Faes Cases 4 Transportni Kovčki 52X72X35 Cm nakup rabljenega (72.489)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 105 kW (142,76 KM), vrsta goriva: dizel, barva: zlato, obratovalna teža: 19.000 kg, Leto izdelave: 2012, obratovalne ure: 14.700 h, Oprema: centralizirani mazalni sistem, hitroizmenjevalna naprava, nastavljiva roka, vzvratna kamera, Liebherr A 904 C Litronic mobilni bagger Leto izdelave: 2012 14.700 h 105 kW pribl. 19.000 kg 20 km/h Lsdpfx Alsy E Hrdj Nerk Avtomatska klimatska naprava Premični izravnalni dvižni krak Širina: 255 cm Centralno mazanje Vse cevi Mehanski hitri priklop MS 21 Kamera

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: NR: 220.10.029.19, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj visokokakovostni robni lepilni stroj Format4 Tempora 60.06 EL – takoj pripravljen za delo! Dvignite svojo proizvodnjo na višjo raven s tem malo rabljenim robnim lepilnim strojem Format4 Tempora 60.06 EL v odličnem stanju. Stroj je zasnovan za industrijsko uporabo in zagotavlja izjemno natančnost ter popolno površino vsake plošče. - Visokonatančno avtomatsko lepljenje robov - Enota za predrezkanje za popolno pripravo roba - Zanesljiv in konstanten sistem lepljenja - Popolna obdelava: porezovanje, rezkanje, poliranje - Enostavno upravljanje in zanesljivo delovanje Lrsdjy Dg N Topfx Al Nek Vključene dodatne opreme: - Rdeč zračni rezervoar (kot je prikazano na fotografijah) - Dodatni ogrevani posoda za lepilo – idealna za hitro menjavo različnih barv lepila Stroj je skrbno vzdrževan, zelo malo rabljen in popolnoma operativen – pripravljen za neposredno uporabo v proizvodnji. Stroj je na voljo zaradi reorganizacije obrata. Za več podrobnosti ali ogled nas kontaktirajte.

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 10.390 h, Funkcionalnost: popolnoma funkcionalen, moč: 33 kW (44,87 KM), prva registracija: 06/2014, skupna masa: 2.600 kg, vrsta goriva: dizel, barva: oranžna, konfiguracija osi: 4x4, lastna masa: 1.600 kg, gorivo: dizel, voznikova kabina: dnevna kabina, vrsta prenosa: hidrostat, vzmetenje: jeklo, prostornina tovornega prostora: 1 m³, Oprema: ABS, dodatne luči, hidravlika, klimatska naprava, pogon na vsa štiri kolesa, Vlačilna naprava: + Hako + CityMaster 1250 + Prva registracija: 25.06.2014 Lrodoy Ew Rqopfx Al Njk + 4-valjni Yanmar dizel, 45KM, 2190 ccm + 10.390 delovnih ur + Hidrostat, maks. hitrost 30 km/h + Zlomljivo krmiljenje + Pogon na vsa kolesa + Sprednji dvigalo + Sprednja in zadnja hidravlika + Klima naprava + Kamera za vzvratno vožnjo + Radio/CD + Rumena luč + Sprednja krtača pregibna levo/desno + 1m³ nagibni zbiralnik za pometene odpadke iz nerjavečega jekla + Lastna masa: 1.600 kg; dovolj. skupna masa: 2.600 kg + 330 cm x 120 cm x 220 cm (d x š x v) Komunalno vozilo iz prve roke Vsa na novo objavljena vozila prejmete po e-pošti – prijavite se na naš NEWSLETTER! Možne napake in tipkarske napake, vmesna prodaja pridržana!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Stanje: dober (rabljeno), Leto izdelave: 2005, EMCOTURN 345/II TCM "STANGE": 2-osá CNC sústruh, 13 kW pohon, 60-6300 ot./min. na hlavnom vretene, lineárny vedený systém, digitálny pohonný systém, obsahuje: * 12-polohová revolverová hlava VDI 30 axiálna s logikou smeru, pre až 6 poháňaných nástrojov, krútiaci moment 16 Nm, rozsah otáčok 0-5000 ot./min. * C-os * Mechanická brzda vretena * TRANSMIT softvér pre jednoduché programovanie C-osi * Pinolový koník: - Priemer pinoly 60 mm Lodpfx Ajyu Un Rjl Njrk - Zdvih pinoly 120 mm - Morse kužeľ MK4 - Max. sila pinoly 5000N * Vretenová hlava veľkosti 45 so vretenovým pripojením KK5 (DIN 55026) * Dutý upínací valec vrátane ťažnej trubky * EMCO štandardné rozhranie podávača tyčí * Čerpadlo chladiacej kvapaliny 3 bar * Fanuc 21i * Pracovné osvetlenie * Hydraulická jednotka * Rozhranie pre nožný spínač a dopravník triesok * Výklopný držiak na meradlá * Integrovaný predradný transformátor pre 3x230, 3x400 alebo 3x480 Volt - 50/60 Hz * Dokumentácia Rok výroby: 2005 Výrobné číslo: R2AT3551

