Mbo Für K/T 76 nakup rabljenega (87.799)

Stanje: rabljeno, prevoženi kilometri: 178.654 km, moč: 75 kW (101,97 KM), prva registracija: 07/2018, vrsta goriva: dizel, največja dovoljena obremenitev: 1.095 kg, skupna masa: 3.200 kg, velikost pnevmatike: 16 zoll, gorivo: dizel, barva: rjava, vrsta prenosa: mehanski, emisijski razred: Euro 6, dolžina tovornega prostora: 1.500 mm, širina tovornega prostora: 1.650 mm, višina nakladalnega prostora: 1.400 mm, obratovalna teža: 2.200 kg, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), klimatska naprava, meglenke, nadzor oprijema, navigacijski sistem, parkirni grelec, računalnik na krovu, sistem za imobilizacijo, tempomat, The vehicle is in excellent technical and visual condition. Fodpfx Aeh Uvnpepljgb All vehicles for sale undergo inspection and servicing in our master car workshop. Non-smoking vehicle. Ideal for camper conversion. Equipment: Single owner, ABS, ASR, ESP, driver airbag, passenger airbag, third brake light, electrically adjustable exterior mirrors, electric windows, ISOFIX child seat attachment, headlamp leveling, fog lights, cornering lights, remote central locking and immobilizer, electric interior locking, 2-zone air conditioning, programmable auxiliary heater, second heater, hands-free system, on-board computer (MFA), height-adjustable driver's seat, cup holder, power steering, adjustable steering wheel, cruise control, second battery, rear Parktronic, navigation system, DAB radio, Bluetooth media, sliding doors on both right and left sides, rear swing doors with windows, heated rear window with wiper, summer tires, tie-down points in load compartment, rubber loading floor, lashing rings for cargo, tinted windows, privacy glazing from B-pillar, sliding windows left and right, 16-inch tires, roof fan with supply and exhaust air, DPF EURO6. Total weight: 3,200 kg Payload: 1,095 kg Towing capacity: 2,200 kg Load compartment internal length: 1.50 m Width: 1.65 m Height: 1.40 m We are happy to accommodate your wishes and can perform various retrofitting tasks in our workshop: Tow bar from €800, reverse camera from €600 1-year Auto Helle warranty according to warranty certificate. Last 5W30 oil service at VW at 158,414 km in September 2021 Interim inspection at 178,654 km New air conditioning service Current vehicle inspection Complete service book or digital service record Timing belt kit and water pump, auxiliary belt and tensioner, air and pollen filter replaced at 178,654 km Repair, servicing, and reconditioning costs are included in the purchase price. Financing/Bank loan possible. Specifications subject to change and errors excepted.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, širina dovoda: 790 mm, MBO žepni zgibalni stroj s 4 žepi v 1. enoti, 4 žepi v 2. enoti ter 2 žepi v 3. enoti, komplet z izlagalnim strojem MBO SAP 46 L. Na voljo tudi kot paket skupaj z zgibalnim strojem MBO K 74-6 KL s 6 žepi in 2 mečema ter z izlagalnim strojem MBO SAP 46 L. Paketna cena: 1.950 EUR naloženo na tovornjak (FCA). Obe stroji popolnoma delujoči in v obratovanju, na voljo video! Fgjdpfx Apoxdq I Delob

Stanje: rabljeno, Leto izdelave: 2014, Pregled Ta paletni etiketirni stroj je bil izdelan leta 2014 pri LOGOPAK (ni navedeno). Stroj je zasnovan za nanos samolepilnih etiket na palete. V uporabi je bil do septembra 2025 v celotni RGB liniji (330 ml) in je trenutno izven uporabe, vendar še vedno nameščen in odklopljen iz električnega omrežja. Stroj je takoj na voljo in ga je možno na zahtevo pregledati. Tehnični podatki Zmogljivost: 60 palet/uro Uporaba: samolepilno etiketiranje palet Redno vzdrževanje je potekalo dvakrat letno; zadnje vzdrževanje januarja 2025. Fgedpfsykz Txjx Apleb

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, širina dovoda: 740 mm, MBO K 74/4 KL folding machine with flat pile feeder. Fgjdotvfqwjpfx Apljb Paper size: min. 15x25 cm to max. 74x112 cm Speed: 30–150 m/min Equipped with delivery belt and compressor. Fully functional, test runs possible. Folding rollers replaced in 2017.

