Schneider Druckluft Gmbh Unm Sts 660-10-500 nakup rabljenega (91.138)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, nosilnost: 5.000 kg, debelina vilic: 80 mm, širina vilic: 180 mm, Telescopic crane 5,000 kg at a load center of 600 mm Telescopic length at hook: 3,600 mm with 950 kg payload Load capacities for different load centers: see load chart One swivel hook with 5,000 kg load capacity including shackle One swivel hook with 3,000 kg load capacity including shackle Height adjustable by pin locking system Galvanized locking pins, secured with wire Nedpfx Agsiuh I Ajxewf Fork pockets suitable for forks up to 180 x 80 mm Safety chain to prevent the crane from slipping off

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et100, Suitable for use as a fire water tank, fire water reservoir, fire water retention tank, stormwater retention tank, cistern, water tank, etc. Nodectzy Rspfx Agxswf 100,000 liter underground tank for storage of rainwater, service water, fire water, etc. Dimensions: Diameter = 2.90 m – Length = approx. 16.00 m The tank features a manway DN 600 with dome cover, is used, internally emptied and professionally cleaned, and externally coated with a bitumen layer/bitumen insulation. Minor insulation damage from removal and transport may be present on the tank. Price ex location Söhrewald – loaded free of charge – Delivery can be offered at low cost. General information: You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental units are also available! In addition, we purchase existing tank systems and can empty, clean, dismantle, and remove them professionally with certified expertise according to the German Water Resources Act (WHG).

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 100.000 l, Diesel Tank – Heating Oil Tank – Tank System – Steel Tank – Diesel Storage – Storage Vessel Brand New – 100m³ Capacity – Compliant with EN 12285-2 – Class B – (Replacement for DIN 6616), Above-ground, double-walled, including inspection certificate, Suitable for installation in seismic zone 0 areas. The tank is equipped with two saddle feet, a manhole with dome cover, and the following fittings: - 1 fill pipe with TW cap (filling cover) and dip pipe - 1 measuring pipe with level gauge and closure - 1 vent pipe with ventilation hood - 1 brand new overfill prevention device with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detector with type approval and leak detection fluid The tank’s exterior is sandblasted, primed, and painted in RAL7011 iron grey. (Other RAL colours available at surcharge.) Nwsdpei A Hx Iofx Agxef L = approx. 15.80 m – D = 2.90 m – Weight approx. 19.0 t – Ex works, loaded free of charge – (For transport reasons, the dome cover and fittings are supplied loose and must be installed on site!) General: You will receive an invoice with VAT shown. Purchase is subject to our general terms and conditions. Further tank systems (new and used) as well as rental units are also available! In addition, we purchase existing tank systems and, as a certified specialist company in accordance with the Water Resources Act (§62 WHG), can professionally empty, clean, dismantle, and remove them.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et100-neu-löwa, 100,000 Litre Firewater Tank – Underground Storage Tank – Retention Tank According to DIN-EN 12285-1, Tank Class A, suitable for media up to 1.1 kg/dm³, single-walled, interior bare steel, exterior with professional insulation. Tank suitable for installation in walkable areas (not suitable for vehicular traffic). Dimensions: D = 2.90 m – L = approx. 15.80 m Nwedsd Tc Nuepfx Agxof The tank is equipped with a DN 600 manway with dome cover, bolts, and gasket. Tank ex works, loaded free of charge On request, the tank can be fully equipped with a firewater suction connection, meeting the requirements of DIN 14230 – Underground Firewater Tanks: Firewater Suction Connection / Suction Line made of V2A stainless steel, according to DIN 14230, comprising: - 1 piece suction line DN125 made from V2A stainless steel, with Storz A-coupling and Storz A-blank cap - 1 piece vent pipe DN100 with stainless steel V2A hood - 1 piece anti-vortex plate mounted on suction line - 1 piece information sign "Firewater Extraction Point" - 1 piece dip pipe with measurement rod for level monitoring - 1 piece dome cover with bolts and gasket The suction line can be used as both filling and extraction pipe. All components are supplied ready for installation – ex works – If required/desired: Installation of an above-ground firewater suction connection, according to DIN 14244 – Form B, including A-coupling according to DIN 14319 and A-cover cap according to DIN 14319. Housing made of cast iron – exterior with epoxy resin coating Optional: Tank interior can be completely sandblasted and coated for service water/firewater application. The tank is suitable as a water tank, firewater tank, firewater retention tank, rainwater retention tank, retention tank, rainwater storage, retention cistern, cistern, etc. General: You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. We also offer other (new and used) tank installations and rental units! Furthermore, we buy existing tank systems and can, with certified specialist qualifications according to the German Water Resources Act (§ 62 WHG), properly drain, clean, dismantle, and remove them.

