Heinen Ct15(Reduced) nakup rabljenega (2.802)

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min Hedexy Tmnjpfx Ahuenl · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Chip conveyor 1 Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface HSK 63F 18 kW inverter, stepless, constant power output Max. rotation: B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 3.150 obr/min, Premer palice (maks.): 32 mm, skupna masa: 8.300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, normal, total/travel distance: 100 / 80 mm Longitudinal slide travel, special, total/travel distance: 145 / 115 mm Cross slide travel, upper slide, total/travel distance: 50 / 33 mm Cross slide travel, middle slide, total/travel distance: 50 / 30 mm Hnjdey R N I Eopfx Ahuel Cross slide travel, lower slide, total/travel distance: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, normal: 60–425 Workpiece revolutions per operation, short: 33.5–236 Workpiece revolutions per operation, long: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Packaged machine space requirement: 15 m³ EQUIPMENT Collets Holders Additional accessories

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: LGFB202503-3308, skupna masa: 660 kg, skupna dolžina: 1.300 mm, skupna širina: 1.000 mm, skupna višina: 1.366 mm, vrsta hlajenja: zrak, barva: siv, izhodna napetost: 400 V, Izhodni tok: 83 A, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, Oprema: CE označba, Na voljo je tipska ploščica, dokumentacija / priročnik, Naprodaj je profesionalni vijačni kompresor INVERTER REM Power EPM 450/10 bar VSI 400V, primeren za industrijsko proizvodnjo in večje obrtne delavnice, kjer je potrebna oskrba s stisnjenim oziroma suhim zrakom. Model deluje pri tlaku 10 bar, ima moč 45 kW, pretok zraka 7,38 m³/min in napajanje 400 V / 50 Hz. Opremljen je z vgrajenim frekvenčnim regulatrojem obratov- INVERTER. Hnodey Dqkbopfx Ahusl Oprema vključuje mehki zagon elektromotorja, kontrolo smeri vrtenja motorja, kakovostno vijačno enoto, elektronsko krmilno enoto in zvočno izolirano ohišje za nižjo raven hrupa. Zaščitni razred je IP55. Kratka tehnična vrstica 10 bar | 7,38 m³/min | 45 kW | 400 V / 50 Hz | IP55 | INVERTER - frekvenčni regulator obratov.

Stanje: rabljeno, Leto izdelave: 2023, Stanje: polovno Godina proizvodnje: 2023 Broj lagera: 6246 Rok isporuke: odmah, prodato između Zemlja porekla: Italija Cena: 2.970 € Na lageru: 1 Prečnik testere: 300 mm Dimenzije testere: 300 x (2)2,5 x 32 mm Brzina testere: 33/66 o/min Nagib ulevo: 45° Nagib udesno: 45° Kapacitet rezanja 0° okruglo: 102 mm, kvadratni profil Kapacitet rezanja 45° desno okruglo: 90 mm, kvadratni profil Kapacitet rezanja 45° levo okruglo: 80 mm, kvadratni profil Širina: 500 mm Dubina: 1050 mm Visina: 990 mm Težina: 135 kg Mašina za prezentaciju / stanje kao novo Cena bez PDV-a Stezni držač sa brzim ručnim stezaljkom i dodatnom desnom steznom letvom za smanjenu ivicu reza Reduktorski menjač i spojka za zaštitu menjača i testera Uređaj za hlađenje Zaštita testere Graničnik materijala Postolje Hnjdsy Dh Ikspfx Ahujl 1 kom testera Uputstvo za upotrebu na nemačkom jeziku

Stanje: novo, prevoženi kilometri: 10 km, moč: 129 kW (175,39 KM), vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, prostornina tovornega prostora: 17 m³, dolžina tovornega prostora: 4.200 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 2.000 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, Welcome to carmax24 Today you have the opportunity to purchase one of our select, inspected vehicles. Expertly appraised and high-quality vehicles have ensured great customer satisfaction since 2008. That’s our daily goal—because at carmax24, you as the customer always come first. Iveco Daily refrigerated box body with Zanotti Z350, with heating, fresh service 0° 6-speed manual transmission – 129 kW 3.0 L – Diesel Driving safety is ensured by the following systems: • ESP 9 – stabilizes the driving line, prevents skidding • ASR – prevents drive wheels from spinning on slippery surfaces • ABS – prevents the wheels from locking when braking • EBD – distributes braking force between front and rear axles • Hill Holder – prevents the vehicle from rolling back when on an incline • MSR – prevents drive wheel lockup due to engine braking when releasing the accelerator or insufficient downshifting • HBA – increases brake pressure during emergency braking • LAC – detects load distribution across the axles • TSM – reduces trailer sway • RMI&ROM – systems to prevent vehicle rollover and loss of stability Passenger passive safety: • Driver airbag COMFORT PLUS PACKAGE: • 79297 – Padded full headrests, day logo • 00259 – Padded, comfortable driver’s seat • 01605 – 10-inch display with navigation • 06650 – Cabin ventilation and heating system with automatic air conditioning • 01611 – USB socket with charger • 14522 – Active ACC cruise control with radar sensor • 06555 – Fog lights ADDITIONAL EQUIPMENT: • Double rear springs • Mirrors with up to 2.35 m width • Rear-view camera • 02443 – Leather steering wheel • 72625 – Full LED lighting (daytime, low-beam, high-beam) ISOTHERMIC INSTALLATION Approximate internal dimensions (mm): • Length 4200 mm • Width 2100 mm • Height 2000 mm • Subframe with aluminium floor bonding profiles for increased strength • Box body made of spacer panels, insulated • External and internal lining made of white polyester laminate • Double-wing rear doors, 270° opening angle, insulated with foam, equipped with accessories, 2 hinges per wing • Rear door frame made of acid-resistant steel with handle • Rear doors and walls protected against mechanical damage. Aluminium bumper strips (1 row) • Body frame made of anodized aluminium profiles • Number of interior lights depends on the body length, switch in driver’s cab • All materials used have PZH certificates and are approved for food contact • Plastic wheel arches with anti-mud flaps over the rear axle • Marker lights installed in accordance with traffic regulations • Retractable entry ladder at the rear door • Insulated floor, waterproof 15 mm plywood, anti-slip finish (grooved) • Rubber bumpers on the rear door frame • Anti-overflow folding strips (set) ADDITIONAL FEATURES: • Isothermal side door • Reinforcements for refrigeration unit Our special service for you: • Service record maintained at authorized and master workshops • Winter tires available at extra cost Hnsdoytmfljpfx Ahuol • Warranty insurance for up to 36 months available at extra cost • We’ll gladly take your used vehicle in part-exchange, at fair value! • Financing brokerage

