Desktop Metal 3D-Tiskalnik + Stroj Za Odstranjevanje Veziva Itd. nakup rabljenega (95.257)

Stanje: rabljeno, Leto izdelave: 2008, Working Width / mm Workpiece Height / mm Workpiece Thickness: 1-70 mm Minimum Workpiece Length: 350 mm Minimum Workpiece Length with Magnetic or Vacuum Conveyor: 80 mm Band Filter Unit Volume Ab=900 approx. 350 l Band Filter Unit Volume Ab=1400 approx. 400 l Constant Working Height 1000 mm Feed Speed 2/4 m/min Feed Speed, stepless adjustment: 1.5-8 m/min Operating Voltage 400 VAC Control Voltage 24 V DC, 230 VAC Frequency 50 Hz Compressed Air Connection R 3/8" Minimum Compressed Air Pressure 5 bar Minimum Compressed Air Volume EMSN II +2F 10 NI/min Dkedpfoinwwzex Aflsr Minimum Compressed Air Volume EMSN II /L +2F 80 NI/min Total Electrical Connection See Layout Plan Machine Weight, Working Width 900 mm approx. 4200 kg Machine Weight, Working Width 1400 mm approx. 5100 kg Machine Weight, Working Width 1540 mm approx. 5600 kg Abrasive Belt Dimensions, Sanding Drum AB=900: 1540 mm length x 900 mm width Abrasive Belt Dimensions, Sanding Drum AB=1400: 1540 mm length x 1400 mm width Abrasive Belt Dimensions, Sanding Drum AB=1540: 1540 mm length x 1540 mm width 5. Technical Description The machine operates using a wet grinding process and may only be used with a suitable grinding emulsion. A band filter system is responsible for filtering grinding dust out of the emulsion. The machine is equipped with an elastic grinding drum, which is used for regrinding and burr removal. Two counter-rotating flap brush rollers or, alternatively, stainless steel brush rollers are then used for edge rounding. Two subsequent spring steel brushes are used to remove oxide layers from the cut surfaces. Within the machine, pressure rollers hold the workpieces down on the continuous conveyor belt to ensure they remain in position during the grinding process, which determines the minimum workpiece length of 350 mm. At the machine's outlet, there is an integrated drying unit that dries the workpieces before they exit the machine. The machine is fitted with a continuous conveyor belt for workpiece transport. Special configurations may include an integrated vacuum extraction unit or magnetic conveyor, making it possible to process smaller workpieces. For non-magnetic small parts, a minimum length of 80 mm with a minimum area of 200 cm², and for magnetic small parts, a minimum length of 80 mm with a minimum area of 40 cm² is required. All grinding and brush elements are equipped with spray tube nozzles, which continuously spray the tools with emulsion, enabling the processing of aluminum and its alloys. The grinding residue is carried by the emulsion to the band filter unit and captured by an appropriate filter fleece. ERNST Automatic Sheet Metal Deburring Machine with Wet Grinding System Type EM 5 N/II/L + 2 F 1400 Year of Manufacture 2008 Factory No. 780063 Machine/Equipment: Sheet metal deburring machine with wet grinding system for stamped, laser-cut, and nibble parts of various materials, featuring a flexible sanding drum and two flap brushes for especially high edge rounding.

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Rated power: 8 kW, weight: 2.2 t, with control cabinet. Dsdpfxeilht Us Aflokr

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 851 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MN25724, delovna širina: 1.500 mm, hitrost pomika os X: 4 m/min, vrsta vhodnega toka: trifazni, najv. debelina pločevine: 50 mm, skupna dolžina: 1.300 mm, skupna širina: 2.600 mm, skupna višina: 2.500 mm, skupna masa: 2.600 kg, delovna višina: 950 mm, višina obdelovanca (maks.): 50 mm, širina obdelovanca (maks.): 1.500 mm, The ER 1500 E is a single-sided, top-operating deburring machine featuring the EdgeRacer carousel for precise machining of internal and external contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers high throughput performance of over 300 m²/h, gentle surface processing—even on polished, brushed, and foil-coated sheets—and reproducible results. Thanks to the roller conveyor system of the EdgeRacer ER 1500 E, the grinding heads can also be adjusted below roller table level. The roller transport ensures maximum energy efficiency—the processing costs usually amount to less than €0.01 per square meter of sheet metal processed. With the reversible operation, sheets to be processed can be inserted and removed on the infeed side. Acquire the EdgeRacer deburring machine ER 1500 E as a demonstration unit with only 851 operating hours directly from the manufacturer. Dsdpfx Afoucw Dzjlekr

