Lisec Lisec Stiskalnica Za Polnjenje S Plinom Fps-36/25U2T nakup rabljenega (120.555)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Nemčija
614 km
Enota za vpenjanje s stisnjenim zrakom
NARADI PRAHAJU 30
Pokliči
Stanje: rabljeno, Leto izdelave: 1986, Technical details:
Bwodpfx Afou Nkk Rs Den
Weight: 7.5 kg
Number of strokes: 2000 strokes/min
Torque: 15 kp
Dimensions (L x W x H): 170 x 160 x 130 mm
PNEUMATIC CLAMPING UNIT
- Application: Operation of vise clamping
- Consists of pneumatic motor, impulse mechanism, and control mechanism.
- Compressed air required
- Average operating pressure: 0.4–0.6 MPa
- Air consumption: 1.1 m³/min at 0.5 MPa
- Vise clamping force: 80 kN
Accessories:
- Operating manual
- 13 units available
As per illustration.
Mali oglas
Nemčija
614 km
Hladna stiskalnica za oblikovanje
KUHNE MASCHINENBAUKEPK-1
Pokliči
Stanje: rabljeno, Tehnične podrobnosti:
Dolžina stebla: maks. 30 mm
Zmogljivost: 600 kos/min
Največji premer žice: 5 mm
Delovno območje: 30 mm
Dimenzije krmilne omarice DxŠxV: 1,45x0,55x2,1 m
Dimenzije stroja: 2,95x1,5x2,15 m
Dimenzije odvijalnika: 1,15x1,15x1,15 m
Mehanska stiskalnica za hladno preoblikovanje
Za proizvodnjo zakovic, verižnih zatičev, zatičev ali posebnih izdelkov. (BREZ VIJAKOV po navedbah proizvajalca)
Naprava je posebna izvedba in neuporabljena (kot nova).
Pribor:
- odvijalnik
- navodila za uporabo
Bsdsu Nfrcopfx Af Dewn
Stroj je možno prikazati v obratovanju.
i.D.
Mali oglas
Babenhausen
617 km
Stroj za oblikovanje in polnjenje
EdhardFüllgerät NEU
Pokliči
Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, skupna dolžina: 172 mm, skupna širina: 229 mm, skupna višina: 391 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 220 V, trajanje garancije: 24 meseci, Certificirano po DGUV do: 06/2028, temperatura okolja (min.): 15 °C, NOVO +++ NOVO Edhard stroj za polnjenje peciva, serija P NOVO +++ NOVO
Bwodpfx Afefxk Txe Don
Polnilnik za avtomatsko polnjenje peciva
Nastavljiva dozirna količina preko digitalne nadzorne plošče
5,5-litrski lijak z nastavkom
Namizna naprava
S tem polnilnim in dozirnim sistemom se mase neposredno dozirajo v 2 kosa peciva preko dveh 57 mm dolgih in 7 mm debelih polnilnih špic.
Plastični lijak ima kapaciteto 5,5 litra.
Motorsko podnožje sproži delovanje ob vsakem pritisku stikala.
Natančno se vbrizga nastavljena količina, do največ 800 g.
Samo pri nas: preverjeno po DGUV V3
Priključek: 220V, 44 W
Mere: 172 x 391 x 229 mm (D x V x Š)
NOVA naprava, SAB preverjena
Z garancijo in servisom rezervnih delov
Obiščite našo trgovino Milbrandt s testno pekarno in številnimi pekarskimi stroji ter napravami!