Stanje: rabljeno, Leto izdelave: 2018, Suitable for (model): U 400 We are offering for sale: 2 wheels, 10-bolt, for Mercedes Benz Unimog U 400. Tire size 385/65R22.5, retreaded (cold retreading), 160 K, with siped tread pattern. Fsdpoyq Ar Nofx Aplegb Tread depth approx. 80-90%. If you have any further questions, please feel free to contact us. Location: 94491 Hengersberg

Stanje: rabljeno, prevoženi kilometri: 10 km, prva registracija: 12/2024, barva: oranžna, Your specialist dealer with expertise, service, and consultation offers you: Sink Box Cleaner SCHMAILZL for Multicar, other vehicle manufacturers, and trailers (offer is for the superstructure device without vehicle) Net price: €14,550 plus 19% VAT. (New device with 12-month manufacturer's warranty) Base unit Type SKR II - In RAL 2011 orange, consisting of: Fgedpfx Apevvp Rxeleb - Adjustable frame (1.2 – 2.0 m wide) with lifting and tipping device - Swivel mechanism with cylinder and chain suspension for manhole covers - Lifting winch (lifting capacity approx. 150 kg) - Hydraulic vibrator – cover lifter - Windscreen – lashing equipment - Own weight approx. 300 kg Very simple operation and a back-friendly workflow make this cost-effective device a real alternative to conventional methods when used with a tipper vehicle. Additional benefits: - Low fuel consumption, as operation is nearly at idle speed - Mounting and dismounting is done in just a few minutes, which is important for changing locations - Emptying 150–300 sink boxes per day possible - Emptying without water addition, because of hydraulic vibrator - The device can be mounted to various vehicles thanks to a telescopic frame The following vehicle requirements must be met: - Hydraulic connection 20–30 L/min, 150 bar - Unpressurized return line size 15 - Lashing points on the tipper bed Optional accessories for vehicles or trailers without their own hydraulic drive: Petrol-hydraulic power pack consisting of: Petrol engine 9 hp / 6.7 kW, 20 l/min at 2,400 rpm, 8.4 cm³/rev gear pump, pressure gauge, 40-liter tank with oil level indicator and damping base Dimensions: approx. H 80 x W 65 x D 55 cm, weight: approx. 70 kg Net price: €4,350 plus 19% VAT. Assembly, shipping, or delivery possible on request On request, we will be happy to provide you with complete offers including vehicles, also in right-hand drive versions. We can also offer solutions for retrofitting your vehicle with a demountable tipper body, including DEKRA main report for recertification. Errors, changes, and prior sale reserved. Our general terms and conditions apply. Benefit from our many years of experience in sales and service, and let us prepare your individual offer. Take advantage of our leasing and financing options as well. We promise you expert advice and support from our qualified staff. Further offers from commercial vehicle manufacturers MULTICAR, ISUZU, and PIAGGIO as well as a wide range of attachments can be found at Tel.:

Stanje: novo, Leto izdelave: 2026, The satisfaction of our customers is our highest priority. We are distinguished by our high-quality and reliable workmanship, which is our standard. Folding machine 3.5m/0.8 Technical Data: - Maximum working width: 3640 mm - Bending capacity: 0.8 mm (steel sheet) - Bending angle: 145 degrees - Bending beam: 20 mm - Cutting with the rotary shear possible across the entire working width - Upper beam can be raised in three positions - Opening: 80 mm - Front and depth stops - Angle stop Fgedpfxscka N Uo Apleb - Gas pressure springs - Degree scale - Weight: approx. 650 kg - The NK 0.8 rotary shear has a maximum cutting performance of 0.8 mm (steel sheet) – additional cost: €350 Delivery: within 5 days Payment method: cash on delivery Delivery cost: €400.00 The machine and accessories comply with CE regulations and come with a 12-month warranty. We look forward to your enquiry!

