter): 35 mm / 600 mm; Ø 20 mm Tube (cross-section / min. diameter): 70x2 mm / 1200 mm; Ø 25 Rectangular tube, upright (cross-section / min. diameter): 70x30x3 mm / 1500 mm; 30x Square tube (cross-section / min. diameter): 50x50x3 mm / 1600 mm; 20x Angle steel, legs outside (cross-section / min. diameter): 50x50x6 mm / 600 mm; 30x3 Angle steel, legs inside (cross-section / min. diameter): 50x50x6 mm / 900 mm; 30x3 Length: 810 mm Width: 950 mm Height: 1500 mm Weight: 500 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of top roller Hardened universal rollers Side guide rolls adjustable manually on one axis Usable horizontally and vertically Foot pedal for forward and reverse operation Machine and equipment in accordance with CE regulations Operating instructions in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Gjdpfx Abeypbqusrebu Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roller: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 10 mm Max. sheet thickness with pre-bending at D=5x top rollers: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 8 mm Top roller diameter: 220 mm Lower roller diameter: 200 mm Side roller diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4-roll design Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll lifting Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Godpfoynmx Isx Abrsbu Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,900 Leasing rate: €1,056.51 Bending length: 3,100 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roller: 8 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 7 mm Max. sheet thickness with pre-bending at D=5x top roller: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 5 mm Top roller diameter: 245 mm Bottom roller diameter: 245 mm Side roller diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,850 kg 4 rollers Top roller drive via hydromotor and planetary gearbox, bottom roller drive via gear and cardan shaft Hydraulic adjustment of bottom and side rollers Digital readout for bottom and side roller positions Hardened rollers Cone bending device Hydraulic relief for top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel CE-compliant equipment OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control Gedpfxoyb Sz Is Abrebu IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4800 mm Width: 1600 mm Gbodpfx Aeyb Syksbrou Height: 1470 mm Weight: 6170 kg 4 rollers Top roll drive via hydraulic motor and planetary gearbox; bottom roll driven via gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for position of bottom and side rolls Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment conforms to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the rated capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov od naročila Država izvora: Turčija Cena: 12.950 € Leasing obrok: 248,64 € Debelina pločevine - konstrukcijsko jeklo: 0,4 - 2 mm Maks. širina pločevine: 300 mm Maks. prečni prerez: 300 mm² Premer podajalnih valjev: 63 mm Podajalna hitrost: 150 m/min Podajalno pospeševanje: 10 m/s² Godpfoynnchsx Abrsbu Pnevmatski sistem FESTO Servopogon in krmiljenje SIEMENS 7'' barvni zaslon na dotik SIEMENS 2 podajalna valja OPCIJA: Ročni volan in Simlinx modul za daljinsko vzdrževanje: 4.290 €

Stanje: novo, Zustanje novo Dobavni rok cca. 14 - 16 tednov od naročila Država izvora Turčija Cena 81.500 € Leasing obrok 1.540,35 € Maks. debelina pločevine – konstrukcijsko jeklo 8 mm Maks. debelina pločevine – nerjaveče jeklo 5 mm Maks. robni polmer 80 mm Min. robni polmer 10 mm Maks. premer diska 4.500 mm Min. premer diska 720 mm Maks. višina roba 95 (R 80) / 35 (R 25) mm Motor 11 kW Dolžina 4.900 mm Širina 1.700 mm Višina 2.700 mm Teža 4.550 kg Vključuje robne valje za konstrukcijsko jeklo (R25) Vključuje rezila Ena hitrost (70 min⁻¹) z možnostjo nastavitve največjega navora Pogonski zgornji in spodnji valj z neodvisnimi hidravličnimi motorji ter planetnim reduktorjem Možno obdelovati ravna in konveksna dno Hidravlično nastavljiva višina dna Gbsdsyq Svkjpfx Abrju Postopek rezanja in robljenja na istem glavi Stranske podporne valje Upravljanje prek zaslona na dotik Možnosti kot so fiksni in nastavljivi nosilci stožcev, adapterji za manjše premere, rezila za nerjaveče jeklo ali večje hitrosti … po povpraševanju.

