Beco Brevis 100 nakup rabljenega (25.706)

Stanje: novo, premer valja: 100 mm, širina valja: 35 mm, Included in the scope of delivery: 01x Swivel caster, new Wheel material: Polyamide wheel Plain bearing with bearing marks Wheel colour: cream white Todsrtplrepfx Aiqjc Total height: 130 mm Wheel diameter: 100 mm Wheel width: 35 mm Swivel radius: 360° Plate dimensions: 105 x 80 mm (W x D) Bolt hole pattern: 80 x 60 mm (W x D) Bore diameter: approx. 11 mm Number of mounting holes: 04 pcs. Weight per unit: approx. 0.700 kg Advantages over PA wheels: - PA wheels are extremely wear-resistant. - They do not leave any marks on the floor. - PA wheels offer very low rolling resistance. General information about the item: This item is offered for collection only. If you wish to have this item shipped or transported, additional costs will apply. These costs vary depending on the delivery location and scope and can be quoted upon request.

Stanje: dober (rabljeno), skupna masa: 41.000 kg, Leto izdelave: 2004, obratovalne ure: 5.500 h, Single-toggle jaw crusher Feed opening: 1,000 x 650 mm Tedotpaktjpfx Aiqoc Final product: approx. 0/70–0/200 mm Feed hopper, vibrating feeder Electric drive with 220 kVA generator Side and main discharge belts Overband magnet

Stanje: rabljeno, Technical Data for Pallet Rack Beam: Racking system: Stow Tsdpfx Aedbd I Aoiqjc Type: Pal Rack OP Included in delivery: 01x Pallet rack beam, used Material color: blue Box section: 100 x 50 mm Design: front beam 1,450 mm clear span Max. load capacity per pair of beams: 1,800 kg with evenly distributed load 02x Safety pins, used Finish: fully galvanized For securing the horizontal beams To prevent unintentional lifting Our range of services: (Prices on request) - Assembly and installation Our general installation terms and conditions apply - Rack inspection Inspection according to DIN EN 15635 Conducted per the requirements of BGR 234 (visual inspection) for all racking systems - Delivery with our own fleet (unloading not included)

Stanje: zelo dobro (rabljeno), Portal machine Movable table (workpiece), movable working head (horizontal workpiece) Control: Power Control, WoodWOP software Workpiece drive with no. 3 transport belts Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 50 Chip conveyor belt Total connected load (kW): 60 Tsdsdg Itnspfx Aiqec WORKING UNITS (VERTICAL): Drilling units with vertical spindles: No. 6 Independent vertical drilling spindles: No. 40 x 6 (total No. 240) Drill head power: No. 6 x 2.7 kW WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles: No. 4 (4 x 2.7 kW) Horizontal drilling spindles - right side: No. 13 x 2 (total No. 26) Horizontal drilling spindles - left side: No. 13 x 2 (total No. 26) High-pressure glue injection and dowel insertion nozzles (right side): No. 8 High-pressure glue injection and dowel insertion nozzles (left side): No. 8 Dowel magazine for automatic dowel feeding: No. 2

Leto izdelave: 1987, stanje: rabljeno, x-travel 2800 mm y-travel 800 mm z-travel 1300 mm Machine weight approx. 3 t S T I E F E L M A Y E R Manually movable 3D measuring and marking machine Model: System C - 100 Year of manufacture: 1987 Measuring stand No. 314 710 87 Working area: Tsdet Hw I Njpfx Aiqoc X-axis (horizontal): approx. 2,800 mm Y-axis (cross): approx. 800 mm Z-axis (vertical): approx. 1,300 mm Table size: 3,500 x 1,000 x 360 mm Working height above floor: 750 mm Mounted rotary table, rotatable: 800 mm Cross section of measuring carriage: 100 x 100 or 60 x 60 mm Table height above floor: 700 mm Table thickness: approx. 360 mm Total height of assembled measuring machine: approx. 2,800 mm Weight: approx. 3,000 kg Special equipment / Accessories: • Side-mounted measuring carriage system C with cross-section 100 x 100 mm or 60 x 60 mm for Y measuring arm • Mounted rotary table with vernier scale 0 – 360°, can also be easily removed • Installed measuring counter Type MZ 2000 as digital display with network connection and RS 232 interface • 2 longitudinal rulers as workpiece stops, approx. 2,400 mm long • 6 height-adjustable leveling feet • Swivelling storage tray, extensive marking accessories • RENISHAW measuring probe Condition: Good – from stock, powered Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice We look forward to receiving your order. We also have other measuring machines and surface plates in various sizes in stock. Please contact us for further information.