Stanje: novo, SAPI Praškasto Barvanje Popolna prevleka za dolgo zaščito. Praškasto barvanje je zelo učinkovita in široko uporabljena metoda za nanašanje zaščitne in dekorativne površine na različne vrste substratov. Gre za suhi postopek, pri katerem se fina prah, sestavljena iz smol, pigmentov in dodatkov, nanese na substrat. Prah je elektrostatično napolnjen, zato se enakomerno oprime površine in ustvari enakomerno prevleko. Za dosego optimalne oprijemljivosti in trajnosti se substrat najprej temeljito očisti in pripravi. Olja, umazanija in druge nečistoče se odstranijo, da se zagotovi čista površina. To je ključnega pomena, da se prah učinkovito poveže s substratom in ustvari trdno in dolgo obstojno prevleko. Komponente Praškastega Barvnega Sistema Tipičen sistem praškastega barvanja je sestavljen iz več komponent in naprav, potrebnih za nanašanje in strjevanje praškaste prevleke. Kabina za Pršenje in Območje Pršenja Kabina zagotavlja čisto okolje za postopek nanašanja in zagotavlja enakomerno porazdelitev praška. 🎨 Pištola za Praškasto Barvanje Pištola za praškasto barvanje se uporablja za nanašanje praškaste prevleke na delovni kos. 💨 Sistem za Napajanje s Praškom Sistem za napajanje s praškom je sestavljen iz lijaka ali posode, v kateri je shranjen material za praškasto barvanje. Običajno vključuje naprave, kot so črpalke za prah, dovodne cevi in sita, ki prah prenašajo iz skladišča do pištole za pršenje. 🔄 Napravite za Predobdelavo Sistemi za predobdelavo se uporabljajo za pripravo substrata pred nanašanjem praškaste prevleke. To lahko vključuje postopke, kot so čiščenje, razmaščevanje, izpiranje in obdelava površine, da se zagotovi dobra oprijemljivost in trajnost prevleke. 🧼 Peč za Strjevanje Peč za strjevanje je ključna komponenta praškastega barvnega sistema. Uporablja se za segrevanje prevlečenega substrata na ustrezno temperaturo, da se prah stopi, tekoče preide in strdi v trajno površino. Peč običajno vključuje sistem za transport ali police, ki prenašajo prevlečene dele skozi peč. 🔥 Sistem za Odsesavanje V sistemu je nameščen sistem za odsesavanje, ki odstranjuje odvečni prah, pare ali hlapne spojine, ki nastanejo med postopkom nanašanja prevleke. Pomaga pri ohranjanju čistega in varnega delovnega okolja za osebje in preprečuje kopičenje prahovih delcev v zraku. 🌬️ Iščete rešitev za Praškasto Barvanje? Iščete prilagojeno rešitev za praškasto barvanje? Specializirani smo za zagotavljanje rešitev za praškasto barvanje, ki so prilagojene vašim specifičnim potrebam. Ne glede na to, ali imate specifične zahteve glede barve, kompleksnih zasnov ali težkih substratov, je naš izkušen tim pripravljen zagotoviti izjemne rezultate. 💡 Fsdpjun Sd Ujfx Aplsgb Kontaktirajte nas še danes, da se pogovorimo o vaših potrebah in nam dovolite, da razvijemo prilagojeno rešitev za praškasto barvanje. 📞 Kontaktirajte nas še danes!

Stanje: rabljeno, prevoženi kilometri: 999 km, prva registracija: 01/2005, Rear-mount spreader: ORANGE: - Bertsche - Model EBW - Year of manufacture: 10/2007 Fjdpfsqxuazox Apljgb - 120 cm wide - 160 kg - Support stands SILVER: - Kiefer - Model WS120WA - Year of manufacture: 2005 - 130 cm wide Price per unit A video of this offer can be found at You can view our complete vehicle inventory at Receive notifications of all newly listed vehicles via email – sign up for our NEWSLETTER! Errors and typographical mistakes possible, subject to prior sale!

Stanje: rabljeno, Leto izdelave: 2018, nosilnost: 2.000 kg, dvižna višina: 6.580 mm, prosto dvigovanje: 120 mm, tip droga: simpleks, gradbena višina: 3.870 mm, širina nosilnega okvirja vilic: 900 mm, Standard Težišče tovora: 500 mm ISO razred: ISO razred 2 = 1.000 - 2.500 kg Tip jambora: Standard Fgjdpfeynhdljx Apljb Opis: Rabljeni LIFT-TEK dvižni jambor primeren za Hyster J 2.0 XN. Nosilec vilic: 900 mm širok z integriranim bočnim pomikom.

Stanje: novo, številka stroja/vozila: eca976917d325d4adc41b69e8, lastna masa: 7.200 kg, največja dovoljena obremenitev: 27.800 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r 22,5, Further Information Chassis Semi-Trailer Freight Forwarding High-strength fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m load length in the retracted state. 13 pairs of welded hooks for lashing strap attachment on the cross members 23 pairs of recessed lashing rings in the outer frame, each rated for 3.5 t Outer frame with load-lock profile for securing lashing straps Note! Not suitable for use with side walls! 24 t 2-speed landing gear in reinforced design for coupling/uncoupling under load, single-sided operation, with semi-circular lower part and straight mounting plate, with push compensation Wheel chocks with holder Aluminum side underrun protection Rear underrun protection Half-shell mudguards With anti-spray flaps in accordance with EC standards 1 spare wheel holder for 1 spare tire, with wheel fastening kit 1 stake storage box sealed on the sides, open at the top, beneath the loading floor, doors on both sides, width = 450 mm / height = 400/420 mm / depth = 2460 mm 6 pairs of extendable stanchion pockets for square stanchions 80x80 mm, extendable from load width 2000 mm to 3100 mm 4 pairs of stanchion pockets recessed in the outer frame, for square stanchions 80x80 mm 11 stanchion pockets embedded centrally in the floor, for square stanchions 80x80 mm, with reinforcement carrier, positioned between the outer stanchion pockets 5 x 3 pairs of stanchion pockets recessed in the outer longitudinal beams, for square stanchions 80x80 mm, including reinforcement carriers – for front and rear load securing during reinforcing mesh transports, 2x5000 mm or 2x6000 mm 6 lightweight insert stanchions, W=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with upper cable guide for strap tensioning 12 lightweight insert stanchions, W=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with welded lashing eyes at the bottom on both sides Note: Stanchion pockets and insert stanchions are not designed for the sole securing of long material, pipes, etc. without lashing 2 plastic toolboxes, with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (lock not included) 6 reinforcing steel winches with wire rope and counter hooks, with cable passage through the outer frame, 1 detachable mounting gearbox for the rebar winches – supplied loose (without frame mount) Telescoping Main frame telescopable Extendable by max. 4,000 mm and can be locked in place approx. every 500 mm Locking with pneumatic locking pin + frame lock indicator on both sides, operation via manual button, controls for brake/lock and suspension on the front left of the chassis in front of the axles Storage compartment between longitudinal beams in extended position Axles & Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing steering, with automatic reverse lock via reversing light, and additional locking function on the vehicle via manual button, as well as manual switching in the towing vehicle (pin 10), without truck installation. Axle spacing staggered mm Fgedpfx Apsi Ri Szsljb Air suspension 1st axle automatic lift axle, additionally electrically controllable from the truck, with traction aid, without truck installation (traction aid functional up to 30% axle overload and up to a speed of max. 25 km/h) Brake System 2-line compressed air brake system Color-coded piping for easy maintenance Spring-loaded par