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Hessisch Lichtenau
682 km
Kosilnica, sedežna kosilnica, stavbna kosilnica za velike površine s košem za travo in hidravličnim
ETESIAHydro 124 DS
Pokliči
Stanje: rabljeno, Tondeuse autoportée, ETESIA type Hydro 124 D
Année de fabrication : 2003
Puissance : 15,5 kW
Bsdpfsy Ai Ntjx Af Down
Largeur de coupe : 1240 mm
Bac de ramassage : 600 litres = plus de 100 kg d’herbe
Rayon de braquage : 1250 mm
Vitesse de déplacement et de travail : max. 16 km/h
Moteur diesel 3 cylindres Lombardini FOCS 903
Cylindrée : 916 cm³
Puissance : 22 ch à 3600 tr/min
- Refroidissement par eau
- Deux lames contrarotatives de 65 cm de long avec un recouvrement de 6 cm
- L’herbe est redressée avant la coupe grâce à une forte aspiration
- Éjection centrale arrière
- Vidange en hauteur hydraulique commandée depuis le siège conducteur via un interrupteur à bascule
- Réglage électromotorisé de la hauteur de coupe de 44 à 140 mm
- Traction hydrostatique avec entraînement des roues arrière par moteurs hydrauliques
- Blocage hydraulique du différentiel
- Direction assistée hydraulique
- Double raccord hydraulique pour équipements frontaux
- Colonne de direction réglable
- Compteur horaire : 1539 heures de fonctionnement
Largeur totale : 1280 mm
Longueur : 2800 mm
Poids : 716 kg
Bon état
Mali oglas
Bretzfeld
536 km
Stiskalnica za furnir
JOOSunbekannt
Pokliči
Stanje: rabljeno, Dimenzija plošče: 2.500 x 1.1250 mm
Odpiralna širina: 300 mm
Število etaž: 1 kos
Teža stroja ca. 3 t
Bwedoy Ty E Tepfx Af Don
Leto izdelave: neznano
Mali oglas
Ensisheim
612 km
Stroj za rezkanje s fiksno posteljo
CorreaA 25/25
Pokliči
Stanje: rabljeno, Leto izdelave: 1990, Bettfräsmaschine CORREA A25/25
Verfahrwege X: 2500 mm
Verfahrwege Y: 1200 mm
Verfahrwege Z: 1000 mm
CNC-Steuerung: HEIDENHAIN TNC 355
Spindelaufnahme: SK 50
Spindelmotor: 30 PS
Spindeldrehzahl: 2–3000 U/min
Bwjdpfx Aozbqkbef Don
Tischgröße: 3000 x 1000 mm
Baujahr: 1990
Max. Tischbelastung: 7 t
Manueller Schwenkkopf
Spannung: 380 V
Abmessungen (L x B x H): 5000 x 3000 x 3000 mm
Gewicht: 16,5 t
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMPP 180
Pokliči
Stanje: novo, Leto izdelave: 2026, Availability upon request
Very robust machine with high pressing force
- also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size.
Our best-selling briquetting press series
+ Proven, simple technology, ensuring extremely low susceptibility to failure
+ 25 years of experience, continuous development, and know-how
+ Several thousand machines in operation with satisfied customers
+ Excellent value for money
Optional demonstration cooling unit surcharge: + €4,980 net
(can also be retrofitted later)
* Cools the press clamp (important from 4 hours of operation) and the hydraulic oil
* Cooling unit recommended for regular operation exceeding 4 hours continuously
Commodity code: 84793010
Briquette diameter: 70 mm
Front sleeve: 125 mm
Max. briquetting stroke: 100 mm
Optimal briquetting stroke: 80 mm
Capacity (material-dependent): up to 150 kg/h*
*depending on bulk density
*based on a bulk density of 200 kg per cubic meter
Motor output: 9.2 kW
400 Volt / 50 Hz / 3-phase
Length: 2,095 mm
Width: 1,300 mm
*with large chamber 1,600 mm
Height: 1,700 mm
Weight: 1,250 kg
Oil volume: 220 liters
Silo diameter: 1,200 mm
Silo capacity: approx. 1 m³
Pump: 75 liters
Hydraulic pre-compressor
Press clamp cooling option: yes, with optional coolable press clamp
Hydraulic oil cooling option: yes
Bodpfx Afjd Nm Sie Down
Cooling of press clamp and hydraulic oil possible with optional cooling unit
Level monitoring option: yes
Continuous strand briquette option: yes (material-dependent)
Enlarged filling slider option: yes, with optional enlarged filling slider
CE compliant
Raw material requirements:
- Moisture content (atro) must be between at least 6% and a maximum of 18%
- Maximum chip length: 20 mm
- Installation temperature: heated room with at least +5°C
- Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütek SystemtechnikMPP 60
Pokliči
Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice.