Stanje: rabljeno, Leto izdelave: 1985, Drilling capacity in steel (diameter): 30 mm Tjdpjt Hxa Hsfx Aiqec X-travel: 850 mm Y-travel: 435 mm Control: HEIDENHAIN TNC 150 Total power requirement: 16 kW Machine weight approx.: 3,500 kg Space requirement approx.: m F E H L M A N N (Switzerland) CNC-controlled precision drilling and milling machine Model: PICOMAX 100 CNC – 2+ Am Year of manufacture: 1985 16 085109 X-axis (longitudinal): 850 mm Y-axis (lateral): 435 mm Z-axis (vertical): 210 mm Table size: 500 x 1,570 / 390 x 1,280 mm Min./Max. distance vertical spindle - table top: 140 / 690 mm Vertical adjustment of the drill head (motorized): 540 mm Spindle overhang: approx. 450 mm Spindle mount: SF 32 Drilling capacity in steel: 30 mm Vertical spindle stroke (quill): max. 210 mm Spindle speeds (infinitely variable, 2 ranges): 25 – 5,600 rpm Workpiece weight: 600 kg Feed rates XYZ: 1 - 8,000 mm/min Drilling feeds, 6 automatic: 0.03/0.07 to 0.4 mm/min Rapid traverse XYZ: 4/8 m/min Spindle drive: 6 kW Total drive approx.: 16 kW - 380 V - 50 Hz Weight approx.: 3,500 kg Accessories / special equipment: • HEIDENHAIN CNC 2-axis contouring control, type TNC 150, with color monitor, graphics, all standard subroutines and cycles, tapping cycles, manual control unit or electronic handwheel, RS 232 interface, etc. The drill spindle axis (Z) can be operated manually or via CNC control. • Drilling depth can be preset via a 12-position turret stop, with digital display on the monitor. • Drill head can also be programmed via a height positioning device in 3 preset positions. • Precision coordinate table for X/Y CNC axes with hardened ball screws • Equipped with quick-change tool system, various tool holders, drill chucks, coolant system, etc. Condition: good to very good – demonstrated under power Delivery: ex-stock, as inspected Payment: strictly net, upon receipt of invoice

Stanje: zelo dobro (rabljeno), 500 kosov, rešetasta pločevina za težke obremenitve, 100 x 100 cm Uporabljen artikel, zelo dobro stanje, glejte slike. prevlečena z vročim cinkom. Nosilnost: približno 450 kg/m² Dimenzije: 1000 x 1000 mm Velikost mreže: 20 x 30 mm Višina nosilnih palic: 45 mm Debelina materiala nosilne palice: 3 mm Pogajanje o ceni: 45 EUR neto za kos, prevzem v skladišču. Večje količine na voljo po dogovoru! Na voljo je veliko rešetastih ploščev z različnimi velikostmi mreže in nosilnimi palicami! Izdelek je na zalogi. Transport in montaža sta možna po dogovoru. Ogled je možen kadarkoli po predhodnem dogovoru. Dodatne informacije na zahtevo. Nenehno imamo na zalogi več kot 5000 tekočih metrov regalov za palete različnih proizvajalcev. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter do medčasne prodaje! Glejte naše splošne pogoje, vse cene so brez DDV, prevzem v skladišču.) Lenox Trading – vrhunska skladiščna tehnika in regali za težke obremenitve, rabljeni in novi Opis izdelka: Iščete visokokakovostne skladiščne regale za nakup? Lenox Trading je z okoli 100 zaposlenimi eden največjih trgovcev z novo in rabljeno skladiščno opremo v celotnem območju DACH (Avstrija, Nemčija, Švica). ⚡ HITRO DOVOLJENO: • Več kot 10.000 tekočih metrov regalov, ki so takoj na voljo. Tedpfx Aistuvdzjqjc • 20.000 m² skladiščnih ploščadi in jeklenih konstrukcij, takoj na voljo. • Tedensko 30–50 tovorov s polpriklopniki za največjo izbiro. 📦 NAŠA PONUDBA (UGODNO NAKUPOVANJE V SPLETU): Ne glede na to, ali kupujete regale za palete, regale za težke obremenitve, visoke regale, police ali regale za IBC-posode – dostavljamo in montiramo po vsej Evropi z našo LASTNO ekipo! Vključno z CAD-načrtovanjem, transportom, demontažo in montažo. 🏭 VRHUNSKE BLAGOVNE ZNAMKE, RABLJENE IN IZ PRODAJE STEČAJNEGA POSTOPKA: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (tip MPB, tip E, regali za težke obremenitve Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Regali z iztegnjenimi rokami (Elvedi Kragarmregale, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 NAŠE DRUGO POSLOVANJE: SPLETNE AUKCIJE IN PRODAJA Pri demontažnih in čistilnih delih ponujamo celovit in brezskrben paket: 1. Enoten nakup: nakup trgovskega blaga, opreme in celotnih skladiščnih zalog, vključno z popolnim čiščenjem prostora. 2. Prodaja na dražbi: izvedba dražbe v našem imenu. Naša storitev, ki jo izvajajo lastni zaposleni: katalogizacija, priprava pisarne, ogled, izročitev blaga, logistika, demontaža in popolno čiščenje prostora. Ne glede na to, ali ste najprej izvedeli za naše regale za težke obremenitve ali iščete pocinkane regale za težke obremenitve / regalski sistem za težke obremenitve – zagotavljamo najboljše pogoje. Kontaktirajte nas za neobvezujočo ponudbo!

