Rolka Za Razvijalnje Pločevine nakup rabljenega (98.171)

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Hnedpfxoypbp Rs Ah Hst Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Stanje: novo, Sheet thickness: 1.8 mm Bending length: 1050 mm Top roll diameter: 70 mm Sheet length: 1050 mm Details: - Cast iron frame - Motorized bending - Conical bending device - Manual adjustment of the rear and lower roll via handwheel - Mobile control panel - Compliance with CE standards Options: - Rear roll with motor: €825 Hodpfx Aed Ab T Soh Hjnt - Digital display for rear roll position: €1,010 - Frame cover: €274 - Hardened rolls: €392

Stanje: novo, Sheet thickness: 2.5 mm Bending length: 1550 mm Top roll diameter: 90 mm Technical data: - Cast iron frame - Manual or motorized (optional) bending - After bending, the top roll can be swung out to easily remove the material - Cone bending device - Movement of rear roll and lower roll manually adjustable up and down with handwheel - Portable control panel - In compliance with CE standards Hnsdpfsd Ab Txjx Ah Hst Options: - Motorized rear roll EURO 825,-- - Digital display for rear roll position EURO 1,010,-- - Body cover EURO 362,-- - Hardened rolls EURO 650,-- We have numerous references!

Stanje: novo, Širina pločevine 3100 mm Debelina pločevine 16 mm Upogib 13 mm Premer zgornjega valja 330 mm Premer spodnjega valja 300 mm Premer stranskega valja 240 mm Skupna priključna moč 11 kW Hnsdpfx Aeyv I Smsh Het Dimenzije stroja 5600x1650x1900 mm Teža stroja pribl. 10.600 kg Dodatki/oprema: - Naprava za konusno upogibanje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Stroj iz jeklene konstrukcije - Ločena komandna plošča - Dve hitrosti - Vsi valji na krogličnih ležajih - Nosilno in preklopno ležišče zgornjega valja se upravlja s komandne plošče. Ko se preklopno ležišče odpre, se valj samodejno dvigne. - Konusna nastavitev valjev preko komandne plošče - Centralni valji so poganjani s hidravličnim motorjem in reduktorjem. (zgornji in spodnji valj) - Kalibracija

Stanje: novo, Širina pločevine 3100 mm Debelina pločevine 13 mm Hnodsyv Nh Nspfx Ah Hst Upogib 10 mm Premer zgornjega valja 300 mm Premer spodnjega valja 270 mm Premer stranskega valja 210 mm Skupna potrebna moč 11 kW Dimenzije stroja 5600 x 1800 x 1500 mm Teža stroja cca. 8.800 kg Dodatna oprema: - Naprava za konično upogibanje - Indukcijsko kaljeni valji - Digitalni prikaz za stranske valje - Konstrukcija stroja iz jekla - Ločena nadzorna konzola - Dve hitrosti - Vsi valji na krogličnih ležajih - Nosilna in preklopna ležaja zgornjega valja se upravljata iz kontrolne enote. Ko se preklopno ležišče odpre, se valj samodejno dvigne. - Konična nastavitev valjev preko nadzorne enote - Osrednji valji so poganjani s hidravličnim motorjem in planetnim reduktorjem (zgornji in spodnji valj) - Kalibracija

Stanje: rabljeno, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Seaming machine for pre-bending sheet metal seams Hnjdpedzqblofx Ah Het For producing a folded edge Edge folding machine for thin sheet metal as an alternative to press brakes Serial No. 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via knurled threaded screws Space requirement (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. Folding creates a rounded edge, which reduces the risk of injury from sharp sheet edges. Ideal for processing sheet metal for furniture manufacturing, cladding panels, or for HVAC and silencer production.

Stanje: novo, Bending length: 2050 mm Sheet thickness: 1.8 mm Top roller diameter: 95 mm Sheet length: 2050 mm Technical data: - Cast iron body - Manual or motorized (optional) bending - After bending, the top roller can be swung out to the side for easy material removal - Cone bending device - Rear and lower roller movement up and down manually by handwheel - Portable control panel - In compliance with CE standards Options: Hjded Ab Tuspfx Ah Hsnt - Motorized rear roller - Digital display for rear roller position - Body covering EURO 432,-- - Hardened rolls EURO 940,-- - Variable rotation speed We have numerous references!