Stanje: novo, Diameter 150 mm Workpiece length 1300 mm Workpiece width 800 mm Max. grinding wheel diameter 150 mm Speed range 0 - 2830 rpm Dsdpoxab Hpjfx Aflokr Working height 945 mm Head swivels +/- 180° Motor power 1.5 kW Machine weight approx. 230 kg Required space approx. 1435 x 1100 x 1510 mm The "Easy T" is the cost-effective alternative to conventional grinding and deburring machines. Its head, consisting of a grinding wheel and a flap brush, can be swiveled 180°, allowing for quick changeover between the units. The weight-balanced arm enables easy movement of the head over the workpiece, resulting in uniform edge rounding. The worktable prevents even the smallest components from slipping. Equipment: - Deburring and rounding of laser-cut or punched sheet metal parts - Grinding head consisting of a grinding wheel & a flap brush - Grinding head stations can be swiveled 180° - Working area 800 x 1300 mm - Weight-balanced arm for easy swiveling - Non-slip table surface - Ergonomic machine operation via push buttons "On/Off" - Grinding head with stepless speed control via frequency inverter - Handle for ergonomic handling

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ščetkalični in sortirni stroj / Univerzalni stroj s ščetkami Proizvajalec: Leif Lorentz / Universal Finishing Systems Tip: B 4 1000 Dkodpsxrlgqjfx Afler Univerzalna uporaba kot sortirna enota, za odpraševanje in čiščenje obdelovancev ali za brušenje Letnik izdelave: 2005 Delovna širina: 800 mm Širina traku: cca 850 mm Prehodna višina: cca 60 mm 2 ščetkalni enoti od zgoraj, vsaka 1,1 kW, brezstopenjska regulacija hitrosti, 350-900 obr./min Opremeljeno s ščetinami kot na voljo. Dimenzije stroja: cca 2400 x 1300 x 1700 mm

Stanje: novo, Brushes - Diameter Ø 250 mm Brush width 40.0 mm Speed range 2850 rpm Operating voltage 400 Volt Total power requirement 1.3 / 1.8 kW Machine weight approx. 36.0 kg Space requirement approx. 415 x 467 x 356 mm Features: Djdsxaamnjpfx Aflokr - Deburring of single parts and small batches - Deburring of straight round, rectangular, and square tubes, as well as flat materials - Heavy-duty, durable industrial design - Maintenance-free motor - Long service life and smooth operation due to balanced rotor - Equipped with high-quality ball bearings - Storage shelf for safety goggles - Incl. 1 multipurpose wire brush, wire diameter 0.35 mm - Operating manual included

Leto izdelave: 1979, stanje: nepreverjeno (rabljeno), Hurth ZEA1 Gear Deburring Machine -WKG 475- Offered here is a gear deburring machine from Hurth. Dksdpfxjhg Nuio Aflsr Technical Data: Manufacturer: Hurth Model: ZEA1 Year of manufacture: 1979 Adjustability of processing unit: 150 mm Tool outside diameter: 190-205 mm Workpiece outside diameter: 20-120 mm Workpiece length: 150 mm Gear width: 50 mm Beveling module: 1-4 mm Bevel width: 0.7 mm Weight: 2 t

Stanje: dober (rabljeno), Leto izdelave: 2005, delovna širina: 1.000 mm, Deburring Machine Make: LISSMAC Model: SBM-B 1000 Year of manufacture: 2005 Technical Data Manufacturer: LISSMAC Model: SBM-B 1000 Year: 2005 Pass-through width: 1000 mm Sheet thickness: max. 20 mm Minimum sheet length: 150 mm Minimum sheet width: 100 mm Speed: 1400 rpm Brush motor power: 4 x 7.5 kW Dimensions: approx. L 2.20 x W 1.50 x H 1.50 m Djdsvgb Hgepfx Aflokr Weight: approx. 1.5 t Equipment - Automatic material feed - Infinitely variable feed rate 0–10 m/min - Sheet thickness adjustment: handwheel with worm gear and scale, stepless - Brush depth adjustment: handwheel with worm gear and scale, stepless - Various accessories - Operating manual All information subject to change without notice. A demonstration is possible at any time in our showroom.