Stanje: novo, Stanje: novo Dobavni rok: približno 12 tednov od oddaje naročila Država izvora: Turčija Cena: 72.300 € Mesečni obrok ob finančnem lizingu: 1.366,47 € Sila upogibanja: 40 ton Dolžina upogiba: 1250 mm Osi: Y1 / Y2 / X in R os Gib: 200 mm Razdalja med stojali: 1050 mm Izstop v stranskem stojalu: 250 mm Višina vgraje: 440 mm Pogon: servomotorna vretenčna enota Hitrost hitrega giba osi Y: 115 mm/s Delovna hitrost osi Y: 10 mm/s Hitrost umika osi Y: 115 mm/s Zadnji omejevalnik, gib osi X: 650 mm Zadnji omejevalnik, gib osi R: 250 mm Višina mize: 1000 mm Moč motorja: 7,2 kW Dolžina: 1950 mm Širina: 1450 mm Višina: 2650 mm Teža: 3600 kg SERIJSKA OPREMA: Servomotorna vretenčna enota 4 osi (Y1, Y2, X in R) Barvna grafična upravljalna enota DELEM DA-66S - 17" barvni zaslon na dotik - 3D-vizualizacija v simulaciji in proizvodnji - Primerno za celotne aplikacije Windows - Združljivo z DelemModusys - USB- in periferni vmesnik - Podpora za uporabniško specifične aplikacije - Vmesnik za senzorje, upogibanje in korekcijo Servomotorno gnani zadnji omejevalnik na linearnih vodilih in krogličnih vretenih Gbedpfx Abjynm Ayjreu CNC-upravljano izbočevanje Zgornje orodje 1010/A/75°, razdeljeno in upognjeno 4-V matrica 60x60 2009 (V = 16, 22, 35 in 50 mm) Laserska zaščitna naprava Fiessler AKASam, nameščena na zgornji prečki Nosilci za pločevino na linearnih vodilih Oprema v skladu s standardi CE Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI PREDNOSTI TE IZVEDBE: - višja produktivnost v primerjavi s klasičnimi hidravličnimi upogibnimi presami - skoraj brezčasen odziv na signal stopalke - nizka poraba energije - kompaktna pogonska vretenčna enota z majhnim številom komponent - brez hidravličnih komponent Možnosti: Osi Z1/Z2 CNC-upravljalna enota DELEM DA-69S 3D vključno z PC-programsko opremo Profile-S s funkcijo uvoza 3D-datotek Hitra sponka za zgornje orodje

Stanje: novo, Stanje novo Rok isporuke cca. 12-14 nedelja od porudžbine Zemlja porekla Slovačka Cena 28.300 € Leasing rata 540,53 € Pritisna snaga 40 t Dužina savijanja 2000 mm Ose X i Y osa Hod 100 mm Ugradbena visina 310 mm Pogonski koncept hidraulični Rezervoar za ulje 38 l Motor 6 kW Godpfx Abeynm A Tersbu Dužina 2500 mm Širina 1200 mm Visina 1900 mm Težina 2100 kg Zadnji graničnik 420 mm Matrica 1 Brzina 10 mm/s Brzina povlačenja 12 mm/s Brzina zadnjeg graničnika 40 mm/s Preciznost pritisne grede +/-0,02 mm Preciznost zadnjeg graničnika +/-0,05 mm 2 ose (Y i X) Motorni zadnji graničnik sa tasterom i ručnim finim podešavanjem sa brojačem Dubina presovanja Y i gornja mrtva tačka preko kontrolera za predizbor Međuprsten sa polugom za brzo stezanje za stezanje gornjeg alata Gornji alat 1010/75/R0,8/105 1x835 mm + 1x835 mm podeljeno Matrica 2009/85° (V16/22/35/50 mm) 1x835 mm + 1x835 mm podeljeno 2 ruke za podupiranje lima Oprema u skladu sa CE normama Ulje uključeno Uputstvo za upotrebu na nemačkom

Stanje: novo, Stanje novo Dobavni rok cca 12 tednov od naročila Država izvora Turčija Cena 29.000 € Leasing obrok 553,9 € Upogibna dolžina 2.050 mm Najv. upogibna zmogljivost - konstrukcijsko jeklo 4 mm Najv. debelina pločevine brez pregiba pri D=5x zgornji valj 4 mm Najv. debelina pločevine brez pregiba pri D=1,5x zgornji valj 3 mm Najv. debelina pločevine s pregibom pri D=5x zgornji valji 3 mm Najv. debelina pločevine s pregibom pri D=1,5x zgornji valj 2 mm Premer zgornjega valja 130 mm Premer spodnjega valja 130 mm Premer stranskih valjev 130 mm Hitrost valjanja 5 m/min Motor 2,2 + 1,1 kW Dolžina 3.800 mm Gsdsyb Sy Depfx Abrobu Širina 1.150 mm Višina 1.110 mm Teža 2.450 kg Motoriziran pogon valjev Pogonjen zgornji in spodnji valj Hidravlično nastavljivi stranski valji 3 digitalni prikazovalniki Hidravlična odklopna ležišča Kaljeni valji Nastavek za stožčasto upogibanje Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI MOŽNOSTI (CENE NA POVPRAŠEVANJE): Zgornja podpora Stranska podpora Spremenljiva hitrost NC krmiljenje