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.020 mm, skupna širina: 780 mm, Oprema: Na voljo je tipska ploščica, Year of manufacture: 8/99 Manufacturer: Transtechnik GmbH Condition: Used Model/Type: 110/600 Overall length: approx. 1020 mm Overall width incl. motor: approx. 780 mm Overall width without motor: approx. 680 mm Belt width: approx. 600 mm Belt type: Smooth Colour: Grey/Green Material: Stainless steel/Aluminium Frame height: approx. 130 mm Drive type: Drum motor Internal item number: 2026013002 Nwjdoyg Nhijpfx Agxef Thanks to the outstanding workmanship of our conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We are happy to prepare an individual offer for you or advise you on system design or installation matters. Simply let us know your requirements and the local conditions. Leverage our many years of experience and excellent network of experts. We have already successfully implemented projects for companies from various industries such as logistics, pharmaceutical, craft trades or electronics. Together, we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable manner. We can also supply fully automated sorting systems or complementary components such as order picking racks or containers.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, This UV printer replaces conventional laser printers – enabling even color prints on glass, wood, textiles, plastic, metal, and many other materials. Nwsdpfxjd Hydcs Agxef New model: Freecolor PS10157V Colors: C M Y K LC LM + White Printhead: Epson TX800 Max. resolution: 2690 dpi Includes software for printer and image editing Dimensions: 2.30*1.98*1.34 m Weight: 650 kg 360° application: Bottles/round objects (surcharge applies) A1+ size: 100x150 cm and up to 70 mm print height possible 8 x 500 ml ink can be supplied (surcharge applies) + VARNISH FUNCTION included Software setup and printer instructions available on request – Germany/Europe-wide (surcharge applies) Printing videos etc. can be sent by email or WhatsApp on request.

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), A used compressed air refrigeration dryer. The refrigeration dryer was function-tested by a refrigeration technician before being taken out of service. Afterwards, the technician recovered and disposed of the 18 kg refrigerant R22 (2 bottles). All service protocols are available. A small quantity of nitrogen was then introduced into the system. We can arrange to refill the dryer with new refrigerant (for example, R407C) upon request. !! Sale price does not include refrigerant !! Manufacturer: Sabroe Model: SV 1010 AB Type: 50 A Max. volumetric flow: 55 m³/min (3,340 m³/h) Pressure drop at max. volumetric flow: 0.38 bar Refrigerant weight: 18 kg (currently supplied without refrigerant) Max. pressure refrigerant side: 16/25 bar Air connection: DN 100 Condensate drain: Beko 2x 3/4 inch Max. pressure compressed air side: 16 bar Max. temperature compressed air: 60°C Power consumption with fans: 7.1 kW Voltage: 400V Dimensions (W/D/H): 1880mm / 1100mm / 2000mm Nodpfsfy Trhox Agxjwf Weight: 835 kg

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), tlak (maks.): 10 letvica, Volumetric flow rate: 2,530 l/min Weight: approx. 440 kg Refrigeration dryer MARK MDX 3000, year 2007, 13 bar, capacity 3,000 l/min Oil-water separator ÖWATEC 130 Nwedpfx Aev U Ncxjgxjf Vertical air receiver 750 l, year 2021

Stanje: dober (rabljeno), Leto izdelave: 1999, Approx. 23 pieces of OTTO hazardous goods containers, 600L, large packaging unit "IBC" – used: Njdpfowzyn Dex Agxswf Price per unit ex-location: €395 (net)! Manufacturer: Otto Containersysteme GmbH Type: 11A/X/01/99/D/OTTO/BAM 0356/2556/1090 Serial number: 33782 Year of manufacture: 1999 Capacity: 600L Tank material: St. W 24 Maximum permissible gross weight: 1,090 kg Tare weight: 190 kg With certification as a large packaging "IBC" for national (GGVS/GGVE/GGVS) and international (ADR/RID/IMDG-Code) transport of dangerous goods of packaging groups I, II & III (X-coding) * Dimensions in accordance with DIN 30741 * Container made of steel, hot-dip galvanized * With hinged, lockable lid * Lid locks in place at any opening angle up to approx. 70° with special spring mechanism * Container secured all around with only 2 locks at the front * With forklift pockets, retaining hooks for PE bags, nameplate and pocket Condition: good Available: immediately Location: D-06766 Bitterfeld-Wolfen

Stanje: novo, Leto izdelave: 2025, Pressure blast cabinet DSK 20.10.09 with trolley and rotary table. Nedpofnh Rvofx Agxowf Width: 2050mm Depth: 935mm Height: 955mm Pneumatic lifting door with the advantage that the blasting media falls back into the cabinet when the door is opened, instead of onto the floor. If you have any questions about technical specifications, please contact us in writing or by phone. Our machines have been manufactured at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing known contacts.

Stanje: novo, Leto izdelave: 2025, Tumble belt shot blasting machine with an 11 kW direct-drive impeller wheel featuring 8 throwing blades. Belt width: 1000 mm, diameter: 900 mm. Nwedpfehvikusx Agxof

Stanje: novo, Leto izdelave: 2025, Blast cabinet DSK 1102 S with movable carriage and rotary table. Width: 1500 mm, Depth: 1235 mm, Height: 995 mm Pneumatic lifting door. Nwjdodhl Ngjpfx Agxof If you have any questions regarding technical specifications, please contact us in writing or by phone. The machines are manufactured at our site in Grossenlueder since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the long-standing, well-known points of contact.

