Odlagalni kotel

HESSE by COILTECH CMC P3 1250 400 M D1300

Stanje: rabljeno, Coil Processing Line – Decoiler and Straightening Machine Year of Manufacture: 1991 Nwodpfxoif Sg Ss Andsk Strip Width: 50 to 450 mm Sheet Thickness with Straightener Disengaged: 6 mm Sheet Thickness with Straightener Engaged: 2 mm - Excellent equipment and feeding aids Required floor space (L x W): approx. 7,000 x 3,000 mm Total weight: approx. 11 tons Condition: Good Straightening Machine, HMS Type RS 47-04/1, Serial No. Strip Width, Nominal: 400 mm Strip Width, Max. Passage Width: max. 455 mm Strip Thickness at 400 mm width (steel): max. 1.5 mm Strip Thickness at 400 mm width (copper): max. 2 mm Speed: max. 40 m/min Number of Straightening Rolls: 7 pcs Straightening Roll Diameter: Ø 40 mm Number of Feed Rolls: 2 pcs Feed Roll Diameter: Ø 80 mm Infeed/Throughput Height: 1,500 mm - Straightening rolls hardened, ground, and hard-chromed, supported centrally - Feed rolls hardened, ground, and hard-chromed, with hydraulic lift - Manual straightening roll adjustment - Infeed aid with hydraulically extendable tongue and hydraulically adjustable guide roller - Adjustable side strip guides - All straightening rolls driven via distributor gearbox and cardan shafts - Both feed rolls driven via gearbox and cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or processing thicker material, stroke movement by trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3,600 x 2,200 x 2,200 mm Net weight: approx. 4 tons Decoiler, HMS Type BA 1.5-06/80, Serial No. Coil Weight: max. 8,000 kg Outside Coil Diameter: max. 1,600 mm (with loading saddle) Outside Coil Diameter: max. 2,000 mm (without loading saddle) Coil Flange Diameter: Ø 1,700 mm Inside Coil Diameter, Expansion Range: 460–520 mm Coil Width, Nominal: max. 630 mm Expansion Jaw Width: 750 mm Height of decoiler head above base plate: 1,500 mm - Decoiler head driven by hydraulic motor and gear - Pneumatic overrun brake on decoiler head TWINFLEX - Hydraulic expansion of decoiler head via central wedge slider system - Hydraulic hold-down arm with double pendulum roller, hydraulically driven - Coil loading saddle with 12 t lifting capacity and 300 mm stroke - Decoiler on overfloor travel frame with motorized cross travel Transport dimensions (L x W x H): 3,500 x 1,900 x 2,500 mm Net weight: approx. 5 tons Central hydraulic unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1,600 x 850 x 1,450 mm Net weight: approx. 800 kg Electrical control cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2,800 x 500 x 2,250 mm Net weight: approx. 800 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 350 mm, širina brušenja: 160 mm, vrsta vhodnega toka: trifazni, skupna masa: 740 kg, največja hitrost vrtenja: 2.900 obr/min, moč: 1 kW (1,36 KM), vhodna napetost: 200 V, premer diska: 250 mm, Oprema: dokumentacija / priročnik, Manufacturer: Mitsui MGG CO.LTD Model: MSG-200M Year of manufacture: 1991-4 Maximum grinding width: 160 mm Maximum grinding length: 350 mm Maximum table longitudinal travel: 360 mm Maximum table cross travel: 200 mm Table travel per handwheel revolution: 3 mm/rev Grinding spindle speed: 2,900 rpm, 50 Hz Standard grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speed: 2,900 rpm, 50 Hz Grinding wheel bore diameter: 31.75 mm Nodpfx Answvf Hbedjwk Electric power: 2 HP, 1 kW, 4P, 200 V, 3-phase Weight: approx. 740 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, EUROMAC NOTCHING MACHINE MULTI 220/6R Maximum cutting length: 220 mm Maximum sheet thickness: 6 mm Variable cutting angle: 30° - 120° WITH PUNCHING UNIT 2-station notching and bending machine EUROMAC type Multi 220/6R Press brake, press brake, cutting machine Cutting capacity: steel up to 6 mm at 45 kg/mm² 4 mm for stainless steel Nwsdowqdfxspfx Andjk Station I (notching) Notching angle: 60° to 140° (with special blades: 30° to 140°) Blade length: 220 mm Table dimensions: 950 x 640 mm - Manual angle adjustment by handwheels - Notching angle with integrated blade set from 60° to 140° - Hydraulic clamping of upper and lower blades - Automatic blade gap adjustment - Sheet holding device - Integrated graduated scales in the table - Stop guides with angle adjustment - Operated by foot switch Station II (tool bending device) Press force: 18 tons Table dimensions: 950 x 340 mm Working height: 1100 mm - Adjustable lifting speed - Continuously adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible die with 4 x 90° prisms, length = 415 mm - Upper tool 90°, length = 415 mm Motor power: 4 kW Power supply: 400 V, 50 Hz Dimensions: 1150 x 1000 x 1250 mm Weight: 900 kg

