Ernst Stroj Za Odstranjevanje Ostružkov Iz Pločevine nakup rabljenega (97.751)

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, Isdpfet Hw Shox Akyjtk disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Leto izdelave: 2015, stanje: dober (rabljeno), Deburring machine, used Manufacturer: NS Maquinas Industrial Iodpoikm Tkjfx Akyjtk Model: DM 1600 DC Year of manufacture: 2015 Working width: 1600 mm Minimum part size: 50x50 mm Power: 8 kW Number of cross-belt stations: 1 Cross-belt speed: 2–8 mm/s Feed speed: 0.6–3.2 mm/s Extraction unit: Donaldson Performs edge rounding and removes sharp edges on both external and internal contours of parts made from stainless steel, steel, or aluminum, which have been cut by a laser, shear, or punching machine. Dimensions: 2730x1740x1940 mm Weight: 1790 kg.

Stanje: rabljeno, Leto izdelave: 2012, Max. working width: 1000 mm Processable sheet thickness: 0.5 – 50 mm Rated current: 82 A Rated power: 44.5 kW Protection class: IP 42 Infinitely variable feed speed: 0–4 m/min Sheet thickness adjustment: electric Tool adjustment: electric Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg Standard Equipment Itedoy Sp Hdspfx Akyjk Line consisting of an SBM-M 1000 D2 and an XL-1000, connected by two conveyors: SBM-M 1000 D2: Double-sided slag removal for plasma- and oxyfuel-cut sheets up to 120 mm Significant savings on tool costs due to mechanical slag removal – eliminates the need for time-consuming and costly grinding Double-sided slag removal eliminates the time-intensive flipping or double handling of often very heavy workpieces Up to 60% labor time savings compared to single-sided machines Modular, compact design in modern machine styling – minimal space required Dry processing The cross-processing principle ensures even tool utilization across the entire working width Upper and lower units are separately electrically adjustable and can be individually switched on/off Innovative tool and feed system allows optimal adaptation to warpage and workpiece tolerances Maximum productivity with consistent processing quality Improved working environment – reduced dust, dirt, and noise emissions Optionally available: conveyor systems, handling systems, robotics, automation, processing tools SBM-XL 1000: Deburring and edge rounding of workpieces up to 120 mm Double-sided processing eliminates the need for costly flipping or double handling of heavy workpieces Simultaneous deburring and edge rounding of internal and external contours Dry processing Simple, intuitive operation Processing units are electrically adjustable and individually switchable Maximum productivity with consistent machining quality Cross-processing principle provides optimal tool utilization across the entire working width Fast and easy tool change within a few minutes Modular, compact machine design with a small footprint Improved working environment – reduces dust, dirt, and noise emissions Optionally available: conveyor systems, handling equipment, automation, special solutions For recurring customer requirements, processing parameters can be quickly and easily recalled using predefined programs Up to 60% labor time savings compared to single-sided grinding machines Additional Equipment – Extraction system

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, - new slewing ring (ball bearing turntable) - outer diameter: 1100 mm Itodpfx Aowt Ry Ujkyok - inner diameter: 878 mm - height: 50 mm - 8 x M16 mounting holes - reputable German manufacturer - suitable for VK 26 models - available immediately

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, - Capacity: 10 – 17 t/h Itodpjq Uk N Sefx Akyok - Height-adjustable feet: 500 – 1050 mm - Machine used very little - In very good condition

Leto izdelave: 1963, stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 512804, 1963 Bobst SP900E met dubbelwerkende stripper in redelijke/goede staat. Goed onderhouden; de afgelopen jaren zijn onder andere de tandwielen, hoofdgrijperkettingen, tegenplaat onder de snijplaat en cardankoppelingen naar de aanvoerkop vernieuwd (originele Bobst onderdelen). De grijperbalken zijn de laatste tijd niet vervangen, maar verkeren nog in goede staat. De kniegewrichten vertonen vrijwel geen slijtage; deze zijn vermoedelijk eerder vervangen en de machine is daarna weinig gebruikt. Er zitten nauwelijks krassen op. Itedpfetyqizsx Akyjk De machine is gedemonteerd opgeslagen in ons magazijn in Zuid-Nederland; dus momenteel niet aangesloten op stroom. Bij serieuze interesse van een potentiële koper zullen wij de machine verder opwaarderen, assembleren en de mogelijkheid bieden deze naar wens uitvoerig te testen. In dat geval bedraagt de prijs 22.000 euro, geladen op uw transportmiddel, EX WORKS.

Stanje: rabljeno, ACCESSORIES 1°) Round Vibratory Finishing Machine Model CD200 * Sound insulation hood * Separation device * Tank dimensions: 200 [L] * Diameter: 1085 [mm] - Weight: 475 [kg] - Required space: 1560 x 1350 [mm] Isdpfxeug U Eqe Akyotk 2°) Drying Tunnel Model BFHL 350 * Weight: 1200 [kg] - Required space: 2470 x 1030 [mm] 3°) Powered Table Model SDT 1500 * Diameter: 1500 [mm] * Max. load on table: 25 [kg] - Weight: 100 [kg] 4°) Waste Treatment by Centrifugation Model ZM03 * Water recycling - Weight: 250 [kg]

Stanje: rabljeno, TECHNICAL DATA - High-performance machine for deburring and polishing small and micro parts - Low-noise operation - Vibration-dampened rotor suspension - no floor anchoring required - Tool-free container fixation - Stainless steel water collection tray - Integrated control with 5 fixed speeds - Number of containers: 4 units - Speeds: 75/100/125/175 rpm - Fuse protection: 16 A - Power: 2.2 kW - Dimensions (W x D x H): 1537 x 1268 x 1041 mm - Weight: 640 kg Working Container Technical Data - Material: Stainless steel - Container volume: 5 l - Usable volume: 3 l - Batch volume: 1 l Iodpfx Aeug U Hnekyjtk - Inner lining: Rubber

Stanje: dober (rabljeno), Leto izdelave: 1991, številka stroja/vozila: ST-B-1661, Offer 24154 Technical Data: - Brush diameter: 250 mm Iedpetwmv Esfx Akyjtk - Brush width: 60 mm - Disc speed: 1500 / 3000 rpm - Drive: 400 V / 1.0 / 1.4 kW - Working height: 900 mm - Required space approx.: W 650 x H 1150 x D 450 mm - Weight approx.: 100 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, NEU +++ NEU 3 & 4 Rand-Blechputzmaschine NEU +++ NEU 1 Mann Bedienung Edelstahlausführung fahrbar Maximales Blechmaß: bis zu 600 x 800 mm Auffangblech unten ausziehbar Maße: 2234 x 630 x 1372 mm, LxBxH Die Vielseitigkeit des Tablett/-Blechreinigers zeigt sich auch darin, dass er sogar 4-Rand-Tabletts mit einer Randhöhe von bis zu 24 mm verarbeiten kann. Verunreinigungen sammeln sich unter dem Reiniger auf einem ausziehbaren, leicht zu entleerenden Regal. Das Gerät ist vollmobil und lässt sich nach Arbeitsende mühelos an den gewünschten Ort bewegen. Die gesamte Konstruktion wird kugelgestrahlt, wodurch die Oberflächen so glatt und hygienisch wie möglich sind Anschluss 400V, 16A-CEE Stecker Neugerät mit Gewährleistung + Ersatzteil Service Qualität vom Fachbetrieb! Ijdpfx Ajw S Slnekyotk Profitieren Sie aus über 35 Jahren Erfahrung! Option: Blechmaß Reinigung bis 600 x 1000 mm Befettung/- Beölung für Bleche Service Paket Lieferservice Einweisung & Inbetriebnahme Besuchen Sie uns!

Stanje: dober (rabljeno), Leto izdelave: 2007, Originalna Heidelberg upogibna naprava do formata 102 Ijdpfxozg Uvqe Akyjtk

Leto izdelave: 2023, stanje: novo, Cable Stripping Machine G.R.S. 3+ Previously: €2,000 – now on special offer for a limited time! New price: €1,200 Technical specifications: Dimensions (W/H/D): 40 cm / 60 cm / 45 cm Weight: approx. 78 kg Colour: Grey Speed: approx. 18 metres per minute Motor: 230V / 3000W, reversible (left/right) Extras: Emergency stop switch Fast and powerful separation of almost all types of cables Itsdpfx Aji Daxxokysk Suitable for stripping cables with a cross-section of 2–80 mm and insulation thickness up to 20 mm. The HSS steel cutting blades provide high performance and are suitable for a wide range of cable and wire types and sizes, including Ölflex cables, underground cables, domestic cables, fire protection cables, and many others.

Stanje: dober (rabljeno), Leto izdelave: 1982, Wheel diameter – max. 600 mm Wheel width – 500 mm Module – max. 15 Module – min. 1 Total power requirement – 2 kW Machine weight – approx. 2 t Itodpswftuxofx Akyok Space requirement – approx. 2 x 1.5 x 2 m The gear tooth rounding process is achieved by the combination of the cutter’s changeover movement and the continuous rotation of the workpiece. The alternating movement of the cutter is accomplished via the rotation of a specially shaped cam that produces either a radius or edge rounding. A set of four cams allows machining of modules ranging from 1 to 16. An adjustment mechanism enables changing between minimum and maximum module values for each individual cam. The rotation of the workpiece is controlled by a three-step gearwheel system that functions as the dividing mechanism. Workpiece locking and rapid positioning of the cutter towards the workpiece are controlled by pneumatic servomechanisms. The practicality and speed of the equipment, along with the wide selection of profiles available on the cams and the capability to process internal gears, make this machine a universal tool suited to both small and large batch production. --> Technical specifications Max. module: 15 Max. diameter: 600 mm Spindle/head rotational speeds: 1450 – 2100 – 2800 rpm Production capacity (teeth per minute): 35 – 50 – 75 Spindle motor output: 2800 rpm – 1.5 HP Workpiece rotation motor output (self-braking): 1.5 HP Automatic system motor output (self-braking): 0.35 HP Cooling system motor output: 0.25 HP Dimensions: 2000 x 1500 mm Total weight: 2000 kg Accessories: - 5x Cams - Dividing gears - Tools - Serial No. 152/0589/94 - Machine with full enclosure - Counterholder

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.400 mm, premer valja: 240 mm, prehodna višina: 80 mm, vrsta nastavitve višine: električni, delovna višina: 870 mm, širina valja: 1.500 mm, višina obdelovanca (maks.): 80 mm, Stroj za nanašanje lepila Bürkle DAK 1400, iz prve roke, v dobrem stanju: – Stroj za nanašanje lepila na eno ali obe strani – Nanašanje lepila na zgornjo in spodnjo stran (stroj s 4 valji) – Robustna industrijska izvedba – Neposreden pogon nanašalnih valjev – Ločen neposreden pogon dozirnih valjev – Nastavitev dozirne širine z mehanskim digitalnim prikazovalnikom – Nastavitev višine z mehanskim digitalnim prikazovalnikom – Nastavljiva vzporednost valjev s pomočjo drsnega spojnika – Vhod z 3 pogonskimi valji za minimalno dolžino obdelovanca 350 mm – Izhod z 3 pogonskimi noževimi diski za minimalno dolžino obdelovanca 350 mm – Pogonski sistem s frekvenčnim regulatorjem 6–30 m/min – Motorična nastavitev višine s pritiskom na gumb – Delovna širina največ 1400 mm – Višina prehoda do 80 mm – Delovna višina nad tlemi približno 870 mm Itsdpfx Aezuv Dfskyjk – 2 nanašalna valja, premer 240 mm – Utori: 20 utorov na palec – 2 dozirna valja, premer 190 mm – Širina valjev 1516 mm – Pogonska moč 3 kW – Stran upravljanja: desna – Barva: RAL 7035, svetlo siva – Letnik izdelave 2007, iz prve roke, v dobrem stanju – Prodaja s sedeža v Karlsruhe / južni Nemčiji – Ogled in preizkusni obrat možen po dogovoru

