Famad Grecon Kvh Linija Za Spajanje Z Mikro-Utori Kvh nakup rabljenega (99.797)

Stanje: zelo dobro (rabljeno), ENOSTRANSKA ROBNA LEPILKA (Leva) Debelina roba na kolutu (min/max) mm 0,3 / 3 Debelina roba v letvicah / trakcih (min/max) mm 0,4 / 20 Debelina plošče (min/max) mm 8 / 60 NOV (v 2024) krmilni sistem Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Podajalna hitrost do 25 m/min Uvajalni sistem EZ 14 Razpršilna enota (za tekoči premaz proti sprijemanju) Nastavljivo vodilno letev upravljano s CNC Enota za obrezovanje 2 x Kw 3 Lepilna enota (P.U.R. lepilo + predtalilnik) Cona za pritisk roba (CNC upravljanje) Magazin za robove v kolutih (predal št. 2) Kapa agregat HL 84 (2 x Kw 0,5 približno) Pnevmatsko nihanje in nastavitev Predrezalna enota BF 20 (2 x Kw 1,5 približno) Multifunkcijska enota (radiusno in oblikovno rezkanje) FK 11 (2 x Kw 0,4 približno) Profilni potezni noži Finish enota (ravni potezni noži + polirna enota) FA 11 Itodpfxsyyvp Uj Al Nof 203019) Št. 1 sistem za vračanje "LIGMATECH" Mod. ZHR 541/L/095 (s portalskim mostom in 360° vrtljivo sesalno glavo)

Stanje: zelo dobro (rabljeno), Für Platten mit den Maßen 5600 x 2600 (2700 mm), Dicke von 2 mm bis 60 mm - Nr. 2 Doppel-Deck-Zuführrollenbahnen, 1 x 6.000 mm lang und 1 x ca. 3.800 mm lang - Hydraulischer Hubtisch (ca. 5600 x 2700 mm) - System mit Gummirädern (11 oben + 11 unten) zum Andrücken und Zuführen der Platten - Fahrbare Traverse mit 45 Saugern und 5 Auflagearmen (zur Ausrichtung des Plattenstapels) - 1. Rückseitiger Schieber mit 11 Spannzangen - Drehtisch (für 90°-Drehung der Platte) mit Kunststoffrädern - 1. Plattensäge AH8 580 - max. Schnittbreite 5600 mm (max. Sägeblattüberstand 165 mm) - Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) - Hauptsägesystem (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) - Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 - 150 - Fahrbare Quertraverse mit 7 Schiebergeräten für geschnittene Platten - Mit 4 Auflagearmen (zur Ausrichtung des Plattenstapels) und 3 motorisierten Ketten - 2. Rückseitiger Schieber mit 25 (27) Spannzangen/Greifern - 2. Plattensäge - max. Schnittbreite 2700 mm (max. Sägeblattüberstand 165 mm) - Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) - Hauptsägesystem (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) - Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 - 150 - Restholzentsorgungssystem mit VECOPLAN-Zerkleinerer (55 kW) - Tisch mit Kunststoffbeschichtung für den Zuschnittauslauf Itedpfxexvc N Ds Al Nof - Stapelsystem für geschnittene Platten mit 2 vorderen Auflagetischen mit Luftausblassystem 400 x 6300 mm + 8 Hubtischen (4 x 1300 x 1600 mm und 4 x 1300 x 1410 mm) - Gesamtanschlusswert: 130 kVA

Stanje: zelo dobro (rabljeno), Power Control control system – CadMAtic 4 Professional software Roller conveyors for feeding the lifting table (mm 32,000) Lifting table (mm) 5,600 x 2,200 VAC infeed cart for gentle loading of sensitive single panels via vacuum 1st pusher saw with no. 6 collets Turning device (for panels) up to 90° 1st panel dividing saw, max. cutting width (mm) 5,600 (cutting line with air cushion) Max. saw blade protrusion (mm) 190 Scoring saw (max. saw diameter / power) mm 200 (kW 2.2) Main saw (max. saw diameter / power) mm 600 (kW 36) Adjustable saw carriage feed (QS) (m/min) 1–130 2nd pusher saw no. 14 with collets 2nd panel dividing saw, max. cutting width (mm) 2,200 (cutting line with air cushion) Max. saw blade protrusion (mm) 190 Scoring saw (max. saw diameter / power) mm 200 (kW 2.2) Main saw (max. saw diameter / power) mm 600 (kW 36) Adjustable saw carriage feed (QS) (m/min) 1–130 Shaker trough, chip removal conveyor belt with cross-cutting unit (kW 19.5) Itodpfx Aljvnq H Ej Njf No. 2 front air-cushion tables (+ 1 additional and more) (mm 800 x 2,160) Rollers in flocked design for highly sensitive materials Automatic stacking (No. 2 transfer tables: No. 2 x Liftomat HAU-A 25/12) Automatic stacking system with 8 stations