Stanje: novo, Leto izdelave: 2025, Working width 1500 mm Workpiece thickness – max. 0.5 – 50 mm Dimensions 3300 x 1500 x 1800 mm Feed rate stepless 0–4 m/min Total connected load 20.4 kW Machine weight approx. 2800 kg The SBM-L G1S2 grinding and deburring machines are designed for double-sided deburring and edge rounding of workpieces in a single pass. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser-cut parts, and stamped parts. The L series is equipped with three processing units each on both the top and bottom sides. Workpieces made of stainless steel, steel, aluminium, or non-ferrous metals can be processed on the top, bottom, or both sides as required. Double-sided sheet metal processing and edge rounding in just one operation enable time savings of up to 60%. Seamless integration with automation solutions or incorporation into production lines is also possible. The machine design ensures ergonomic operation and a pleasant working environment—free from dirt, dust, and noise. Comprising: - SBM-L 1500 G1S2 evo grinding machine - 4x SBM 1500 sanding belts with rib P60 Co - 2x SBM-L 1500 sanding belt L=4123 W=70 P80 Co - SBM-M/L 1500 sound insulation - LIServ 4.0 package evo - Camera set MP - DDE 3002 dry extraction unit Dksdpfx Ajx H Tvfsflor - DDE 3002 standard piping The machine is available ex-stock Niederlangen for immediate delivery.

Stanje: rabljeno, Söderhamns rotorski odstranjevalec skorje Cambio 85 - 66 - A Premer: 10 - 66 cm Dsdpfextc Afox Aflekr Glavni motor: 30 kW

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, HÄWA / SWT Maschinenbau Odrtevalnik – Novo -- ---Demonstracijski stroj --- na voljo takoj - Izdelano v Nemčiji - Tip H256 / 800 - Izdelano iz težke varjene jeklene konstrukcije - 4 pari pogonskih koles za hlode - 1 razdeljen, nazobčan par pogonskih koles za hlode - Pogon hloda frekvenčno reguliran Dsdexx Am Ujpfx Aflokr - Frezalna roka iz težke jeklene konstrukcije - Frezalna glava: delovna širina 300 mm, udarne letve, udarna rezila in vodilni obroč - Frezalna glava opremljena s trdimi kovinskimi elementi - Hidravlično spuščanje frezalne glave - Pomik frezalne glave frekvenčno reguliran - Pogonska kolesa za hlode 800 mm - Premer hloda 0,2 m – 1,0 m - Dolžina hloda 1,0 m – 6,0 m - Skupna priključna moč 35 kW - z HBC radijskim daljinskim upravljalnikom

Stanje: novo, Leto izdelave: 2025, Haewa / SWT Maschinenbau Voziček izdelan iz težke varjene jeklene konstrukcije 4 pari pogonskih koles za deblo 1 razdeljen, zobat par pogonskih koles za deblo Pogon debla z 2 hitrostma Hidravlika za izmetač Rezkalna roka iz težke jeklene konstrukcije Rezkalna glava: delovna širina 300 mm, udarne letve, udarna rezila in obroč za vožnjo Rezkalna glava opremljena s trdo kovino Hidravlično spuščanje rezkalne glave Pogonski sistem vozička reguliran s frekvenco, v = 0 – 60 m/min Dkjdpfx Afocrp Akslor Tip H 249 / 800 Pogonska kolesa za deblo 800 mm Premer debla 0,2 m – 1,0 m Dolžina debla 2,0 m – 6,0 m (tudi daljše) Skupna priključna moč 35 kW Z upravljalno ploščo

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 20 mm Rotational speed 2850 rpm Angle range 0 - 60° (stepless) Dodpfxjppgcvj Aflskr Machine weight approx. 19.5 kg Maximum chamfer width 20 mm + face machining Designed for chamfering and deburring straight edges, for so-called FACING – the removal of an unwanted material layer on the end face of the workpiece, such as occurs during flame cutting of sheet metal. Specifically developed for producing visible bevels and weld seam preparations. Powerful electric drive for extreme loads. * High-performance motor * Stepless adjustment of the working angle in the range of 0° - 60° * FACING – edge processing at 0° angle for removing unwanted material layers after flame cutting * Unique mechanical scale for setting chamfer width for greater precision * Very compact and ergonomic design for high working productivity * Surrounding protective frame to prevent damage and provide versatile grip options * With suitable accessories, pipes from D=150 mm can also be machined * Additional adjustable handle - Chamfer width (hypotenuse): 0 - 20 mm = 400 MPa / 0 - 16 mm = 400 MPa - Motor: 1100 W We are also pleased to offer you an optional pipe beveling attachment (D=150mm) for this device.