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, vrsta upravljanja: CNC krmiljenje, proizvajalec krmilnikov: Siemens, ORBIBEND, mobilni orbitalni rezalnik, presega običajne planetarne reze in predstavlja novo stopnjo v razvoju upogibalcev cevi. (Patent Simat). Hnjdpfx Asy Rky Aehujl Mobilni ORBITALNI REZALNI SISTEM, ki lahko zarezuje v cev (Patent Simat): - Rez na koncu krivine: rezanje cevi na koncu ovinka, brez potrebe po dodatnem obrezovanju kratkih koncev. - Predhodno zarezovanje med gibanjem: rezanje poteka v senci med fazo upogibanja, kar prihrani čas cikla. - Upogibanje s fleksijo - Upogibanje s vlečenjem - Večradijsko upogibanje v enem procesu - Desno- in levo-stransko upogibanje v enem procesu ORBIBEND je možno kombinirati s strojem za oblikovanje cevi MACH serije, kar omogoča poleg upogibanja in rezanja tudi deformiranje, razširjanje, utiskanje, glajenje in valjanje koncev cevi. Prav tako je možno stroje povezati z robotom za obdelavo obeh koncev cevi.

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Juki AMS-210D šivalni avtomat Hnedpfxjw Uqm Ao Ahujl na električno nastavljivem podstavku po višini (ob dostavi z običajnim strojnim podstavkom je mogoče ceno znižati za 400 €)

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: LC611, Used Tetra Pak UHT System 5000 LPH Technical Specifications & Performance Data This Tetra Pak UHT System Steritherm (model VTIS C-4) is a robust, pre-owned processing unit designed to deliver consistent ultra-high-temperature processing for beverage production and industrial packaging operations. Engineered for high reliability and seamless integration with downstream filling and packaging equipment, it offers stable thermal performance and sanitary operation for modern beverage processing lines. Manufacturer: Tetra Pak Model: VTIS C-4 Steritherm Year of Manufacture: 2017 Capacity: 5000 L/h Maximum Process Temperature (indicative): up to 148 °C (according to inspected pressure section) Included in scope of supply: - Alfa Laval SHL-20 homogenizer (250 bar) - Alfa Laval H7-RC plate heat exchanger (198 L) - Pump station with Alfa Laval LKH-10 and LKH-107 pumps - ABB drive and CIP controller Design concept: Continuous UHT treatment with integrated homogenization and plate heat exchange Construction: Hygienic stainless-steel process components Advanced Automation & Control Systems The system features computer control for precise process management, ensuring stable time-temperature profiles and consistent product quality. Automated monitoring of key parameters helps reduce product losses and optimize energy consumption. Safety interlocks and measuring instruments ensure safe operation during heating, holding, and cooling phases. - Centralized computer control for process sequences and alarms - Integrated CIP controller for cleaning process optimization - Process instrumentation for pressure, temperature, and flow control - CE marking at the component level for included Alfa Laval equipment Integration in Production Lines Hedjy Ef T Tepfx Ahusnl Designed for seamless incorporation into a used filling line or new production layouts, this UHT system interfaces smoothly with upstream raw material handling as well as downstream filling and packaging equipment. Supports industrial packaging workflows for PET and glass bottling lines by delivering thermally processed product to fillers. - Inline compatibility with fillers, buffer tanks, and conveyors - Ideal for beverage production environments requiring continuous throughput of 5000 L/h - Flexible process connections for integration with existing pipelines and CIP loops - Suitable for upgrades to used installations or capacity expansions Machine Condition & Maintenance History This unit is offered as an operational, used UHT system. Accessory components show evidence of professional maintenance, including a recent maintenance label on the Alfa Laval pump (dated 04/24) and inspection records for pressure-loaded parts. Operational status: fully functional Inspection labels present on pressure sections

Stanje: rabljeno, Leto izdelave: 2014, številka stroja/vozila: CA79, Used R&G 12 Capsule Machine – 12,000 BPH Technical Specifications & Performance Data This single-station R&G capsule machine, model Z 12, is designed for high-speed capsule application in professional wine bottling environments. It combines PVC capsule heat-shrinking with champagne hood folding/smoothing in a swappable turret configuration, delivering reliable performance for industrial packaging and beverage production. Production Speed: up to 16,000 bph for PVC heat-shrinking; up to 12,000 bph for champagne hood folding/smoothing Application Technologies: PVC heat-shrink capsules and champagne/ sparkling wine hood folding/smoothing Number of Heads: 12 heat-shrink heads, interchangeable with 12 pneumo-mechanical folding/smoothing heads Rotation/Feed Direction: left to right, clockwise Capsule Magazine Capacity: approx. 10,000 pieces Bottle Handling: designed for glass bottles and standardized wine filling formats Year of Manufacture: 2014 Machine Type: Single-station capsule machine Model Code: Z 12 Hnedpfxoy Ef T Ho Ahuel Advanced Automation & Control Systems The Z 12 integrates recipe-controlled automation to simplify changeovers and ensure repeatable quality. Automated movements and intelligent sensors support consistent capsule application and reduce operator intervention. • Automatic machine height adjustment via recipe parameters • Universal infeed screw automatically adjusts from stored recipes • Cap/hood detector in case of missing capsule • Capsule presence sensor with automatic machine stop • Swappable turret tooling for rapid changeover between PVC heat-shrinking and champagne hood folding/smoothing processes Integration into the Production Line Designed for seamless integration into a used bottling line or as a standalone workstation. This capsule machine supports efficient material flow and quick adaptation to upstream/downstream equipment in beverage production. • Universal infeed/discharge starwheels for smooth material flow • Compatible with standard wine bottle geometries • Ideal for integration with corkers, wire hooding units, labellers, and conveyors • Recipe-based adjustments reduce changeover times Machine Condition & Maintenance History This used capsule machine is offered in operational condition and is ready for immediate use after standard commissioning. Its automated recipe controls and robust turret design support consistent performance in continuous operation. Performance & Versatility The Z 12 is designed for wineries and beverage producers seeking reliable capsule application with minimal downtime. Its dual-function turret enables switching between PVC capsule heat-shrinking and champagne hood folding/smoothing.

