Flexlift 1000 Kg nakup rabljenega (74.904)

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: MBxx-25, DEMAG KBK 2 – Overhead Crane System, Crane Runway, Indoor Crane Redowq A Avopfx Afajw We assemble your crane runway to the desired dimensions – please inquire! Load capacity/hoisting capacity: 80, 125, 250, 500 up to 1000 kg Technical data of the system: Profile: Demag KBK 1, 2L, and 2 rails Also available as a single-girder runway with curved sections, turntables, and switches! Variable installation height The system can be delivered complete, including accessories such as: KBK rails, rail connectors, trolleys, end plates, energy chains, brackets/hangers, etc. All sizes of chain hoists available as options Various systems available Very good used condition Rails available in yellow or red! Shipping via freight forwarding possible, collection preferred Demag KBK1, KBK2, and KBK3 rails kept in stock!

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 266.653 km, moč: 132 kW (179,47 KM), prva registracija: 03/2020, vrsta goriva: dizel, velikost pnevmatike: 225/75R16, konfiguracija osi: 4x2, medosna razdalja: 4.750 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 85 l, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, število prestav: 8, emisijski razred: Euro 6, vzmetenje: zrak, število sedežev: 2, skupna dolžina: 7.650 mm, skupna širina: 2.330 mm, skupna višina: 3.100 mm, dovoljena osna obremenitev (os 1): 2.500 kg, dovoljena osna obremenitev (os 2): 5.350 kg, dolžina tovornega prostora: 5.240 mm, širina tovornega prostora: 2.240 mm, višina nakladalnega prostora: 2.090 mm, Leto izdelave: 2020, Oprema: ABS, AdBlue, Bluetooth, USB priključek, airbag, centralno zaklepanje, drsna vrata, dvižna zadnja plošča, električno nastavljivo ogledalo, električno upravljanje oken, elektronski program stabilnosti (ESP), klimatska naprava, nadzor oprijema, računalnik na krovu, sistem za pomoč pri speljevanju v klanec, tempomat, General Information Number of doors: 2 Cab type: single License plate: 20-BPG-1 Technical Information Number of cylinders: 4 Engine displacement: 2,998 cc Transmission Transmission: HI-MATIC, 8-speed automatic Axle Configuration Tyre size: 225/75R16 Brakes: disc brakes Front axle: Max. axle load: 2,500 kg; Steered; Tyre tread left: 90%; Tyre tread right: 90% Rear axle: Twin tyres; Max. axle load: 5,350 kg; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80%; Suspension: air suspension Weights Unladen weight: 3,825 kg Payload: 3,175 kg Gross vehicle weight (GVW): 7,000 kg Functional Tail lift: DHOLLANDIA DHLM.15, tailgate, 1,000 kg Superstructure brand: LAMBOO Rjdpfsyy Abwex Afaew Maintenance APK (Technical Inspection): New inspection upon delivery Condition Technical condition: very good Optical condition: very good Damages: none Further Information Please contact Moussa or Youssef for more information. = Additional options and accessories = - Heated exterior mirrors - 360-degree camera - Air conditioning - Lane assist - Multifunction steering wheel - Radio/CD player - Reversing camera - Side door - Tachograph - Twin tyres = Notes = VIDEO: Very nice and well-maintained condition Iveco Daily 70C18 3.0 D 180 HP Euro 6D Hi-Matic 8-speed automatic Permissible total weight 7,000 kg (driving license class C1/C) Payload 3,175 kg Loading area internal dimensions: L 5,243 mm / W 2,236 mm / H 2,093 mm Electric sliding door 266,000 km, full service history Technically and visually in very good condition

