Homag Pc Steuerung Ausgangskarte nakup rabljenega (7.452)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Working height: 900 mm Working width: 1,350 mm Abrasive belt exchange side: left Workpiece thickness: 3 – 160 mm Frequency-controlled feed speed: 4 – 20 m/min Abrasive belt dimensions: 2,620 x 1,350 – 1,380 mm Adjustable abrasive belt blow-off device, 5-stage adjustable WRD WORKPIECE CLEANING ROTOR Workpiece cleaning unit with 16 rotating nozzles MOBILE CONTROL TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM After activating the program, the machine automatically adjusts to 10 mm workpiece thickness and the blow-off rotors are activated. After complete cleaning of the feed belt, the machine returns to the initial setting. AAT EXTRACTION SLIDE VALVE CONTROL Control of extraction slide valves via the terminal (24 Volt DC, slide valves not included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PC Emergency power supply for the abrasive belt oscillation in case of power failure Configuration consists of: SANDTEQ W-700, PROFI SWB735/RRE – bottom sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces. The machine is prepared to accommodate up to two auxiliary units, such as cleaning brushes, finishing or structuring brushes, and rotating cleaning nozzles. Units: I. R-UNIT Sanding unit with automatically adjustable contact roller, profiled steel roller, 240 mm diameter, with grit compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt change and increased process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic abrasive belt tensioning with integrated abrasive belt edge compensation II. R-UNIT Sanding unit with automatically adjustable contact roller, rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grit compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E-UNIT Sanding unit prepared for a pressure beam Rcodpfx Aeyw Ndmjf Tob - Automatic locking of the sanding units for fast belt change and increased process reliability - Abrasive belt drives with electronic, wear-free brake - Optical, contactless abrasive belt control - Pneumatic abrasive belt tensioning with integrated abrasive belt edge compensation - Protected storage on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby mode to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing workpiece edge - Various sanding inserts, 80 mm wide with different felt hardness grades Machine dimensions L x W x H: 3,900 x 2,100 x 2,000 mm Machine weight approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – top sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces Units as above, with the addition of: FBM FINISHING BRUSH Brush unit with finishing brush Brush material: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions L x W x H: 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight approx. 6,500 kg

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood koda: RU0010622 - Koda proizvajalca: 2-083-01-0276 - Stanje: rabljeno - Funkcionalnost: ni testirano - Združljiv stroj: - Teža: 3 kg - Dimenzije: 36x26x21 cm - Če vas zanima, nudimo storitev pregleda, kontaktirajte nas. Rjdeyrq Aljpfx Af Tjcb

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: RU0010621 - Koda proizvajalca: 2-083-01-0278 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušeno - Združljiv stroj: - Teža: 3 kg - Dimenzije: 36x26x21 cm - V primeru zanimanja nudimo storitev pregleda, kontaktirajte nas. Rcodpjyrqzuofx Af Tsb

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: RU0006834 - Koda proizvajalca: 4-085-08-0202 - Stanje: Rabljeno - Funkcionalnost: Ni testirano - Kompatibilni stroj: - Teža: 10 kg - Dimenzije: 70x46x34 - Če ste zainteresirani, nudimo storitev pregleda, kontaktirajte nas. Rjdpfxeyrqyke Af Tjcb

Stanje: generalkompletno obnovljen (rabljeno), Ročni rezalniki za koruzo, 10 kos na prodajo - tip: A&K - rabljeni, obnovljeni - z 1 kosom nove rezalne glave Rsdpfx Aoyxnqbof Tscb - brez nožev FCA Debrecen

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ferwood koda: AGG0073 - Koda proizvajalca: 1-056-11-0660 - Stanje: Rabljeno - Funkcionalnost: Popolnoma delujoče - Kompatibilnost stroja: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Teža: 10 kg - Dimenzije: 46x39x27 - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. Rcsdeyrpxxepfx Af Tsb

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ferwood koda: AGG0073 - Koda proizvajalca: 1-056-11-0660 - Stanje: Rabljeno - Funkcionalnost: Popolnoma delujoče - Kompatibilnost stroja: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Teža: 10 kg - Dimenzije: 46x39x27 - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. Redeyrpw Ijpfx Af Tocb

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003572 - Koda proizvajalca: 2-007-03-3970 - Stanje: Kot novo (razstavni kos) - Funkcionalnost: Popolnoma delujoče - Združljivost z napravami: - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. 2KG - 36X26X21 Rcodpfx Ajyrn Ryef Teb

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003547 - Koda proizvajalca: 3-008-23-1410 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoč - Združljiv stroj: - V primeru zanimanja ponujamo storitev pregleda, kontaktirajte nas. 4KG 46X39X27 Rcedpfxjyrn I Es Af Tsb