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) Lodpfx Aod Tbbdsl Nsrk - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm Lrjdefdkb Tepfx Al Nok - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Lrodpfxed Tqale Al Nek Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: Ljdpfjfdkb Uex Al Nsrk - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: Lrjdpfx Aljguk A Hs Nsk - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Lrsdpfjfdkbhex Al Nok Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth Lsdpfx Aoguk Dkjl Nsrk - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. Lrjdpfx Aljguk Dve Nek The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: dober (rabljeno), Leto izdelave: 2018, Ref. No.: 10531 Manufacturer: HONOR SEIKI Model: VL - 400CM Year of manufacture: 2018 Control type: CNC Control system: Siemens SINUMERIK 840D Location: Halberstadt Country of origin: Taiwan Machine no.: 79XXX Ledpfx Aloy Ed Ezs Nsrk C-axis: Yes C-axis speed: 50 - 2250 rpm Turning height: 2370 mm Table diameter: 4000 mm Rapid traverse speed X-axis: 10 m/min Rapid traverse speed Z-axis: 10 m/min Table rotation speed: 1 - 85 rpm Max. workpiece weight: 30 kg Max. turning diameter: 4 mm Distance between faceplate and crossbeam support: 820-3320 mm Feed rate: mm/min Number of tools in chain magazine: 24 Cross rail adjustment: 300 x 300 mm Spindle motor drive: AC 60/75/100 kW Servo motors (X/Z axes): 5.5 / 5.5 kW Machine length: 9 mm Machine width: 7000 mm Machine height: 8000/9100 mm Machine weight approx.: 115 t Additional information: - 2-speed gearbox - ATC (Automatic Tool Changer) 16/20/24 - Tool size 25 x 32 x 40 - Driven tool motor AC 15/18.5 The machine is still in ongoing production and can be inspected by appointment.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 9.150 kg, nosilnost na odsek shranjevanja: 3.050 kg, skupna dolžina: 22.800 mm, skupna višina: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 22.800 mm, 4 dvopolna paletna regala (M35112711-3) vsak 5,7 m dolg, 3,5 m visok, 1,1 m globok, vsak s 2 polji, širokimi 2,7 m, vsak s 3 nivoji prečk, nosilnost na polje 3000 kg. - 12 okvirjev (RM3511 - RAL5019) - 24 talnih plošč, podlag, pritrdilni material - 48 talnih sider (ZZBA1210) - 48 posameznih prečk (T2711 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so vijačeni, ne predmontirani Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže Lrodjyz Iccspfx Al Njk - razklad tovornjaka izvaja kupec z lastno dvižno opremo - dobave po celotni Nemčiji, razen otokov! Dobave v EU države po individualnem dogovoru.

Stanje: zelo dobro (rabljeno), Edgebander FORMAT 4 Tempora 60.06 glueBox - used Touchscreen Swiveling control panel Program memory Automatic pressure bridge adjustment Feed via transport chain Lrsdpfxsu R S Nws Al Nek Extendable workpiece support Diamond jointers for both climb and counter-rotation Glue pot located at the bottom Quick-change glue pot system Suitable for PUR adhesives GLUEBOX system Pressure unit with powered roller Cut-off saw with 2 high-frequency motors Cut-off saw, pneumatically tiltable Flush / radius milling unit Motorized positioning control for milling unit x-motion PLUS Corner rounding unit with diamond-coated cutters Radius scraper blade Radius scraper blade with motorized positioning Flat scraper blade Workpiece-activated flat scraper blade Infeed lock Spraying unit for release agent Spraying unit for lubricant Spraying unit for cleaning agent Year of manufacture: 2022 ----- Technical Specifications ----- Edging thickness, coil material: 0.4 - 3 mm Edging thickness, strip material: 3 - 6 mm Workpiece thickness: 8 - 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen diagonal: 15 inches Jointers dimensions: D 80 x 64 mm Jointers power: 1.1 kW Cut-off saw power: 0.35 kW Milling station power: 0.75 kW Extraction port diameter: 80 + 160 mm Compressed air connection: 7 - 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality Info: - All settings checked - Adjusted to manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Immediately ready for operation