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: GA22, Used R&B RECORD 12 Wirehooder 12000 BPH Technical Specifications and Performance Data The RECORD 12 wirehooder with dual distributor is a highly efficient machine, designed to secure wire cages onto sparkling wine and similar glass bottles in industrial packaging environments. It is suitable for continuous operation as part of a used bottling line or as a standalone station, delivering reliable, pre-owned performance for beverage production environments where consistency and throughput are critical. Model: RECORD 12 Maximum speed: 12,000 bph Rotation direction: Clockwise, from left to right Year of manufacture: 2016 Dual distributor: Supports 2- and 4-leg wire cages Dual magazines: Approx. 6,000 cages each Container handling: Designed for handling glass bottles Advanced Automation & Control Systems Hsdjy Ef Tyepfx Ahuonl Engineered to minimize changeover times and operator intervention, this wirehooder features recipe-driven automation and precise handling characteristics. Automated setup routines ensure consistent application quality at high throughput rates. - Recipe-based automatic height adjustment: Rapid format matching via stored recipes - Universal feed screw: Automatic setup with recipe for smooth bottle feed - Sensors and interlocks: Cap detection (no cage application if no cap is present) and cage presence detector with machine stop Integration Capabilities within Production Line The RECORD 12 can be seamlessly integrated into complete filling and packaging lines for sparkling products. It operates inline with upstream closure or capping stations and downstream labeling or inspection systems, supporting a wide range of bottle sizes and heights typical in sparkling wine packaging. - Inline or standalone operation modes - Compatible with upstream closure stations and downstream labeling/inspection systems - Efficient material flow with left-to-right (clockwise) arrangement - Multi-format flexibility through recipe-based adjustments Machine Condition & Maintenance History This used wirehooder is offered in operational condition, featuring robust construction and proven reliability for industrial packaging applications. It is suitable for rapid recommissioning in a pre-owned bottling line. - Operating status: Ready for operation - Commercially maintained features with functional automation and detection systems Performance & Versatility Optimized for sparkling closures, the dual distributor manages both 2-leg and 4-leg cages to accommodate various product SKUs. The two high-capacity magazines support longer runs with fewer refills, ensuring continuous beverage production support....

Stanje: rabljeno, Leto izdelave: 2012, številka stroja/vozila: PST30, Gebrauchter Tetra Therm Aseptik-Pasteur – 2012 Technische Spezifikationen & Leistungsdaten Dieser aseptische Pasteur bietet zuverlässige Hochtemperatur-Kurzzeiterhitzung für anspruchsvolle Getränkeproduktion. Entwickelt innerhalb der Tetra Therm Baureihe und gefertigt in Zusammenarbeit mit Alfa Laval, ist er für den aseptischen Betrieb mit integrierter Entgasung zur Qualitätserhaltung empfindlicher Produkte konfiguriert. Als Gebrauchtanlage aus dem industriellen Verpackungsumfeld bietet er starke Leistung für eine gebrauchte Abfülllinie oder eine eigenständige Prozesszelle. Maschinentyp: Aseptik-Pasteur (Flash) Marke: Tetra Pak (entwickelt mit Alfa Laval) Modell: CM6-SM Baujahr: 2012 Produktionskapazität: bis zu 12.000 l/h (aktuelle Einstellung ca. 6.000 l/h) Maximale Prozesstemperatur (TS): 125 °C Maximal zulässiger Druck (PS): 6,0 bar Prüfdruck (PT): 8,6 bar Prozessvolumen: 162,0 l Mediumgruppe: 2 Entgaser: integriert CE-Konformität: CE 0409 Hnsdpfxoy Ef Sio Ahujl Prüfdruckdatum: 28.11.2012 Moderne Automatisierungs- und Steuerungssysteme Entwickelt für die zeitgemäße Getränkeproduktion, unterstützt dieser Aseptikpasteur die automatisierte Temperaturregelung und stabile Haltebedingungen, geeignet für HTST-Prozesse. Er ist kompatibel mit gängigen PLC-/HMI-Architekturen in Abfüll- und Verpackungsanlagen und ermöglicht Rezeptmanagement, Alarmfunktion und Trenddarstellung über gängige Anlagensteuerungen. Sicherheitsverriegelungen und CE-konforme Schutzmaßnahmen gewährleisten gleichbleibenden Betrieb und Bedienersicherheit während Prozess- und Reinigungsphasen. Integrationsfähigkeit in der Produktionslinie Konzipiert für den Inline-Einsatz in einer Getränkeproduktions- oder gebrauchten Abfüllanlage, lässt sich das System upstream mit Vorbereitungs- und Entgasungsmodulen und downstream mit Steriltanks, Füllern oder Homogenisatoren aus der Industrieverkettung verbinden. Die Formatanpassungsfähigkeit auf Prozessebene macht dieses System geeignet für verschiedene Saftrezepte und stille Getränkesorten, sodass die Produktion flexibel auf saisonale oder Eigenmarken-Nachfragen reagieren kann – ohne aufwendige Hardwareänderungen. Zustand & Wartungshistorie der Maschine Es handelt sich um einen gebrauchten Aseptikpasteur, der zuvor für Tomatensaft und stille Getränke (nicht kohlensäurehaltig) eingesetzt wurde. Die Anlage wird betriebsbereit angeboten und bietet eine praxisgerechte Lösung für Produzenten, die erprobte Technologie mit fest etablierten Leistungsmerkmalen in der Getränkeverarbeitung suchen. Betriebsleistung & Vielseitigkeit Das aseptische Flash-Verfahren mit 125 °C Prozesstemperatur und integrierter Entgasung schützt Farbe, Aroma und Nährstoffe und reduziert den Sauerstoffgehalt für eine längere Haltbarkeit. Der Leistungsbereich – aktuell auf ca. 6.000 l/h eingestellt, mit Reserven bis 12.000 l/h – ist sowohl für Kleinserien als auch für mittlere Produktionsmengen im Getränkesektor geeignet. Diese Konfiguration ist besonders für Säfte und andere stille Getränke geeignet, die eine kontrollierte thermische Behandlung erfordern. Installationsanforderungen & Standortvorbereitung Die Pasteurisieranlage ist typischerweise auf einem Anlagenrahmen (Skid) montiert für direkte...