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, Kohler straightening machine 30-400 – year of manufacture 1980 Number of straightening rollers: 9 units Njdsv Hrltspfx Andowk Max. strip width: 400 mm GSW decoiler AHM 1500 – year of manufacture 1999 Both units mounted together on a base frame Further data and images available on request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, nosilnost: 400 kg, doseg roke: 2.550 mm, IRB 7600 je idealen za zahtevne aplikacije, ne glede na industrijo. Tipične uporabe vključujejo ravnanje s težkimi pripravami in deli, obračanje karoserij vozil, dvigovanje motorjev, delo v livarnah ali kovačnicah ter nakladanje in razkladanje strojevnih celic. Uporablja se lahko tudi za dviganje velikih, težkih slojev palet. Lastnosti, kot so visok razpoložljiv navor in vztrajnost, robustna zasnova in močno pospeševanje so temu vodilnemu modelu na trgu prinesle naziv "Power Robot". Leto: 2014 Nosilnost: 400 kg Doseg: 2550 mm Tip: Foundry Plus Delovne ure: 38982 Stanje: Rabljeno & Preizkušeno Krmilna omara: M2004 Učni panel: Vključen Signalni in napajalni kabli: Vključeni Nedpeq Ap Dwofx Andewk Za ponudbo in informacije o možnostih obnove nas kontaktirajte. Kot podjetje PLC Merkezi EOOD imamo na zalogi več kot 300 robotov in sodelujemo z znamkami KUKA, ABB, FANUC in Motoman. Cena ne vključuje stroškov dostave. (Vir: ABB spletna stran)

Stanje: rabljeno, Leto izdelave: 1994, premer usmerjevalnega valja: 18 mm število usmerjevalnih valjev: 19 kosov maksimalna širina traku: 260 mm maksimalna teža tuljave: 2.000 kg/stran dodatni podatki in slike na zahtevo rabljeno, v trenutnem stanju, dobavljivo iz skladišča na zahtevo z obnovo, dobavni rok po dogovoru Nwjdporm Nk Iofx Andsk

Stanje: novo, Leto izdelave: 2026, Stanje: novo Letnik izdelave: 2026 Številka skladišča: 070235 Dobavni rok: september 2026, predvideno Država izvora: Turčija Cena: 4800 € Teža tuljave: 500 kg Maks. zunanji premer tuljave: 1200 mm Min. notranji premer tuljave: 400 mm Maks. notranji premer tuljave: 550 mm Maks. širina tuljave: 300 mm Min. širina tuljave: 50 mm Min. širina tuljave pri različici s pnevmatsko pritiskalno roko: 80 mm Nwedowirz Sopfx Andsk Motor: 0,55 kW Dolžina: 1400 mm Širina: 1200 mm Višina: 1550 mm Teža: 190 kg Motoriziran pogon Mehansko nastavljivo gred za tuljavo s 4 čeljustmi Regulacija hitrosti za hitrost odvijanja ter čas pospeševanja in zaviranja Fotoelektrični bližinski senzor SICK za nadzor proslapljanja ALTERNATIVNE MOŽNOSTI (cene na zahtevo): Različica s pnevmatsko pritiskalno roko Različica brez pogona, z zavoro, z ali brez pnevmatske pritiskalne roke

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, EMAE-85/600 servo podajalna in ravnalna linija z odvijalcem LARA D-3000/1600-MH: Hidravlična miza za nalaganje kolutov za odvijalec Lara D-3000/1600MH Maks. širina: 600 mm Maks.-min. debelina: 0,8 – 4 mm Natančnost pozicioniranja: +/-0,05 mm Maks. premer: 1600 mm Maks. masa: 3000 kg Priklop na stiskalnico CamPositioner_HBPS Nwodpevmmucjfx Andek DieTronic mazalnik traku, širina 500 mm Prenovljena varnostna logika in zaščitne mreže 8/2020 CE certifikat

Stanje: rabljeno, Leto izdelave: 1996, Širina pločevine: 360 mm Teža koluta: 550 kg Notranji premer koluta: 420 - 520 mm Zunanji premer koluta: 1600 mm Skupna potrebna moč: 2,2 kW Masa stroja cca: 2 t Sestavljeno iz: Odvijalec, tip zavorjen, brez lastnega pogona Teža koluta: 550 kg Širina traku: 360 mm Debelina traku: 4 mm Zunanji premer koluta: 1600 mm Notranji premer koluta: 420 - 520 mm Presek traku: 400 mm² Ravnalko, tip R 65/200 EM Premer valjev: 65 mm Širina traku: 200 mm Delovno območje: 0,6 - 4,0 mm Njdoymp Rdjpfx Andewk 7 ravnalnih valjev 2 uvajalna valja

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Feeder/Uncoiler/Straightener LARA DEMAE-10000/100/1400-D – Year 2018 Inspected, production-ready. Complete coil feeding line integrating uncoiling, straightening, and servo-driven feeding in a single compact unit. Designed for continuous operation in cut-to-length, stamping, or deep drawing lines, with high precision and reliability. Robust equipment, ideal for carbon steel, stainless steel, and aluminum. Main components • Motorized Hydraulic Decoiler – Heavy-duty coil capacity – Motorized coil car for quick coil change – Loop control via laser sensor – Loading area protected by safety barriers while maintaining excellent process visibility • Combined Straightener–Feeder – Head with 11 straightening and feed rollers – AC servomotor with PLC control + touch HMI – Automatic strip introduction and release for easy threading • Integrated Electrical and Hydraulic Systems – Standalone electric cabinet – Precise feed control and synchronization with downstream equipment Nwsdpfjy Edfzex Andsk Main technical data – Maximum strip width: 1,400 mm – Sheet thickness: up to 3 mm (carbon steel / aluminum) up to 1.5 mm (stainless steel) – Power supply: 400 V / 50 Hz – Hydraulic pressure: up to 130 bar