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ferwood koda: RS0003546 - Koda proizvajalca: 3-812-08-5500 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoče - Kompatibilen stroj: - Če vas zanima, nudimo storitev revizije, kontaktirajte nas. 3KG 36X26X21 Rodpfoyrn Irox Af Tocb

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003545 - Koda proizvajalca: 2-025-15-2020 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoče - Združljiv stroj: - V primeru zanimanja nudimo storitev pregleda, kontaktirajte nas. 3KG 36X26X21 Rsdjyrn Ifepfx Af Tocb

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ferwood koda: RS0003544 - Koda proizvajalca: 2-025-15-2010 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoče - Združljiv stroj: - Po želji nudimo servisni pregled, kontaktirajte nas. 3KG 46X39X27 Rsdoyrn Hbspfx Af Tecb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, številka stroja/vozila: 0-250-95-6951, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 682 h, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, delovna širina: 1.415 mm, moč vretenovega motorja: 10.000 W, delovna dolžina: 3.100 mm, 2017 HOMAG Weeke Venture 115 CNC obrázovalni center v odličnem stanju. Rcsdoy S Dfbspfx Af Teb Stroj je bil zelo malo rabljen, z zelo nizkimi obratovalnimi urami glede na starost. Od prve namestitve je bil premaknjen samo enkrat. Trenutno je stroj nameščen, skalibriran in na voljo za ogled pod napetostjo. - 10 kW vreteno - Vrtalni agregat z 18 orodji in utornimi žagami - Večnamenska žaga z globino reza 118 mm - 22-mestna avtomatska menjava orodij - Pod & rail miza z LED prikazovalnikom pozicije Gre za čist in dobro vzdrževan stroj iz okolja z nizko uporabo, ni iz intenzivne serijske proizvodnje. Pomembna specifikacija: stroj omogoča 5-osno obdelavo, vendar dodatna programska licenca za 5-os ni vključena v prodajo. Licenco je mogoče dokupiti pri Homagu za dodatno plačilo, če je potrebno. Kupec je odgovoren za demontažo, nakladanje, transport in zavarovanje. Stroj je na voljo za demonstracijo na lokaciji po dogovoru.

Stanje: zelo dobro (rabljeno), Double-sided stand-alone machine (or can be used as the 1st and/or 2nd machine in a production line). Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 60 mm Working width (min/max): 240 / 2500 mm Control: PC 22 Feed speed (adjustable): 10–40 m/min Cam pitch: 500 mm EDGE PROCESSING (for each side): - Protection milling unit (pre-milling): 1 x 4.5 kW (hydro) - Chipping aggregate KD 11 (2 x 8.1 kW) hydro EDGE BANDING UNIT (for each side): - Gluing unit (hot melt + pre-melter): A3 + A34 - Edge magazine for rolls (slot no. 6) - Edge pressure zone “C” - Pre-milling unit: 2 x 0.55 kW - Milling unit MF 20 (2 x 0.55 kW) 20° Rjdpfx Aelikydjf Tscb - Profile scraping aggregate PN 20 - Finishing unit (flat scraper + buffing aggregate) FA 11 Free space

Stanje: zelo dobro (rabljeno), Double-sided single machine (first machine in a production line) Edgebanding material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 240 / 1000 Control / software: NC 21 / Homatic Feed speed (adjustable) m/min high speed: 10 - 60 Safety and soundproof cabins PROCESSING AREA (per side): Milling unit KD 10 (2 x 6.6 kW) EDGEBANDING AREA (per side): Gluing unit (hot-melt glue + premelter) A3 + A34 (high speed package) Pressure zone Edge magazine for rolls (compartment no.) 2 Pre-milling unit 2 x 0.55 kW Milling unit 2 x 0.55 kW (0° - 30°) Finish unit (scrapers + smoothing unit) FA 11 Rodpfx Ajifnxxjf Tocb Universal milling unit for grooving/rebating and profiling UF11 (1 x 4 kW) 0°-90°

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDE SIZING AND EDGE BANDING LINE, max. working width 2500 mm, equipped with automatic loading and stacking system, consisting of the following machines: X04004A) Loading gantry (with 2 loading stations) “BARGSTEDT” TBH 500/D/30/14 X04004B) Workpiece turning device (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDR31/25/12 X04004C) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004D) Separation station “BARGSTEDT” X04004E) Double-sided sizing and edge banding machine “HOMAG” Model KFR 620/19/QA/25 X04004F) 1st boring machine “WEEKE” Model BST 500 D X04004G) 2nd boring machine “WEEKE” Model BST 500 D Rcedelikvhepfx Af Teb X04004H) Workpiece turning device (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDR 51/25/12 X04004I) Motorized transfer conveyor “HOMAG” TR 10/70/12 X04004L) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004M) Stacking gantry (with 2 unloading stations) “BARGSTEDT” Model TSP 420/40/30/12 BA