+ Proven, simple technology for extremely low failure rates
+ 25 years of experience, ongoing development, and expertise
+ Several thousand machines in operation with satisfied customers
+ Outstanding price-performance ratio
Optional extras (available at additional cost):
Bodpfsgl Nlmsx Af Djwn
*Surcharge for fill level sensor, enabling automatic operation:
+ €995 net
*Surcharge for large pre-compression chamber + €970
(Recommended for very light materials such as straw, increases machine width by 13 cm)
Briquette diameter: 50 mm
Front bushing: 50 mm
Max. briquette stroke: 40 mm
Optimal briquette stroke: 40 mm
Throughput (material dependent): up to 60 kg/h*
*Depending on bulk density
*Based on a bulk density of 200 kg/m³
Motor power: 5.5 kW
400 Volt / 50 Hz / 3-phase
Length: 1,680 mm
Width: 1,100 mm
Height: 1,500 mm
Weight: 680 kg
Oil volume: 110 liters
Silo diameter: 1,000 mm
Silo capacity: approx. 0.7 m³
Pump output: 37 liters
Hydraulic pre-compressor
Press tongs cooling option: No
Hydraulic oil cooling option: Yes
Fill level monitoring option: Yes
CE compliant
Raw material requirements:
- Moisture content (atro) must be between at least 6% and max. 18%
- Maximum chip length 15 mm
- Installation temperature: Tempered room, at least +5°C
- Customer must provide protection against hydraulic oil loss
- Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje, stiskalnica za briketiranje
mütek SystemtechnikMGP 60
Pokliči
Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj!
Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa
Zmogljivost: do največ 60 kg/h
Briket: 50 mm valjaste oblike
Motor: 5,5 kW
Dimenzije: 1.900 x 1.350 x 1.410 mm
Teža: pribl. 860 kg.
Zahteve:
Bwsdpfjv Rpxlex Af Don
Izhodni material idealno krajši od 25 mm dolžine ostružkov
Vsebnost vlage 6–12 % ATRO
Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd.
Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.
Mali oglas
Neckartailfingen
511 km
Briketna stiskalnica Briketna stiskalnica za aluminij
mütekMPP NEM 300
Pokliči
Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months
---
Our bestselling briquetting press series
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, continual development, and expertise
+ Several hundred machines in operation with satisfied customers
+ Excellent price-performance ratio
The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%.
Bjdpfechqxxox Af Dswn
The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material.
The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette.
Advantages of briquette production include:
• Volume reduction of up to 90%
• Emulsion recovery
• Cost savings in storage and transport
• Cost-effective disposal
• Profitable sale
--
Briquetting Press NEM 300
Throughput approx. up to 200 kg per hour (highly depending on material).
- In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion.
- In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion.
Technical specifications:
Motor: 7.5 kW (+ 0.55 kW on the cooler)
400 Volt / 50 Hz / 3-phase
Front bushing: 125 mm
Max. briquette stroke: 100 mm
Optimal briquette stroke: 80 mm
Pump: 80 liters
Storage hopper approx. 0.5 m³ capacity (extendable)
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMPP 280
Pokliči
Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement
Very robust machine with high pressing force
- Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible.
Our bestselling briquetting press series
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, ongoing development, and expertise
+ Several thousand machines in operation with satisfied customers
+ Excellent price-performance ratio
Surcharge for cooling unit + €4,995 net (can also be retrofitted later)
* Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause)
Bwjdpfxjxfwdo Af Den
Briquette diameter: 80 mm
Front bush: 125 mm
Maximum briquette stroke: 100 mm
Optimal briquette stroke: 80 mm
Throughput (depending on material): up to 200 kg/h*
*depending on bulk density
*based on a bulk density of 200 kg per cubic meter
Motor power: 9.2 kW
400 Volt / 50 Hz / 3-phase
Length: 2095 mm
Width: 1300 mm
Height: 1700 mm
Weight: 1250 kg
Oil volume: 220 liters
Silo diameter: 1200 mm
Silo capacity: approx. 1 cbm
Pump: 75 liters
Hydraulic pre-compressor
Press jaw cooling option: yes, with special accessory coolable press jaw
Hydraulic oil cooling option: yes
Cooling of press jaw and hydraulic oil with cooling unit (special accessory)
Fill level monitoring option: yes
Continuous briquette option: yes (material dependent)
Enlarged filling slider option: yes, with special accessory enlarged filling slider
CE compliant
Requirements for raw material:
- The moisture content (atro) must be at least 6% and not exceed 18%
- Maximum chip length 20 mm
- Installation temperature: heated environment, at least +5°C
- The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMFP
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price
Machine available immediately (ex works Neckartailfingen)
Demonstration unit
Your benefits:
+ Very robust, simple technology
+ Excellent price/performance ratio
+ Suitable for continuous operation
+ Proven, well-functioning and established machine over many years
Includes control cabinet with timer operation
The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically.