Stanje: novo, Leto izdelave: 2026, Stanje: novo Leto izdelave: 2026 Inventarna številka: 070168 Dobava: takojšnja, vmesna prodaja možna Država izvora: Turčija Cena: 10.900 € Leasing obrok: 209,28 € Gjdewirt Ispfx Abrobu Na zalogi: 1 kos Tlačna sila: 150 t Cilinder fiksen ali premakljiv, horizontalno pomičen Hod: 300 mm Prosta razdalja med stebri: 1.070 mm Premer bata: 280x200 mm Delovna hitrost: 5 mm/s Povratna hitrost: 10 mm/s Dolžina: 2.110 mm Širina: 1.000 mm Višina: 2.480 mm Teža: 1.870 kg S horizontalno pomičnim cilindrom z vpenjalno ročico Jeklena varjena konstrukcija Poljubna pozicija zaustavitve Manometer Varnostni ventil proti preobremenitvi 2 V-prizme Miza nastavljiva po višini Dviganje/spuščanje mize Krmiljenje z upravljalno ročko Opremljeno v skladu s CE predpisi Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity – mild steel: 10 mm Max. plate thickness without pre-bending (at D = 5x top roll): 10 mm Max. plate thickness without pre-bending (at D = 1.5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 1.5x top roll): 6 mm Top roll diameter: 200 – 220 mm Lower roll diameter: 200 – 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Gbjdpoynmyfofx Abrsu Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gears and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be a maximum of 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 14–16 weeks from order Country of origin: Turkey Price: €28,800 Leasing rate: €550.08 Press force: 20 t Nominal press force at 1.7 mm Table length: 360 mm Table width: 550 mm Pass-through hole in table: 140 mm Stroke length: 1–50 mm Strokes per minute: 160 1/min Ram guides: 4 Ram adjustment: 40 mm Ram bore: 35 mm Throat depth: 200 mm Installation height: 240 mm Motor: 2.2 kW Length: 1,360 mm Width: 1,100 mm Height: 1,860 mm Weight: 1,250 kg Gbedpfowiry Ujx Abrsu Welded steel frame construction 4-way ram guide Pneumatic clutch/brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Setup mode * Two-hand actuation * Foot actuation * 2-cycle operation via light barriers * Continuous operation Touchscreen for: * Stroke counter with preset for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor rotation direction * Monitoring of inputs and outputs 2 free cams for peripheral connection Automatic central lubrication Equipment according to CE regulations OPTION: Vibration pads €132,--

Stanje: novo, Stanje novo Dobavni rok približno 10 tednov od naročila Država izvora Turčija Cena 106.178 € Leasing rata 2.006,76 € Tlačna sila 175 t Upogibna dolžina 3050 mm Osi Y1 / Y2 / X / R os Hod 265 mm Razmak med stojali 2.600 mm Prostornina pri stranskem stojalu 410 mm Višina vgradnje 530 mm Pogon hidravlični Hitri pomik Y-os 200 mm/s Delovna hitrost Y-os 10 mm/s Povratna hitrost Y-os 200 mm/s Pomik zadnjega naslona X-os 650 mm Hitrost zadnjega naslona X-os 500 mm/s Pomik zadnjega naslona R-os 250 mm Višina mize 900 mm Širina mize 104 mm Motor 2 x 4 kW Dolžina 4.250 mm Širina 1.700 mm Gjdpowirtbjfx Abrjbu Višina 2.750 mm Teža 10.900 kg Vsak valj ima svoj servomotor in črpalko 4 osi (Y1, Y2, X in R) CNC krmiljenje DELEM DA-66 S - 2D grafični način programiranja na dotik - 3D prikaz stroja, v simulaciji in proizvodnji - 24" visoko ločljiv barvni TFT zaslon - Združljivost Delem Modusys (razširljivost in prilagodljivost modulov) - USB in druge periferne vmesnike - Podpora za uporabniške aplikacije v multitasking okolju krmiljenja - Vmesnik za senzor upogibanja in korekcije - Offline programska oprema Profil-S2D Servomotorni pogon zadnjega naslona na linearnih vodilih in krogličnih vretenih Naslonske blokade na zadnjem naslonu na dvojnih linearnih vodilih CNC vodeno bombiranje Zgornje orodje 1010/A/75°, segmentirano in zamaknjeno 4-V matrica blok 60x60 2009 (V=16, 22, 35 in 50 mm) Laserska zaščita Fiessler AKAS, montirana na zgornji prečki Ročice za polaganje pločevine na linearnih vodilih Oprema skladna s CE predpisi Polnjenje z oljem Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI PREDNOSTI TE KONSTRUKCIJE: - Hidravlika deluje samo med gibanjem zgornje prečke - Nizka poraba energije - Nizka raven hrupa - Visoka hitrost DODATNE MOŽNOSTI: CNC krmiljenje DELEM DA-69S 3D vklj. s programsko opremo Profile-S in možnostjo uvoza 3D datotek Dodatne možnosti, npr. pnevmatska ali hidravlična pritrditev orodja na zahtevo