Stanje: rabljeno, prevoženi kilometri: 310.431 km, moč: 355 kW (482,67 KM), prva registracija: 08/2022, vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 3.800 mm, naslednji pregled (TÜV): 04/2027, barva: zelen, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, vzmetenje: zrak, število sedežev: 2, Oprema: klimatska naprava, nizka raven hrupa, parkirni grelec, računalnik na krovu, tempomat, Sedeži iz blaga, notranja barva siva, zračno vzmetenje, tahograf, sedelna sklopka, elektronski zavorni sistem EBS, elektronski stabilizacijski program ESP, klimatska naprava v mirovanju, prilagodljivi tempomat ACC, udobni sedeži, voznikov sedež z zračnim vzmetenjem, naslonjalo za roke za voznika/sopotnika, gretje sedežev, LED žarometi, radio, avdio vmesnik, asistent za ohranjanje voznega pasu, usnjen volan, električna dvigala stekel, prikaz zunanje temperature, strešni spojler, električni zunanji ogledali, ogledalo za robnik, širokokotno ogledalo, centralno zaklepanje, senčniki, hladilna skrinja, pomoč pri speljevanju v klanec, dnevne luči, držalo za pijačo, informacijski in servisni sistem, omejevalnik hitrosti, pomoč pri zaviranju v sili, shrambni predal, zgornja in spodnja postelja. Vsa vzdrževanja so bila opravljena pri DAF-u in so zabeležena v DAF servisnem sistemu. Vozilo ima še vedno First Choice garancijo na pogonski sklop do konca oktobra 2026 in je v vrhunskem stanju. Pridržujemo si pravico do napak in sprememb. Lsdjy E Abhspfx Al Njrk

Stanje: dober (rabljeno), 4-postajni knjižnovezni stiskalnik za lepljenje blokov MURO 4 x 5000 A4/HAD Trdna konstrukcija, vodoodporna plošča in pocinkane komponente. Stroj je v brezhibnem stanju. Lrodpfx Ajy Ehnasl Nek Tehnične specifikacije: Format: 350x320x550 (Š/G/V) Število postaj: 4 Napajanje: 230V Maksimalna poraba moči: 4kW Teža: 102kg Visoka vpenjalna sila, vztrajnika z udobnim oprijemom. Električno sušenje z dvema stopnjama moči: 2 in 4kW Vsak stiskalnik je mogoče nagniti do 45′ Konstrukcija je na kolesih za lažje premikanje.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo 4 kose turbin Schlick - 320 mm, vključno z motorji 7,5 kW. Turbine iz Schlick ROTO-JET RB500 5.2/4/7,5. Tip turbin - 5.2. Količina abraziva - 140 kg/min. Hitrost abraziva na izhodu - 70 m/s. Turbine po generalni obnovi. Stroji za peskanje, peskalniki. Cena za 1 kos - 3000 EUR. Lrsdpfx Asvphf Ujl Nek

Stanje: dober (rabljeno), GUK FA 49/4 zgibalni stroj + GUK FA 49/4 prečni zgibalni modul Stroj je v zelo dobrem tehničnem in vizualnem stanju. Format: 490x690 mm. Hitrost zgibanja: 30–160 m/min Oprema: 4 vzporedne kasete na glavni enoti 4 pravokotne kasete na prečni zgibalni enoti Prva kaseta podaljšana. Prilagoditve kasete so na številčnici. Gladko nastavljiva hitrost. Števec z možnostjo porcij in prikazom hitrosti zgibanja. Rietschle kompresor. Orodni valj z veliko število pripomočkov za perforacijo, biganje in rezanje. Lsdpfx Ajy Ehk Iel Nerk Povišani pokrovi za zvočno izolacijo. Podajanje s pomočjo vakuuma. Mobilni izhod (prosto stoječa izhodna enota) z gladkim upravljanjem hitrosti. Popolna dokumentacija. Obsežen nabor dodatne opreme.