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 3.862 h, številka stroja/vozila: LC619, Gebrauchte Tetra Pak TBA-8 SQ 1000 ml Abfüllanlage Technische Daten & Leistungskennzahlen Diese komplette aseptische Kartonverpackungslinie basiert auf einer Tetra Pak TBA/8-1000 SQ und bietet eine zuverlässige Leistung für die qualitativ hochwertige Getränkeproduktion sowie industrielle Verpackungsanwendungen. Ausgelegt für das 1,0-Liter-Kartonformat, integriert die Linie Funktionen wie Abfüllen, Verschließen, Fördern, Kartonverpacken und Schrumpffolienverpacken, um eine abgestimmte Gebraucht-Abfüllanlage für Anwender bereitzustellen, die eine hohe Betriebsbereitschaft und gleichmäßigen Output anstreben. Hauptabfüller: Tetra Pak TBA/8-1000 SQ (aseptisch) Leistung: bis zu 5.000 Verpackungen pro Stunde Gebindeart: Karton (Tetra Pak Format) Formatkompatibilität: 1,0 L Kartons Verschließeinheit: Tetra Cap Applicator 88 (für Stream Cap Verschlüsse) Sekundärverpackung: Tetra Cardboard Packer TCBP-70 Hsdpfx Asy Ef Scjhujnl Schrumpftunnel: Tetra Thermo Shrink Tunnel TTST-51 Fördertechnik: Akkumulationsförderer mit Dicolube TP Schmierung Hersteller: Tetra Pak Engineering Linienanwendung: Getränkeproduktion und industrielle Verpackung Fortschrittliche Automatisierungs- und Steuerungssysteme Die Linie integriert Tetra Pak Automatisierung für alle Module zur synchronen Steuerung und optimiertem Durchsatz. Das aseptische TBA/8-1000 SQ garantiert kontrollierte Abfüllbedingungen, während Verschließer, Fördertechnik und Endverpackungsanlagen aufeinander abgestimmt sind und für einen reibungslosen Ablauf sowie minimale Störungen sorgen. Sicherheitsverriegelungen und CE-zertifizierte Schutzvorrichtungen gewährleisten einen sicheren Betrieb. Schnelle Umstellungen an Verschließer und Verpacker ermöglichen effizientes Handling innerhalb des 1,0-Liter-Bereichs. - Zentrale Modulsteuerung für synchronisierten Linienbetrieb - Automatische Verschlussapplikation für Stream Cap - CE-konforme Sicherheitsarchitektur in allen Hauptmodulen - Schmierungsunterstützte Fördertechnik mit Dicolube TP Produktionslinienintegration Konzipiert als abgestimmte Verpackungsmaschinen-Einheit, ermöglicht diese Gebrauchtanlage eine Plug-and-Produce-Integration über Abfüllen, Verschließen, Fördern, Verpacken und Schrumpfen hinweg. Das Akkumulationsförderband stabilisiert den Produktfluss zwischen den Einheiten, schützt zudem vor Rückstau sowohl im aseptischen Bereich als auch im nachgelagerten Sekundärverpackungsprozess. Die Konfiguration eignet sich bestens für Produzenten, die sich auf 1,0-Liter-Kartons spezialisieren. - Inline-Konfiguration vom aseptischen Füllen bis zum End-of-Line-Wrapping - Förderakkumulation für ausgeglichenen Produktfluss und weniger Stillstände - Ideal für Getränkeproduktion mit aseptischer Kartonverpackung - Optimiert für 1,0 L Kartons; einfache Umstellung innerhalb dieses Formats Maschinenzustand & Wartungshistorie Die Anlage befindet sich in hervorragendem Zustand und ist sofort einsatzbereit – eine zuverlässige gebrauchte Abfülllinie für den schnellen Einsatz. Komponentenübersicht: - TBA/8-1000 SQ: 3.862 Betriebsstunden; exzellent, sofort einsatzbereit - Tetra Cap Applicator 88: 7.709 Betriebsstunden; betriebsbereit für Stream Cap Verschlüsse - TTST-51 Schrumpftunnel: re...

