Stroj Za Odstranjevanje Kože Rib Za Mehke Filete Ali Porcije Bele Ribe nakup rabljenega (88.608)

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, Bjdpfet Hw Shex Agtolg consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Bljdpfx Aot Hw Iijgtsg Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Na prodaj po naročilu stranke: Segem ERT 100. Stroj je deloval do demontaže. Ležaj rotorja je bil zamenjan septembra 2023 (pribl. 2000 ur). Blsdpfx Agoxhf N Detsg

Stanje: novo, Leto izdelave: 2026, High-performance deburring machine for simultaneous internal and external deburring of profiles and tubes in a single operation (approx. 3 seconds). Powerful industrial three-phase geared motor with frequency control for stepless speed adjustment: 600 - 2,700 rpm. Suitable for deburring tubes and profiles with horizontal/vertical material dimensions up to 120 mm. Easily adjustable work table height (adjustable and lockable) for different material sizes. Adjustable, lockable infeed (carriage) of the deburring brushes to the work table via handwheel with locking function. Drawer for dust residues. Steel sheet housing preconfigured for connection to an external extraction system. Folding housing covers for easy brush changes. Machine body in RAL 7035 Side panel: RAL 7005 1 set of adjustable machine feet with leveling screws. 3 round deburring brushes, 250 x 60 / 0.35 mm wavy steel wire. Connection cable with CEE plug. Including operating tools. 12 months warranty for single-shift operation Working height: 1050 mm Speed: 600 – 2700 rpm Blsdpfenvfl Aex Agteg Weight: 410 kg Machine dimensions: 680 x 1200 x 1380 mm Power: 3 kW Electrical connection (V/Hz): 400/50 Brush diameter: 250 mm Standard brush width: 60 mm DELIVERY: FREE TO SITE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT BASE PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! REQUEST A QUOTE!

Stanje: novo, Leto izdelave: 2025, Available from stock! Deburring and fine grinding machine with 3 working stations: Abrasive belt – Brush station – Abrasive belt Effective maximum working width: 1150mm Standard workpiece thickness: 0.8 – 150mm Digital workpiece thickness display on the control panel, accuracy 0.1mm Blsdpfxepwh Tfo Agtjg Adjustable pressure rollers before and after the working stations Abrasive belt insertion on the left Abrasive belt centering by electronically controlled photo cell, emergency stop in case of tracking error or belt breakage Infinitely variable conveyor feed speed Includes the following options: Preparation of machine base for forklift loading Extraction collector in galvanized sheet metal for machine with 3 working units plus 1 external unit Vacuum device to increase the adhesion of small or slippery workpieces on the feed belt. Includes perforated feed table and belt, as well as a high-performance electric fan and sound-insulated outlet in accordance with CE standard, 5.5kW 2x Grit-Set for electronic fine positioning of the contact rollers Adjustment and display (0.01mm) on the operator panel, stand-by position with pneumatic return of the contact roller in case of emergency stop Frequency controlled drive motors for abrasive belt cutting speed, motor power per unit: 11kW Electronic adjustment of the brush unit HMI Vision – PLC control with visualization of various machine settings via color touch screen Storage capacity of up to 250 grinding programs

Stanje: novo, Idealna dopolnitev za vaš brusilni / odstranjevalni stroj (ustrezen odstranjevalni stroj imamo tudi na zalogi :)!) Mokri ločevalnik znamke Ulmatec Material za odsesavanje: jeklo / nerjaveče jeklo / aluminij, suh prah Elementi, ki pridejo v stik z vodo, so iz nerjavečega jekla. Upravljanje preko zaslona. Motor: 7,5 kW, 400 V, 50 Hz, IE3 Maks. zračna količina: pribl. 11.000 m³/h Maks. podtlak: pribl. 4.000 Pa Sesalni nastavek: Ø 355 mm Izpust: izpustni ventil Polnjenje: Samodejno preko magnetnega ventila Vključuje: Blodpsx Diiaofx Agteg Hepa naknadni filter (predelava nerjavečega jekla) Atex izvedba (npr. pri obdelavi aluminija) Brez cevovodov Razdalja odsesavanja - stroj največ 10m Priklop na lastno omrežje izvede stranka.