Stanje: novo, številka stroja/vozila: 56c59c8aba35227ffb44c9f75, lastna masa: 11.350 kg, največja dovoljena obremenitev: 26.650 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Jumbo semi-trailer chassis Steel welded construction with closely spaced cross members, reinforced design, low-bed outer frame profile, suitable for the transport of construction machinery up to 32,000 kg and with a maximum machine width of up to 2,550 mm. Fifth wheel plate with interchangeable 2” king pin. Rear taper approx. 1,200 mm and 7°. Ramp roller closed at the top with steel/chequer plate. In the low-bed area: Omega rail mounted laterally below the outer frame for curtain mounting and as a spacer to the lashing mushrooms, not in the wheel area. For hydraulic lift table: additional fixed lightweight outer frame with Omega profile; lift table can be raised with the tarpaulin closed! 24 t 2-speed landing gear, single-side operation, with semi-circular base and straight mounting plate, load compensation, free rear swing radius approx. 1,950 mm. Foldable rear supports 2 wheel chocks with holders Aluminium side underrun protection Quarter-round mudguards in front of and behind each axle Anti-spray flaps behind each axle Steel rear underrun protection Full-width rear spray flap 4 stainless steel toolboxes, w=800/h=350/t=350 mm, polished lockable doors, 2x on front left and 2x on front right before the first axle Hydraulic lift table behind gooseneck, approx. 3,000 mm long, hydraulically raisable to drive over the gooseneck, with mechanical locking in raised position (cylinders angled for ground clearance, Fliegl standard). Operation from front right + additional remote control operation (same device as ramp control). Lift table operable with closed tarpaulin! Curtain mounting in the lift table area on a separate lightweight Omega-profile outer frame; lift table operable with closed tarpaulin. Lashing mushrooms usable even when table is lowered! Lashing eyes Gooseneck: 4 pairs of 5 t lashing eyes recessed into outer frame 2 pairs of lashing mushrooms recessed at the top and on the side of the outer frame Low bed 8 pairs of lashing mushrooms (top and side of outer frame), each 10 t 9 pairs of 5 t lashing eyes recessed into outer frame Axles & suspension SAF drum brake axles Last axle self-steering, with automatic reverse lock via reversing light, additional manual locking on vehicle Air suspension with raise/lower valve and auto-reset function Raise/lower function with quick exhaust 1st axle automatic lift axle, including forced lowering and traction aid, activated by 3x braking (traction aid works up to 30% axle overload and max 25 km/h) Axle lift below recommended driving height; therefore, no warranty against tyre damage Wheels and tyres 235/75 R17.5 From leading manufacturers Twin steel rims, factory silver Braking system 2-line compressed air brake system Spring-type parking brake 2 fail-safe coupling heads (front), no connecting line EBS, Electronic Braking System with front EBS socket, no connection cable Note: Trailer may only be towed by tractors that ensure ABS is working! Axle load detection via EBS in truck, without truck installation (not a certified scale) Electrics 24 volt, multi-chamber rear lamps, yellow LED side marker lighting 2 white LED front position lights 2 white/red lane assist rear lights Fgjdei Riw Aspfx Aplsb 1 rotating beacon with bracket, switchable via parking light (detachable light) 2 pairs of double LED warning boards, extendable up to 3,000 mm 2 x 7-pin and 1 x 15-pin fail-safe sockets at front, without connecting cable