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33903000211, lastna masa: 7.707 kg, največja dovoljena obremenitev: 27.293 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, dolžina tovornega prostora: 15.030 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.655 mm, prostornina tovornega prostora: 101 m³, skupna dolžina: 15.350 mm, skupna širina: 2.550 mm, skupna višina: 4.005 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", Leto izdelave: 2023, The images are archive photos; the vehicle may still be in use! Vehicle consists of: Chassis semi-trailer for freight forwarding Fine-grain steel welded lightweight construction to the support legs, fifth wheel plate with replaceable 2-inch kingpin Hnedpey Snmpefx Ahujl 24 t 2-speed landing gear, single-side operation, with straight lower part Pull-out ladder at the rear Side door holders 2 wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel, with wide Fliegl mud flaps Foldable mudguard for lighting unit Quarter shell mudguards Rear impact protection Tarp rod with bracket 1 plastic toolbox Axles & Suspension 3 BPW disc brake axles "Axle/chassis laser alignment" – reduces tyre wear and fuel consumption Air suspension Brake System 2-line compressed air braking system Coloured hose runs for easy maintenance Spring-type parking brake Duomatic EBS, electronic braking system with EBS socket at the front, no connecting cable Note: The trailer must only be towed by tractors that guarantee the effectiveness of the ABS! With lift & lower valve Vehicle - Driving Stability System AAC Basic, automatic lift axle on the last axle, acts as shunting aid up to 20 km/h, manually switchable Axle load detection via EBS CAN bus signal Wheels and Tyres 385/55 R22.5 – make at manufacturer’s choice Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting Side yellow LED lighting connected to indicator “flashing side markers” 2 white front position lights 2 white/red lane departure lamps at the rear 2 x 7-pin and 1 x 15-pin misconnection-proof sockets at the front, no connecting cable SB Hydraulics Hydraulic cylinder with sliding mechanism integrated into the floor. 2-circuit hydraulics. Direction change (forward/reverse) is electrically operated by wired remote control. Hydraulic actuation via truck PTO Hydraulic connection with hose at front wall and HDK screw connector Recommended pump capacity: Flow rate: 110 l/min Pressure: 250 bar Min. oil tank capacity: 100 l Floor planking made of aluminium, 8 mm profiled, grooved Aluminium box body from high-quality, wear-resistant material. Front and side walls made from aluminium hollow profiles, all round at the top welded with a wide special reinforcement profile in aluminium Sliding wall for easier unloading, with reinforced tarpaulin at the bottom Rear wall from aluminium hollow profiles, double-winged door divided 1/2 to 1/2, with special U-profile frame with stop and rubber gasket all round, 2 external swing bolt locks, locked top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in direction of travel, with pivoting crossbar at top. Standing platform with ladders on both sides 3 removable, swivel crossbars for tarp support Sliding sheet, stowable on one side, with 2 longitudinal tensioning straps, 3 ratchet straps at the side Operating Instructions Special permit required if total hitch length exceeds 16,500 mm. Country of Registration / Plates Germany with Dekra inspection and certificate (§13 EC-FGV) Warning sign "Long HGV" Long-HGV combination inspection certificate Driver instruction at Triptis factory for up to 4 persons per truck combination Paintwork Frame: DB 7350 Novagrau tipper body: aluminium natural finish Tarpaulin: RAL 7035 light grey

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33903000364, lastna masa: 6.120 kg, največja dovoljena obremenitev: 28.880 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: srebrn, Leto izdelave: 2022, Attention: The images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- build tolerance Overall length approx.: 13,800 mm Max. overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low-bed length approx.: 9,600 mm Loading height in low-bed, loaded approx.: 900 mm Internal width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis semi-trailer for haulage company Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping at the beginning of the low-bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly sloped new outer frame design with "Load-Lock profile" for securing lashing straps "Patented Load-Lock-Cross" for attaching lashing straps, mounted on the crossmember underneath the outer frame 24 t two-speed landing gear, single-sided operation, with straight lower section, without load equalizer Free landing leg corner dimension or free rear swiveling radius of approx. 1,920 mm Side underrun protection: aluminum Rear underrun protection: steel Quarter shell mudguards 9 pairs of lashing/ stanchion rails recessed across the floor up to the main frame, approx. 100 mm high. With 20 mm round steel bars top and bottom, spacing between bars approx. 60 mm. Bottom with angle plate as closure, half open downwards. For securing and inserting stanchions 80 x 80 mm (3 pairs in gooseneck, 6 pairs in low-bed area) 3 pairs of stake pockets recessed in the outer frame, internal dimension approx. 72 x 42 mm Axles & Suspension: Drum brake axles as per manufacturer’s choice "Laser-measured axles/chassis" for reduced tire and fuel consumption Hnjdpfxey Slhqe Ahuel Air suspension Brake system: 2-line compressed air braking system Color-coded piping for easy service Spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line EBS electronic braking system, EBS socket at front, no connecting cable Note: The trailer must only be towed by tractor units that guarantee the effectiveness of the ABS! With lift and lower valve Vehicle stability system Wheels and Tires: 235/75 R17.5, manufacturer at the buyer’s discretion Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side lighting (recessed inward) 2 white position lights front 2 white/red lane marker lights rear 2 x 7-pin foolproof sockets at the front, no connecting cable 1 additional LED work light at rear, switched via reverse light Floor: Approximately 30 mm thick anti-slip plywood, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / front corner stanchions: 25 mm aluminum hollow profile, 1,350 mm high Country of registration / plates: Germany Inspection and certificate in Bosnia 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective tape in accordance with ECE R 048, white on the sides, red at the rear Warning sign according to ECE 70 Painting: Frame: hot-dip galvanized incl. passivation “15-year guarantee against corrosion perforation” Front corner pillars: hot-dip galvanized Front wa

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 67.434 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PT18SY0210, stružna dolžina: 300 mm, premer struženja: 230 mm, moč vretenovega motorja: 18.500 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 205 mm, pomik osi Y: 50 mm, pomik po osi Z: 350 mm, hitro pomikanje X-os: 30 m/min, hitri pomik na osi Z: 30 m/min, največja hitrost vrtenja: 6.000 obr/min, dolžina podajanja os Z: 350 mm, hitrost podajanja os Z: 30 m/min, zunanji premer vpenjalne glave: 250 mm, Premer palice (maks.): 65 mm, skupna masa: 8.800 kg, Ponujamo visoko zmogljiv in zanesljiv Doosan TT1800SY CNC stružni center, idealen za zahtevno serijsko proizvodnjo kot tudi za kompleksno precizno obdelavo. Ključne lastnosti: - Dvojno vreteno (glavno + protivreteno) - Y-os za ekscentrično in zahtevno obdelavo - Dvoturretni sistem (zgornji + spodnji revolver) - Možnost gnane orodje - Popolna sinhronizacija vreten (sočasna obdelava) - Visoka produktivnost s krajšimi časi ciklov Tehnične specifikacije: - Največji premer struženja: cca 230 mm Hnedpoy D Rypjfx Ahuel - Največja dolžina struženja: cca 300 mm - Prehod skozi vreteno: cca 65 mm - Hitrost vretena (glavno/protivreteno): do 5.000 min⁻¹ - Moč vretenkega motorja: ~18,5 kW - Hod osi Y: ±50 mm - Hoda osi X/Z: cca 205 mm / 350 mm - Hitri pomiki: do 30 m/min - Revolverja: 2 × 12 postaj - Hitrost gnane orodja: do 6.000 min⁻¹ - Orodjni nosilci: BMT55 - Krmilni sistem: FANUC 18iTB - C-os na obeh vretnih