Stanje: rabljeno, Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 812 - 5547/V.01.87.110, skupna masa: 19.190 kg, For sale is a well-maintained Nicholson debarking machine A 5 B, suitable for debarking diameters up to 56 cm. We used this machine in our small-diameter log sawmill (max. 25 cm diameter). It was operating flawlessly until its recent decommissioning. The knife cylinders were replaced not long ago and are absolutely airtight. The rotor bearings are in perfect condition. This is a very powerful and fast machine. Nicholson debarkers are known for their straightforward, robust design! - Minimum log length: 200 cm Bedpfx Asw D Hy Sogtolg - Minimum diameter: 7.6 cm - Maximum diameter: 56 cm - Weight: 19,190 kg - Machine dimensions: 470 x 251 x 335 cm (including rotor) - Infeed speed: up to 114 m/min (currently set to 95 m/min)

Leto izdelave: 2025, stanje: novo, This robust professional cable stripping machine, model KM1, processes electrical cables with a diameter from 1 to 70 mm. The blades are hardened to ensure they do not become blunt quickly when stripping armored ground cables. There are 15 different cable feed channels. The cable is cut from both sides, allowing the copper core to fall out easily. It is also suitable for stripping rubber and flat cables. Bedpfx Agep I I U Detelg Technical specifications: Operating voltage: 230 V ~ 50 Hz Power: 3000 watts with dual belt drive system Dimensions: 60 cm long x 75 cm wide x 90 cm high Machine speed: 35 m/min Output: Depending on the cable type, between 400 and 1200 kg/day Weight: 185 kg.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2010, Rabljeni stroj za lupljenje lubja Wiedemann 900 naprodaj. Hitrost pomika 20 m/min, rotor 30 kW. Bledsw I Si Sjpfx Agtog Stroj je trenutno na voljo iz tovarne Untersteinach; ob nakupu bo popolnoma obnovljen in na novo prebarvan v tovarni. Cena na povpraševanje.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Prodaja po naročilu stranke. Leta 2008 popolnoma obnovljeno in dobavljeno z naše strani, uporabljeno do leta 2024. Tovarniško nov rotor AirTen, uporabljen le kratek čas. Vključuje različne rezervne dele in popolno dokumentacijo. Vključuje dovodni in izhodni transporter ter ogrodje. Blsdpjxnz Rksfx Agtsg

Stanje: novo, Wiedemann Odkorjevalne naprave je družinsko podjetje z desetletji izkušenj na področju odkorevanja lesa za stacionarne in mobilne aplikacije. Smo proizvajalec mobilnih odkorevalnih strojev z odprtinami rotorja do 100 cm. Bodpfetzfqbox Agtslg Za več informacij nas kontaktirajte po elektronski pošti ali telefonu.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Schröter dimne, kuhalne in sušilne naprave za 2 vozička, ogrevane na plin. Vsaka naprava za 2 standardna vozička (1x1x2 m). Opremljena s plinskim gorilnikom, hladilnim registrom, generatorjem dima in upravljanjem. Priložene so električne sheme. Na voljo sta 2 popolnoma razstavljeni enoti, suho skladiščeni. Bjdsykl N Rspfx Agtelg

Stanje: rabljeno, Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3283, Häwa — rezkalni stroj za hlodovino tip 249-193-00 Blsdpoxvq Hkefx Agtog Leto izdelave 1979, ser. št. 3283, premer hloda 0,30 – 1,30 m Dolžina hloda 2,20 – 6,50 m Priključna moč 55 kW Postaja za dovajanje hlodovine, voziček za hlodovino, Rezkalno okorjevanje, strgalo z verižnim transporterjem in iznosom Linija za sortiranje hlodovine levo/desno Krmilna konzola in elektro omare

Stanje: kot nova (razstavni stroj), obratovalne ure: 170 h,

Stanje: novo, Timesavers Series 12 WW Bsdpfswqf U Ujx Agtslg The machine is equipped with two abrasive belt stations, allowing you to use Station 1 for preliminary grinding—to remove heavy burrs and splatter—and Station 2 to achieve a surface finish on the part. The conveyor carpet transport speed is infinitely adjustable. The table opening can be adjusted from 0.8 to 100 mm.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, - Capacity: 10 – 17 t/h - Height-adjustable feet: 500 – 1050 mm - Machine used very little Blsdpsq Uk N Sjfx Agtsg - In very good condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 7.464 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0041, dolžina podajanja os X: 400 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 600 mm, teža obdelovanca (maks.): 20 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working Area Cubic travel: 400 x 400 x 400 mm Electromechanical Adjustments Adjustment in Z direction: up to 600 mm manually Travel in X and Y directions: ±200 mm each Rotation around A and B axes: ±45 degrees each Adjustment speed: 1 m/s Load capacity: 20 kg Operation Control system: BOSCH REXROTH Connection Data Connected load: 21 kVA Operating voltage: 400 V Blodpfx Aewrr Tyegtsg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Splošni podatki Teža stroja: 5300 kg Stroj TIMESAVERS 41serie 900 WRD N je bil izdelan leta 2006. Odlikuje ga delovna širina 900 mm in omogoča obdelavo višin brušenja do 60 mm. Miza je nastavljiva od 0 do 80 mm ter podpira različne dimenzije materiala. Idealno za ponovljivo odstranjevanje srha. Za več informacij nas kontaktirajte. Vrste uporabe Bledpfx Aex D S A Nogtsg Ostali stroji za obdelavo pločevine

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, delovna širina: 1.100 mm, skupna masa: 1.300 kg, širina obdelovanca (maks.): 600 mm, priključek za stisnjen zrak: 6 letvica, najv. debelina pločevine: 40 mm, število prejšnjih lastnikov: 1, vrsta nastavitve višine: električni, dolžina mize: 3.000 mm, višina mize: 850 mm, širina mize: 600 mm, trajanje garancije: 3 meseci, Mode of operation: dry Application description: Deburring of steel and stainless steel components Bljdpfx Agew U A Dmetog Year of manufacture: 2007 Standards: CE, EC Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating instructions: 1x manual Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design, each with 6 tools, drive power 1.3 kW per unit; speed frequency-controlled 100–300 rpm, disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (highly wear-resistant design) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed 0.5–5 m/min, frequency-controlled, automatic workpiece thickness adjustment with start-up switch (Joucomatic), 400 mm outfeed table with integrated brush for conveyor belt drive 0.25 kW, DC brake Height adjustment gearbox, vacuum blower, unit locking, belts replaced – machine is fully operational and in very good technical condition. Set according to manufacturer’s specifications/standards. Sale includes a mechanical functional warranty of 3 months from delivery.

Leto izdelave: 2007, stanje: rabljeno, Širina obdelovanca: 900 mm Največja višina obdelovanca: 40 mm Dolžina obdelovanca: 0 mm Skupna potrebna moč: 35 kW Teža stroja pribl.: 3,7 kg Dimenzije D x Š x V: 6,0 x 2,35 x 2,2 m Stroj za odstranjevanje robov pločevine - ESA zaslon na dotik Bjdpfxoyh Rnds Agtelg - vključno s turbo ločevalnikom - vključno s 3 m dovodno mizo - rezervni trakovi - dokumentacija

Stanje: novo, Brushes - Diameter Ø 250 mm Brush width 40.0 mm Speed range 2850 rpm Operating voltage 400 Volt Total power requirement 1.3 / 1.8 kW Machine weight approx. 36.0 kg Space requirement approx. 415 x 467 x 356 mm Features: - Deburring of single parts and small batches - Deburring of straight round, rectangular, and square tubes, as well as flat materials Bedpfxexaamns Agtslg - Heavy-duty, durable industrial design - Maintenance-free motor - Long service life and smooth operation due to balanced rotor - Equipped with high-quality ball bearings - Storage shelf for safety goggles - Incl. 1 multipurpose wire brush, wire diameter 0.35 mm - Operating manual included