Leto izdelave: 1976, stanje: rabljeno, številka stroja/vozila: TH20010161, Demag overhead crane – bridge crane, crane runway, hall crane Load capacity / lifting capacity max. 10t - 10,000kg, span 11,750mm External dimension with end carriage approx. 12,000mm With steel hoist and floor-mounted pendant control Overall height (top of crane to hook) approx. 900mm End carriage length with buffer approx. 3,500mm Lifting height (wire rope hoist) 10,000mm Crane weight approx. 4,000kg Includes 2 x 25m running rails HEB280, includes conductor rails!!! Beam lengths per side: 1 x approx. 10m 1 x approx. 15m Support spacing 10m / (10+5)m Rjdpfxov A Sa Nj Afaow Crane is dismantled, immediately available ex works 75053 Gondelsheim Used condition ----- Column-mounted jib cranes and wall-mounted jib cranes also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarding possible – Please inquire with your ZIP code Collection preferred

Leto izdelave: 1970, stanje: rabljeno, številka stroja/vozila: TH20010142, Demag overhead bridge crane, Kranhimmel crane runway, hall crane Max payload/lifting capacity: 10t - 10,000kg, span 11,750mm External dimension including end carriage approx. 12,000mm Equipped with steel hoist and pendant control Construction height (top edge of crane to hook): approx. 900mm End carriage length with buffer: approx. 3,500mm Hoist lifting height (wire rope): 10,000mm Crane weight: approx. 4,000kg Rjdpfx Aev A Rxkjfasw Includes 2x 25m crane runway rails HEB280 and power supply rails! Runway girder lengths per side: 1x approx. 10m 1x approx. 15m Support spacing: 10m / 10+5m The crane is dismantled and available immediately ex-location 75053 Gondelsheim Used condition ----- Also available: column-mounted slewing cranes and wall-mounted slewing cranes Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarding possible, please inquire with ZIP code Collection preferred

Stanje: novo, Leto izdelave: 2026, Enostavno vzdrževalna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predsobo s prizmatičnim ločevalnikom, v osnovi sestavljena iz: a) 1 kos kartušnega suhega filtra, tip PF 2.16.B250 za 30.000 m³/h (na voljo tudi druge velikosti) Sestavljen iz stabilnega, vakuumsko neprepustnega 3 mm jeklenega ohišja, razdeljenega na surovi plinski prostor s filtrskimi kartušami, filtrsko predsobo s prizmatičnim ločevalnikom in čistim plinskim prostorom s čiščenjem filtra z uporabo stisnjenega zraka, vsak z ločenimi servisnimi vrati Easy Open. Redpfx Ajw Ivqmsfaew Lijak za zbiranje prahu z režnim ventilom ali zvezdastim dozatorjem za odstranjevanje prahu z Big Bag vrečami. Krmiljenje magnetnega ventila z indikatorjem diferenčnega tlaka za optimalno nastavitev čiščenja filtrov. Servisna vrata kot nihajna vrata – enostavno vzdrževanje.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 10.000 mm, notranja višina: 5.000 mm, filtrirna površina: 250 m², volumenski pretok: 16 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Redpfx Afsu Ey Dloaow Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Leto izdelave: 2026, Shot blasting booth components: flat conveyor floor, cross screw conveyor, bucket elevator, air separator, screen, abrasive bunker, blasting machine, filter unit, fan, air ducts, lamella extraction wall, blast feed box, electrical control system supplied as a kit without installation. Alternatively, the system components can also be installed on your premises by our professional technicians. Rsdpfxohc T Nle Afasw

Stanje: novo, lastna masa: 1.100 kg, največja dovoljena obremenitev: 2.400 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 2.000 mm, velikost pnevmatike: 195/50r13c, *Autotrailer box trailer* C1000 from Cheval Liberté / Debon. Large volume, attractive design, aerodynamic front section, composite plastic side walls, aluminum floor, and polyester roof are all combined in this box trailer. Hardly any other car box trailer offers such outstanding driving behavior! The trailer is equipped with the Pullman2 suspension system, an in-house development by Cheval Liberté. A low loading height of just 45 cm, independent wheel suspension with trailing arms, coil springs, and automotive-grade shock absorbers provide optimal driving characteristics. The *shallow loading angle* is ideal for loading *a passenger car*. A *loading ramp* with additional fold-out *drive-on rails* and an especially low chassis, enabling the transport even of low-slung vehicles. Rsdpfxok S Ecio Afaew The extensive standard equipment on this *car trailer* includes a *poly roof* with a one-piece *poly nose*, *composite plastic walls*, *aluminum floor*, two *side doors*, two side flaps, a winch, slotted stand rails, *flap-door system*, *100 km/h approval*, *interior light*, *automatic jockey wheel*, *lashing eyes*, maneuvering handle, *sturdy frame*, and a V-drawbar. We offer a wide range of affordable accessories for box trailers, such as motorcycle wheel chocks, stand rails, motorcycle straps, lashing rails, lashing straps, rear supports, and lashing eyes. The superstructure is splash-proof.