Technical data:
Briquette dimensions: 30/35 mm (square)
Briquette length: 5–35 mm (depending on material)
Throughput capacity: up to max. 25 kg/h (depending on material)
Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H)
Bjdpfx Aefci D Aof Down
Machine weight: approx. 250 kg
Silo capacity: approx. 250 litres
Motor: 2.2 kW, 400 V – 50 Hz
Noise emission: 62 dB
Raw material requirements:
• Wood shavings and dust less than 15 mm in length
• Moisture content less than 15% ATRO
• Sand, stones, metals, and minerals increase wear
---
Options at extra cost:
-Timer function + €490 net
Machine is started manually and switches off automatically after the set time X.
-Fill level sensor for automatic operation + €1,450 net
Press starts and stops automatically
* NEW!!! Now also available in 230 Volt,
Motor then 3 kW instead of 2.2 kW,
Surcharge + €690 net (delivery time approx. 8 weeks)
---
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütek SystemtechnikMPP NEM 900
Pokliči
Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below
* Production time approx. +/- 6 months
The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%.
The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material.
The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected.
The more homogeneous the input material, the more uniform the briquette lengths.
Advantages of briquette production include:
- Volume reduction by up to 90%
Bwodpfx Afsgfm Rys Don
- Emulsion recovery
- Cost savings on storage and transport
- Economical disposal
- Profitable resale
Briquetting Press NEM 900:
For briquetting aluminum chips
Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm)
Last test with aluminum chips < 18 mm: approx. 260 kg/h
*More details available after a free test with your material.
Briquette diameter: Ø 70 mm
Optimal briquette length: 70 mm
Technical data:
Total connected load: approx. 31 kW
Continuous operation: approx. 22 kW
400 Volt / 50 Hz / 3-phase
Pump: 120 + 60 litres per minute
Silo: 1 m³
Silo diameter: 1200 mm
Including agitator
Oil tank: 600 litres
Dimensions (LxWxH): 2500 x 1700 x 1730 mm
Weight: 2250 kg
Hydraulic pre-compaction via ram
Main press cylinder
Vertical cylinder
Prepared for connection to a cooling unit
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
R 200
Pokliči
Stanje: dober (rabljeno), Good, used condition
Bjdpfjt Hxudox Af Down
Main motor: 11 kW
Throughput up to max. 200 kg/h
Year of manufacture: 12/2008 / Technically inspected in 01/2025
Briquette size: 150x60 mm
*Used machine, sold as seen
Functionality guaranteed upon handover
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje, stiskalnica za briketiranje
RUF4/3700/60x40
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke
Izjemno visok pritisk stiskanja: 3.700 kg/cm²
Velik lijak: 600 x 1500 mm
Format briketa: 60 x 40 mm
Zmogljivost:
Aluminijevi ostružki – do 70 kg/h
Jekleni ostružki – do 180 kg/h
Medeninski ostružki – do 220 kg/h
*odvisno od vhodnega materiala in nastavitev
Vključeno:
- Kad za emulzijo
Bwedpjw Ig Suefx Af Den
- Črpalka za emulzijo
- Oljni hladilnik
Mali oglas
Neckartailfingen
511 km
Briketirna stiskalnica Briketirna stiskalnica za aluminij
mütekMPP NEM 90
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new
only 704 operating hours
Special price for lightly used demonstration machine
Base machine: €29,990 net
Options at extra cost:
- Cooling unit: €3,995 net
- Emulsion tank: €3,990 net
The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%.
Throughput capacity: up to max. 70 kg/h (material-dependent),
Briquette diameter: Ø 50 mm,
Motor: 5.5 kW,
400 Volt / 50 Hz / 3 phase,
Pump: 40 litres
Max. briquette length: 50 mm,
Optimal briquette length: 40 mm,
Silo diameter: 1,000 mm,
Oil tank: 110 litres
Dimensions: 1750 x 1130 x 1100 mm (L x W x H)
Weight: 950 kg
Hydraulic pre-compaction via slide
Main press cylinder
Vertical cylinder
Fill level sensor: yes
Requirements for the input material
Bjdpfx Aod N Dnhof Djwn
- Max. chip length: 15 mm
- Installation temperature: temperature-controlled room at a minimum of +5°C
- Max. weight on agitator: 150 kg
- The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje, stiskalnica za briketiranje
RUFRB4/1600/80
Pokliči
Stanje: dober (rabljeno), Tehnični podatki:
Briketirni stroj v dobrem stanju
Letnik: 2007
Tehnični pregled v 06/2025
Cilindrična briketa 80 mm
Pretok do največ 150 kg/h
*le približno 3.949 delovnih ur
Bwodjwtdk Tspfx Af Don
- Hidravlična preša: briketirni stroj z izmetno stezo
- Hidravlična enota: 4 kW
- Tlak: maks. 300 bar
- Transportne dimenzije: 1585/2140/H1940 mm
- Teža: 1370 kg
Garancija delovanja ob prevzemu
Z veseljem omogočamo brezplačen preizkus!
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMFP 30
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price
Another machine immediately available (ex works Neckartailfingen)
* Includes 1-year warranty.
Your advantages:
+ Very robust, straightforward technology
+ Excellent value for money
+ Suitable for continuous operation
+ Long-established, reliable machine
Includes control cabinet with timer operation
The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically.
Technical data:
Briquette dimensions: approx. 30 x 30 mm (square)
Briquette length: 5-40 mm (material-dependent)
Throughput capacity: up to 20 kg/h max. (material-dependent)
Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H)
Machine weight: approx. 250 kg
Silo capacity: approx. 250 litres
Motor: 2.2 kW, 400 V - 50 Hz
Noise emission: 62 dB
Material requirements:
- Wood shavings and dust smaller than 15 mm in length
- Moisture content less than 18% ATRO
Bedpjd Nnwljfx Af Djwn
- Sand, stones, metals, and minerals accelerate wear
---
Options at extra cost:
- Timer function + €490 (net)
Machine is started manually and switches off automatically after set time X.
- Fill level sensor for automatic operation + €1,450 (net)
Press starts and stops automatically
* NEW!!! Now available in 230 Volt,
Motor then 3 kW instead of 2.2 kW,
Surcharge + €890 (net) (delivery time approx. 8 weeks)
- Special pressing units + €2,950 (net)
---
Mali oglas
Neckartailfingen
511 km
Balirka s sistemom za odsesavanje prahu
mütek
Pokliči
Leto izdelave: 2024, stanje: novo, Overview – The different variants
*Not every option is required:
Optional:
- Bale breaker MHB from €24,990 net
- Straw mill MHZ from €7,980 net
- Special hopper €970 net
- Cyclone from €3,750 net
- Sheet metal silo demo unit with discharge (only sketched in photo)
*optional, if you want to feed with a wheel loader
Unit price net from €14,750 – demo unit
- De-dusting screw conveyor – length approx. 4m
Equipped with 4 screens on the bottom that are extracted/suctioned.
Unit price net from: €9,750
- Extraction components/hoses flat rate €945 net
- Control for complete installation
Unit price net: €2,750
- Demonstration extraction unit MMJET 160, with cleaning
Connection 160,
Bwodpeff Sbiofx Af Dsn
Fan 2.2kW
Air flow 1850m³/400V
automatic compressed air cleaning
Unit price net from: €6,950
- Bale press B 400
Bale approx. 400x400x800mm (height adjustable)
Up to 30 bales per hour with approx. 20kg each
from €59,995 net
*A reference installation (bale press) is located at ZIP code 64579 Gernsheim
Technical Data:
Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request)
Bale weight approx. 20 kg (depending on material)
Performance: approx. 30 bales per hour
Buffer tank approx. 0.7m³ capacity
Min./max. level sensors in the tank
Hydraulic pre-compressor
Hydraulic pressing ram
Hydraulic power unit, valve block with oil tank
Pump 18.5 kW / 50 liters
Rollers in press channel for easy bale ejection
Dimensions (L x W x H): 3105 x 2830 x 2455 mm
Weight approx. 1,500 kg
mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation.
The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO).
The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting.
mütek bale presses are equipped with a switch cabinet for control.
In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request.
Advantages of producing bales include:
- Simple and safe storage
- No loose dust
- Minimization of storage volume
- Reduced transport volume
*Raw material requirements:
- dry (max. 30% ATRO)
- maximum length 35mm
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
RUFLignum Classic
Pokliči
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 29 h, Another machine available immediately, ex works Neckartailfingen
*Subject to prior sale
*Round silo available at additional cost
Press only deliverable with an additional plant component,
such as chipper, granulator, hammer mill, screw conveyor, belt conveyor with overbelt magnet, or extraction system
RUF briquetting press for rectangular briquettes
Very robust and established machine
The ideal machine for professional, industrial briquette sellers.
Type Classic – throughput up to 425 kg/h *material dependent
Options for an extra charge – plant engineering / mütek Systemtechnik:
- mütek Shredder MRZ size reduction technology
Bwsdsfhql Topfx Af Djn
- Conveyor belts
- Overbelt magnets
- Extraction systems, optionally with rotary airlocks
- Screw conveyors
- Silos
- Control system integration of all types
- Semi-automatic packaging technology
Your benefits:
Key point:
+ Highly established, mature die-press thanks to 25 years of experience. The challenge and expertise are in the details, e.g. use of top-quality valves and cylinder seals.
+ Suitable for 24h operation
+ Long service life
+ Low maintenance costs
+ Compact design
+ High energy efficiency due to innovative hydraulics
Technical data – Briquetting press:
Throughput: up to 425 kg/h*
*depending on the bulk density of your input material
*based on a bulk density of 200 kg per cubic meter
Exact information available after successful test with your material. If no test material is provided, we cannot guarantee briquette quality or throughput.
Briquette dimensions: 150 x 60 mm
Briquette length: 40 to 105 mm (adjustable)
Hydraulic pre-compressor
Hydraulic main compressor
Pressing pressure: up to approx. 1700 kg/cm²
Hydraulic system with 260-liter oil tank
Pump motor: 30 kW / 400V / 50Hz / 3 phase
Manual control of all cylinders
Control cabinet "dust protected"
with PLC control and touch display
Total power consumption of the briquetting press: approx. 33 kW
Raw material requirements:
- Moisture content (atro) must be min. 6% to max. 15%
- Maximum chip size: 20 x 2 x 2 mm
- Ambient temperature at installation: minimum +8° C
- Material feed must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMAP 1200
Pokliči
Stanje: dober (rabljeno), Refurbished used machine
*Options at extra cost, see below
with full 1-year warranty
Delivery time approx. 16 weeks after order
Technical specifications:
Throughput capacity up to max. 1,200 kg/h, depending on material
(e.g. sawdust with a bulk density of 180 kg/m³)
Briquette diameter: 75 mm
Including 2 m press channel
Main motor power: 45 kW
Feed auger with geared motor: 2 x 2.2 kW
Compactor auger: 2 x 5.5 kW
Distributor auger: 2.2 kW
Hydraulic pump motor: 0.37 kW
Total connected load: 65 kW
Control panel with plain text display for operating states
and load display for main drive and feed augers
PLC control: Siemens S7/300 with operating hours counter in the control cabinet
Machine has CE mark
Automatic start/stop function
Dimensions: 3,100 x 860 x 1,800 mm (L x W x H)
Weight: 4,500 kg
Options:
Silo for MAP series (only suitable for a MAP 1200 press)
- Storage silo above the machine -
Capacity approx. 6 m³, robust steel construction with agitator discharge and fill level sensor.