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 18 mm Angle range 15° - 50° Machine weight approx. 110 kg Beveling System UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker is one of the most powerful automatic-feed beveling machines available on the market. It is suitable not only for workshop use but also for on-site assembly. The machine features a stepless adjustable bevel angle system. Thanks to its specially designed drive system, the UZ18 Hardworker is suitable for tougher materials as well. The machine is equipped with automatic feed, making operation with the UZ18 Hardworker highly comfortable. * For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 70 x 150 x 6 mm Dkedpok Egrtjfx Afljr * Suitable sheet thickness range: 6 – 40 mm * The bevel angle can be easily and steplessly adjusted from 15° to 50° without the need to replace any parts * Double-sided beveling (X, K geometry) without material handling * Easy connection to a 3D manipulator for simplified operation and handling * Silent operation * Equipped with automatic feed * Suitable for stationary or mobile use * The machine processes large workpieces without additional support at a speed of 1.9 m/min * Smaller workpieces are inserted directly into the machine - Max. bevel width (hypotenuse): 18 mm - Steplessly adjustable angle: 15° - 50° - Sheet thickness range: 6 – 40 mm - Motor: 750 W - Feed speed: 1.9 m/min - Weight: 110 kg - Dimensions: 438 x 719 x 644 mm We are happy to offer you an optional mobile 3D manipulator for this unit upon request.

Stanje: novo, Diameter -- mm Workpiece width -- mm Workpiece length -- mm Chamfering System UZ30 EXPRESS Dkedpfor I E Exjx Aflor Maximum chamfer width 30 mm with automatic feed Stationary UZ30 EXPRESS is one of the best solutions for chamfering large and small batches, as well as small parts or long and narrow flat bars. The UZ30 EXPRESS can be used not only for chamfering, but also for deburring. Thanks to the unique geometry of the milling cutter, the feed rate can be adjusted to up to 3.5 m/min. For longer workpieces, it is possible to equip the machine with an additional infeed and outfeed table, increasing the working area to an impressive 2,824 mm. - Designed for chamfering steel, aluminum, copper and other materials, flat bars, pipes, and welding bevels - Chamfering performed by high-quality milling (mirror finish) - Feed control via rotary knob - Cutter speed controlled via frequency inverter - Further optional accessories available for pipe chamfering - Option to extend the work table to a total of 2,824 mm - Fast and precise machine adjustment via gauge Technical Data: Approximate values of maximum chamfer width: at 30° – 30 mm, at 45° – 20 mm, at 60° – 17 mm Adjustable chamfer angle: 30° – 60° (constant) Application range – sheet thickness: 3 – 100 mm Pipe chamfering: OD 102 mm – OD 156 mm Milling motor power: 4,000 W Milling head speed: Adjustable via rotary knob (frequency converter) Feed rate: 0.6 – 3.5 m/min Weight: 400 kg Dimensions: 825 x 1200 x 1615 mm Number of indexable inserts: 5 pieces

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 15 mm Angle range 15-50° Sheet thickness 6-40 mm Total connected load 1.5 kW Feed speed 3.5 m/min Dimensions 530 x 395 x 860 mm Machine weight approx. 94 kg The UZ15 RAPID machine is one of the fastest bevelling machines with automatic feed on the market. It is suitable not only for workshops, but also for on-site assembly jobs. It features an infinitely variable bevel angle adjustment system. Additionally, the machine is equipped with an automatic feed, making operation with the UZ15 Rapid very convenient. - Suitable for conventional steel (up to a strength of 600 MPA/87,022 PSI), brass, copper, and aluminium materials - For bevelling workpieces with minimum dimensions of 70 x 150 x 6 mm - Operating range for sheet thickness 6–40 mm - The bevel angle can be easily adjusted steplessly from 15° to 50° without changing any parts Dkodok Uqhaspfx Afljr - Double-sided bevel (X, K) without material handling - Simple connection to the 3D manipulator for easier operation and handling - Silent operation - Equipped with automatic feed - For stationary or mobile use - The machine can work with large workpieces without any support at a speed of 3.5 m/min - Smaller workpieces can be inserted directly into the machine - Discounted price when purchasing the UZ15 RAPID together with the 3D manipulator

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 3 mm Spindle speed 3600 rpm Angle range 30 - 60° (stepless) Machine weight approx. 31 kg Space requirement approx. 530 x 420 x 410 mm Dksdpfx Ajppgcreflsr Maximum chamfer width of 3 mm - Mechanically adjustable chamfer angle Designed for deburring and chamfering steel parts and workpieces. Suitable for processing various materials. Robust and stable machine construction. * Scale for setting machining depth * Safety cover * Adjustable machining angle * For steel, stainless steel, aluminium and other materials * Precise, heavy-duty and extra-long mechanical guide - Number of indexable inserts: 5 pieces (four-edged) - Feed: manual

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 12 mm Angle range 30/45/22.5/37.5/50 ° Machine weight approx. 30 kg Beveling System UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest beveling machines with automatic feed on the market. Thanks to its compact size and low weight, it is suitable not only for workshops but also for on-site assembly. The machine is equipped with an automatic feed, making operation with the UZ12 ULTRALIGHT very comfortable. * For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 65 x 60 x 3 mm * Operating range plate thickness: 3 – 35 mm * Beveling pipes from an internal diameter of 95 mm * Variable adjustment of the desired bevel via interchangeable holder kit for each given angle * Double-sided bevel (X, K) without material handling * Quiet operation * Equipped with automatic feed * For stationary or mobile use * The machine processes large workpieces without any support at a speed of 1.8 m/min * Smaller workpieces are placed directly into the machine * Lightweight and compact design, can be handled by a single operator * Thermal motor protection - Max. bevel width (hypotenuse): 12 mm Dksdpeppgcyefx Afljr - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (interchangeable KIT) - Working range plate thickness: 3 – 35 mm - Motor: 400 W - Feed rate: 1.8 m/min - Dimensions: 470 x 294 x 523 mm Optionally, we would be glad to offer you a 3D manipulator (mobile) for this device.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, We are offering a highly productive 3D printer for industrial series production: Trumpf TruPrint 3000 G02 with the following options: Zirox sensor, single laser, powder bed monitoring Trumpf TruPrint 3000 including filtration unit Serial number: S0721Q0022 Laser beam-on hours: 17,508 hrs The system was last used with AlSi10MG aluminum The 3D printer has already been disassembled by the manufacturer. Disassembly and functional protocols are available, confirming the machine was operational prior to disassembly. All axes have been secured professionally. The machine can be transported on a standard truck. Accessories: - 4 dosing containers - 1 build cylinder Dkodpfxovu Ticj Afljr - 1 overflow container - Various spare parts such as protective glass, etc. - Manuals A pallet truck from Armanni CAR.Elev. for container handling is also in stock and can be optionally offered. Quicker to high-quality 3D components D1. Machine Concept The TruPrint 3000 is a universal medium-format machine with external part and powder management for industrial manufacturing of complex metal components via 3D printing. Its large build volume offers great flexibility regarding the size, quantity, and geometry of various applications. Technical Data TruPrint 3000 Build volume (cylinder) mm x mm: Ø 300 x H 400 Processable materials5 – Weldable metals in powder form, such as stainless steels, tool steels, aluminum, nickel-based, cobalt-chrome, copper, titanium, or precious metal alloys. Build rate6 cm3/h: 5 – 60 Layer thickness7 μm: 20 – 150 Laser source (TRUMPF fiber laser) W: 500 Beam diameter μm: 100 – 500 O2 concentration ppm: 100 Exposure speed (powder bed) m/s: 3 Monitoring – Condition Monitoring, Performance Monitoring Option: Powder Bed Monitoring Preheating (substrate plate) °C: 200 Shielding gas – Nitrogen, Argon Power supply V / A / Hz: 400 – 32 – 50/60 Dimensions (incl. filter) mm: 3385 x 1435 x 2225 Weight (incl. filter) kg: 4300 Subject to change. The details in our offer and order confirmation are binding. Technical data TruPrint 3000 Table 3

Stanje: dober (rabljeno), Leto izdelave: 2014, Odkrojni stroj Maja ESB 4434/1 GV Stroj za odstranjevanje kože perutnine MAJA ESB 4434/1 GV je primeren za varno, avtomatsko odstranjevanje kože s svežih kosov perutnine preko dovodnega traku. Ponuja naslednje prednosti: - Popolno odstranjevanje kože perutninskih kosov z odličnim izkoristkom. - Vsestranka uporaba za odstranjevanje kože z različnih delov piščanca in purana, primernih tako za suho kot mokro hlajenje. - Nežen proces odstranjevanja kože brez poškodb občutljivega perutninskega mesa in kože za višjo kakovost izdelka. - Največja varnost upravljavca zaradi avtomatskega odstranjevanja kože preko dovodnega traku. - Stroj za odstranjevanje kože MAJA v skladu z veljavnimi CE predpisi. Proizvajalec: Maja Model: ESB Leto izdelave: 2014 Širina reza: 385 mm Moč: 50Hz / 400V / 0,88kW Dimenzije stroja (D x Š x V): 1.800 x 750 x 1.250 mm Teža stroja: 250 kg. Dodpfey Ed Txjx Afljkr