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, število ravnalnih valjev: 6, širina transportnega traku: 1.300 mm, najv. debelina jeklene pločevine: 1 mm, širina tuljave: 1.250 mm, dolžina rezanja (maks.): 6.400 mm, premer ravnalnega valja: 70 mm, potrebna širina: 3.500 mm, zahteva za prostor dolžina: 18.275 mm, potrebna višina: 4.000 mm, Enoosebno upravljanje, hiter dostop do številnih različnih pločevin, avtomatska menjava pločevine, standardne pločevine ostajajo nameščene na napravi; zgornje pločevine so manj pogoste vrste; varna rešitev pomične vzpenjalne pomoči za nakladanje zgornjih odvijalnih enot; programabilna razrezovalna naprava z 8 pari nožev v stacionarni izvedbi; rezalni noži so izmenično razporejeni za rezanje z majhnim zvijanjem; krožni noži AL p s premerom 100 mm za čim manjši rez; 7,2 m dolg trak za izvoz trakov Itjdexwc E Ijpfx Al Nef Tehniška risba naprave v pdf je predstavljena zrcalno!

Stanje: rabljeno, Leto izdelave: 1977, Profile height 60 mm 60 Machine weight approx. 188 kg Isdsp Raitopfx Al Njtf Space requirement approx. 0.85 x 0.45 x 1.25 m - Factory No.: 292539 - Pneumatic clamping device

Stanje: rabljeno, Sheet width: 1020 mm Sheet thickness: 2.5 mm Max. bending angle: 135° Stroke of upper beam: 25 mm Machine weight: approx. 285 kg Space requirement: approx. 1.35 x 0.85 x 1.20 m Iodpfowcg D Isx Al Nstf PRICE: EUR 2,045 - with inclined, segmented upper beam - Segment split: 25-30-35-40-45-50-75-100-150-200-270 - Clamping operated by foot

Stanje: novo, x-axis travel: 3000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump power for flushing: 37 kW Control system: Siemens PLC touch screen, directly usable DXF files Output pressure: max. 5500 bar Abrasive feed system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor to monitor abrasive supply to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is compressed to pressures of up to 5500 bar. Depending on the requirement and the workpiece, this is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. As the waterjet technology processes materials without heat input, no deformations occur. By adding an abrasive, waterjet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible manufacturing allows for both vertical and angled cuts. We are happy to accept your individual CAD data. Waterjet technology offers great advantages for industry, trades, and custom prototype production. It also scores points in terms of environmental impact, as the waterjet process operates dust- and steam-free and is material-efficient. Waterjet Cutting: Sample Gallery What already sounds impressive in theory is even more remarkable on the finished object. We have compiled a selection of images to demonstrate our capabilities with waterjet cutting. Browse through our sample gallery to get an impression of the possibilities offered by this modern machining process. Waterjet will also find the right solution for your project! Advantages - No deformations in the cut area - Cutting without thermal influence - Material-saving - High precision: +/- 0.1 mm - Cutting area: x = 3010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and angled cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, steam- and dust-free We cut everything All materials formed to shape: - Aluminum - Steel Isdshqnl Topfx Al Notf - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble - Tiles - Composites - Promat cutouts - Rubber - Plastics - Plexiglass Optional: Oil cooler ..... €10,725.00 Water filter system..... €1,430.00 Sludge extraction system ..... €10,725.00 Professional water treatment system..... €10,725.00 An oil cooler must be present during commissioning!!! Necessary for operation longer than 1 hour. Further videos:

Stanje: novo, x-axis travel: 4000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump output for flushing: 37 kW Control: Siemens PLC touch screen, direct import of usable DXF files Max. output pressure: 5500 bar Abrasive delivery system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor for monitoring abrasive feed to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is pressurized up to 5500 bar. Depending on the requirements and workpiece, it is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. Since the waterjet process works without heat input, material deformation is avoided. By adding abrasive, waterjet cutting achieves maximum precision with tolerances of +/- 0.01 mm. Our flexible production enables both vertical and bevel cuts. We are happy to receive your custom CAD files. Waterjet technology provides significant advantages for industry, trade, and custom prototyping. It is also environmentally friendly as waterjet cutting operates dust-free and steam-free, while also conserving material. Waterjet cutting: example gallery What already sounds impressive in theory is even more striking in the finished product. We have compiled a selection of images to demonstrate our capabilities in waterjet cutting. Click through our sample gallery to see what is possible with this modern processing technology. Waterjet will find the ideal solution for your application! Advantages - No deformation in the cutting area - Cutting without thermal input - Material saving - High precision: +/- 0.1 mm - Cutting area: x = 4010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and bevel cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, dust- and steam-free We cut everything! All materials shaped, including: - Aluminium - Steel - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble - Tiles - composites - Foam material cuts - Rubber - Plastics Iedod Ab Uuspfx Al Netf - Plexiglas Optional: Oil cooler                                                                € 10,725.00 Water filtration system                                              € 1,430.00 Sludge extraction system                                            € 10,725.00 Professional water treatment system                        € 10,725.00 An oil cooler must be present during commissioning!!! Operation for longer than 1 hour is only possible with an oil cooler.

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7816 TECHNICAL DATA DDCA - Maximum plank length: 85 mm - Minimum plank width: 180 mm - Maximum plank width: 845 mm - Minimum plank thickness: 10 mm - Maximum plank thickness: 45 mm - Spindle diameter: 30 mm - Maximum saw blade diameter: 250 mm - 5 spindles: - Left side: 1) Vertical upper spindle 2.2 kW 2) Horizontal lower spindle 2.2 kW - Right side: 1) Vertical lower spindle 2.2 kW 2) Vertical upper spindle 2.2 kW 3) Horizontal lower spindle 2.2 kW - Spindles adjustable up/down, left/right - 2 material pressure rollers - Infinitely variable feed speed: 0–10 m/min - Spindle diameter (5x): 100 mm - Dimensions (L/W/H): 1870/2230/1320 mm DDGA - Maximum plank width: 130 mm - Maximum plank thickness: 100 mm - Spindle configuration: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - 6-knife heads mounted on upper and lower spindles - Spindle diameter: 40 mm - Moulding cutters mounted on right and left spindles, max diameter: 50 mm - Spindle diameter: 30 mm - 2 feed speeds: 4.9 kW - Central chain lubrication via oil pump - Spindle diameter (4x): 125 mm - Dimensions (L/W/H): 3100/1300/1700 mm ADVANTAGES Itjdpfxjyyy Ego Al Nof - Made in Poland - 5 spindles - Not repainted - Very good condition - Used production line - High quality, low price Net price: 52,900 PLN Net price: 12,600 EUR Net price calculated at 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Stanje: zelo dobro (rabljeno), Catalogue number: 7817 TECHNICAL DATA DDCA – Double-End Tenoner - Minimum slat width: 180mm - Maximum slat width: 850mm - Minimum slat height: 10mm - Maximum slat height: 45mm - Spindle diameter: 30mm - Maximum blade diameter: 250mm - 4 blades included 5 spindles: Left side: - 1) Vertical upper 2.2kW - 2) Horizontal lower 2.2kW Right side: - 1) Vertical lower 2.2kW - 2) Vertical upper 2.2kW - 3) Horizontal lower 2.2kW - Spindles adjustable up/down, left/right - Material hold-down: 2 pcs Itodpfx Aoyz Nr Sel Nef - Stepless feed speed adjustment: 0–10m/min - Central lubrication via oil pump - Pump motor: 2.2kW - Extraction port diameter: 5x100mm - Dimensions (LxWxH): 1900x2230x1530mm DDGA – Four-Sided Planer - Maximum slat width: 130mm - Maximum slat height: 10–60mm - Minimum workpiece length: 200mm Spindle arrangement: - 1) Bottom 5.5kW - 2) Right 5.5kW - 3) Left 5.5kW - 4) Top 5.5kW - Spindles adjustable up/down - Top & bottom spindle diameter: 40mm - Right & left spindle diameter: 30mm - 4 feed speeds: 13/20/26/40 m/min - Central chain lubrication via oil pump - Extraction port diameter: 4x120mm - Dimensions (LxWxH): 3200x1370x1830mm DBCA – Tenoner Feeder - Maximum feed speed: 40m/min - Maximum slat width: 150mm - Motor: 0.55kW - Overall dimensions (LxWxH): 2320x600x1150mm DBGA – Strip Feeder - Strip length: 200–600mm - Strip width: 30–120mm - Strip thickness: 10–40mm - Stepless feed speed adjustment: 10–40m/min - Motor: 0.75kW - Overall dimensions (LxWxH): 1500x500x980mm - Total weight: approx. 4900kg – Manufactured in Poland – DTR documentation included – 5 spindles – Unpainted – Very good condition – Used machine Net price: 63,900 PLN Net price: 15,200 EUR based on 4.2 EUR exchange rate (Prices may change with higher rate fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to identify the goods. We only resell products that have already been placed on the market by the manufacturer. We have no business connections with the manufacturer.

Stanje: dober (rabljeno), Leto izdelave: 2004, Stroj je v zelo dobrem stanju. Deli, ki so prikazani ločeno (v roki), niso priloženi. Iedpovkuqtefx Al Nstf

Stanje: dober (rabljeno), Kompletna linia do produkcji ravioli. Ijdpsub Diuofx Al Njtf

Stanje: dober (rabljeno), Stroj za pasterizacijo zelenjave. Itedperwn Hbefx Al Nsf

Stanje: skoraj kot novo (rabljeno), Stroj je v dobrem stanju, ni bil uporabljen. Laserska glava RAY TOOLS BM 110. Isdpewfglkefx Al Njtf

Stanje: dober (rabljeno), Leto izdelave: 2012, Stroj je v dobrem delovnem stanju. Itsdpoylx Hrofx Al Njf

Stanje: rabljeno, Leto izdelave: 2001, LISEC LINIJA ZA IZOLACIJSKO STEKLO – Leto 2001 Višina: 2500 mm Itjdpjywl Ihefx Al Njf - Ploščna stiskalnica - VHW-25/6M (Pralni stroj za steklo) - VL-1N/25 (Robot za tesnjenje) Skupna dolžina: 27 m

Stanje: rabljeno, Leto izdelave: 2000, Clamping force 900 kN Clamping plate 540x540 mm Distance between tie bars 350x350 mm Machine weight approx. 5.5 t Clamping stroke 280 mm Ejector force 60 kN Ejector stroke 70 mm Mould height 160-400 mm Tie bar diameter 65 mm Injection force 75 kN Injection stroke 130 mm Injection plunger diameter 50, 55, 60 mm Injection volume (DIN 24480) 119, 163, 214 cm³ Specific injection pressure 380, 315, 265 kp/cm² Corresponding parting face 236, 285, 340 cm² Withdraw stroke 150 mm Itjdpfsyzt D Ejx Al Njf Fully overhauled DAW 80 GO die casting machine with DataLogic control for use with zinc alloys. Excerpt from the general overhaul: - Machine upgrade with new control cabinet and new operator panel, including replacement of all electrical wiring - Renewal of hydraulics (blocks and valves) - Clamping unit overhaul Detailed information upon request The machine is equipped with the following options: - Motor-driven safety door, casting direction left - Chute cover at machine base (straight) - Standing operator panel - 1.0.2 Chute cover at machine base - 3.2.4 Multi-chamber holding and melting furnace with TOC pump - 3.2.1 Furnace control cabinet for furnace type Z - 4.0.1 Use of water-glycol - 4.2. (side) GO - 6.1.3.1 Wired signal interface for part removal (DISPO10) - 6.5.2 Equipment package RSD with switch - 7.2.2.2 Spraymotion 611 E with servo drive, single-circuit - 7.3.1 Release agent tank TD 20 - 7.4.0.3 Spray bar CR 275 Further options can be offered as agreed.