Stanje: rabljeno, prevoženi kilometri: 87.000 km, moč: 62 kW (84,30 KM), prva registracija: 11/2016, vrsta goriva: dizel, skupna masa: 2.800 kg, barva: rumena, vrsta prenosa: mehanski, emisijski razred: Euro 5, število sedežev: 3, Leto izdelave: 2015, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, Volkswagen T6 Transporter with 2 Sliding Doors Net price: €12,990.- Single owner First registration: 11/2016 Mileage: 87,000 km TÜV: (New on request) 2.0 TDI Hjdpewm U Ivefx Ahuenl 19% VAT reclaimable 3 registered seats, retrofitting possible --- Business hours and additional information: Viewing / purchase without appointment possible: Mon - Thu: 9:00 am to 4:00 pm Fri: 9:00 am to 1:00 pm Sat: 9:00 am to 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen Please no emails / no emails will be processed due to time constraints. Thank you for your understanding! --- 3 seats officially registered / retrofitting of single seat or double bench possible Special equipment: - Electrical Package 1 - Driver assistance system - Rear parking aid - Fixed window in cargo/passenger compartment front right - No window at the rear - Tailgate with glazing - Heated rear window, with washer system - 80-litre fuel tank - Full-height partition with fixed window in cargo area - Van registration = reduced vehicle tax, class B driver’s license - Multifunction display/on-board computer - Spare wheel with regular tire - Sliding doors in cargo/passenger compartment left & right - Front and rear mud flaps - Upholstery: Robust seat covers - Cab seats: Driver's seat height-adjustable - Cab seats: Driver’s seat with lumbar support - 12V socket in cab - Central locking with remote control and interior operation Additional features: - Sliding door rail cover - Passenger airbag deactivatable - Driver/passenger airbags - Exterior mirror left: aspherical, right: convex - Rubber flooring in cab - Brake Assist (HBA) - Multi-Collision Brake - Laminated, tinted windscreen - Lockable glove compartment - Body type: panel van, standard roof - Adjustable steering column - Engine: 2.0 L - 62 kW TDI - Non-smoker package, pollen filter - Wheelbase: 3,000 mm - Emission standards: Euro 5 compliant - Sliding door right - Start/stop system - Front door storage compartment - Half-height hardboard partition in load/passenger compartment - Thermal insulation glazing - Permissible gross weight: 2,800 kg Further offers at: Equipment details were determined based on a VIN query; technical errors possible. Information provided online is non-binding and does not constitute guaranteed characteristics. Seller assumes no liability for typographical or data transmission errors / changes / input errors. Subject to errors and prior sale. Special equipment: Electrical Package 1, Driver assistance system: Rear parking aid, Fixed window in cargo/passenger compartment front right, no rear window, tailgate with glazing, heated rear window with washer system, 80-litre fuel tank, full-height partition with fixed window, van registration, multifunction display/on-board computer, spare wheel with regular tire, sliding door left, front and rear mud flaps, upholstery: robust seat covers, seats in cab:

Stanje: rabljeno, #200112 Trumpf OW200/S (16-delni) 86,00° R4,00 / H=218,30 / 800 kN/m Dolžine segmentov: 2x 25 mm 1x 30 mm 1x 40 mm 2x 100 mm (zmanjšano jedro 70 mm 1x levo / 1x desno) 5x 200 mm 5x 300 mm Skupna dolžina: 2820 mm ----- #200113 Trumpf OW201/S (18-delni) 86,00° R1,00 / H=220,00 / 800 kN/m Dolžine segmentov: 2x 25 mm 1x 30 mm 1x 35 mm 1x 40 mm 1x 45 mm 1x 50 mm 3x 100 mm (2x zmanjšano jedro 70 mm 1x levo / 1x desno) 1x 200 mm 7x 300 mm Skupna dolžina: 2850 mm ----- Hjdpfjy Anydsx Ahusnl #200117 Trumpf OW200/S (18-delni) 86,00° R1,00 / H=220,00 / 800 kN/m Dolžine segmentov: 18x 100 mm Skupna dolžina: 1800 mm ----- #200118 Trumpf OW/S (28-delni) 86,00° R1,00 / H=220,00 / 400 kN/m Dolžine segmentov: 4x 25 mm 2x 30 mm 1x 35 mm 2x 40 mm 1x 45 mm 1x 50 mm 4x 100 mm 5x 200 mm 8x 300 mm Skupna dolžina: 4170 mm

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), Wood production line from 2020. This HYMMEN JUPITER JPT C 680/548 with OFS 850 offers a maximum printing width of 548 mm and operates at a line speed of 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, making it ideal for flooring and furniture manufacturing. If you are looking for a high-quality printing machine, the HYMMEN JUPITER JPT C 680/548 with OFS 850 that we have for sale is an excellent option. Contact us for further details. • General system data: • Nominal width: 680 mm • Maximum print width: 548 mm (expandable to 680 mm) • Maximum panel width in OFS: 510 mm • Working height: 900 mm (+50 mm) • Processing: printing and top coating from above, reverse coating from below • Mode of operation: dual-lane up to max. part width of 255 mm; otherwise single-lane • Line speed: 8–65 m/min • Print speed: up to 50 m/min • Jupiter digital print engine (JPT): • Number of colors: 4 • Print heads per color: 8 (up to 10 possible) • Free slots for additional colors: 6 • Print head type: XAAR 2001 • Print unit with DLE structure: • Print rows: 1 • Print heads per row: 8 (up to 10 possible) • Free slots for additional rows: 1 • Total print heads: 8 • Print head type: XAAR 1003 • Raw panel specifications: • Length: 600–2800 mm • Width: 900–1260 mm • Thickness: 2–12 mm (no limitation); up to 28 mm with reduced speed • Saw cut format: • Longitudinal cuts: 5 • Longitudinal milling units: 2 • Min. part width: 160 mm • Finished panel specifications: • Length: 600–2800 mm • Width: 160–510 mm • Thickness: 2–12 mm (no limitation); up to 28 mm with reduced speed • Infeed system: • Type: vacuum gantry • Feeding stations: 2 • Discharge stations: 1 • Maximum feed rate: 8 cycles/min; with double stacking: 16 panels/min • Identical stacks per station: panel length up to 1550 mm = 2; ≥1550 mm = 1 • Maximum stack height: 1050 mm • Maximum stack weight: 5000 kg (combined) • Design: pitless • Transport type: protective board or pallet • Protective board (infeed): length 800–2800 mm; width 1000–1260 mm; thickness 20–30 mm (up to 150 mm for pallets); max. 80 kg per board/pallet • Stacking system (discharge): • Type: drop chute • Stack positions: 1 • Max. stacking performance: 30 cycles/min • Identical stacks per position: panel length up to 1550 mm = 2; ≥1550 mm = 1 • Maximum stack height: 1050 mm (alternatively: 1000 mm) • Maximum stack weight: 5000 kg (combined) (alternatively: 3500 kg) • Design: with pits • Transport type: protective board or pallet • Type of protective board feeding: loading by forklift, separation by robot • Protective board (stacking): length 800–2800 mm; width 1000–1200 mm; thickness 20–30 mm; max. 80 kg per board; material OSB or HDF • Processing units: • Number of units: 35 • Process steps: infeed, cutting, cleaning, infrared heating, UV curing, coating, digital printing, texturing, excimer matting, stacking • Application: • Industrial single-pass digital printing line for high-speed surface finishing of large panels (flooring and furniture) that produces realistic wood, stone, or custom decors directly onto substrates Additional equipment Hnjdpfxjy N U Rcj Ahuol • Robot for protective board separation at the discharge (as part of protective board handling)