Stanje: novo, Leto izdelave: 2025, Turbine rotary table system Nwsdpodtq Anofx Agxsf Diameter: 1500 mm; 2 x 7.5 kW blast wheels If you have any questions regarding technical specifications, please contact us in writing or by phone. The machines are manufactured at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-standing, well-known contact persons.

Stanje: novo, Leto izdelave: 2025, Shot blasting booth components: flat conveyor floor, cross screw conveyor, bucket elevator, air separator, screen, abrasive bunker, blasting machine, filter unit, fan, air ducts, lamella extraction wall, blast feed box, electrical control system supplied as a kit without installation. Alternatively, the system components can also be installed on your premises by our professional technicians. Nodohc T Nlopfx Agxjwf

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 10.000 mm, notranja višina: 5.000 mm, filtrirna površina: 250 m², volumenski pretok: 16 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Nodpfx Aju Ey Dlegxowf Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: rabljeno, pneumatic angle grinder, flex, angle sander, cut-off grinder, cut-off machine, angle grinding machine - for discs: Ø 50 mm Njdpfx Aed R Ikasgxswf - speed: max. 18,000 rpm - case including: accessories - dimensions: 430/360/H90 mm - weight: 2.2 kg

Stanje: novo, Schneider Electric LXM62DU60C21000 servo drive including accessory kit, SN:2710131668, unused in opened original packaging, 100% functional, delivery scope as per photos Nwsdpfx Agopf Ar Ajxjf

Stanje: pripravljen za uporabo (rabljen), Siemens 1FT5066-0AF71-2-Z 3-phase permanent magnet motor with Heidenhain ROD 426.2010-2500, mounting hole spacing: 81 x 81 mm, drive shaft diameter: 19 mm, used condition with normal signs of wear, fully functional Nedpfx Asi D Sgajgxswf

Stanje: pripravljen za uporabo (rabljen), Schneider Electric LXM62DU60C21000 servo drive SN:2710072445. The item was only used for testing purposes and is in like-new condition, 100% functional. Scope of delivery as per photos. Nwsdpfx Aopf Arxogxef

Stanje: dober (rabljeno), PLC control, electronic module, PLC controller Nwedjvn Ncfopfx Agxsf - Manufacturer: Schneider, PLC controller TSX Micro - Model: TSX3710001 - Dimensions: 170 x 135 x H150 mm - Weight: 2.3 kg

Stanje: dober (rabljeno), Circuit breaker, motor protection switch, circuit breaker, isolating circuit breaker, low voltage networks, circuit breakers for transformer, generator, and plant protection -Schneider Electric: Type NSX 100 NA -Rotary drive with extension -Terminal cover: 2 -Dimensions: 290/105/H510 mm -Weight: 2.3 kg Njdpfxeff H Nfe Agxjwf

Stanje: novo, Leto izdelave: 2025, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: Nwedpfx Agjndn Agoxjf • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production. The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending. This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle. The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine. POSSIBLE APPLICATION AREAS: Njdpfx Asng Exasgxswf • Hydraulic piping installation • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototype manufacturing Technical Data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bend radii: 1.5 x Ø (standard 2 x Ø) • Multi-functional machine controller, bending angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bend result • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-based tool monitoring for monitoring clamping pressure • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Test production welcome at our in-house demo room • Consultation and information session on your premises • Leasing/financing support and processing through JUTEC • Trade-in of your existing machine • Service contracts, maintenance on site

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, sestavljeno iz: DX - 100 odvijalec kolutov Enota za telo maske DX 100/200 MN – maska DX - 100 enota za varjenje gumic Transportni trak za končane maske Nedow Iltdepfx Agxewf Kontrola izdelka na osnovi kamere Ohišje (kabina) ni del linije za izdelavo mask

Stanje: rabljeno, moč: 7 kW (9,52 KM), Leto izdelave: 2023, With the RS1500 recycling screen, we offer you a compact trommel screen that requires minimal space while being able to separate large amounts of material. The major advantage is that this trommel screen can be transported on public roads as a TÜV-approved trailer for passenger cars at speeds of up to 80 km/h, providing you with maximum flexibility regarding deployment locations when you purchase this trommel screen. This makes it particularly advantageous for use in civil engineering, utility construction, and landscaping projects. The compact trommel screen weighs just 2.4 tonnes. For challenging soil conditions, we recommend the KS220 and KS275 compact screens! With a total weight of 3.5 tonnes, it can also be conveniently transported to your construction sites, just like the smaller trommel screen. The hydraulic tipping grid allows larger stones or clay lumps to be pre-sorted at the very beginning of the process. Depending on the mesh size, you can even screen out fine chippings. This makes it a valuable asset for processing topsoil and recycling concrete, enabling you to significantly reduce disposal costs when you purchase a trommel screen! Nodsrrvx Tjpfx Agxowf REMAV GmbH is a technological leader in the manufacturing of recycling and screening plants. At our Viernheim location, we specialize in the production of equipment for processing valuable materials in the fields of sand, gravel, and recycling materials.