Stanje: zelo dobro (rabljeno), 4-sided SIZING AND EDGE BANDING LINE + THROUGHFEED BORING MACHINE Consisting of the following machines: A) "IMA" loading system (bridge design) with double pick-up station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for supplying panel stacks to the loader. B) 1st double-sided sizing and edge banding machine "IMA" model Combima/N/II/230/A/R3 (mm 1300) C) Panel turner (from longitudinal to transverse orientation) "IMA" D) 2nd double-sided sizing and edge banding machine "IMA" model Combima/II/740/B/R3+ (mm 3300) with KFA 30 (contour trimming unit for fine trimming) E) Throughfeed boring machine "IMA" model I-Magic (with 2 horizontal and 4 lower vertical boring supports) F) Motorized roller conveyor "IMA" G) Panel turner (from transverse to longitudinal orientation) "IMA" Itedpfx Ajyyb Suel Nof H) "IMA" stacking system (bridge design) with double stacking station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for transporting panel stacks away from the unloader.

Stanje: dober (rabljeno), Facom Jet voziček za orodje z 8 predali Iodpfx Ajyzt Nzel Notf Odlično stanje, orodja Facom. Proizvedeno v Franciji. Pribor po slikah. Cena je za celotno enoto.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Višina dovoda: 900 mm Širina dovoda: 300 – 800 mm Neželezne kovine: 0,6 – 0,8 mm ali 0,8 – 1,0 mm (navesti pred naročilom) Neželezne kovine: 1,0 – 1,2 mm (samo pri fasadnih profilih) Jeklo (320 N/mm²): 0,55 – 0,70 mm Nerjavno jeklo: maks. 0,5 mm 3.830 mm x 2.045 mm x 1.275 mm Itjdpsxwxdgsfx Al Nof 1.770 kg

Leto izdelave: 2025, obratovalne ure: 25 h, stanje: rabljeno, MDK 4000 je visokozmogljiv industrijski pralni in drobilni stroj, ki omogoča nežno, a učinkovito čiščenje sadja in zelenjave. Kombinacija mehkih pralnih ščetk ter sistema vpihavanja zraka zagotavlja temeljito čiščenje brez poškodovanja surovin. Vgrajeni transportni trak vodi izdelek skozi spiranje s svežo vodo do drobilne enote, kjer je mogoče nastaviti želeno stopnjo finega pireja. Naprava je idealna izbira za proizvodnjo sokov, pirejev in predelovalne obrate. Itjdpfeyykldjx Al Nof Tehnični podatki Kapaciteta: 4000 kg/uro Moč: 6 kW, 400 V, 16 A Upravljanje: zaslon na dotik Material: nerjaveče jeklo 1.4301 (AISI 304) Priključek za vodo: ¾” hitra spojka Poraba vode: 100–200 l/uro Hitrost traku: brezstopenjsko nastavljiva Raven hrupa: 60–70 dB Dimenzije (D x Š x V): 3820 × 1400 × 2200 mm Izhodna višina: 1300 mm Izvedba: enostavno čiščenje, zasnovano za industrijsko uporabo

Leto izdelave: 2024, stanje: pripravljen za uporabo (rabljen), Ponujamo 3-osni CNC stroj za toplotno rezanje cevi. Premer cevi: 60 mm–500 mm, pravokotni profili X/Y: 420 mm/420 mm, največja dolžina cevi: 4500 mm, največja debelina stene: 1 mm–20 mm, največja hitrost rezanja: 24000 mm/min, natančnost pozicioniranja: pribl. 0,5 mm, sila vpenjalnega vpenjala: 30000 N, največji navor: 13000 Nm, sistem za rezanje: Hypertherm Powermax 1650, krmiljenje: Burny 10 LCD Plus, dimenzije stroja X/Y/Z: pribl. 4000 mm/2000 mm/1800 mm. Krmiljenje ima napako in trenutno ni v funkciji. Ogled je možen po dogovoru. Itjdpfx Aljy Ax T Uj Njf