Stanje: rabljeno, največja dovoljena obremenitev: 31.240 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2023, naslednji pregled (TÜV): 03/2027, skupna širina: 2.550 mm, skupna višina: 3.800 mm, Leto izdelave: 2023, Oprema: ABS, LANGENDORF/ FTS 3-Axle Aluminium Tipper "Combiliner" Hodpfey Iq Inox Ahuenl First registration: 03/2023, one owner Mileage: only 114,761 km The transport solution for interchangeable haulage of both liquid and solid goods without requiring conversion. The module can be removed at any time. System advantages: - Avoidance of empty runs thanks to swap body transport. Can be converted seasonally to a standard tipper for higher payload. Provides both economic and environmental benefits. - Module is integrated into the tailgate, so tipper remains fully operational without restrictions. - Rinsing function - Vehicle complies with QS and GMP+ standards, TUV Süd certified - Unladen weight approx. 7,760 kg - Tipper volume: 47.5 m³ - Slurry bag volume: 26.5 m³ - Pneumatic vibrator - Grain outlet in the floor, grain duct with dust-protection bag - 50 L aluminium water tank with compressed air connection, hose reel, and hand shower (QS and GMP compliant) SAF axles, reinforced "CD" version with large 430 mm disc brakes 1st axle is a LIFT AXLE WABCO trailer EBS with anti-skid RSS WABCO Optiturn for reduced turning circle WABCO Smartboard with axle load display Six 385/65 R 22.5 tyres SPEEDLINE high-polished aluminium rims FTS Combiliner Module equipment: - Vogelsang rotary lobe pump GL 186-184Q, weight-optimized - 4" and 6" spade slide valves - Operation via remote control and programmable sequences - Manual control unit on top for all hydraulic functions - Two-tank venting/degasification and overflow - Rinsing function via two flange connections (left/right rinsing) - Rinse baffle plates in the wire baskets - Powered reel with motor and hydraulic brake RENTING is the new BUYING, available immediately also with FULL-SERVICE RENTAL!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: električni, proizvajalec krmilnikov: Bodor, vrsta laserja: vlakenski laser, Obojestranski laserski stroj za rezanje pločevine s vlakni Opremljen z avtomatskimi funkcijami menjave šobe in enoklikovnega procesiranja je serija P primerna za vse zahteve rezanja. Luskasti grafit v ležišču stroja za rezanje bistveno poveča sposobnost blaženja tresljajev in odpornost proti obrabi, preostala napetost pa po starostnem kaljenju skoraj popolnoma izgine; s tem se izboljšata natančnost in življenjska doba opreme ter znižajo stroški. Posebna šoba za lasersko rezanje z vlakni in način rezanja omogočata hitrejše kisikovo rezanje ogljikovega jekla, varčnejše z dušikom pri nizkotlačnem rezanju nerjavečega jekla ter višjo kakovost pri rezanju ogljikovega jekla z zrakom. Laserske glave z vlakni lahko zaznajo izbočene ovire, kar učinkovito zmanjša stopnjo poškodb in posledično tudi stroške vzdrževanja laserskega rezalnika. Popolnoma zaprta zanka regulacije se prilagaja povratnim informacijam, s čimer zagotavlja skladnost dejanskega gibanja z vneseno teoretično vrednostjo. Z enoklikovnim procesiranjem je mogoče z enim laserskim rezalnikom v eni nastavitvi serijsko obdelati več pločevin hkrati. Stanje: Novo Tip laserja: vlaknasti laser Moč laserja: 1500 W - 30.000 W Hnsdpsh S H R Sjfx Ahusl Delovna površina: 3048*1524 mm - 6100*2500 mm Hitrost rezanja: 0–169 m/min Natančnost pozicioniranja: ±0,03 mm - ±0,05 mm Natančnost ponovnega pozicioniranja: ±0,02 mm - ±0,03 mm Podprti grafični formati: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT CNC: Da Način hlajenja: vodno hlajenje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, dolžina rezanja (maks.): 4.250 mm, Panel saw from 2007. This HOLZHER 6310 CUT 110 offers a cutting length of 4,250 mm and a cutting width of 2,700 mm. It features a Cut Control System with touchscreen operation, a saw carriage with main and scoring saws, and a grooving unit with adjustable depth. If you are looking for high-precision panel cutting, consider the HOLZHER 6310 CUT 110 panel saw we have for sale. Please contact us for further details. • Condition description: not overhauled – without warranty • Cutting width: 2,700 mm (original 5,250 mm, reduced by 2,550 mm to 2,700 mm) • Right-hand screen • Control: Cut Control System with touchscreen operation • Right-hand angle clamping device • Saw carriage: controlled main/scoring saw • Motor power: 18.5 kW (main machine) / 2.2 kW (scoring saw) • Scoring saw: manual adjustment of width and height • Grooving unit: 2 groove height settings (groove depth adjustable 2–12 mm, up to max. 9–19 mm) • Label printer: TLP2742 • Cutting unit • Additional air-blow unit traveling with the saw carriage • Three additional support tables, 2,400 mm, with running gear • Machine-side electrical cabinet, including speed monitoring with safety shutdown • Postforming unit, including scoring unit Hjdey N Scpepfx Ahuenl • Automatic central lubrication • Enclosed pressure beam • Foil cutting device Additional equipment: • Optional at extra cost: Dust extraction system (€4,000.00) • Brand: AL-KO • Model: AGGREGAT 300P • Year of manufacture: 2011 • Air volume: 5,089 m³/h • Vacuum: 2,050 Pa • Motor power: 7.5 kW • Suction inlet: 300 mm • Collection bins: 3 tanks, each 250 l • Integrated automatic shut-off