Stanje: pripravljen za uporabo (rabljen), Mešalni stroj, dvo-gredni mešalnik, Z-krak mešalnik Mešalni stroj, dvo-gredni mešalnik, Z-krak mešalnik, rabljena oprema Skupne dimenzije: 1150 x 750 x 1520 mm Tedpfju Hknksx Aiqjc Teža: 355 kg Velikost lijaka: 530 x 500 x 400 mm Električne specifikacije: 400V

Stanje: rabljeno, vsak z 32 postajami s ločilno ploščo primerno za 64 blokov: - dimenzije 1 celoten blok na postajo -> ± 1070 mm x 530 mm - dimenzije 2 bloka na postajo -> ± 535 mm x 530 mm Todpjzxrkvsfx Aiqsc maksimalna debelina blokov 100 mm primerno za hlajenje z amonijakom ali freonom (ni vključeno) dimenzije (D x Š x V): ± 4.710 x 1.600 x 1.120 mm 32 blokov po ± 26 kg ali 64 blokov po ± 13 kg ± 1.664 kg / cikel (2 uri 30 minut)

Stanje: rabljeno, vsak z 26 postajami z ločilno ploščo Todpfxezx Ug Te Aiqjc primeren za 52 blokov: - dimenzije 1 celoten blok na postajo -> 1.070 mm x 530 mm - dimenzije 2 bloka na postajo -> 528 mm x 530 mm maksimalna debelina blokov 100 mm primeren za hlajenje z amonijakom ali freonom (ni vključeno) dimenzije (D x Š x V): ± 4.000 x 1.700 x 1.300 mm 26 blokov, vsak po ± 26 kg ali 52 blokov, vsak po ± 13 kg ± 1.352 kg / cikel (2 uri 30 minut)

Stanje: novo, Leto izdelave: 2025, Filling and capping machine for dispensing liquids and pastes into stand-up pouches (Doypacks) with spout and screw cap. The rotary filling machine is specifically designed for filling all types of liquids such as water, juices, sauces (e.g., soy sauce, salad dressings, tomato sauce), or liquids with higher viscosity such as grill/BBQ sauces, honey, as well as viscous products like peanut butter, fruit jams, hazelnut spread, etc. The machine is equipped with six filling heads for liquid dispensing and six heads each for positioning and sealing the spout caps. The production process is fully automated from pouch feeding, filling, spout cleaning, cap delivery via elevator, capping, to discharge of finished products. Exact fill volume is ensured by constant monitoring of the liquid level. PLC control system, touchscreen operator panel (menu available in various languages, e.g. English, German, etc.). CIP system and UV sterilization lamp included. Suitable for pre-made stand-up pouches with corner or top spouts. Tsdjv Nlnajpfx Aiqjc - Specifications: Spout design: double guide ring; filling range: 50 - 500ml (adjustable); number of filling heads: 6; max. machine output rate idle: 16 cycles/min (up to 100 bags/min); power: 2.5kW, 220/380V, 3-phase; air pressure and compressed air consumption: 6-7 bar, 0.7m³/min; product-contact parts are made of stainless steel 316, non-contact parts are stainless steel 304; machine dimensions without pouch feed conveyor: L2600xW1830xH2050mm; pouch feed conveyor dimensions: L2000xW400xH1500mm; weight: 1700kg. Please note that our new equipment prices are often below the usual used equipment prices. Feel free to ask for a quotation and tell us about your packaging application. – We typically have 30-50 different new machines available from stock at all times. For custom-built machines, we offer very short delivery times starting from about 3 weeks. – All machines come with a full warranty.