Stanje: dober (rabljeno), Leto izdelave: 2016, obratovalne ure: 1.430 h, dvižna višina: 2.890 mm, tip droga: dupleks, napetost baterije: 24 V, dolžina vilic: 1.200 mm, Lastna teža: 940 kg Dvižna zmogljivost: 1.000 kg Omrežna napetost: 220 V CE oznaka: da Tehnično stanje: dobro Rsdezayy Aepfx Afaow Optično stanje: dobro Za več informacij se obrnite na Bas Sindorf.

Stanje: dober (rabljeno), Leto izdelave: 2014, Proizvajalec: DEMAG Rsdpfx Afjyu R Dzsaew Nosilnost: 860 kg + 630 kg (opremljeno z dvema dvigali) Točne tehnične mere so prikazane na slikah. Tir za dvigalo je mogoče podaljšati s strukturami in nogami, prikazanimi na slikah, vendar pa so za podaljšanje potrebni tudi drugi elementi tira, ki niso na voljo!!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Celovita linija Tetra Pak TBA 21-1000 Slim, vključuje: 1. Polnilka TBA/21 1000 Slim, V050, letnik 2003, 52.000 delovnih ur 2. Aplikator zamaškov CAP30 za Helicap23 Pro26 3. Akumulator škatel Easy Ride Terplus 4. Ovijalka wrap around TCBP70 5. Transportni trakovi 6. Transportni sistemi Linija je v zelo dobrem stanju, še vedno v proizvodnji do aprila. Možno prodati tudi brez aplikatorja CAP30. Rjdpfx Afsycwvaeaow

Stanje: zelo dobro (rabljeno), Leto izdelave: 1980, Karstens K11 1000 This Karstens K11 comes from a university setting and has seen very little use. All cables and hoses in the wet area have been replaced. It has extremely low operating hours. As we are specialized in Karstens cylindrical grinding machines, we can offer you complete service (both electrical and mechanical) for the machine after purchase. Technical specifications: - Centre distance: 1000 mm - Centre height: 180 mm - Workpiece weight: 70 kg between centers, 250 kg between centers - Grinding wheel diameter: 400 mm - Workpiece spindle: MK4, steplessly adjustable speed 30-450 rpm, swiveling range 0 - 90° - Tailstock: MK4, quill stroke 45 mm - Tailstock rest beside Z-axis table - Quill force: 200-600 N - Table swivel: 12.5 degrees - Adjustment travel of infeed spindle: 80 mm - Rapid traverse: 50 mm Rjdpfx Afjh Rit Eoaew - Coarse adjustment air cushion: 280 mm - External grinding spindle motor: 4 kW - Internal grinding spindle motor: 2.2 kW - Workpiece spindle motor: 0.55 kW - Machine weight: Net 3500 kg - Infeed drive via DC motor - Air-cushioned rapid adjustment of the grinding spindle headstock for quick and safe positioning to the grinding location - Separate drive for spindles for external and internal grinding - Fully automatic work cycle, infeed movement controlled by cam switch: rapid approach, rapid return, grinding operation, infeed stop, micrometer infeed - Automatic longitudinal grinding cycle - Central coolant supply for all grinding positions - Workpiece headstock with steplessly adjustable drive for rotating or fixed spindle - Infeed control for longitudinal grinding and plunge grinding, input for retraction, infeed amounts, feed rates, spark-out times, idle strokes - Digital display for X-axis by Heidenhain - Paper band filtration unit can be offered as an option Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Leto izdelave: 1999, stanje: rabljeno, DEMAG KBK 2 - Crane Runway Ceiling System Hall Crane Please inquire about crane runways according to your specific dimensions. Load capacity / lifting capacity from 80, 125, 250, 500 up to 1000 kg Technical data of the system: Demag KBK 2 profile rails Rodpfjct Dhajx Afajw Also available as single-rail tracks with curve sections and switches! Mounting height variable The system can be supplied complete, including: KBK rails, rail connectors, trolleys, end plates, cable carriers, brackets/hangers, etc. All electric chain hoists are optionally available. Thanks to the low dead weight, installation is also possible in lightweight constructions, timber halls, or older buildings. Very good used condition Rails available in yellow or red! Shipping by freight carrier possible, but collection preferred Demag KBK1, KBK2, and KBK3 rails are in stock! Contact: Mr. Goepferich info[at]mobatgg.de