Leto izdelave: 2023, stanje: novo, Funkcionalnost: popolnoma funkcionalen, This machine, model KM13, cuts electric cables with a diameter ranging from 20 to 120 mm. The different diameters can be easily adjusted by turning the hand wheel up or down. The machine operates at a speed of 25 m/min. Its dimensions are: length 600 mm, width 600 mm, and height 1600 mm. The machine weighs approximately 200 kg. It is powered by a 380V-50Hz, 3 kW electric motor with a reduction gearbox. The cable is cut from both sides, allowing the copper core to be easily removed. Spare parts such as blades, drive components, bearings, etc. are available as well. If desired, we can also perform maintenance on these machines. This is a machine that is ready to use immediately and easy to operate. Dedpfxsq E Ti Ho Aflekr If you would like to test it, please bring your own cable.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, This robust professional cable stripping machine, type KM1-F, cuts electrical cables with a diameter ranging from 1 to 70 mm. This model features speed regulation by means of a frequency inverter. - The blades are hardened, so they do not become blunt quickly when stripping armored cables. - There are 15 different cable feed slots. - The rollers are grooved on the inclined surfaces, providing better grip on the cables. - The cable is cut from both sides, making it easy to remove the copper core. - You can also strip rubber and flat cables with this machine. - The machine meets all safety requirements. - A comprehensive service manual and user instructions are included. - The manual also includes maintenance instructions. Djdpfx Afoyfw Egelskr Technical specifications: Mains voltage: 230 V ~ 50 Hz Power: 2200 W with gearbox drive Dimensions: 60 cm long x 75 cm wide x 90 cm high Machine speed: adjustable Output: Depending on cable type, between 400 and 1200 kg/day Weight: 185 kg Price includes VAT Spare parts such as blades, drives, bearings, etc. are also available. Maintenance can be carried out by us upon request. A machine that is ready to use immediately and easy to operate. If you would like to test it, please bring your own cable.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2316-01, delovna širina: 600 mm, Тип 41 Серия 600 WRD Dsdpfx Aor Nbpbjfljkr Работна ширина 600 мм Идеална машина за обезрязване и финиширане на метални изделия Оборудвана с шлифовъчна лента и диск/четков агрегат

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 630056, skupna masa: 5.200 kg, vhodni tok: 95 A, ERNST Neptun EBB 1500 je stroj za odstranjevanje ostružkov in obdelavo robov pločevine, namenjen čiščenju ter zaokroževanju robov kosov, rezanih z laserjem, izsekanih ali izžganih. Ta stroj omogoča izmenično obdelavo različnih materialov, kot so jeklene pločevine, aluminij, pocinkane pločevine ali materiali, prevlečeni z zaščitno folijo, zahvaljujoč fleksibilnemu valju za odstranjevanje ostružkov in kompletu krtač. Dksdpoxmhxxsfx Afljr Glavne značilnosti ERNST Neptun EBB 1500: • Večnamenskost: Obdeluje kose iz različnih materialov brez potrebe po stalni zamenjavi brusnih elementov. • Funkcionalnost: Uporablja fleksibilni odstranjevalni valj in komplet krtač (jeklenih ali lamelnih) za mehčanje ali zaokroževanje robov. • Preciznost: Omogoča enakomeren, enak polmer na vseh robovih. • Idealna rešitev za: Podjetja, ki obdelujejo različne materiale in zahtevajo obdelavo robov po rezanju.

Stanje: rabljeno, Leto izdelave: 2008, delovna širina: 800 mm, TimeSavers grinding machine suitable for surface processing of workpieces up to 800 mm width. Workpiece fixation is achieved by vacuum. The machine features 2 stations: an abrasive belt and a brush. This equipment is suitable for grinding, edge rounding, oxide and slag removal, and final finishing. Technical specifications: Model: Timesavers 41 series 900 WRD Year: 2008 Max. workpiece width: 900 mm Max. workpiece height: 80 mm Min. workpiece height: 15 mm Feed speed: 1 – 10 m/min (adjustable) CNC controller: adjustable speed, workpiece dimensions, grinding pressure, and more. Other features: integrated heater, allowing operation in cold environments. Dodjvyhttjpfx Aflokr If you have any further questions, please feel free to contact us.