Stanje: novo, številka stroja/vozila: 087c7b6bc0c6118a84279fb46, lastna masa: 4.100 kg, Further Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without raised edges, loading area tapered downward after the rear axle by approx. 8°. Longitudinal beams made from steel sections. Steel frame, hot-dip galvanized, with stainless steel sheet at the bend for cable guidance, flush with the platform floor. Suitable for trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm. Fgsdsi Riytepfx Apljb Tow Coupling Tow coupling, ball head D24.8: (height from ground to top approx. 480 mm), towing capacity 2,800 kg, including installation and electrics with 7-pin socket. Accessories/Conversions 2 brackets for wheel chocks, folding side underrun protection in aluminum – adopted from the truck! Rear under-run protection in steel, quarter shell fenders with mudflaps – adopted from the truck! Toolbox Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with padlock (lock not included). 1 holder for 3 fuel canisters. 1 stainless steel toolbox, w=600 / h=400 / d=500 mm, with polished door, lockable, includes control valve and electrohydraulic power unit. Controller box with peripheral door seal and sealing grommets at the rear (splash-proof as technically possible). Electrics Adaptation of existing taillights, 2 additional recessed LED work lights in the bulkhead, switched via parking light with switch outside on front wall, left side. 1 LED work light at the rear, with integrated reversing camera, including color flat screen monitor, monitor with suction cup mount and power supply via 24 Volt, voltage divider 24/12V, 1 x 7-pin 12V socket = plug adapter. Flooring Mega Grip made from serrated galvanized grating, steel floor gratings 50/4 including mesh size 50 mm. Top with anti-slip serrations, laid continuously over main frame platform. Lashing Points 12 pairs of swivel-mounted lashing rings in the outer frame – each 10 tons, first ring at the very front, last at the very rear. 1 lashing ring centrally at the rear for fastening winch cable. 12 lashing rings recessed in the floor, each 5 tons (not in rear bevel). Bulkhead Bulkhead made from sheet steel, height 1,500 mm. Fixed with corner posts at bulkhead height. Each with 2 x 12 hanging brackets for lashing chains mounted left and right on the bulkhead. Winch Electric cable winch, 24 Volt, pulling capacity approx. 6,350 kg, mounted centrally at the bulkhead (recessed with loading bridge), operated by radio remote control, cable length min. 35 m x 9.5 mm, with roller fairlead, cable pressure plate, incl. overload protection, winch freewheel clutch, handheld control with approx. 5 m cable, winch acceptance certificate, civil engineer test report, logbook, and operating instructions. Ramps Length 3,500 mm – 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg/pair (also for ramp loading), electrohydraulically foldable and laterally adjustable – incl. electrohydraulic power unit. Approach angle approx. 8° with lowered rear axle. Ramp platform made of galvanized steel grating (as platform floor), with anti-slip serrations. Ramps can be pushed together to approx. 170 mm, ramp extension hydraulically. Ramps preconfigured for use at loading docks with full load capacity. Ramp locking with 2 lashing straps. Ramp tip stepped (nose min. 150 mm) for use at loading docks. Operating instructions included. Ramps lowering valve for ramp lowering. Support Adjustable support legs at rear, foldable and length-adjustable

Stanje: novo, številka stroja/vozila: f80f2330e1318ef03bc20755e, lastna masa: 3.200 kg, največja dovoljena obremenitev: 35.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r22.5, Further information: Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, only 2 longitudinal frame members as double-T beams for subsequent attachment of a front end gantry in the latest/current version, outer frame slightly inclined with load-lock profile for tie-down strap hooks (Note: to hook-in the straps in connection with side walls, the side boards must be opened!), 24-ton, 2-speed landing gear, single-sided operation, with straight lower section, without compensating slide, wheel chocks with bracket, folding aluminium side underrun protection, extendable galvanized steel rear underrun guard, half-shell mudguards delivered loose, not installed, with anti-spray splash guards behind each axle, 1 plastic water tank, approx. 30l capacity, installed front left. BPW disc brake axles with 430 mm disc diameter, axles/chassis laser-aligned to minimize tire and fuel consumption, air suspension, 1st axle automatic lift axle, also manually lowerable, operable via manual control on the vehicle. Fgedpfx Apoi Riwqolsb 2-line compressed air brake system with 1 standard central air tank, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, without connecting hose, EBS (Electronic Braking System) with EBS socket at the front, without connecting cable, EBS 2S/2M, test port for brake cylinder pressure at the external EBS module. Note: This trailer may only be towed by tractors that guarantee the effectiveness of the ABS! With lift & lower valve, control unit + brakes integrated into the frame as with a tipper semi-trailer, mounted in front of the axles. Brake pad wear indicator for disc brakes via ABS/EBS lamp in the truck. 385/65 R22.5 Continental brand, steel rims, factory silver. 24 Volt, multi-chamber lights, side yellow LED lighting as on tipper semi-trailer, 3000 mm width must be observed, 2 front white LED position lamps, supplied loose, 2 white/red lane marker lights at the rear, 2 x 7-pin non-interchangeable sockets at the front, without interconnecting cable. Germany, EC 2007/46 type approval for complete vehicle, 24/7 service hotline, prepared for double number plate holder (single line), 1 x plastic and 1 x stainless steel interchangeable holder. Warning sign according to ECE - 70, aluminium, loose, EBS, safe parking, without contour markings / reflective tape according to ECE R 048. Frame: DB 7350 Nova Grey, landing legs: Black coated Available immediately!

Stanje: novo, številka stroja/vozila: c78894767223a51dd199030f3, lastna masa: 4.600 kg, Further Information Frame Steel welded construction made from fine-grain steel, hot-dip galvanized, flat platform without raised edges. The loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made from steel profiles, steel frame hot-dip galvanized, with stainless steel plate (NIRO) at the bend to guide the cable, flush with the floor. For trucks with wheelbase: 2nd axle at 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm. Trailer Coupling Ball-type tow hitch D24.8: (height from the ground to the top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrics with 7-pin socket. Accessories/Modifications 2 chock holders, foldable aluminum side underrun protection – taken from the truck! Fsdpfjk Unitox Aplogb Steel rear underrun protection, quarter-shell mudguards with mud flaps – taken from the truck! Toolbox Plastic toolbox with drawer and shelf, W = 650 / H = 520 / D = 670 mm, lockable with a padlock (lock not included). 1 bracket for 3 jerry cans. 1 stainless steel toolbox, W = 600 / H = 400 / D = 500 mm, with polished door, lockable, includes control valve and electrohydraulic pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash water protection as far as technically possible). Electrics Adaptation of existing tail lights, 2 additional LED work lights recessed into the front wall, switched via parking lights with switch on the outside front wall left. 1 LED work light at the rear with integrated reversing camera including color flat-screen monitor with suction cup mount and power supply via 24 volts, voltage divider 24/12V, 1 seven-pin 12V socket adapter. Floor Mega Grip made from serrated, galvanized grating, steel gratings 50/4 included, with 50 mm mesh. Top side with anti-slip serration, laid continuously over the entire main platform area. Lashing Rings 12 pairs of lashing rings freely pivotable on the outer frame - each rated to 10 t. 1 at the very front and one at the very rear. 1 lashing ring at the rear center for attaching the winch cable. 12 lashing rings recessed centrally into the floor, each rated to 5 t. (not included in rear slope). Front Wall Front wall made from steel sheet, height 1,500 mm. Fixed with corner posts up to full front wall height. 2 x 12 hanging brackets for lashing chains mounted left and right on the front wall. Winch Electric cable winch, 24 volts, pulling force approx. 6,350 kg, mounted centrally at the front wall (recessed in the loading bridge), operated via remote control, cable length min. 35 m x 9.5 mm, with roller fairlead, with cable pressure plate, including overload protection, cable freewheeling clutch, hand control with approx. 5 m cable, winch acceptance, civil engineer test report, test log, operating instructions. Loading Ramps Length 3,500 mm – 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg per pair (also for ramp loading), electrohydraulically tiltable and laterally movable – including electrohydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle. Ramp support surface made from galvanized steel grating (like the loading bridge floor), with anti-slip serration. Ramps can be compacted to approx. 170 mm, hydraulically extendable. Ramp prepared for operation at loading dock with full load capacity. Ramp locking with 2 tension belts. Ramp tip offset (nose min. 150 mm) suitable for placement at loading ramps. Ramp operation labeled. Drop brake valve for l