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), Na voljo je popolna polnilna linija z 12-mestnim gravitacijskim in tlačno-polnilnim strojem z integriranim zapiralcem Twist-Off za živilsko industrijo. Polnilna mesta: 12, konstrukcija: rotacijska, viskoznost tekočin: nizka-srednja, zmogljivost polnjenja: pribl. 2000 steklenic/uro, zmogljivost zapiranja: pribl. 1000–1200/uro, rezervoar: toplotno izoliran, prostornina rezervoarja: 35 l/50 l. Gre za popolno polnilno linijo, ki vključuje transportne trakove, zbirno mizo, senzoriko, vrtljive mize, črpalke in formatne dele. Linija je bila leta 2024 izključena iz obratovanja. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Itjdpfey Ax Ufjx Al Nef

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Sheet width: 3200 mm Sheet thickness: 3.0 mm (steel) Sheet thickness (stainless steel): 2.0 mm Opening width / upper beam: 300 mm OW speed: 40.0 mm/sec Bending beam adjustment: 80.0 mm Working height: 900 mm BW speed: 90.0 deg/sec Control: MULTIBEND 5000 Backgauge – adjustable: 10 - 1550 mm Accuracy: +/- 0.1 mm Air pressure: 5.0 bar Operating hours: approx. 1,000 h Voltage: 400 V Total power requirement: 2 x 4.0 kW Weight: 4,400 kg Dimensions (L-W-H): 4295 x 2225 x 1775 mm Original price: approx. €85,000 Machine with only around 1,000 operating hours (!!) Good condition (!!) Special price on request - Supplied in tested condition - Machine video - ?v=VP6emx4HTYM ! Maximum flexibility when bending panels, boxes, and profiles ! High flexibility in part design ! High productivity and throughput ! Easy to operate Equipment: - Motorized universal swivel bending machine "RAS 73.30" * High-precision mechanics with modern control technology * For single-piece and series production * Robust high-speed model with rapid axis movements * Torsion-resistant welded construction - RAS CNC control model "MULTIBEND 5000" * Material and tooling library * Swivels – front right * 1x emergency stop button Ijdpfxexabz Ts Al Nstf - CNC electro-motorized upper beam adjustment * Fast opening and closing speed * Programmable opening and closing height * Radius bending without special tools (multi-step bends) * Rigid upper beam for precise bends * 1x set RAS segmented upper tools, height 80 mm * RAS "Klick-In" tool system (pneumatic) - CNC electro-motorized bending beam adjustment * Rapid swinging motion: short production times * Crowning system compensates for deformation due to bending forces * 1x set RAS segmented bending tools - CNC electro-motorized backgauge * Quick positioning, high repeatability * Table sheets support the weight of the material * Table sheets made of stainless steel with ball rollers - 2x free-moving double foot switches - 1x RAS tool trolley for bending tools (mobile) - Operating manual (PDF) + original circuit diagram

Stanje: dober (rabljeno), moč: 140 kW (190,35 KM), vrsta goriva: dizel, barva: rumena, Leto izdelave: 2009, obratovalne ure: 15.423 h, Oprema: klimatska naprava, Allgemeine Informationen Verwendbares Material: Abfall Seriennummer: CATM325DCKAY00278 Antriebsstrang Antrieb: Rad Motormarke: C7DI Gewichte Leergewicht: 36.000 kg Funktionell CE-Kennzeichnung: ja Zustand Technischer Zustand: gut Optischer Zustand: gut Weitere Informationen Hochlöffel-/Schaufelstiellänge: 745 cm Reifengröße: 23.5R25 Emissionsniveau: Stage IIIA / Tier III Lieferbedingungen: EXW Transportabmessungen (L x B x H): 12x3,25x3,8 Iedpfx Ajyzl Eusl Netf Produktionsland: BE Weitere Informationen Wenden Sie sich an Jeroen Heindryckx, Bart Apers oder Matthias Eyckmans, um weitere Informationen zu erhalten. = Weitere Optionen und Zubehör = - Ausleger mit Rohrbruchventil -> Sicherheits-Rohrbruchventil - Ausleger/Winde - Automatisches Schmiersystem -> Auto-Schmiersystem - Batterietrennschalter - Hammer/Scherenhydraulik - Hang Hydraulik - Hochlöffel mit Rohrbruchventil -> Sicherheits-Rohrbruchventil - Hochlöffel-/Schaufelstiel - Kabinentyp: Aufsteigend / Mit Hubvorrichtung - Pratzenabstützung