€19,700 net plus VAT.
-Temperature control unit for press tools
To maintain temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat
Prewired – absolutely necessary for operation
Including corresponding control
€7,850 net
-Guillotine for cutting briquettes to length
Compressed air supply required on site
€6,940 net plus VAT.
-Transfer pipe / cooling section (nominal: 4 x 2 m)
Per 2 meters €990 net
Assembly / commissioning (nominal per press approx. 2–3 days on site)
Charged according to actual effort and time, invoiced separately. The following rates apply:
Service technician/mechatronics engineer per assembly and travel hour: €129.00
Bwjds E Dquspfx Af Don
Overtime: 25% surcharge
Each Saturday/night hour: 50% surcharge
Each Sunday/public holiday hour: 100% surcharge
Daily allowance per technician: depending on country
Per car/van and distance kilometer: €0.98/km
Travel and accommodation will be invoiced on an actual cost basis or as a flat rate at the buyer’s expense.
Material testing with customer-provided material (by arrangement, up to max. 750 kg) – €1,970 net flat rate
----
Raw material requirements:
- Moisture content (atro) must be between a minimum of 6% and a maximum of 18%
- Maximum chip length: 20 mm
- Ambient temperature: heated room with at least +5°C
- Material must be free of metals and mineral contaminants. Damage to press tools and/or increased wear may otherwise occur.
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
RUFRB 220
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2001, Dobre ohranjeno, rabljeno stanje
Malo delovnih ur (1675 h)
Motor: 11 kW
Tlak: nastavljiv do največ 250 barov
Pretok do največ 220 kg/h
Bwjdpfxowcc D Rs Af Djn
Briket: 150x60 mm
Dimenzije stiskalnice: pribl. 2200x3000x1920 mm (D x Š x V)
Dimenzije krmilne omare: 500x1250x2120 mm (D x Š x V)
Teža pribl. 3000 kg
Mali oglas
Neckartailfingen
511 km
Stiskalnica za peletiranje
R 310
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2025, Requirements:
- Material must be free-flowing (less than 18 mm)
- Material must be pure, ash content less than 1% ATRO
Caution with: sand, stones, and minerals
Bwsdpfx Ajfbb Arof Den
- Compression is performed using press tongs
- Material must be dry, maximum 15% ATRO
New: Innovative combination of briquette and pellet
Options available at extra cost:
Plant engineering / mütek Systemtechnik:
- mütek Shredder MRZ size reduction technology
- Conveyor belts
- Overbelt magnets
- Extraction systems, optionally with rotary valve
- Screw conveyors
- Silos
- Control system integration of all types
- Semi-automatic packaging technology
+ 24h continuous operation possible
+ Compact design
+ High energy efficiency thanks to innovative hydraulics
+ Briquette density of up to ≥ 1 kg/l achievable *Details upon testing
Functionality:
The machine features a silo with agitator. Each of the 4 corners of the storage silo contains a vertical screw which compacts the material downward into the press chamber.
The machine operates with two cylinders, each pressing in two directions (either forward or backward movement of the cylinder). This results in 4 briquette outlets with 6 individual briquettes each.
*Ideal for automatic feeding of boilers
Format: Ø 30 mm
Throughput: up to max. 310 kg/h
Motor power: approx. 27 kW (total)
Dimensions: 3.1 x 2.3 x 2.2 m
Weight: 3.55 tons
Your advantages:
Compact briquette/pellet format allows firing of industrial combustion plants using screw conveyors
Fully automatic 24h operation possible
High energy efficiency
Briquettes/pellets with consistently high quality & density
For automatic feeding into industrial combustion plants
Small to medium quantities of wood chips originating from various processing industries (primarily wood, biomass, and more) can be optimally compacted. The small Ø 30 mm format offers an attractive alternative. Unlike conventional briquettes, these can be automatically fed into industrial combustion systems.
In addition to wood, a variety of other materials can also be processed without issue (various types of biomass & agricultural residues).