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Rodpjyz Af Eofx Afasw Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: rabljeno, Leto izdelave: 1990, GVW: 12,000 kg Please contact Emal Jaweed for further information. = Additional options and equipment = - Leaf suspension, rear - Leaf suspension, front Rjdpfey Ivy Nox Afaow = Remarks = Suction-pressure tank on tandem chassis, Joskin E&H, type: Master 10000, year of manufacture: 1990, axles: 2, permissible support load: 1,500 kg, permissible axle load: 1,600 kg, max. 25 km/h, tank structure, year of tank structure: 1990, tank volume: 10 m³, leaf suspension, trailer hitch, Alliance 550 / 60 - 22.5 Other information: * We offer over 200 units for sale. * Our location is 30 km north of Frankfurt/M Airport. * Financing & leasing available. * Specialist for transport & worldwide shipping. * No liability for typographical or clerical errors. * Subject to errors and prior sale. * Trade-in possible! * For vehicle/machinery purchases, only the terms and conditions of Jaweed GmbH apply. * You can find further information and our terms and conditions on our website.

Stanje: dober (rabljeno), Leto izdelave: 1973, številka stroja/vozila: 73040, Embossing Press Baier GEBA 1/F, installation height 90 mm, pressing force 800 kg, working area 10 cm x 14 cm, year of manufacture 1973, machine number 73040, in good condition, immediately available. Rodpjvt Rpqjfx Afaow If interested, we are also happy to provide information about other machines available at our facility. You are warmly invited to inspect the machine at our premises by appointment.

Stanje: rabljeno, Injektorski tiskalnik, tiskalnik etiket, tiskalnik črtnih kod, tiskalnik, logistični etiketirni sistem, injektorski tiskalnik, termalni inkjet tiskalnik, krmilna enota za injektorski tiskalnik -Stanje: nepreverjeno, sporočilo na zaslonu - napravo je treba očistiti Rsdpfxjykpg To Afaow -Prenos: v trenutnem stanju kot je bilo ogledano -Proizvajalec: Keyence, inkjet tiskalnik z dodatki -Tip: MK-G1000 -Touch-panel: MK-P5 -Posamezne komponente/dodatna oprema: glej slike -Oddaja/cena: komplet -Transportne mere: 465/380/V630 mm -Teža: 58 kg

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Redpfxjhx Elfe Afaow Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: zelo dobro (rabljeno), Steady rest (28388) Center height: 360 mm Weight: 37 kg Rjdomkfd Sjpfx Afaew Dimensions: see drawing