Stanje: dober (rabljeno), The debarker is perfectly suited for debarking both hardwood and softwood logs. The carriage is made of a heavy-duty steel frame. Equipped with 5 pairs of drive wheels. Blodpetuyr Ijfx Agtjg The milling arm is also built from a heavy-duty steel construction. Hydraulic milling head. 22 kW motor. The log infeed conveyor shown in the photos is not included in the offer and is available for an additional charge of 25,000 PLN / 5,500 EUR.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 55.784 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 006 904, največja hitrost vretena: 3.000 obr/min, premer zobnika: 200 mm, potovalna razdalja osi X: 950 mm, pomik po osi Z: 200 mm, TEHNIČNI PODATKI Premer obdelovanca: 40 - 200 mm Hitrost vretena obdelovanca: 0 - 3.000 min⁻¹ Navor vretena obdelovanca: 45 Nm Moč: 11,5 kW Srednja višina vretena obdelovanca: 1.140 mm Pomik X: 950 mm Pomik Z: 200 mm Najmanjši dovozi: 0,001 mm Krmiljenje: SINUMERIK 840 D, PLC tip S7 Pnevmatski sistem Potreben omrežni tlak: 5-10 bar Poraba zraka: 0,6 Nm³/h Mazanje Prostornina centralne mazalne posode: 6 l Mazivo: DIN CGLP, ISO VG 68 Hladilna emulzija Poraba hladilne tekočine: 900 l/h Bjdpfxow T Rzwe Agtelg PODROBNOSTI O STROJU Skupna priključna moč: 31,3 kW Teža stroja: 4.000 kg Potrebni prostor: 1,8 x 2,2 x 1,8 m Raven hrupa: maks. 76 dB Barva: RAL 7035 Obratovalne ure: 55.784 h Obratovalna napetost: 400 V, 50 Hz Nazivna moč: 31,3 kW Nazivni tok: 48 A Krmilna napetost: 24 V DC Pomožna napetost: 230 V, 50 Hz

Stanje: rabljeno, Stroj za odstranjevanje robov s ščetko, stroj za odstranjevanje robov s cevi RSA tip STL 1 Letnik: cca 1990 Premer ščetke: 250 mm Širina ščetke: 25 - 60 mm Število obratov: 1430 / 2870 obr/min Moč: 2 / 3 kW Priključek električnega omrežja: 380 V, 50 Hz - Podpora za material Blodpfexpqy Rjx Agtsg - Priključek za odsesavanje Ø 75 mm Mere D x Š x V: 650 x 550 x 440 mm Teža: 100 kg Dobro ohranjeno

Leto izdelave: 2025, stanje: novo, Working width: 950 mm Maximum workpiece thickness: 1.0 – 50 mm Abrasive belt width: 970 mm Abrasive belt length: 1900 mm Machine weight: approx. 1.8 t The SMD 123 RE is a universal entry-level machine designed for deburring, uniform all-round edge rounding, and surface grinding of sheet metal in dry processing. * Suitable for processing steel, stainless steel, and aluminum. * The non-slip conveyor belt ensures safe transport and processing of even small workpieces. * The two rotary heads provide uniform edge rounding on all sides and a non-directional surface finish. * Intuitive touch panel operation enables any operator to quickly become familiar with the machine. * SMD 1 models are quickly installed and ready for operation. * The compact design saves valuable production space. * Low acquisition and operating costs result in short payback periods and guarantee economical processing of your workpieces. Includes: - SMD 123 RE grinding machine (kit) - SMD 123 RE conveyor belt cleaning unit - SMx xx3 – sanding belt +120 Cubitron II, width 970 mm, length 1900 mm - SMD 1x3 set of 3-piece abrasive flap roller P120 - DDE 3002 dry extraction system - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Blsdsvfhm Dopfx Agtsg Additional detailed technical data available on request. The machine is available for immediate delivery from stock in Niederlangen.