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, številka stroja/vozila: 0-201-22-3325, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 5.800 mm, širina obdelovanca (maks.): 1.200 mm, model krmilnika: Homatic-CNC System PC83 mit Windows NT 4.0, hitrost pomika os X: 80 m/min, največja hitrost vretena: 18.000 obr/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item punctually on 20.03.2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: Saw and crosscutting unit for tool changer Drilling and milling unit (4 spindles) for tool changer Combined flush/radius milling and finishing unit for tool changer Air nozzle for workpiece edge for tool changer Attention: The scope of delivery includes only the units mentioned above. No vacuum suction cups, tools, or tool holders—possibly shown in the pictures—are included! TECHNICAL DETAILS Console clamping table "K": 12 movable consoles for holding vacuum cups with longitudinal and side stops, 4-fold occupancy Max. workpiece length with single set-up: 5,800 mm Max. workpiece length in pendulum mode: 2,200 mm Max. workpiece width: 1,200 mm Max. workpiece thickness (with standard 100mm high suction cups) with edge: 60 mm (when dust extraction hood is in position 1) Max. workpiece thickness (with standard 100mm high suction cups) without edge: 60 mm Max. workpiece thickness (with standard 100mm high suction cups) without edge: 120 mm (when dust extraction hood is in position 2) Support equipment Drilling head: 17 vertical spindles 2x main spindle 12 kW water-cooled for HSK (speed 18,000 rpm with C-axis and 12-position disk tool changer) Separate Y-axis for 2nd main spindle plus aggregate interface with integrated pneumatics and electrics Electronic supply and swivel drive C-axis: swivel range without limitation. Edge banding unit, 360°, for changeover into right main spindle Max. edge height: 65 mm Pickup station right for glueing unit storage Pre-cutting station and triple roll magazine Adapter units Combined flush/radius cutting and finishing unit (profile scraper) Saw and crosscutting unit Drill-milling unit, 4-spindle (crosshead) Air nozzle for workpiece edge MACHINE DETAILS Control: HOMATIC Control PC 83 with Windows (NT 4.0) Rsdpfxsyic Tuj Af Tjcb EQUIPMENT WOODWOP programming system version 5.0 Network connection Laser positioning aid Chip conveyor belt Safety: Foot mats at front, side safety guards, rear: installation against wall Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Edge banding machine from 2006. The HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, allowing for workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It is equipped with a single-sided edge banding unit capable of processing various edge materials up to 20 mm thick. If you are looking for high-quality edge processing solutions, consider the HOMAG Optimat KAL 330 edge banding machine that we have for sale. Contact us for further details. • Line workpiece capacity: • Length: 250–3000 mm • Width: 120–1200 mm • Thickness: 8–60 mm • Edge banding machine (KAL 330) – Base and transport Rjdpfxsytf Irj Af Tecb • Solid machine frame; extendable workpiece support with roller rail, ~800 mm • Transport chain, 80 mm wide with rubber pad; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed: 18–25 m/min • Working height: 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece offset/overhang: 30 mm • Workpiece thickness: 12–60 mm • Edge material from strip: 0.4–20 mm (max. cross-section 900 mm²) • Edge material from coil: 0.3–3 mm (max. cross-section: PVC 135 mm², veneer 100 mm²) • Max. coil diameter: 830 mm • Pneumatic connection: 7–8 bar • Feed system and control (integrated with KAL 330) • Flexible workpiece feed system wz10 for automatic feeding (longitudinal and transverse); for dimensionally accurate, square parts • Stepless adjustment of infeed guide (axis), speed adjustable at the entry terminal • Automatic lateral adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing • Entry terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granulate storage • Quick-change system for QA/QE application unit; QA front glue reservoir for color change • Base glue unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max. Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Milling unit HL84 with fixed milling fence for sensitive edges • Pneumatic milling motor adjustment (2 positions: flush/even and with overhang for contour milling) • Pneumatic bevel/straight switching; manual side milling fence adjustment for changing edge thickness • Rough trimming unit: 2 motors arranged vertically, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: rough trimming with approx. 0.2 mm overhang / without overhang • Reserved space for a fine trimming unit • Contour milling unit Servo FK13 automatic: • 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm • Servo-driven movements; automatic 8-position tool changer • Feed speed max. 20 m/min; minimum distance between workpieces: 500 mm • Workpiece thickness: 12–60 mm • Automatic FK adjustment for consistent radii with varying edge thicknesses; automatic retraction • FK workpiece guide with additional clamping for min. 120 mm workpiece length (single-sided) • Finishing and cleaning • Multi cleaning system MN21 automatic:

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 40 mm, največja debelina roba: 3 mm, hitrost pomika os X: 35 m/min, največja hitrost vrtenja: 12.000 obr/min, število mest v zalogovniku orodij: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 Rcsdpfx Asyqybuof Tsb 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 5321

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, model krmilnika: POWER CONTROL PC22, največja hitrost vrtenja: 12.000 obr/min, Auction extended by one week due to updated technical data! TECHNICAL DETAILS Workpiece Dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Gluing Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Adhesive container for EVA hot-melt glue Premelter for EVA hot-melt glue Edge Processing Unit 1 Redpeyqx U Hjfx Af Tjcb End trimming: available Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Top and bottom rough flush trimming: available Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for roughing: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Edge scraper Edge Processing Unit 6 Glue scraper Edge Processing Unit 7 Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Belt sanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Stanje: rabljeno, številka stroja/vozila: 006849, Type of attached edge: thin edge, thick edge, solid wood Gluing system: EVA Jointing milling: yes Multifunction unit: yes Rcodpfx Aewd Itmjf Tob Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 7 pcs

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Ta 4-osni HOMAG PROFI BMG 511/60/12/R je bil izdelan leta 2015. Gre za robusten CNC obdelovalni center z 18-pozicijskim menjavalcem orodij, vrtalno glavo s 30 vreteni in dinamično razporeditvijo delovne mize. Opremljen je z glavnim rezkalnim vretenom moči 12 kW in hitrostnim razponom do 24.000 vrt./min. Idealen je za zahtevna lesarska dela zaradi velikega delovnega območja 6.000 x 1.550 mm. Za več informacij o stroju nas kontaktirajte. Rcedpsx D Ra Hjfx Af Tob Vrste uporabe CNC obdelava lesa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Stroj HOMAG KAL 310/7/A3 je bil izdelan leta 2010. Gre za rabljen enostranski robni lepilni stroj z 28-pozicijskim ISAS magazinom robnih trakov, PU lepilno enoto in povratnim sistemom Boomerang. Vključuje spojno rezkalno enoto z dvema motorjema ter PU 34 lepilni sistem s kapaciteto do 6 kg/h. Idealen je za natančno lepljenje robov. Za več informacij o tej napravi nas kontaktirajte. Rcsdpfx Afsx D Ra Te Tjb Vrste uporabe Lepljenje robov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Stroj za lepljenje robov, izdelan leta 2009. Ta HOMAG PROFI KAR310/11/A20/S2 je opremljen s povratnim sistemom za obdelovance BARBARIC. Razmislite o priložnosti za nakup tega stroja za lepljenje robov HOMAG PROFI KAR310/11/A20/S2. Za več podrobnosti nas kontaktirajte. Rodpfx Afoyhqi Do Tscb • Stanje: rabljeno Dodatna oprema • BARBARIC povratni sistem za obdelovance

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), največja hitrost vretena: 8.000 obr/min, This HOMAG Optimat LPP306 was manufactured in 2019. The used planer and profiling machine is equipped with six working spindles and is capable of processing workpiece widths up to 250 mm and heights up to 160 mm. Featuring PowerControl and powerTouch LPP300 for enhanced control, it offers feed speeds from 6 to 24 m/min. Spindle speeds are adjustable up to 8,000 rpm, ensuring versatility and efficiency in wood milling applications. Please contact us for more information about this machine. • Processed workpiece width: 10–250 mm • Processed workpiece height: 10–160 mm • Control system: PowerControl with powerTouch LPP300 • Infeed table length: 2,500 mm • Feed speed: 6–24 m/min Spindles: • First bottom spindle: • Motor power: 7.5 kW (Siemens IE3) • Speed: 6,000 rpm • Spindle diameter: 40 mm • Spindle length: 281 mm • First right spindle: • Motor power: 7.5 kW, infinitely variable speed (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 176 mm • First left spindle: • Motor power: 7.5 kW, infinitely variable speed (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 176 mm • First top spindle: • Motor power: 7.5 kW, infinitely variable speed (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 266 mm Rcjdpsygvnpofx Af Tsb • Second top spindle: • Motor power: 7.5 kW, infinitely variable speed (Siemens IE3) • Speed range: 4,000–8,000 rpm • Second bottom spindle: • Motor power: 7.5 kW, infinitely variable speed (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 266 mm