Stanje: novo, Leto izdelave: 2026, Stanje novo Leto izdelave 2026 Številka zaloge 090202 Dobavni rok takoj, vmesna prodaja pridržana Država izvora Turčija Cena 3.600 € Na zalogi 1 kos Najv. debelina pločevine – konstrukcijsko jeklo 1,2 mm Iztek 100 mm Dolžina osi 140 mm Število orodij 8 kos Premer valja 62 mm Motor 0,75 kW Hitrost vrtenja 32 obr/min Dolžina 900 mm Širina 450 mm Višina 1350 mm Teža 135 kg Gbodpfjwirx Dsx Abrju Stabilno litoželezno ohišje Motor z zavoro Nožni pedal Nastavljivi spodnji valj 8 kompletov valjev Podstavek Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Godpfx Ajynmzpebrsbu Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity - structural steel: 9 mm Max. plate thickness without pre-bending at D=5x upper roll: 9 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 7 mm Max. plate thickness with pre-bending at D=5x upper roll: 7 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Stanje: novo Številka na zalogi: 080244 Dobavni rok: november 2026 Država izvora: Slovaška Cena: 26.400 € Mesečni obrok ob finančnem lizingu: 504,24 € Sila pritiska: 40 ton Dolžina upogiba: 1500 mm Osi: X in Y os Gib: 100 mm Vgradna višina: 310 mm Način pogona: hidravlični Rezervoar za olje: 38 l Motor: 6 kW Dolžina: 2000 mm Širina: 950 mm Višina: 1900 mm Teža: 1800 kg Zadnji oporni člen: 420 mm Matrica 1 Hitrost: 10 mm/s Hitrost povratka: 12 mm/s Hitrost zadnjega opornega člena: 40 mm/s Natančnost pritiskalne letve: 0,02 +/- mm Natančnost zadnjega opornega člena: 0,05 +/- mm 2 osi (Y in X) Motoriziran zadnji oporni člen s pritiskom gumba in ročno fino nastavitev z merilnikom Globina pritiska Y in zgornja mrtva točka prek prednastavitvenega upravljanja Vmesni del s hitrim sponko za pritrditev zgornjega orodja Zgornje orodje: 1010/75/R0,8/105 1x835 mm + 1x835 mm (razdeljeno) Matrica: 2009/85° (V16/22/35/50 mm) 1x835 mm + 1x835 mm (razdeljeno) Godpjwiqnqsfx Abrobu 2 podpirali za pločevine Oprema v skladu s predpisi CE Napolnjeno z oljem Navodila za uporabo v NEMŠČINI