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, številka stroja/vozila: MIKA Seilzüge, 1x Palan à câble Demag DR pour grue En raison des nombreuses demandes - le prix est indiqué par pièce !!!! 5 pièces disponibles, voir liste : 1x Palan à câble Demag EKDR-Pro3 NL1600Kg/1,6t, numéro de série 96656002, 4M, course de crochet/levée 12m !! - 2 brins, année 2015 1x Palan à câble Demag EKDR-3 NL1600Kg/1,6t, numéro de série 96656701, 2M, course de crochet/levée 12m !! - 2 brins, année 2015 1x Palan à câble Demag EKDR-3 NL1000Kg/1,0t, numéro de série 96305549, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 1x Palan à câble Demag EKDR-3 NL1000Kg/1,0t, numéro de série 96305548, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 1x Palan à câble Demag EKDR-3 NL1600Kg/1,6t, numéro de série 96305550, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 Avec 2 vitesses de levage, hauteur de levage 12 m, écartement du palan réglable. Chacun avec boîtier de commande suspendu et fiche de raccordement pour l’alimentation électrique. Poids total env. 300 kg, alimentation 400V 50Hz. Rjdpfx Afoy D D S Sjaow Très bon état, voir photos. Localisation de l’article : 75053 Gondelsheim Expédition possible, merci de préciser votre code postal pour un devis.

Stanje: rabljeno, Leto izdelave: 1979, številka stroja/vozila: Res BS, Demag PK2 Chain Hoist Crane Lifting Gear 250Kg / 500Kg Approx. 40 units available!!! 250KG / 0.25t load capacity / lifting capacity – single-fall – 500.- 500KG / 0.5t load capacity / lifting capacity – double-fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Delivered complete with control pendant and load hook Total weight approx. 40 kg, connection to 380V 50Hz TOP condition, fully functional. Not a worn or used-up unit! Rjdpfsvzkylex Afaow Just connect and start operating. Comes from ongoing operation. Item location: 75053 Gondelsheim See pictures

Leto izdelave: 1999, stanje: dober (rabljeno), DEMAG KBK overhead crane system, crane runway, approx. 20 x 6 m Load capacity / lifting capacity: 1,000 kg (1.0 t) Technical data of the system: Crane runway constructed from Demag KBK2 rails Rodpfx Asct Dhyefaow Mounting height variable, chain length approx. 4 m System is delivered complete: - KBK rails, rail connectors - Carriages, end plates, cable trolley, brackets/hangers, etc. Including double girder bridge with Demag 1t chain hoist System is NOT electrically traversable as shown in the pictures – no travel drives included! Photos show the same system in 12 x 6 m design Shipping by carrier possible, collection preferred Demag KBK1, KBK2, and KBK3 rails are in stock! Shipping by truck, €450 net within approx. 350 km radius For other dimensions or shipping rates, please inquire – we will provide you with a prompt, non-binding offer!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, tlak (maks.): 250 letvica, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for demanding geometries to right- or left-hand bending. The plug-in bending tools enable quick changeovers to different tube sizes. Fast hydraulics to reduce downtimes is a key factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store a virtually unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In "Simple Bending", the length and rotation of each bend relative to each other are displayed automatically. In "Controlled Bending" mode, the data is stored beforehand, and during the bending process, a continuous target/actual comparison is performed. As a result, mispositioning within a tolerance window is ruled out and user-related error rates are minimized. General error messages are shown in full text on the large screen. The mandrel retraction is programmable and can automatically retract early when the bending angle is reached. The compact drive unit with detachable mandrel holder offers benefits for installation on site as well as for special designs with large tube feed, and is also available as a stationary version with a tool and mandrel rod organizer. The cost-effective alternative to a fully controlled CNC machine. POTENTIAL APPLICATIONS: • Hydraulic tubing installation • Pipeline construction • Plant construction, e.g. for chemical industry • Metal fabrication Redpfx Afsng Exaoaew • Prototype construction • Technical Data: • Bending capacity: Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunction machine control for bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Maximum bending angle: 180° • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot pedal OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Positioning of length and rotation via automatic braking function or manual stops operated by foot pedal • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Pipe calculation software • Laser-assisted tool monitoring for checking tool clamping force • 10-inch touchscreen with integrated pipe calculation • Bending radii up to 250 mm • Data transfer by cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demonstration room • Consulting and information session at your site • Consultation and processing of leasing/financing purchases through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance for your machine

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, minimalni polmer upogibanja: 9 mm, tlak (maks.): 250 letvica, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Rodjndn Agspfx Afaow Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible Rjdpfx Afenh R Ekoaew • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance