Stroj Za Valjane Pločevine nakup rabljenega (103.700)

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg Psdpst Hw Iisfx Anpjgu E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: novo, Širina pločevine 3100 mm Debelina pločevine 10 mm Upogib 8 mm Premer zgornjega valja 270 mm Premer spodnjega valja 250 mm Premer stranskega valja 210 mm Skupna potrebna moč 11 kW Teža stroja pribl. 7750 kg Mere stroja 5600x1450x1600 mm Dodatna oprema/izvedba: - Naprava za konično upogibanje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Stroj iz jeklene konstrukcije - Ločena upravljalna konzola - Dve hitrosti - Vsi valji na krogličnih ležajih - Naslonsko in podpornik zgornjega valja upravljata s krmilne konzole. Pri odprtju naslona se valj samodejno dvigne navzgor. - Konična nastavitev valjev preko upravljalne konzole Pedpfeyv Nhcex Anpogu - Osrednji valji s pogonom preko hidravličnega motorja in obhodnega reduktorja (zgornji in spodnji valj) - Kalibracija

Stanje: novo, Leto izdelave: 2025, SHEET METAL BENDING MACHINE MODEL ZGDS-70 WORKING LENGTH: 700 MM Pedohwztpopfx Anpsgu ALL THREE ROLLERS REMOVABLE AND ADJUSTABLE MAXIMUM THICKNESS OF BENDABLE STEEL SHEET: 1.0 MM MACHINE WEIGHT: 70 KG

Stanje: novo, Širina pločevine: 1050 mm Debelina pločevine: 3,3 mm Upogibna zmogljivost: 3,0 mm Premer valjev: 90 mm Najmanjši premer: 130 mm Skupna priključna moč: 1,1 kW Pgsdpoyv Nfbofx Anpsu Teža stroja: ca. 570 kg Prostorske zahteve: ca. 2100 x 800 x 1130 mm Oprema: - Asimetrični 3-valjni okrogli stroj z motornim pogonom - Zgornji valj izklopljiv - Naprava za konično upogibanje - Glavni motor z zavoro Posebna oprema: - Motorno nastavljanje zadnjega valja - Digitalni prikaz nastavitve zadnjega valja - Indukcijsko kaljeni valji

Stanje: novo, Leto izdelave: 2024, SHEET METAL BENDING MACHINE MODEL ZGDS-125 WORKING LENGTH: 1,250 MM ALL THREE ROLLER ROWS REMOVABLE AND ADJUSTABLE Psdpfx Ansiwdi Dopsgu MAXIMUM THICKNESS OF BENDABLE STEEL SHEET: 0.7 MM WEIGHT OF THE MACHINE: 125 KG.

Stanje: rabljeno, Leto izdelave: 1997, Tehnične podrobnosti: Širina pločevine: 3050 mm Debelina pločevine: 16 mm Upogib: 12 Pgodpfoyh D Nnsx Anpsu Razdalja med stojali: 5200 mm Premer zgornjega valja: 330 mm Premer spodnjega valja: 360 mm Skupna moč: 15 kW Teža stroja pribl.: 18,0 t Mere stroja pribl. D x Š x V: 5,3 x 2,4 x 2,0 m Izdelava konusnih odsekov / konusno upogibanje 70 % možnih debelin pločevine za krožno valjanje se lahko obdela kot debelina pločevine pri valjanju konusov Pri valjanju konusov je maksimalna obdelovalna debelina pločevine cca 8 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, delovna širina: 1.525 mm, najv. debelina pločevine: 100 mm, skupna masa: 6.400 kg, La série 42 offre la solution pour les fabricants qui fournissent des produits de qualité supérieure. Cette qualité exceptionnelle est obtenue grâce à un agrégat de brosses multirotatives doté de 8 brosses lamellaires abrasives, qui assurent un ébavurage uniforme et un arrondi parfait des arêtes du métal. Machine à brosses rotatives multidirectionnelles (RB), pour l’ébavurage homogène et la finition des pièces planes en tôle. Un traitement complet en un seul passage, la surface de la pièce étant dotée d’une finition de surface non directionnelle. Équipée d’un ou plusieurs agrégats à bande abrasive (W) pour le pré-ébavurage et la finition fine. Agrégat à brosse coupelle (TB) pour l’ébavurage, la cassure d’arêtes, la finition non directionnelle ou l’élimination de la calamine. - Agrégat à bande abrasive (auto-étalonnant) - Agrégat à brosse coupelle (auto-étalonnant) Pgedpfxexw Ih Uo Anpeu - Agrégat à brosses rotatives avec 8 brosses (auto-étalonnant)

Leto izdelave: 1996, stanje: dober (rabljeno), številka stroja/vozila: 598, Offer 22391 Technical Data: Pgjdpfx Asiqgd Ejnpsu - Cutting length up to: 200 mm - Cutting thickness: - Steel (with 400 N/mm² tensile strength): 6 mm - Stainless steel (with 600 N/mm² tensile strength): 4 mm - Infinitely variable cutting angle adjustment: 30° – 120° - Pneumatic clamping - Automatic blade gap adjustment - Locking stops left & right, each: 300 mm - Table support surface: 1000 x 800 mm - With T-slots and depth stops - Table height approx.: 900 mm - Depth stops - Drive: 400 V / 4 kW - Electric foot switch - Required space approx.: W 1000 x H 1350 x D 1510 mm - Weight approx.: 1800 kg

Stanje: novo, Širina pločevine: 1250 mm Debelina pločevine: 5,5 mm Upogibna zmogljivost: 5,0 mm Dolžina valjev: 1280 mm Najmanjši premer: 210 mm Premer zgornjega valja: 140 mm Teža: 1365 kg Dimenzije (D-Š-V): 2.020 x 900 x 1.200 mm Standardna oprema: - Centralni valji gnani z električnim motorjem, cirkulacijski reduktor in zobniški pogon - Stransko izmetljiv zgornji valj - Glavni motor z zavornim sistemom Pgsdpfx Aneyvvpyepsu - Naprava za konično upogibanje - Mobilna nadzorna plošča in nožni pedal - CE znak/Izjava o skladnosti Posebna oprema: - Motorizirano nastavitev zadnjega valja - Digitalni prikaz za zadnji valj - Indukcijsko kaljeni valji

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 07/2027, vrsta vhodnega toka: trifazni, Stroj za čiščenje pločevine Jeros 5015/828 Za pločevine z 2 robovi Krajša stran dvignjena Izvedba iz nerjavečega jekla Z oljenjem Preverjeno po DGUV V3 samo pri nas Pgedoyaklcopfx Anpsu Priklop: 400V, 16A CEE vtič Rabljeni stroj Vabljeni na obisk!

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Italy Price: €74,000 Leasing rate: €1,398.60 Working width: 1,350 mm Sheet thickness range (mild steel): 0.5 - 170 mm Abrasive belt dimensions: 1,370 x 2,200 mm Extraction capacity: 4,000 m³/h Extraction connection: diameter 200 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Length: 1,750 mm Width: 2,100 mm Height: 2,180 mm Weight: 2,000 kg EQUIPPED WITH 2 WORKING STATIONS: 1 x ABRASIVE BELT AND 1 x TOP BRUSH UNIT Machine made of stress-relieved steel welded construction for stable and rigid structure. Worktable with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working station. Extraction hoods inside the machine, one per station. Touch screen for * Automatic star-delta switching of main motors * Analog ammeter for each station * Digital sheet thickness display with decimal point tolerance * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm messages FEED SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed via frequency inverter, 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant. Automatic conveyor belt centering. Pgjdjynmwkjpfx Anpou Side guides to prevent the belt from lifting. Rubber pressure rollers before and after each station, oil and temperature resistant. Idler rollers at the front and rear of the table. 1st WORKING STATION – R Balanced contact roller, anti-oil and anti-heat nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation of abrasive belt wear. Pneumatic cylinders for automatic engagement in working position and lifting during emergency stop. Abrasive belts and/or Scotch-Brite can be used. Motorized adjustment and electronic control of contact roller height. Variable-speed motor with automatic emergency brake. Pneumatic belt tensioning system. Abrasive belt centering system with electronic photo cell. Oscillation adjustment for width and timing. Contact roller adjustment precision: ±0.02 mm Contact roller adjustment speed: 10 m/min Contact roller diameter: 180 mm Rubber roller hardness: 55 Shore Contact roller stroke (grit adjustment) up/down: 8 mm Abrasive belt speed: 3 – 18 m/s Motor power: 11 kW 2nd WORKING STATION – X 2 rows of vertical brushes, 10 rotating clockwise and 10 counterclockwise Oscillating cross movement of the whole group Quick-change system for brushes Brush diameter: 115 mm Number of brushes: 20 pcs Oscillation stroke: 15 mm Rotational motor power: 5.5 kW Rotational speed: 300 – 1000 rpm Oscillation motor power: 0.37 kW Abrasive brush speed: 10.0 m/s OPTIONS AND ACCESSORIES B Group – External horizontal drum brush Ø 150 mm over Scotch-Brite brush: €5,580.00 over wire brush 0.3 mm: €5,900.00 R Group – ABRASIVE BELT Motor 15 kW: €1,060.00 OPTIONS: Return to Sender system (workpiece is discharged to the front): €1,290.00 Conveyor belt with vacuum system, 300 mm wide, 4.0 kW: €4,780.00 2 additional PVC-coated rollers at infeed and outfeed sides: €2,040.00 Tampico brush system for component cleaning, 0.55 kW, Ø 150 mm: €4,5...

Stanje: rabljeno, Leto izdelave: 2001, Širina pločevine: 1650 mm Pgodpfx Anozafi Nspou Debelina pločevine: 0,5-3 mm Število valjev: 21 Hitrost ravnanja: 0-60 m/min Premer ravnalnih valjev: 50 mm Nastavitev: 30 mm Teža stroja: cca 24,5 t Potrebni prostor: cca 4,5 x 2 x 2,8 m Obratovalna napetost: 400 V Prehodna širina: 1720 mm Število nosilnih valjev: 18 Glavni pogonski motor: 45 kW Vstopna višina: 1250 mm 6 HI visokozmogljiv ravnalni stroj z 21 ravnalnimi valji za fino ravnanje jekla in neželeznih kovin. Stroj ima 23 vmesnih valjev in 18 podpor. Digitalna nastavljivost valjev znaša 0,01 mm. Menjalnik je bil obnovljen leta 2021.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Širina pločevine 1550 mm Debelina pločevine 2,0 mm Upogibanje 1,5 mm Pedpfsxcuxdox Anpsgu Premer zgornjega valja 90 mm Teža stroja pribl. 560 kg Potrebni prostor pribl. 2580 x 700 x 1250 mm Razstavni stroj iz leta 2022 Stanje kot NOVO Oprema: - Ročni asimetrični 3-valjni okrogli upogibni stroj - Ročni pogon - Ročno zložljivo ležajno ohišje - Ročno nastavljanje zadnjega valja - Upogibni valji s profilnimi utori: 4/6/10 mm

Stanje: rabljeno, Leto izdelave: 2002, Sheet width: 3050 mm Sheet thickness: 3.0 mm steel Bending capacity: 3.0 mm steel Top roll diameter: 170 mm Lower roll diameter: 170 mm Side roll diameter: 180 mm Control: conventional Connection: 380 V Total connected load: 3.0 kW Weight: 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - Inspected condition - machine video - ?v=ZW8Us6Hbm3E Psdpfxsxacfgs Anpogu Equipment: - Electro-hydraulic 3-roll plate bending machine - Asymmetrical roll arrangement - Electric motor-driven side roll adjustment, including digital position display - Manual lower roll adjustment via hand crank - Including conical bending device: * Inclined positioning of lower and side rolls * Parallel alignment at any side roll position - Hardened rolls made of SAE 1050 CK 45 - Manual swing bearing for removal of closed tubes; top roll must be lifted prior to opening the bearing (e.g. by forklift/crane) - Safety device - Connection cable and plug - 4-way foot switch: * 2 buttons for side roll adjustment (up/down) * 2 buttons for roll movement (left/right) * With 4 new foot switch covers - Operating manual (ENG) * Special accessories included: - Factory-new top roll with plastic/rubber coating * Suitable for bending non-ferrous metals * e.g. copper, aluminium

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Serija Timesavers 10 Serija 10 ima vrtljivo glavo in stran za hitro menjavo brusnega diska. S to stranjo odstranjujemo drobne izbokline in višje robove. Druga stran ima nosilec za lamelno krtačo, ki se uporablja za zaobljanje robov in zaključno obdelavo. Zaradi različnih možnosti uporabe orodij je serija 10 resnično vsestranska in primerna za odstranjevanje robov, zaobljanje robov, zaključno brušenje in odstranjevanje trdne žlindre. Vrtljiva glava za 180° omogoča izjemno enostavno in hitro menjavo orodja. Stroj je opremljen z vakuumskim poljem, hitrost motorja pa je brezstopenjsko nastavljiva. Stroj je izjemno prilagodljiv, opremljen je s kolesi za enostavno premikanje in je zaradi preproste uporabe uporabniku prijazen, zato je dostopen vsakemu. Pedpoznlyvsfx Anpjgu

Stanje: rabljeno, Pivoting Bending Machine KRAMER Type A-Maut. II 1000 Serial No. 48 287 Year of manufacture: 1990 Working length: 1060 mm Max. sheet thickness: 3.75 mm Stroke of upper beam: 180 mm Adjustability of bending beam: 60 mm Back gauge: 480 mm Drive power, bending beam: 4 kW Drive power, upper beam: 1.5 kW Power supply: 400 Volt, 50 Hz - Manual and semi-automatic control - Angle adjustment via preset angle selector disc - One-piece sharp rail 135° - Back gauge with handwheel adjustment and simple measuring scale - Continuous stop rail - 3-way electric foot switch Required space (L x W x H): 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Pgsdpofnabyofx Anpju Good condition

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 800 mm, najv. debelina pločevine: 120 mm, višina obdelovanca (maks.): 120 mm, širina brušenja: 800 mm, The grinding and deburring machine provides an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent results by rounding the edges and removing burrs, leading to a significantly improved surface quality. Utilizing state-of-the-art technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. User-friendly operation combined with a robust design ensures seamless integration into your production processes. With our grinding and deburring machine, you not only optimize processing times but also increase the precision and durability of your products. Benefit from superior processing quality and boost your efficiency in production. Pedpfx Aeulauvjnpegu

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, ADV 508 RW 300 CN – Stroj za odstranjevanje ostrih robov in zaoblovanje robov ADV 508 RW 300 CN je kompakten avtomatski stroj za odstranjevanje ostrih robov, blago zaoblovanje robov in obdelavo površine pločevinastih delov, ki so bili izrezani z laserjem, plazmo ali prebijanjem. Kombinacija široke brusne enote in vrtljive krtače omogoča hitro odstranjevanje ostrih robov in dosledno obdelavo robov v enem prehodu. Stroj je še posebej primeren za dele z večjimi zunanjimi konturami. Napovedano je, da bo na voljo v skladišču od septembra 2026, na voljo pa bo tudi za demonstracije v naši razstavni dvorani. Glavne značilnosti Odstranjevanje ostrih robov, blago zaoblovanje robov in obdelava površine Široka brusna enota za učinkovito odstranjevanje ostrih robov Vrtljiva krtača za večsmerno obdelavo robov Še posebej učinkovita pri obdelavi zunanjih kontur Primerna za jeklo, nerjavno jeklo in aluminij Servo-nadzorovana nastavitev višine obdelovanca Spremenljiva hitrost podajanja Kompaktna delovna širina 300 mm Nadzor Delta PLC 7-palčni zaslon na dotik Tehnične specifikacije Model: ADV 508 RW 300 CN Delovna širina: 300 mm Debelina materiala: 0,5–80 mm Minimalni obdelovanec: 50 × 50 mm z vakuumsko mizo / 30 × 30 mm z magnetno mizo Hitrost podajanja: 0,5–7 m/min Brusna enota: 1 × širok brusni pas Pgodjzwqvuopfx Anpou Brusni pas: 1.650 × 320 mm Motor brusnega pasu: 5,5 kW Krtačna enota: 1 × vrtljiva krtača Vrtljiva krtača: Ø300 × 300 × 40 mm Motor krtače: 2,2 kW Vakuumna črpalka: 5,5 kW Nastavitev višine: Servo-nadzorovana Nadzor: Delta PLC Upravljalna plošča: 7-palčni zaslon na dotik Napajalna napetost: 3×380 V / 50 Hz Učinkovito odstranjevanje ostrih robov in zaoblovanje robov Široki brusni pas odstrani ostre robove in zagotavlja enakomerno obdelavo površine. Nato vrtljiva krtača obdeluje obdelovanec iz več smeri za blago in dosledno zaoblovanje robov. Ta konfiguracija RW je še posebej primerna za ravne pločevine z večjimi zunanjimi konturami in omejenimi kompleksnimi notranjimi konturami, kar jo naredi učinkovito rešitev za serijsko proizvodnjo. Tipične aplikacije vključujejo konstrukcijo strojev, izdelavo jeklenih konstrukcij, proizvodnjo ohišij in splošno obdelavo pločevin. Servis in razpoložljivost Napovedano je, da bo ADV 508 RW 300 CN na voljo v skladišču septembra 2026 in bo takrat na voljo v kratkem roku. Stroj si lahko ogledate in ga demonstriramo v naši razstavni dvorani po predhodnem dogovoru. Besten Machines zagotavlja namestitev, tehnično podporo, rezervne dele, potrošni material in servis iz naših lokacij na Nizozemskem in v Nemčiji. Za ponudbo ali demonstracijo s svojimi obdelovanci nas kontaktirajte.

Stanje: rabljeno, Leto izdelave: 2022, 2 x 400 mm magnetna letvica, EMZR, Pjdpozd Nwdofx Anpsgu Kompensacija obrabe orodja EE

Stanje: rabljeno, skupna širina: 2.700 mm, skupna višina: 2.900 mm, skupna dolžina: 1.700 mm, Leto izdelave: 2003 Barva: Bela Lastna teža: 3.000 kg - Leto izdelave: 2003 - CE oznaka: Da - Serijska številka: 0312101 - Nadzor: Konvencionalen - Suho/mokro: Suho - Število postaj [kos]: 1 - Vrsta postaje 1: Brusilni trak - Moč [kW]: 32 Pgedpfjzkkd Sex Anpsu - Maksimalna delovna širina [mm]: 550 - Dimenzije za transport: 1700 mm x 2700 mm x 2900 mm (d x š x v) - Transportna teža [kg]: 3000 kg - Število transportnih paketov [kos]: 2 Finančne informacije Davek na dodano vrednost: Navedena cena je brez davka na dodano vrednost. Davek na dodano vrednost/davčna obravnava: Podjetnikom je mogoče odšteti davek na dodano vrednost. Dobava in odkup so možni kadar koli za vse izdelke iz industrijskega sektorja. Lukas van Rossum

Stanje: novo, Sheet width 1600 mm Sheet thickness 15.0 mm (steel) Pre-bending 13.0 mm (steel) Top roll diameter 230 mm Side roll diameter 210 mm Lower roll diameter 190 mm Total power requirement 7.5 kW Machine weight approx. 4225 kg Space required approx. 4000 x 1300 x 1440 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rolls (top & bottom rolls) - With hydraulic cone bending device - Induction-hardened rolls - Including straightening function for welded pipes - Control unit/display with touchscreen function * Digital position indicator for both side rolls - Mobile control console - 2x selectable bending speeds - Hydraulic folding bearing - Safety device (safety rope with switch unit) - Manometer / pressure gauge for the rolls - CE mark + Declaration of conformity - Operating manual Pedoxabkhepfx Anpegu Illustration shows identical model series

Stanje: novo, Sheet width: 3100 mm Sheet thickness: 8.0 mm steel Bending capacity: 6.0 mm steel Top roll diameter: 230 mm Side roll diameter: 210 mm Lower roll diameter: 190 mm Total connected load: 7.5 kW Machine weight approx. 6,020 kg Space requirement approx. 5142 x 1390 x 1300 mm Pjdpexabm Aofx Anpegu Equipment: - Electro-hydraulic 4-roll plate bending machine - 2 driven main rolls (top and bottom roll) - With hydraulic cone bending device - Induction hardened rolls - Integrated straightening function for welded pipes - Control unit / Display with touchscreen function * Digital position indicator for both side rolls - Mobile control panel - 2 selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety rope with switch unit) - Manometer / pressure gauge for the rolls - CE mark & Declaration of Conformity - Operating manual

Stanje: novo, Sheet width: 3100 mm Sheet thickness: 16.0 mm steel Pre-bending: 20.0 mm steel Top roll diameter: 360 mm Side roll diameter: 250 mm Lower roll diameter: 330 mm Total power requirement: 15.0 kW Machine weight approx. 13,200 kg Space requirement approx. 5542 x 2100 x 1983 mm Pgjdpfx Anoxabzaspeu Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rolls (top & lower roll) - With hydraulic cone bending device - Induction-hardened rolls - Including straightening function for welded pipes - Control unit / touchscreen display * Digital position display for both side rolls - Mobile control console - 2x selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety rope with switch unit) - Manometer / pressure display for the rolls - CE marking + declaration of conformity - Operating instructions

Stanje: novo, Sheet width: 2100 mm Sheet thickness: 8.0 mm steel Bending capacity: 6.0 mm steel Top roll diameter: 190 mm Side roll diameter: 150 mm Lower roll diameter: 170 mm Podpfx Anexab E Eopjgu Total power requirement: 3.0 kW Machine weight: approx. 3,290 kg Space requirement: approx. 4042 x 1380 x 1254 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rolls (top & bottom roll) - with hydraulic conical bending device - Induction-hardened rolls - Includes calibration function for welded pipes - Control unit/display with touchscreen functionality * Digital position display for both side rolls - Mobile control panel - 2x selectable bending speeds - Hydraulic drop-end bearing - Safety equipment (safety cord with switch unit) - Manometer / pressure gauge for the rolls - CE marking + Declaration of Conformity - Operating manual

Stanje: novo, Sheet width: 4100 mm Sheet thickness: 8.0 mm steel Pre-bending: 6.0 mm steel Top roll diameter: 300 mm Side roll diameter: 210 mm Bottom roll diameter: 270 mm Total power requirement: 7.5 kW Machine weight approx. 9,930 kg Required space approx. 6532 x 1730 x 1489 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2 driven main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Includes straightening function for welded pipes - Control unit / display with touchscreen function Pedpjxab Tcjfx Anpsgu * Digital position indicator for both side rolls - Mobile control panel - 2 selectable bending speeds - Hydraulic drop-end - Safety device (safety cord with switch unit) - Manometer / pressure gauge for the rolls - CE marking + Declaration of Conformity - Operating manual