Stanje: rabljeno, Leto izdelave: 1997, Tehnične podrobnosti: Širina pločevine: 3050 mm Hodpoyh D Nnefx Ah Hjnt Debelina pločevine: 16 mm Upogib: 12 Razdalja med stojali: 5200 mm Premer zgornjega valja: 330 mm Premer spodnjega valja: 360 mm Skupna moč: 15 kW Teža stroja pribl.: 18,0 t Mere stroja pribl. D x Š x V: 5,3 x 2,4 x 2,0 m Izdelava konusnih odsekov / konusno upogibanje 70 % možnih debelin pločevine za krožno valjanje se lahko obdela kot debelina pločevine pri valjanju konusov Pri valjanju konusov je maksimalna obdelovalna debelina pločevine cca 8 mm

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 30 h, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: električni, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: Raycus, model laserskega vira: Raycus, laserske ure: 30 h, laserska moč: 6.000 W, najv. debelina pločevine: 15 mm, najv. debelina jeklene pločevine: 15 mm, Premer cevi (maks.): 220 mm, Dolžina cevi (maks.): 6.000 mm, dolžina mize: 3.000 mm, širina mize: 1.500 mm, potovalna razdalja osi X: 3.015 mm, pomik osi Y: 1.515 mm, pomik po osi Z: 50 mm, vrsta hlajenja: voda, Oprema: CE označba, centralizirani mazalni sistem, hladilna enota, 🇳🇱 Prodajni tekst za vaš stroj BEKE 6 kW za lasersko rezanje z vlakni (3000 × 1500, Reci-glava) Iščete zmogljiv, natančen in cenovno ugoden stroj za lasersko rezanje za obdelavo kovin? Ta stroj BEKE 6 kW za lasersko rezanje z vlakni, opremljen z Reci-lasersko glavo in učinkovito delovno površino 3000 × 1500 mm, ponuja odlično zmogljivost za rezanje tako tankih kot debelih kovinskih plošč. Prava moč 6000 vatov za rezanje jekla, nerjavnega jekla, aluminija, bakra in medenine. Reci-laserska glava za stabilno delovanje, visoko kakovost rezanja in nizke stroške vzdrževanja. Kompaktna delovna površina 3000 × 1500 mm, idealna za standardne plošče in učinkovito proizvodnjo. Čiste robove reza brez potrebe po dodatni obdelavi. Visoka hitrost proizvodnje, idealna za serijsko proizvodnjo in industrijske aplikacije. Zanesljivi deli: Reci-glava, Fuji servo motorji, HIWIN vodila. Uporabniku prijazno CNC upravljanje z visoko natančnostjo. Nizka poraba energije v primerjavi s CO₂ laserji. Hnjdpszyv Syjfx Ah Hot ⚙️ Tehnične specifikacije Delovna površina: 3000 × 1500 mm Moč: 6000 W laserski vlakni Natančnost pozicioniranja: ±0,03 mm Natančnost ponavljanja: ±0,02 mm Hitrost rezanja: do 40 m/min Debelina reza: do 20 mm, odvisno od materiala Hladilni sistem: industrijski sistem za hlajenje z vodo

Stanje: novo, Sheet thickness: 13 mm Bending length: 2100 mm Top roll diameter: 230 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically driven cover for easy removal of material - Digital display for lower and side roll positions - Hydraulic approach - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically driven - Mobile control panel - In accordance with CE standards Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 - Central support EUR 8,250 - Side supports EUR 5,560 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) Hnedpsd Ab Scjfx Ah Hst We have many references!

Stanje: novo, Sheet thickness: 6 mm Bending length: 3100 mm Top roll diameter: 210 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically operated upper cover for easy material removal - Digital display for lower and side roll positions - Hydraulic alignment Hsdpfxod Ab Sdj Ah Hont - Top and bottom rolls are driven by hydraulic system and gearbox - The vertical movements of the lower roll are hydraulically driven - Mobile control panel - Compliant with CE standards Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 7,070 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Stanje: novo, Bending length: 1250 mm Sheet thickness: 4.5 mm Top roll diameter: 120 mm Technical data: - Rear roll driven by motor - Conical bending device - Hardened and polished rolls - Entire frame constructed from St 52 steel - Main motor with brake system - Top and bottom rolls are driven by electric motor, gearbox, and transmission system Hnjdpfxjd Ab Nzs Ah Het - Portable control panel - Cast iron frame - Manual adjustment of rear and lower rolls - In compliance with CE standards Options: - Top roll driven by electric motor: EUR 1,166 -- - Digital display for rear roll position: EUR 1,010 -- - Hardened rolls: EUR 823 -- - Special voltage: EUR 480 -- - Sheet feeder table - Bottom roll driven by electric motor We have many references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 13 mm Top roll diameter: 300 mm Technical specifications: - Hardened and polished rolls Hnsdpfx Aed Ab S Toh Het - Full body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls are mounted with bearings - Upper roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements are hydraulically powered Options: - Variable rotation speed: EUR 4,682 - Sheet feeding table: on request - Oil cooler: EUR 1,040 - Center support: EUR 13,600 - Side supports: EUR 9,400 We have numerous references available!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, delovna širina: 950 mm, najv. debelina pločevine: 120 mm, delovna višina: 120 mm, vrsta upravljanja: CNC krmiljenje, Oprema: CE označba, TEHNIČNI PODATKI Hnodoy Hhp Tjpfx Ah Hot Postaja 1: Brusni trak Postaja 2: Rotacijska krtača Postaja 3: Rotacijska krtača Minimalna debelina pločevine: 0,5 mm Maksimalna debelina pločevine: 120 mm Delovna širina: 950 mm Delovna višina: 0,5-120 mm PODROBNOSTI O STROJU Moč: 39 kW Upravljanje: CNC Število postaj: 3 Dimenzije & teža Dimenzije (D x Š x V): 3.940 x 1.980 x 2.010 mm Neto teža: 7.000 kg Transportni paketi: 4 OPREMA CE oznaka