Stanje: rabljeno, Leto izdelave: 2016, Overview The bottling line for glass bottles (single-use and returnable) was in operation until recently at a small brewery in Germany. The system is configured for 0.33l longneck bottles and can fill up to 2,500 bottles per hour. The machine is still operational and can be inspected at any time by arrangement. The bottle washer and bottle unpacker can also be purchased separately. Technical Details Capacity: 2,500 bottles/hour Formats: Set up for 0.33l longneck bottles Filling temperature: 6°C Packaging: - 0.33l longneck bottles in 24-bottle cartons - 0.33l longneck bottles in 24-bottle modular crates Individual Machines / Line Components - New Glass Depalletizer | Füllmeister | Year: 2016 - Filler + Capper | H&K | VVF 14/3 | Year: 1966 Overhauled in 2016 with: - Pre-evacuation - New rotary ball joint Fodpfxel Hx Rpe Apljgb - New stainless steel table - New electrical system - New stainless steel valve control cabinet - 0.33-liter format guiding set - Sihi vacuum pump - Seals on lifting cylinders and filling valves replaced in 2023 - Vacuum and overpressure valves fitted with new seals and springs in 2023 - Bottle Unpacker | Joha | Year: 1982 - Packing head for 24 bottles in modular crate - Bottle Washer | Silmo | Praktika | Year: 1983 - 12 bottles per row - Labeler | Krones | Vinetta | Year: 1999 - Type 480-6-3-180 - Labeling stations for back labels, front labels and neck bands - Each with three glue pallets and gripper sponges - Glue pallets, gripper sponges, and sponge roller at bottle outfeed renewed in 2023 - Krones Unipump-H glue pump with glue heating - Packer | Pexco | Year: - - 1 head for 24 bottles in modular crate - New electrical installation and overhaul in 2016 - Residual Liquid and Finish Control | Miho | LC2000 - Detection of residual caustic from bottle washer - Closure control for crown cork/metal - Incl. Silmo inspection screen for visual control of cleaned bottles - Crate Washer | Fleischer - For longitudinal cleaning of empty plastic crates - Module size: 300x400mm - Overhauled in 2016 - Compressor | Alup | Allegro 19-10 | Year: 2016 - Oil-free - 4,897 operating hours Transport - Bottle transport: various conveyor belts + 90° bends - Crate transport/roller conveyor: overhauled with stainless steel frames and feet in 2016

Stanje: rabljeno, Leto izdelave: 2005, Pregled Ta aplicator za rokave je bil izdelan leta 2005 pri francoskem podjetju Sleever International. Model Powersleeve je bil uporabljen za nanos skrčljivih tulcev na dve 1,5-litrski steklenici v dvojni embalaži (2×1,5 L). Stroj je še vedno nameščen in priključen, vendar ni več v uporabi ter bo na voljo od 20. decembra 2025. Tehnični podatki Zmogljivost: 12.000 flaš/h Formati: dvojni paket (2 × 1,5 L) Uporaba: jabolčnik, gazirane pijače, brezalkoholne pijače Mere stroja: 1000 × 155 × 250 cm Napajanje: 6 kW Stanje: dobro, funkcionalen izklopljen stroj. Fjdpfx Aoxqn R Nspljgb

Stanje: rabljeno, Leto izdelave: 2018, Overview The offered pouch filling line was designed and supplied in 2018 by a Swiss company. The main manufacturer is Linapack. The machine was used only for seasonal production (2 months a year), so the operating hours are very low. As sales figures are no longer increasing, the seller has decided to sell the system and discontinue production. The unit is still installed and can be inspected. It is suitable for processing various pouch formats and allows hot filling up to 85°C. The current owner used it for cocktails, but it is also suitable for various other non-carbonated beverages. Technical Details - Capacity: 50 pouches/hour, depending on the volume, 750 – 900 l/h - Pouch dimensions: - Width: 80 – 180 mm - Height: 100 – 300 mm - Filling temperature: 71 – 85 °C - Siemens PLC Line components - 1,000 l buffer tank - Agitator - Flowmeter - Level sensor - Cleaning spray ball - Integrated into the pasteurization control Fsdpfxovptt Re Aplogb Flash pasteurizer Kreuzmayr PAS-900 - Capacity: 750 – 1,000 l/h - Steam heated - Fully automatic - Automatic cleaning with hot water, steam, acid, and lye - With tube-in-tube heat exchanger Automatic Filler Linapack LFS-1000 Duplex with Siemens PLC - Seven-station system - Motorized magazine with pick-and-place system for pouch feeding - Opening of pouches using vacuum grippers - Filling station with flowmeter and temperature sensor, with automatic reject if temperature too low - Pouch sealing - Seal cooling - Pouch emptying - Checkweigher - Pouch cooler and dryer: - Water bath cooling with UV lamps for sterilization - Drying by blower (five nozzles) - Conveyor belts and collecting table

Stanje: rabljeno, Leto izdelave: 2007, Pregled Ta etiketirni stroj za palete je bil izdelan leta 2007 pri nemškem podjetju Logopak. Proizvajalec: Logopak Model: 920 PF Samolepilna etiketa za palete. Velikost etikete: A5. Fjdpfx Apoxbf Nqelogb

Stanje: rabljeno, Leto izdelave: 2000, Overview This Auxiemba Gacela RSA 9-III-IZ is a self-adhesive labelling machine manufactured in 2000. It was used for labelling Cava (sparkling wine) bottles with a capacity of 6,000 bottles per hour and can be adapted for wine bottles (8,000–10,000 bottles per hour). The machine has already been dismantled and placed in storage. All technical documentation is available. Technical Details Capacity: 6,000 bottles per hour for Cava 8,000–10,000 bottles per hour for wine Labelling stations: 3 heads (front, back, neck label) Option to retrofit a fourth head Label feed: 3 double-roll unwind stations with splicing function Electrical specifications: Voltage: 3 x 380V Frequency: 50 Hz Power: 20 KVA Fodpfxev Aafmo Aplsgb