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Hedovvkfdjpfx Ahuenl Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Spray unit 1856 for entry and exit section: For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.

Leto izdelave: 2019, stanje: rabljeno, General Information The MobyLift is a handy tool designed for the ergonomic lifting, transport, and positioning of products such as doors, tabletops, other panels, and sheets. From an operational perspective, the MobyLift represents a responsible investment. It is simple to operate, reduces the number of damaged products, increases productivity, helps prevent back injuries, and consequently lowers work absences. The MobyLift was developed in cooperation with reputable installation companies, combining their expertise and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: · Mobile chassis · Electric lifting and tilting system · Automatic vacuum unit · Wireless electric control The MobyLift MC-120-H is designed for quick and easy disassembly into several portable modules once switched off, making it particularly convenient to load and unload or move it to another floor or building. Hodpfjv Dauwsx Ahujnl The MC-120-H comes equipped with a 24 V battery charger for the electric lifting and tilting system and features a charge indicator for continuous battery status monitoring. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilt angle, forwards/backwards: 37°, electrically operated - Swivel angle at head joint: 90° on both sides - Rotational angle at head joint: 360° infinite - Lateral shift: 7 cm - Weight: 150 kg, disassemblable by module Location: Nattheim

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The machine base is a monolithic design made from thick-walled steel. It is reinforced throughout the entire machine bed with welded triangular plates, which ensures exceptional rigidity. The use of a large-base triangular form in load-bearing components is key to ensuring lasting precision and stability. The machine layout allows an optimal workflow for the operator while requiring minimal space. This robust base offers the processing unit a balanced and secure foundation with excellent load distribution. The mobile gantry unit carrier is built from a solid monoblock. It moves in the X direction on prismatic, ground guides with recirculating ball carriages. Mounted on the mobile unit carrier, the processing unit also travels on prismatic, ground guides and recirculating ball carriages. Axis Movement: The drive system in the Y and Z axes utilizes precision-ground recirculating ball screws of the highest accuracy grade. The drive in the X-axis is by a backlash-free, preloaded precision rack and pinion system. This enables balanced load distribution during positioning. Such characteristics are essential for smooth operation, even in complex machining scenarios. Axis movement is powered by brushless AC servo motors, which provide excellent positioning speeds thanks to very short ramp times. The feedback systems are fully integrated into these motors, making the drive system entirely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection): 0.9 bar Control System / Control Cabinet · Office PC or industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote controller with main functions ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC provides the NC control with a unique level of familiarity: the software operates on Windows XP and allows fast and easy programming, which is also easy for inexperienced users to learn. The system is open, supporting connections for CD-ROM drive, sound card, barcode reader, modem, printer, scanning systems, etc. Installation of all network systems and any commonly available CAD programs is also possible. To save space, the control cabinet is located beneath the machine table, and the operator works from a separate, mobile control terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software Features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Supported programming Hjdpfx Ajvvi Nzshuenl - Calculator for direct data transfer - Graphics and syntax help for drilling and milling operations - Parametric programming to perform identical panel processing on different p...

Stanje: rabljeno, Leto izdelave: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE – WORK CELL VERSION X400 CELL Drilling and milling, made for you! This numerically controlled machining center comes equipped with a comprehensive range of milling/drilling tools to meet any requirements for processing wood and similar materials. - Highly efficient, equipped with drilling spindles at 8,000 rpm and the most robust spindle technology available on the market, offering more than 1,000 maintenance-free operating hours. - Superior and more comprehensively equipped: various configuration options via the multifunction table, allowing the machine to be optimally equipped according to specific requirements. Hnedpsvvi N Iefx Ahusl - Easier and more intuitive programming, thanks to the integrated Maestro CNC CAD/CAM module. - User-friendly: The work table is always accessible, the control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, there are no safety barriers. Load-Bearing Structure The load-bearing structure consists of a particularly robust monolithic steel base, heavily ribbed and very rigid. The especially wide support surface was specially designed to provide the machine with maximum stability, ensuring lasting precision regardless of operating conditions, and does not require anchoring to the floor. The base forms a large and solid support for the moving gantry: the work unit is thus equipped with a balanced, stable, and highly resilient support, capable of withstanding even the most demanding stress loads, leading to improved performance quality and greater accuracy. The moving gantry is a solid single component anchored to both sides of the base and slides along prismatic guides with recirculating ball shoes of the highest quality. Dual motorization along the X-axis ensures top performance even under heavy-duty operating conditions. Movement of the lower mobile unit (X-axis) and the working unit along the beam of the mobile unit (Y-axis) is achieved via a helical rack and pinion drive. This provides greater tooth-on-tooth engagement, achieving higher acceleration as well as increased speed along the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic loads and allowing for strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis slide, ensuring the finest machining quality by eliminating vibrations. Movement along X-Y-Z axes is provided by brushless motors, powered by static inverters, delivering: - Reduced processing times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders - No more reference point setup at machine startup due to absolute encoders - Eliminated general maintenance for the drive system since the brushless system contains no brushes Management of axis movements and general machine components is performed via an industrial NS module with digital D...