Stanje: novo, Sheet length: 2100 mm Top roller diameter: 140 mm Sheet thickness: 4 mm Lower roller diameter: 140 mm Length: 4000 mm Height: 1040 mm Width: 1140 mm Approx. weight: 2240 kg Technical specifications: - Hardened and polished rollers - Full body made of ST-52 steel - The 4 rolls are arranged symmetrically Hnodswhtdfspfx Ah Hst - Hydraulically operated top cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers driven by hydraulics and gearbox - Vertical movements of the bottom roller are hydraulically powered - Movable control panel - In compliance with CE standards Options: Central support – €6,479 Side supports – €4,055 CNC – €8,670 Material infeed table – €3,258 Speed control (variable) – €4,109 Automatic material discharge PLC control CNC control Automatic material feed system Interchangeable top roller Adjustable lower roller support system (customisable to customer requirements) We have many references!

Leto izdelave: 1994, stanje: dober (rabljeno), Pribor za obdelavo pločevine Multi V spodnje orodje 75 x 75 x 3100 mm Skupna dolžina: 3100 mm Skupna širina: 75 mm Dolžina: 3100 mm Hedjzc Iztopfx Ah Hent Širina: 75 mm Višina: 75 mm Prosimo, upoštevajte: Informacije na tej strani smo po najboljših močeh zagotovili mi, in če je bilo mogoče, pridobili od proizvajalca. Informacije so podane v dobri veri, vendar natančnost ni zagotovljena. Skladno s tem ne predstavljajo ponudbe ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: novo, Sheet thickness: 3.3 mm Bending length: 1050 mm Top roll diameter: 90 mm Technical specifications: Hsdpfjd Ab T Djx Ah Hsnt - Cast iron body - Manual or motorized (optional) bending - After bending, the top roll can be swung out to the side for easy removal of the workpiece - Cone bending device - Rear roll and lower roll are raised and lowered manually via handwheel - Portable control panel - In compliance with CE standards Options: - Motorized rear roll EURO 825 - Digital display for rear roll position EURO 1,010 - Body cover EURO 274 - Hardened rolls EURO 480 We have many references!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1982, Premer vrtalne vretena: 130 mm, vpenjalo orodja: SK50, centriranje: 500 mm, hodi X/Y/Z: 250 mm/160 mm/380 mm, hodi W/U: 1000 mm/320 mm, pomik: 2 m/min, hitri pomik: 5 m/min, največji premer vrtanja/čeljenja: 800 mm/1400 mm, navor vrtalne vretena/čelilnega podporca: 3100 Nm/6150 Nm, dimenzije vpenjalne plošče X/Y/Z: 3500 mm/1750 mm/350 mm, teža: ca. 30000 kg, krmiljenje: Bosch. Vključno z kotno glavo, podaljškom, stožčastim držalom za orodje za SK50 (brez orodij), 4 x plošče dimenzij 1080 mm/2000 mm in izvrtalno napravo. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Hnjdpfsyttw Uex Ah Hjt

Stanje: novo, Sheet thickness: 10 mm Bending length: 2100 mm Top roll diameter: 210 mm Technical specifications: - Hardened and polished rolls - Full body made of ST-52 steel - The 4 rolls are arranged symmetrically Hnedpfx Aed Ab Sgeh Het - Hydraulically operated top cover for easy material removal - Digital display for bottom and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the bottom roll is hydraulically powered - Mobile control console - Complies with CE standards Options: - Variable rotation speed EUR 3,681 - Material feeding table EUR 2,400 - Oil cooler EUR 1,040 - Central support EUR 6,250 - Side supports EUR 3,600 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable bottom roll support system (for special customer requirements)

Stanje: novo, Bending length: 2600 mm Sheet thickness: 16 mm Top roll diameter: 300 mm Technical specifications: - Hardened and polished rolls - Full body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Top roll cover hydraulically openable and closable from the control panel - All rolls driven by hydraulic motor and planetary gear - Lateral movements driven hydraulically Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 8,250 Hjdsd Ab S Ujpfx Ah Hsnt We have numerous references!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2020, obratovalne ure: 3.064 h, DG Tech – Pooblaščeni center za revizije BLM Group DG Tech izhaja iz spin-offa podjetja DGService z namenom ciljnega odziva na trg rabljenih strojev BLM Group. Zahvaljujoč bogatim izkušnjam na področju poprodajnih storitev in stalnemu tehničnemu izobraževanju nudimo popolno in zanesljivo storitev. Skrbimo za ocenjevanje, odkup in obnovo strojev, vključno z vzdrževanjem laserskega vira, ter zagotavljamo visoke standarde kakovosti. Neposredno vodimo logistiko, razstavljanje in prevoz ter tako odpravljamo tveganja pri prodaji med zasebniki. V sodelovanju z BLM Group nudimo namensko programsko opremo, tehnično usposabljanje in podporo po prodaji. Poleg tega ponujamo prilagodljive operativne leasing rešitve za optimizacijo vaše naložbe in produktivnosti. Laser rezalni stroj LC5, kombinirano za cevi in pločevine Obdelovani materiali: navadno jeklo, nerjavno jeklo, aluminijeve zlitine, baker, medenina. Avtomatska prečna menjava palet za pločevino – format pločevine 3000×1500 Dodatki: – Active Weld: optična naprava za iskanje zvara na ceveh okrogle, kvadratne, pravokotne, ovalne in ploščate oblike Hnsdpfoy Ddqnox Ah Hst – Dodatni nakladalnik za občutljive cevi – Motorizirana sprednja zbiralna miza za cevi – max dolžina 4500 mm – 2D rezalna glava z: Active Focus – Avtomatska nastavitev ostrenja – Active Beem – Samodejna sprememba premera laserskega snopa – Senzorji za samodejni nadzor temperature zaščitnega stekla – Fiber Booster – Enota za avtomatsko menjavo šob s 18 pozicijami – Programska oprema Fly Cut

Stanje: novo, Bending length: 2,600 mm Sheet thickness: 6 mm Upper roll diameter: 190 mm Sheet length: 2,600 mm Technical data: - Rear roll motorized - Conical bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Upper and lower rolls driven by brake electromotors and planetary gears in the gearbox - Portable control panel - In compliance with CE standards Options: - Lower roll driven by electric motor EURO 1,925 Hsdpfed Ab Nkjx Ah Hent - Digital display for rear roll position EURO 1,010 - Extended rolls EURO 966 - Profile rolls EURO 1,190 We have numerous references!

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 07/2027, vrsta vhodnega toka: trifazni, Stroj za čiščenje pločevine Jeros 5015/828 Za pločevine z 2 robovi Krajša stran dvignjena Izvedba iz nerjavečega jekla Hnodpfxeyaklco Ah Hjt Z oljenjem Preverjeno po DGUV V3 samo pri nas Priklop: 400V, 16A CEE vtič Rabljeni stroj Vabljeni na obisk!

Stanje: novo, Bending length: 1600 mm Sheet thickness: 6 mm Top roller diameter: 140 mm Technical data: - Rear roller powered by motor - Cone bending device Hnsdpfx Ajd Ab Nteh Hot - Hardened and polished rollers - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rollers driven by brake electric motors and planetary gearboxes - Portable control panel - In compliance with CE standards Options: - Bottom roller powered by electric motor EURO 1,512,-- - Digital display for rear roller position EURO 1,010,-- - Extended rollers EURO 966,-- - Profile rollers EURO 1,190,-- We have a large number of references!

Stanje: dober (rabljeno), Leto izdelave: 1985, številka stroja/vozila: 2.309.044, Offer 23195 Precision Deburring and Chamfer Milling Machine / Edge Milling Machine Technical specifications: - Suitable for processing steel, stainless steel, aluminium, and plastics - Deburring and chamfering process performed with milling cutter - Chamfer angle: 45° - Chamfer width: steplessly adjustable Hsdpfx Ahsnvdtcs Hjnt - Guide rail length: 500 mm - Working height: 750 mm - Spindle speed: 2750 rpm - Drive: 400 V / 0.7 kW - Required floor space: approx. W 500 x D 400 x H 850 mm - Weight: approx. 30 kg