Stanje: dober (rabljeno), Leto izdelave: 2005, potovalna razdalja osi X: 12.000 mm, pomik osi Y: 3.500 mm, Technical Description - X-axis (Longitudinal Travel of Table): 12,000 mm - Programmable Working Feed: 0.5 - 6,000 mm/min - Rapid Traverse: 20,000 mm/min - Motor Speed: 3,000 rpm - Y-axis (Vertical Travel / Column): 3,500 mm Isdpfx Asyuxd Nskystk - Programmable Working Feed: 0.5 - 6,000 mm/min - Rapid Traverse: 20,000 mm/min - Motor Speed: 3,000 rpm - Rated Motor Torque: 42 Nm Z - W-axis (Spindle Head): - Boring Spindle Diameter: 150 mm - Axial Boring Spindle Stroke (Z): 1,200 mm - Rapid Traverse Z-axis: 20,000 mm/min - Boring Spindle Taper: DIN 69871, ISO 50 - Boring Spindle Diameter: 254 mm - Front Spindle Bearing Inner Diameter: 200 mm - RAM Dimensions: 400 x 400 mm - Axial Boring Spindle Stroke (W): 1,000 mm - Rapid Traverse W-axis: 15,000 mm/min - Total Axial Stroke (Z+W): 2,200 mm - Rated Spindle Motor Torque W and Z-axis: 42 Nm - Number of Spindle Gear Stages: 2 - Spindle Speed Range: 6 – 3,500 rpm - Spindle Motor Power: 60 kW Clamping Plate Fields: - Dimensions: 2 pcs. at 1,500 x 4,500 mm, 1 pc. at 2,000 x 4,500 mm - Load Capacity: 15,000 kg/m² Workpiece Table (Axis V1 - B1 / V2 - B2): - Table Dimensions: 2,000 x 3,000 mm - T-Slot Dimensions: 28 mm - T-Slot Pitch: 180 mm - Table Top Height from Floor: 650 mm - Load Capacity: 40 t Tool Rack Magazine ATC 13-150 R 147 - Max. Magazine Capacity: 147 pcs. - Max. Tool Weight: 35 kg - Max. Tool Length: 700 mm - Tool Taper: DIN 69871 - Tool Change Time: 28 sec. Milling Head with Indexed Vertical Axes Model TTL 2 18 360 - Tool Holder: ISO 50, DIN 69871 EQUIPMENT: - CNC Control: Heidenhain iTNC 530 - Electronic handwheel - Chip conveyor (Year of manufacture: 2023) - CE marking - Documentation

Stanje: novo, Leto izdelave: 2024, Stanje novo Letnik 2024 Številka zaloge 9738 Dobava takoj, prodano vmes Država izvora Turčija Cena 20.300 € Leasing rata 389,76 € Na zalogi 1 Dolžina upogibanja 1530 mm Maks. kapaciteta upogibanja - konstrukcijsko jeklo 6 mm Maks. debelina pločevine brez predhodnega upogibanja - konstrukcijsko jeklo 6 mm Maks. debelina pločevine s predhodnim upogibanjem - konstrukcijsko jeklo 4 mm Premer zgornjega valja 150 mm Moč motorja 4 kW Dolžina 3100 mm Širina 1120 mm Višina 1020 mm Teža 2100 kg 3 valji Asimetrična postavitev valjev - s pred-upogibanjem 2 gnana valja Motorizirana nastavitev stranskega in vpenjalnega valja Digitalni prikaz položaja stranskega in vpenjalnega valja Zgornji valj z možnostjo odklopa naprej Delovanje naprej/nazaj Kaljeni valji Premični upravljalni pult Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI Itjdpfowirulox Akyjk (Simbolna fotografija)

Stanje: novo, Širina pločevine 1050 mm Debelina pločevine 1 mm Premer valjev 56 mm Potrebni prostor cca 1600 x 700 x 1050 mm Oprema: - Zgornji val ročno izklopljiv Posebna oprema: - Kaljeni valji Ijdpfx Asyvvn Aokyjtk

Leto izdelave: 2023, stanje: novo, This true powerhouse can process cables up to an astonishing 120 mm in diameter! With 380 volts and a 3 kW motor, this machine is truly built for industrial applications. The substantial unladen weight of 210 kg is necessary for stability and, of course, the unit stands firmly on its own support feet. Key feature of this machine: Highly flexible operation with cable diameters ranging from 2 mm to 120 mm. Technical specifications: Cutting speed: — Processing capacity: Ø 2 mm — Ø 120 mm Motor power: 3000 watts Iodpfx Akoi A Ixfsyjtk Voltage: 380 volts Weight: ~210 kg Dimensions (cm): 89 W × 58 D × 136 H

