ET 345II TCM Fanuc (Neposredna prodaja stranki)

EMCO ET 345II TCM Fanuc, Bj. 2005

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, moč vretenovega motorja: 13.000 W, največja hitrost vretena: 6.300 obr/min, število osi: 2, This EMCO E45 turning and milling center was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range of up to 6300 rpm. The VDI30 tool turret with 12 stations supports 6 driven tools, enhancing versatility. Equipped with the SINUMERIK 828D OPERATE control system for precise machining and a robust build, it includes a chip conveyor and high-pressure coolant system. Contact us for further details on this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0-6300 rpm • C-axis on the main spindle • Tool turret: 12-position VDI30, axial • Direction logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tool speed: 0-5000 rpm Tailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tube Control & Software • SINUMERIK 828D OPERATE • SHOPTURN conversational programming • USB interface • Network / Ethernet • 10.4" TFT color display • 3D simulation Media & Machine Features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • Documentation Tool measurement (E45) • Measuring arm mounted in the working area • Tool measuring on the turret • Short setup times / precise measurement / cost-efficient Workpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jaws Other (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional Equipment Bar loader / Magazine (SL1200 - as referenced) • Bar length: 850-1200 mm • Bar diameter: Ø 8-95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support surface: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operator side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090-1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • Documentation Spindle extension (for bar loader use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reduction sleeves (3 pieces) • Required for use with SL1200 Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mm High-pressure coolant system • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant supply • Interface & software Robot interface Kledpsyffgrsfx Aqqst • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual mode switching Additional Components • PC keyboard USB (QWERTY) • Machine status LED: Green (automatic), Red (alarm), White (material handling) Installation and Mounting Material • 4× vibration dampers • 4× mounting brackets • 4× heavy-duty anchors Part catcher • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Stanje: rabljeno, Leto izdelave: 2007, TECHNICAL DATA Travel range X 760 mm Travel range Y 510 mm Travel range Z 610 mm Table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm Distance spindle to table min./max. 150/762 mm Spindle taper steep taper DIN 69871 ISO 40 Spindle speeds 10 – 10,000 rpm Drive power (30 min/continuous duty) 11 kW Max. torque 236 Nm Constant power from 500 rpm Coolant tank 190 l Ball-bearing linear guides on X, Y, Z axes Rapid traverse X / Y / Z 30 / 30 / 20 m/min Ksdpfewud Afox Aqqelt Feed rates programmable 3.0 – 7,600 mm/min Positioning accuracy +/- 0.01 mm Repeatability +/- 0.005 mm Automatic tool changer (double arm) 24 Internal coolant supply Chip conveyor

Stanje: zelo dobro (rabljeno), Drilling capacity: 20 mm Spindle mount: FEHLMANN Spindle speeds: 50–6,300 rpm Throat depth: 276 mm Cross table: 530 x 255 mm Klsdpfx Ajuy Sazsqqst Digital readout Various accessories MARCELS MASCHINEN CH

Stanje: rabljeno, Leto izdelave: 1999, x-axis travel: 600 mm y-axis travel: 525 mm z-axis travel: 500 mm Table clamping surface: 1000 x 543 mm Spindle taper: SK 40 Spindle interface: DIN 69871 Spindle speeds - stepless: 20 - 12,000 rpm Feed rates X/Y/Z axis: 20 - 10,000 mm/min Klodpotqqmhjfx Aqqot Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Max. table load: 350 kg Control: HEIDENHAIN MillPlus Head swiveling: +/- 90° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Stanje: rabljeno, Leto izdelave: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Kedoynmpgjpfx Aqqolt Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (between centres including clamping): 130 kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Required floor space approx.: 4.2 x 2.0 m Initially delivered new to a university. Taken over in 2018. Then fully serviced at BEMA and delivered to a one-man operation. The machine is currently being serviced again and the table geometry restored. 2-axis Fagor digital readout retrofitted. - Tailstock with fine adjustment - Internal grinding attachment - Coolant system Accessories available on request.

Stanje: dober (rabljeno), Leto izdelave: 1998, obratovalne ure: 28.500 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 420 mm, pomik osi Y: 330 mm, pomik po osi Z: 240 mm, največja hitrost vretena: 5.000 obr/min, VMC 300 krmilnik Siemens 810D SK40 Klsdpfx Aewlpb Ujqqot 12 orodnih mest v dobrem stanju popolnoma delujoč

Stanje: dober (rabljeno), Leto izdelave: 2005, Horizontal Machining Center Machine Type: Mori Seiki NH 8000 DCG Control: Fanuc 18 imb + Mapps 2 Year of Manufacture: 2005 TECHNICAL DATA: Travel distances: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Kledpfev Nhyljx Aqqjt Rapid traverse (X/Y/Z): 50 m/min Spindle speed range: 10,000 rpm Drive power: 30 / 25 kW Tool holder: BT 50 Tool changer Tool stations: 140 Pallet system Number of pallets: 2 Pallet size: 800 x 800 mm Machine weight: 32,000 kg Space requirements (LxWxH): 9,200 x 4,900 x 3,920 mm Equipment features: Through-spindle coolant (IKZ): bar Chip conveyor High-pressure pumps

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control – Excellent Condition, CE-Compliant! Technical Specifications: - Year of manufacture: 2015 Machine No. 610398 - Clamping surface of milling table: 800 x 425 mm - Number of T-slots: 6 - T-slot width: 14 H7 - T-slot spacing: 63 mm - Max. load: 300 kg - Spindle speed range: 1–4500 rpm - Stepless feed rate: 0–2000 mm/min - Rapid traverse, X and Y axes: 5000 mm/min - Z axis: 4000 mm/min Kedpfx Ajwz Eu Njqqelt - Travel distances X/Y/Z: 600/400/400 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight: approx. 2025 kg - Dimensions (LxWxH): approx. 2 x 2 x 2 m - Main drive motor: AC three-phase motor - Output at 100% duty cycle Accessories and Equipment: - Heidenhain TNC 128 control - Hydraulic clamping vertically and horizontally - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Coolant system About the Machine: For sale is a Kunzmann WF 600M tool milling machine equipped with a Heidenhain TNC 128 control system. The TNC 128 features numerous dialog-guided cycles with graphic simulation for fast and easy data input, e.g. various drilling cycles, thread cutting, bolt circles, linear drilling patterns, rectangular pockets, rectangular studs, and surface milling. This universal milling machine is in nearly new condition. The control is very user-friendly. The machine is equipped with hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple via the swiveling vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested on our premises. Take the opportunity to inspect and test the Kunzmann on site under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Heidenhain digital display Fehlmann cross table KS 322 D Working area: Quill stroke Z-axis: 110 mm Travel of machine head: 450 mm Table to spindle nose: 0–527 mm Quick-change system: SF 32 Spindle motor: 2.9 kW Infinitely variable speed range: 50–6300 rpm Clamping surface: 320 x 670 mm Dimensions and weight: Kledpfjwkrp Eox Aqqet Space requirement (W x D x H): 1.5 m x 1.35 m x 2.1 m Weight: approx. 850 kg

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel Z: 150 mm - Travel X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel X/Y: 97/133 mm BACK WORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 6 kW WEIGHT AND DIMENSIONS - Footprint: 1063/2033 mm - Machine height: 1666 mm - Machine weight: 1700 kg ACCESSORIES - Control: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320 Kjdpfx Aqjuha Umoqjlt