Leto izdelave: 2025, stanje: novo, Vertical filling machine for packaging liquids into 3-side sealed or flat pouches. Includes liquid dosing unit (for high-viscosity liquids). Twin filling module for high capacities, can be connected to a CIP system for automatic circulation, ensuring clean supply lines. The packaging material is sterilized with UV light within the machine to provide a hygienic environment for both packaging material and liquid product. This reduces the risk of product contamination during packaging and increases shelf life. – Specifications: max. idle machine cycle rate: 100 cycles/minute; suitable for volumes from 200–1000ml; accuracy: +/- 1.5%; max. film width: 320mm; pouch width: 100–160mm (depending on pouch type); pouch length: 95–165mm; compressed air: 0.7m³ 6bar; 380V, 3.9kW; machine dimensions: 1700x1100x2950mm; weight: 720kg. The machine/system is also available in other versions for different packaging sizes and speeds. Tsdpfev Nmznex Aiqoc Please note that our new prices often undercut common used equipment prices. Feel free to inquire and let us know your packaging requirements. – Typically, 30–50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times from approximately 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Volumetric dosing unit for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: dosing range: 1–100 ml; hopper capacity: 30 L; number of dosing cups: depending on your product and required fill volumes, we will select an appropriate cup version for you (single- or multi-head). Tjdpfx Aiov Nnlboqoc Please note that our new prices are often lower than the usual prices for pre-owned equipment. Feel free to make an enquiry and let us know your packaging requirements. – Typically, 30–50 different new machines are immediately available from stock. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines are supplied with a full warranty.

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20044G, skupna dolžina: 5.000 mm, skupna višina: 2.100 mm, skupna širina: 1.500 mm, vhodna napetost: 220 V, moč: 4 kW (5,44 KM), Na prodaj je rabljena naprava za nalepke (sleeve label machine), vključno s tunelom za skrčevanje in transportnim trakom iz industrijske embalažne linije. Naprava je bila uporabljena za avtomatsko nalepljanje skrčljivih ovitkov (sleeve) na steklenice, pločevinke in druge embalaže, zlasti pa je primerna za uporabo v pijačni, živilski in embalažni industriji. Naprava ima robustno, industrijsko zasnovo z ohišjem iz nerjavečega jekla in jo je mogoče integrirati v obstoječe embalažne in polnilske linije. Stanje: Naprava je rabljena in je bila delno obnovljena. Zadnjič je bila v delujočem stanju. Zaradi rabljenega stanja pa se prodaja brez garancije za popolnost, delovanje nadzorne enote ali primernost za določen namen. Priporočljivo je, da si jo kupci ogledajo in opravijo tehnični pregled pred nakupom. Obseg dobave: Tedpexvbz Ejfx Aiqec Naprava za nalepke (sleeve label machine) Tunel za skrčevanje Transportni trak razpoložljivi dodatni deli in komponente, kot je razvidno pri ogledu Možen tudi posamičen nakup: Po dogovoru je mogoče kupiti tudi posamezne komponente ali sklope naprave. Ogled je možen po predhodnem dogovoru. Dodatne tehnične informacije, slike in dimenzije so na voljo na zahtevo.

Stanje: rabljeno, Used membrane filter press Anlage Type: Passavant Noggerath Application: Sludge dewatering Design: Side bar Filter plate size: 1200x1200 mm Number of plates: 100 pieces / membrane mix Filter plates: PP (polypropylene) Filter cloths: optionally available, tailored to the specific medium Press volume: approx. 2900 dm³ Filtration pressure: approx. 15 bar Pump technology: optional Purchase or rental: Inspection of the equipment possible by arrangement at our site. Todpfxowy H Nrs Aiqoc

Stanje: rabljeno, Tehnične podrobnosti: Vrsta vpenjalnega držala orodja: HSK-A 100 Vrsta držala orodja: Wohlhaupter Vrsta držala orodja: Glava za fino vrtanje / Precizno struženje Tjdpeyug Ebefx Aiqec Na voljo velika izbira Wohlhaupter HSK-A 100 držal za orodja, glav za vrtanje, adapterjev in podaljškov. Seznam kosov s cenami pošljemo na zahtevo.

Stanje: novo, Leto izdelave: 2025, Module for pressing closures onto containers. - Stainless steel version (SS304); maximum machine cycle rate in idle: 120 cycles/minute; cap diameter: 15-100mm; container/bottle diameter: 35-140mm; container/bottle height: 50-300mm; power supply: 220V, 2.7kW; machine dimensions: L2800xW900xH1880mm; weight: 400kg. Tedpfx Aev Nk T Ujiqjc Please note that our new prices are often below typical used equipment prices. Feel free to enquire and let us know your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-manufactured machines, we offer very short lead times starting from approximately 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2026, Širina materiala: 100 mm Debelina materiala: 15 mm Tjdpfxjurni Ue Aiqjc Število usmerjevalnih valjev: 9 Usmerjevalna hitrost: 7 m/min Skupna potrebna moč: 0,75 kW Masa stroja: pribl. 380 kg Potrebni prostor: pribl. 710 x 920 x 1360 mm Oprema: - 5 pogonjenih spodnjih valjev - 4 nastavljivi zgornji valji - maks. presek: pribl. 1000 mm² - možnost mobilne uporabe na kolesih - navodila za uporabo

Stanje: novo, Pressure 100 t Stroke 380 mm Table surface 1740 x 996 mm Pressure 258 bar Approach speed 7.54 mm/sec Working speed 2.47 mm/sec Return speed 9.06 mm/sec Installation height 700 mm Table height 720 mm Total power requirement 2.2 kW Machine weight approx. 1685 kg - Manually movable portal Tsdpfsi Db Erox Aiqec - Manually adjustable cylinder (left – right) - Cylinder extension to table - Integrated pressure gauge - Pressure regulator - Hydraulic unit with two speeds - Joystick for piston movement up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (sideways) and a movable frame (longitudinal) to allow easy access to all points of the surface. The design of this portal press enables heavy workpieces to be placed on the table by crane, and the portal can be pushed over the material at the start of the pressing process. The quality of these hydraulic straightening presses is very high. Furthermore, the hydraulic power unit is fitted with a pressure regulator, two speeds, a joystick, and a hand pump for precision pressing operations.

Stanje: dober (rabljeno), vrsta goriva: dizel, barva: bela, Leto izdelave: 2017, obratovalne ure: 2.560 h, Dvižna kapaciteta: 550 kg CE-označba: da Tehnično stanje: dobro Optično stanje: dobro Dobavni pogoji: EXW Država proizvodnje: NL Za več informacij se obrnite na Vink Machinery. Knikmops 100 * Leto: 2017 * Dizel * 2560 delovnih ur * 2 metra višina dviga Tedpfx Aisx I Rbnoqec * Nosilnost 550 kg * Hidravlična hitra menjava * dodatne funkcije * vključno z nizozemsko registrsko tablico

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Lepo ohranjen rabljeni E Brake znamke Safan Tedjzbhk Ejpfx Aiqjc Tip E Brake 100 3100 Kapaciteta 3100 x 100 ton Osi Y1, Y2, X, R, Z1 in Z2 CNC krmiljene Ročno bombiranje Hidravlično zgornje vpenjanje Wila NS

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 21 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 50 mm, največja debelina roba: 3 mm, hitrost pomika os X: 7 m/min, vrsta aktuacije: električni, skupna višina: 1.500 mm, skupna dolžina: 3.200 mm, skupna širina: 1.100 mm, skupna masa: 650 kg, Oprema: CE označba, dokumentacija / priročnik, – izdelano v Italiji – leto proizvodnje 2018 – predhodno frezanje – tehnična dokumentacija, certifikat CE TEHNIČNE LASTNOSTI: Tedpfx Aiozzzr Isqsc – debelina robnega traku: 0,5 – 3 mm – debelina lesene podlage: 0,5 – 5 mm – višina elementa: 8 – 50 mm – minimalna dolžina obdelave: 160 mm – minimalna širina plošče: 110 mm – hitrost podajanja: 7 m/min – delovna temperatura: 190° – 220° – predhodno frezanje – valj za nanašanje lepila – giljotina za predhodno obrezovanje robnega traku – žage za končno obrezovanje robnega traku spredaj/zadaj – frezanje zgornji/spodnji rob – radialno brušenje – linearno brušenje – poliranje – zračni curek za vsak agregat – delovni tlak: 6 – 8 bar – višina mize od osnove: 900 mm – premer priključka: 2 x 60 mm in 2 x 80 mm – transportne dimenzije (dolžina/širina/višina): 320 / 90 / 150 cm – teža: ~ 650 kg

Stanje: rabljeno, Leto izdelave: 2002, skupna višina: 2.400 mm, skupna dolžina: 2.000 mm, skupna širina: 950 mm, Barva: modra Teža: 1.500 kg - Letnik: 2002 - Dokumentacija je na voljo: Ne - CE-oznaka je prisotna: Da - CE-certifikat je prisoten: Ne - Serijska številka: AY11051 - Smer rezanja: vertikalna - Nazivna moč glavnega motorja [kW]: 15,0 - Premer kolesa [mm]: 915 - Maks. rez do podajalne role [mm]: 230 - Maks. rez do opore [mm]: 260 - Maks. širina reza do stebra [mm]: 300 - Maks. skupna odprtina [mm]: 480 - Maks. višina reza [mm]: 330 - Širina mize [mm]: 1010 - Dolžina mize [mm]: 740 - Maks. širina tračne žage [mm]: 100 - Min. dolžina tračne žage [mm]: 5385 - Maks. dolžina tračne žage [mm]: 5485 - Min. debelina tračne žage [mm]: 0,8 - Maks. debelina tračne žage [mm]: 1 Tjdezudb Eopfx Aiqjc - Vrsta podajalne role: ročna - Premer odvodnega priključka [mm]: 150 - Napetost [V]: 400 - Poraba električnega toka [A]: 28 - Varovalka [A]: 32 - Moč [kW]: 15,0 - Dimenzije za transport: 2000 mm x 950 mm x 2400 mm (d x š x v) - Transportna teža [kg]: 1500 kg - Transportna pakiranja [kos]: 1 Finančne informacije Davek na dodano vrednost: navedena cena je brez davka na dodano vrednost Davek na dodano vrednost/davčni sistem na podlagi razlike: davek na dodano vrednost je odbitljiv za podjetja Dobava in prevzem možni kadar koli za vse izdelke iz industrijskega področja Yorick Diebels

Stanje: rabljeno, Leto izdelave: 1998, Delovna napetost 400/50 V/Hz Moč 13 kW Parker Polyflex SMM100 je specializiran stroj za montažo cevi, ki je bil razvit za natančno montažo visokotlačnih cevi iz termoplasta. Varno tričeljustno vpenjalno pripravo zagotavlja stabilno pritrditev in zanesljiv prenos sile pri stiskanju priključkov. rabljeno, brez garancije Dodatna oprema, prikazana orodja in vpenjalna orodja so del dobave Todpfx Aijzz S Ndsqjc le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in informacijah, kakor tudi do medčasne prodaje!

Stanje: novo, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, 3 × Eaton BECO INTEGRA® PLATE 400 EC – Hermetically Sealed Layer Filter Systems (2017, unused) Brand-new, never operational – only FAT/SAT performed with water. CE-marked, GMP & FDA compliant. Complete FAT and SAT documentation available. Immediately available, sale individually or as a package possible. Model & Design: Hermetically sealed depth filter system (filter press) with external chamber & continuous profile gasket Stainless steel construction (AISI 316L / 1.4404, partly 1.4435), high-gloss polished product-contacting surfaces CIP & SIP-capable, sterile design with BIOCONNECT flange connections (NEUMO) Format: 377 × 400 mm filter sheets (0.12 m² per sheet) Hydraulic closing mechanism with 4-stage control for cleaning, sterilization, filtration & opening Key Technical Data: Max. operating pressure: 6 bar | Max. differential pressure: 4 bar Operating temperature: up to 140°C | Sterilization: up to 134°C Mobile frame construction Incl. turbidity frames & clear elements Differences between the 3 units: Unit 1: 4.80 m² filtration area, 9.60 L solids volume, 40 sheets, product-contact parts partly 1.4435, fittings & riser pipes supplied separately Unit 2: 3.36 m² filtration area (expandable to 4.80 m²), 6.72 L solids volume, 28 sheets, also stainless steel, expandable Unit 3: Technically identical to unit 1, but with additional fittings & riser pipes pre-assembled (GEMÜ diaphragm valves, sight glasses, pressure gauges) Applications: Tsdpfx Aijw Nikvjqsc Pharmaceutical and biotech production Food & beverage industry Processes with high hygiene and sterility requirements Price: Negotiable depending on configuration, sale individually or as a package possible. Total price in 2017: €253,000 Delivery: Ex stock, worldwide delivery possible. Original documentation, FAT & SAT reports, drawings, and 3.1 certificates included.