Stroj za odstranjevanje skorje – nadomestni del

Valon Kone VK 26

Leto izdelave: 2000, stanje: rabljeno, Dobro ohranjeno vozilo VK 26 MX je naprodaj. Vozilo je na voljo od 05.2027 in si ga lahko ogledate tudi med delovanjem. Ledpfx Aljzkt Dbs Rsrt

Leto izdelave: 2026, stanje: novo, Our belt presses are equipped with two large pressing rollers, which extend the pressing process and ensure exceptionally gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tensioning system and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially developed water nozzles. Only a compressor with 8 bar pressure and a ½” water connection are required for cleaning. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Ledpfx Aov Sq S Nol Rert Technical Information • Rated capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless belt speed control • User-friendly operation • Easy to clean • Mobile machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Feed height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Options: Juice collection tray ISW 100 Automatic juice discharge

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1974, Valonkone VK26M (Series 1974) with discharge table: - Main machine - Feed table (powered) - Discharge table - Control cabinet IMMEDIATELY available from stock Including infeed and discharge tables, workshop-inspected * - Debarking capacity: 10 cm - 61 cm diameter - 4 main separator wheels - 4 cutting knives - Rotor speed = 235 rpm - Rotor opening = 65 cm - 30 kW motor, speed 1500 rpm - Feed rate: 17-42 m/min - 3 m or longer (log length) Dimensions (excluding infeed and discharge tables) L = 9840 mm Infeed table: 3540 mm x 1000 mm x 1900 mm Main machine VK26M: 2530 mm x 2200 mm x 2350 mm Discharge table (motorised table): 3170 mm x 1000 mm x 1300 mm Lsdpstwrp Djfx Al Rsrt REFURBISHMENT: Pos 1: 1 unit - Machine disassembly, washing, sandblasting, priming and painting, repair, assembly Pos 2: 1 unit - Material: knife shafts on rotor with new bearings and sealing (if required) Pos 3: 5 units - Miscellaneous material: pieces of V-belts for rotor drive Pos 4: 1 unit - Gearbox oil Pos 5: 1 unit - Material: abrasives + paints Pos 6: 4 units - Valonkone peeling knives Pos 7: 4 units - Valonkone pre-separator wheels Pos 8: 1 unit - Control cabinet: with 3-phase delta start for 30 kW main motor with 3-phase delta start for 11 kW geared motor with start for 4 kW geared motor feeder with start for 4 kW geared motor discharge Main starter Emergency STOP

Stanje: rabljeno, Valon Kone VK26M Mit Einlauf- und Auslaufband. Lrjdpfx Alevgtz Ne Rjt

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Einwellenzerkleinerer von Weima Modell: WL6S Lrjdpoivpttjfx Al Rot Hauptantrieb: 22 kW

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, approx. 4.5 m long feed and centering table drive via chain from feed motor centers the roundwood in the middle of the rotor debarking machine VK 26 4 main cutters 4 pre-cutters 30 kW main motor 11 kW feed unit non-driven outfeed table machine workshop inspected Ljdpfx Asu Hmacjl Rjrt machine cleaned and newly painted

Stanje: delavnici obnovljeno (rabljeno), B., VK26M (Model Year 1974) with motorized outfeed table: - Main machine - Infeed table (powered) - Outfeed table - Control cabinet Including infeed and outfeed tables, workshop-inspected* Lrsdpjfn Iu Iofx Al Rst - Debarking capacity: 10cm - 61cm diameter - 4 main strippers - 4 peeling knives - Rotor speed: 235 rpm - Rotor opening: 65cm - 30 kW motor, speed 1500 rpm - Feed speed: 17-42 m/min - Timber length: 3m or longer Dimensions (without infeed and outfeed tables): L = 9840mm Infeed table: 3540mm x 1000mm x 1900mm Main machine VK26M: 2530mm x 2200mm x 2350mm Outfeed table (motorized): 3170mm x 1000mm x 1300mm REFURBISHMENT: Pos 1 1 Lot: Dismantling, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material: Knife shafts on rotor, new bearings and seals (if required) Pos 3 5 pcs. Miscellaneous materials: V-belts for rotor drive Pos 4 1 Gear oil Pos 5 1 Materials: Abrasives & paints Pos 6 4 pcs. Valonkone peeling knives Pos 7 4 pcs. Valonkone pre-separators Pos 8 1 Control cabinet: with 3-phase delta start for 30 kW main motor with 3-phase delta start for 11 kW gear motor with start for 4 kW gear motor (infeed drive) with start for 4 kW gear motor (outfeed drive) Main starter Emergency STOP

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 114550, delovna širina: 230 mm, višina skobljanja: 120 mm, število vreten: 6, Planing and Moulding Machine Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control as well as the proven PowerLock quick-change system, and additionally features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment: - 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock Lrsdpfx Ajx Sxfvjl Ret 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock - Working width: 20 – 230 mm - Working height: 8 – 120 mm - Worktable: 2.5 m (including jointer fence) - Top pressure rollers, spring-loaded - Side pressure pneumatically actuated - Frequency-controlled feed unit with brake, feed speed: 5 – 30 m/min - Reduced distance between feed rollers at feed section (400 mm) - Additional feed rollers and reduced roller spacing - Durofer steel roller, self-cleaning - Infeed roller before the 1st bottom tool, pneumatically actuated - Siemens/ Powercom control system The machine is in very good, well-maintained condition. It has been professionally operated, serviced regularly, and will remain in operation until 17 December 2026. Inspection of the running machine is possible at any time by appointment. The tools for the 6 spindles are included in the price. Dismantling and loading will be invoiced separately to the buyer. The technical description and layout of the machine can be found in the documents.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Heating boiler Fröling Output: 1250 kW Year of manufacture: 2002 Burner: Gas or oil burner available on request Ljdpfxjmnqhrj Al Rert

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Balz BG 90 z vstopnim vlečnim blokom Lrjdpfxsygli No Al Ret Še vedno v uporabi Minimalni premer debla: 140 mm Maksimalni premer debla: 900 mm Najkrajša dolžina lesa: 2000 mm Hitrost podajanja: 10 ali 16 m/min Rotor s 5 noži