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity Gbsdpfx Aboypbp Dsreu The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: Approx. 12–14 weeks from order Country of origin: Turkey Price: €76,820 Leasing rate: €1,451.90 Pressing force: 160 tons Bending length: 4,050 mm Gsdpfx Abewird Hjrjbu Axes: Y1 / Y2 and X axis Stroke: 200 mm Distance between uprights: 3,600 mm Throat depth: 300 mm (side frame) Installation height: 430 mm Drive concept: Hydraulic Rapid traverse speed Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge travel X-axis: 620 mm Backgauge speed X-axis: 250 mm/s Table height: 858 mm Table width: 104 mm Motor power: 15 kW Length: 4,850 mm Width: 1,900 mm Height: 2,610 mm Weight: 10,500 kg 3 axes (Y1, Y2 and X axis) CNC CONTROL DT-10: - 10" 2D graphical display - Intuitive touch-screen operation (easy drawing of the bending contour by finger) - User-friendly dialogue-based programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet metal blank - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software allows programs to be written on a PC and then transferred to the machine by USB CNC-controlled backgauge with linear guides and ball screw spindles CNC-controlled crowning Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Fiessler AKAS laser safety device mounted on upper beam Sheet support arms Side and rear safety guards Equipment compliant with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model thanks to serial production of standardized models without any compromise on quality and accuracy OPTIONAL: CNC-controlled R-axis (X adjustment range = 500 mm) DBend, 3D CAD/CAM import and simulation software (supports step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €88,113 Leasing rate: €1,665.34 Pressing force: 220 t Bending length: 3,050 mm Axes: Y1 / Y2 / X axis Stroke: 265 mm Distance between uprights: 2,600 mm Throat depth: 450 mm (side frame) Installation height: 530 mm Drive system: hydraulic Rapid traverse Y-axis: 140 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 250 l Motor power: 22 kW Length: 4,250 mm Width: 1,770 mm Height: 3,000 mm Weight: 12,600 kg Standard equipment: – 3 axes (Y1, Y2, X) – CNC control DT-15 - 2D graphic display 15” - Intuitive touch-screen operation (easy drawing of bending contour with finger) - User-friendly dialog-based programming - Automatic bending sequence calculation - Automatic calculation of developed length for sheet cutting - Graphic product and tool memory Gsdpfx Ajwiqudobrsbu - Correction options - USB ports for backup and program transfer - PC software allowing programs to be written on PC and then transferred to the machine via USB – Servo-driven backgauge on linear guides and ballscrews – Backgauge finger blocks on double linear guides – CNC-controlled crowning – Upper tool 1010/A/75°, segmented and offset – 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) – Laser safety device Fiessler AKAS mounted on upper beam – Sheet support arms on linear guides – Equipment according to CE directives – Oil filling – Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S SERIES: – Greater stroke, installation height, and throat depth – Higher approach and return speeds of the upper beam – Increased backgauge speed – Backgauge fingers mounted on double, not single, linear guides – More available options, e.g., additional backgauge axes (such as Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem configuration, alternative CNC controls, etc. OPTIONS: – R-axis – R/Z1/Z2 axes – CNC control Delem DA66 S – CNC control DELEM DA-69S 3D incl. PC software Profile-S with import function for 3D files – Hydraulic or pneumatic tool clamping for Euro or Wila tooling

Stanje: novo, Stanje novo Dobavni rok cca 12 tednov od naročila Država porekla Turčija Cena 43.000 € Leasing obrok 821,3 € Dolžina upogibanja 2050 mm Maks. zmogljivost upogibanja – konstrukcijsko jeklo 10 mm Maks. debelina pločevine brez predupogiba – konstrukcijsko jeklo 10 mm Maks. debelina pločevine s predupogibom – konstrukcijsko jeklo 8 mm Maks. debelina pločevine brez predupogiba pri D=5x zgornji valj 10 mm Maks. debelina pločevine brez predupogiba pri D=1,5x zgornji valj 8 mm Maks. debelina pločevine s predupogibom pri D=5x zgornji valj 8 mm Maks. debelina pločevine s predupogibom pri D=1,5x zgornji valj 6 mm Premer zgornjega valja 200 mm Premer spodnjega valja 200 mm Premer stranskega valja 180 mm Gbsdpfx Ajyb S Arjbrou Hitrost valjanja 6 m/min Dolžina 3850 mm Širina 1350 mm Višina 1290 mm Teža 3750 kg Motoriziran pogon valjev Zgornji in spodnji valj poganjana Hidravlično pozicioniranje stranskih valjev 3 digitalni prikazovalniki Hidravlične odklopne ležaje Kaljeni valji Stožčasta upogibna naprava Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI OPCIJE (CENE NA ZAHTEVO): Zgornja podpora Stranska podpora Spremenljiva hitrost NC krmiljenje

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2,050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness without pre-bending at D=5x top roll: 6 mm Max. plate thickness without pre-bending at D=1.5x top roll: 4 mm Max. plate thickness with pre-bending at D=5x top roll: 4 mm Max. plate thickness with pre-bending at D=1.5x top roll: 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4,250 mm Width: 960 mm Height: 1,100 mm Weight: 2,800 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended Gbsdpfxoyb Szbs Abreu