Mali oglas
San Pietro in Gu' (PD)
264 km
Tovornjak s kavljem za kontejnerje
IVECOIVECO TRAKKER 360 SCARRABILE 6X4
Pokliči
Stanje: rabljeno, prevoženi kilometri: 296.000 km, moč: 265 kW (360,30 KM), prva registracija: 03/2016, vrsta goriva: dizel, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2016, FRAME NO.: WJME2NPS70C330246
TITLE: IVECO TRAKKER 360 WITH NEW HOOKLIFT, FRONT AND REAR LEAF SUSPENSION, 6X4
REF.: 25C63
YEAR: 03/2016
HORSEPOWER: 360
DISPLACEMENT: 8,710 cc
EMISSION STANDARD: Euro 6
MILEAGE: 296,000 km
TRANSMISSION: Automatic
DIFFERENTIAL LOCK: Yes
RETARDER/INTARDER: No
AXLES: 3 (6x4)
WHEELBASE: 3,800 mm
TRAILER COUPLING: Yes
ORIGIN: Import
CAB: Short and low
SEATS: 2
Bjdpfxsyl N Dbj Af Down
PAYLOAD: 13,950 kg
- GROSS VEHICLE WEIGHT: 26,000 kg fully loaded / 33,000 kg construction use
- GROSS COMBINATION WEIGHT (TRUCK + TRAILER): 44,000 kg fully loaded / 56,000 kg construction use
BODY TYPE: New hooklift
HOOKLIFT MODEL: TAM T26.58
TELESCOPIC: Yes
SWIVEL: Yes
ROLLER: Vertical
ADR: Yes
BODYWORK CAPACITY:
FROM: 4.20 m + 0.20 m
TO: 6.10 m + 0.20 m
TOTAL LENGTH: 8.25 m
TOTAL LENGTH WITH CONTAINER: 8.55 m
EQUIPMENT:
- Air conditioning
- Crane hydraulic pre-installation
- Auxiliary hydraulic pre-installation
- Front and rear clamps
REFURBISHED: Yes
INSPECTED: Yes
TYRES: 100% new
PRICE: €86,500.00 + VAT
Errors and/or omissions excepted
The prices listed do not include VAT. Please contact our sales department for updated prices and conditions.
For further information:
Loris: +39 348 4773001
#thespecialistsofHooklifts
SCARRABILI AURORA
Specialists in the sale and purchase of industrial and commercial vehicles, primarily focused on the waste management sector.
Experts in trucks, trailers, and hooklift equipment.
Over 50 trucks and more than 150 hooklift bodies and containers, with and without cranes, ready for delivery.
E. & O. E.
Due to the high number of listings and details, Aurora invites you to verify the accuracy of the information with our sales staff.
Mali oglas
Schlüchtern
623 km
Stiskalnica za cevi
Parker82C 061
Pokliči
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Parker 82C 061 preša za cevi za cevi od 1/4" do 1 1/4" (odvisno od čeljusti za prešanje) s 5 kompleti čeljusti za prešanje (barve glej slike). Priložen je tudi hidravlični agregat Enerpac PUJ1200E ter rezalnik cevi TONE SM 210-SL, letnik 03/2016. Miza je vključena v ponudbo.
Naprave so bile preverjene glede funkcionalnosti in imajo izvedene elektro preglede s strani elektro podjetja.
Bedpfxjyy Spdj Af Dswn
Olajšamo vam iskanje: "lisec lisec stiskalnica za polnjenje s plinom fps-36/25u2t"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec






















































































































































































































