Stanje: dober (rabljeno), Leto izdelave: 2005, skupna dolžina: 4.200 mm, skupna širina: 2.500 mm, skupna višina: 1.800 mm, višina izdelka (maks.): 4 mm, skupna masa: 7.000 kg, Shearing capacity 4 mm, cutting length 3050 mm, throat depth 350 mm, motor 18.5 kW, motorised backgauge, support arms with scale, cutting line illumination, foot pedal, pneumatic sheet holders, new IMEX PLC control, dimensions 420x250x180 cm, approx. 6500 kg Lredpfxstp I S Ae Al Nok

Stanje: novo, Stanje: novo Dobavni rok: cca 10 tednov od naročila Država izvora: Turčija Cena: 10.900 € Leasing obrok: 209,28 € Teža koluta: 1.250 kg Maks. zunanji premer koluta: 1.300 mm Min. notranji premer koluta: 450 - 550 mm Maks. širina koluta: 400 mm Min. širina koluta pri različici s pnevmatično potisno roko: 80 mm Motorizirani pogon Mehansko nastavljiv nastavk koluta s 4 čeljustmi Regulacija hitrosti za odvijanje ter čas pospeševanja in zaviranja Lsdpfx Alswv H Awe Nsrk Fotoelektrični bližinski senzor SICK za kontrolo povešanja S PNEVMATIČNO POTISNO ROKO

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 34.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, prostor za palete: 108 evropske palete, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 4 rows of pallet racking (4 x M35112711-2) - Each 8.5 m long, 3.5 m high, 1.1 m deep - Each with 3 bays, 2.7 m wide - Each with 2 beam levels, compartment load capacity 3,000 kg Included: - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, fastening material - 64 floor anchors (ZZBA1210) - 48 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - Max. 20 working days after receipt of payment - Delivery free to site / installation location - Unloading from the truck is the purchaser’s responsibility using their own forklift equipment - Deliveries are made throughout Germany (mainland only, excluding islands) Lrjdpfx Alev Ukz As Nok - Deliveries to EU countries by individual arrangement

Stanje: rabljeno, Leto izdelave: 2016, Delovno polje: X=3300 mm Y=1280 mm Z=150 mm Višina prehoda Upravljalni terminal: 24" barvni LED zaslon Ročni terminal za upravljanje hitrosti osi Programska oprema: "Woodflash" Vakuumska črpalka 90 m³/h/50 Hz oziroma 108 m³/h/60 Hz Rezkalno vreteno 12 kW HSK F63 (12.000 vrt./min) 12-pozicijski linearni menjalec orodja na levi strani stroja + pick-up prostor Vrtalna glava DH 16 4H 2S: 12 navpičnih vreten 4 vodoravna vretena 2 utorni žagi Lokacija skladišča: Nattheim Ljdpexy Tlwefx Al Njrk

Leto izdelave: 2019, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, CNC machining center with 4 controlled axes and automatic spindle rotation (0-180°). This allows the machine to access all three profile sides of the workpiece without manual repositioning. The machine features a water-cooled spindle with up to 20,000 rpm. It is suitable for processing profile bars or components made of aluminum, PVC, light metal alloys, and steel up to 2 mm. It comes with a manual tool magazine with 9 slots and an automatic tool magazine with 4 slots on the left side of the enclosure. Additionally, there is a second automatic tool magazine with 4 slots on the right side of the enclosure. Positioning of the profile is accomplished using a pneumatically operated left stop, while clamping is handled by 4 robust clamps, which are automatically positioned and controlled. Thanks to a second pneumatic stop on the right, long workpieces—up to twice the length of the machining area—can be processed (oversize processing). Ljdpfxjyzb Eks Al Njrk Furthermore, a movable clamping area facilitates loading and unloading of the workpiece and substantially increases the machinable cross-section. The machine is equipped with the following special accessories: - CamPlus software - Shape software for creating custom machining operations or importing drawings/machining contours - an additional tool magazine - a second stop - a protective hood (completely enclosed) Installation, commissioning, and operator training can be provided by us upon request!