Stanje: rabljeno, Leto izdelave: 2017, Overview  This Krones Sleevematic sleeve applicator from 2017 is in excellent condition and has only 1,563 operating hours. The machine is capable of applying sleeves at a rate of up to 30,000 bottles per hour (500 BPM). It is equipped with a twin-head sleeve applicator system and a steam-powered shrink tunnel (Shrinkmat). Change parts for handling 300 ml, 500 ml, and 1500 ml PET bottles are included in the scope of delivery. Technical Specifications - Output: 30,000 bottles/hour (500 bottles/min) - Sleeve applicators: twin-head sleeve feed system - Shrink tunnel: steam-powered (Shrinkmat) - Bottle formats: 300 ml / 500 ml / 1,500 ml - Condition: very good, low operating hours - Operating hours: 1,563 Fedjwlka Eepfx Aplogb Scope of Delivery - Krones Sleevematic sleeve applicator - Twin-head sleeve feed system - Shrink tunnel (steam) - Bottle format change parts for 300/500/1500ml PET bottles

Stanje: rabljeno, Leto izdelave: 2009, Overview Fjdpfx Apou Rwdyslsgb This sleeve labeling machine, model 4300 DE-ST9, was manufactured in 2009 by FUJI SEAL EUROPE B.V. Photos and an operating video are available, as well as the general layout of the line. Technical Details Manufacturer: FUJI SEAL EUROPE B.V. Model: 4300 DE-ST9 Year of manufacture: 2009 Most recent format: 0.25 liter

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, We have various models of chiller units for TRUMPF laser cutting machines in stock! Having issues with your chiller unit? Contact us! Chiller units for all common CO2 lasers available from stock, whether 3.2 kW, 4 kW, 5 kW, or 6 kW. Fgodpfx Apswww Dnsljb All other spare parts are also available!

Stanje: rabljeno, prevoženi kilometri: 390.000 km, prva registracija: 06/2006, Leto izdelave: 2006, DB AXOR 1823 L A3 Tanker Truck for Diesel and Heating Oil, 2 Compartments, 14,000 Liters !! Very good overall condition !! Chassis Features: • EURO 3 • 230 hp • Displacement: 6,374 cc • 8-speed manual transmission • Differential lock • Leaf/air suspension • Radio with CD player • Multifunction steering wheel • On-board computer • Warning horn • Driver airbag • Roof hatch • 1 x 250-liter fuel tank • Wheelbase: 3,900 mm • Unladen weight: 7,600 kg • Payload: 10,400 kg • GVW: 18,000 kg • Tyres: 315/70 R 22.5 • Tread depth: 14/14, 13/13, 14/14 mm TANK BODY: ESTERER • Year of manufacture: 2006 • For diesel and heating oil • 2 compartments Fodpfjx Nc Enox Aplsgb • 7,000 L + 7,000 L = 14,000 L Total • FMC measuring system by Senning, Type GMVT 805-J • TKZ unit (temperature-compensated meter) • Printer • 2 x hydraulic hose reels with remote control • ADR certified – new! • Tank inspection valid! - German vehicle! - One owner! - Next general inspection (HU/TÜV): 04/2026 - Next safety inspection (SP): 10/2025 Errors and prior sale excepted! = Further information = Please contact Joannis Arpantzanis or Kai Bühler for further details.

Stanje: rabljeno, Leto izdelave: 2020, FLIEGL SDS350 15 metrov X-TRA DOLGA RAVNA kontejnerska šasija za 2 izmenljivi nadgradnji ali 2 kontejnerja !EKSTRA DOLG! !! Dolžina 14,85 m!! • Pripravljeno za 2 x 7,45 m nadgradnji • ali 2 x 20-ft kontejnerja • ravno šasijo • 3 x SAF zračno vzmetene osi, vsaka 8 t • Dvigalo/spuščanje • ABS • ASR Mere in teža vozila: • Dovoljena skupna masa: 35.000 kg • Lastna teža: 4.100 kg • Mere: 14.850 x 2.550 x 1.200 mm • Pnevmatske gume: 385/55 R22.5 • Globina profila: 13/13/11/12/12/9 mm - zelo dobro stanje, skoraj ni bil v uporabi! - Tehnični pregled / HU / SP: NOVO! - SP: 01/26 - Nemška polprikolica! - Prvi lastnik Pridržujemo si pravico do napak in vmesne prodaje! = Dodatne informacije = Letnik: 2020 Za več informacij kontaktirajte Joannis Arpantzanis ali Kai Bühler. Fsdpfx Ajwtbvtjplsgb