Stanje: rabljeno, Tip: David stroj za oparjenje in osmoditev svinj Kapaciteta klanja: približno 40-50 prašičev/uro Največja teža prašičev: do približno 270 kg Ohišje stroja: vroče cinkano ali iz nerjavečega jekla Vgrajena elektro omara Itsdpfjg Swz Hsx Akyok Valj opremljen s 36 posebnimi tolkači Električna moč: 5,5 kW Vgradne dimenzije stroja (v cm): Širina: 240 Dolžina: 340 Višina: 250 Dobavni rok: po prejetem avansnem plačilu je stroj običajno obnovljen in pripravljen za dobavo

Stanje: novo, Sheet width 610 mm Sheet thickness 1.0 mm Frame opening 620 mm Top roller diameter 38 mm Total power requirement manual operation Machine weight approx. 40 kg Space requirement approx. 950 x 270 x 360 mm Sheet metal bending machine featuring: Isdpfoupxi Tjx Akystk - Capacity 610 x 1.0 mm - Swiveling top roller

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 08/2027, vrsta vhodnega toka: trifazni, leto zadnje generalne obnove: 2023, Stroj za čiščenje pločevine Reini 2000 Iodpfezfxy Djx Akyjtk Izvedba iz nerjavnega jekla z gumbom za povratni tek Zmogljivost cca. 650 pločevin/uro z enoto za oljenje pločevin Stroj je premičen Samo pri nas: DGUV V3 pregledano Priklop: 400V, 16A-CEE vtič Mere cca.: 2000 x 1050 x 905 mm (Š x G x V) Rabljeni stroj

Leto izdelave: 1985, stanje: potreben popravila (rabljeno), Removing machine for thread taps Itjdpfx Akji Huvhjyek - Sold as seen, in current condition - Power consumption: too high, machine offered as a source of spare parts - Manufacturer: Electro ARC, removing machine for thread taps or similar tools - Clamping table: 660 x 460 mm - Throat depth: 250 to 480 mm - Column diameter: 70 mm - Dimensions: 930/780/H2045 mm - Weight: 402 kg

Stanje: novo, Leto izdelave: 2025, Working width: 380 mm Working height: 250 mm 1st unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive 2nd unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive Ijdpsv R U Ifofx Akyetk Both units with oscillation: yes Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 1 - 6 m/min Feed motor power: 0.37 kW Vacuum conveyor belt: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Stanje: zelo dobro (rabljeno), Naprodaj industrijski stroj za odstranjevanje ostrih robov nemškega podjetja Rolei Eisenblätter GmbH, model PEF 500. Naprava je namenjena natančnemu odstranjevanju ostrih robov, posnemanju robov in pripravi robov jeklenih, aluminijastih ter drugih kovinskih delov. Proizvajalec: Rolei Eisenblätter GmbH, Nemčija Model: PEF 500 Robustna, jeklena konstrukcija Delovna miza v obliki črke V, idealna za vodenje obdelovancev Električni pogon z varnostnim stikalom Namen: obdelava robov, posnemanje robov, priprava spojev, odstranjevanje ostrih robov po rezanju in obdelavi Stroj je delujoč in v dobrem tehničnem stanju. Zelo stabilna konstrukcija, idealno za delavnice, ključavničarske obrate, orodjarne in serijsko proizvodnjo. Iodpsw R E Hpefx Akystk

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, 1 rabljeni odlubnik Cambio 70 z Mayrhofer mehanizacijo, sestava: Mayrhofer podajalnik hlodovine s 4 tirnicami; pribl. 6 m dolg in 6 m širok Iodpfx Aoxvpq Iekyjtk Faza razdruževanja in podajalnik na glavno linijo Odlubnik Cambio 70 Merjenje dolžine 4 izmetna mesta Skupna dolžina naprave: 45 m Strgalo za odstranjevanje lubja Ogled stroja v obratovanju je možen kadarkoli